[PATCH] Kconfig: Fix SYS_MALLOC_F_LEN for i.MX8MQ

[Tom Rini]

On Tue, Jul 05, 2022 at 05:20:46PM +0200, Heiko Thiery wrote:
> Hi Tom,
> 
> Am Di., 5. Juli 2022 um 15:35 Uhr schrieb Tom Rini <trini at konsulko.com>:
> >
> > On Tue, Jul 05, 2022 at 12:19:54PM +0200, Heiko Thiery wrote:
> > > Hi all,
> > >
> > > Am Mo., 11. Apr. 2022 um 14:29 Uhr schrieb Tom Rini <trini at konsulko.com>:
> > > >
> > > > On Mon, Apr 11, 2022 at 05:07:04PM +0800, Peng Fan (OSS) wrote:
> > > >
> > > > > From: Peng Fan <peng.fan at nxp.com>
> > > > >
> > > > > i.MX8MQ use SYS_MALLOC_F_LEN 0x2000, not 0x10000. The OCRAM_S only has
> > > > > 32KB memory, use 0x10000 will make SPL not bootable.
> > > > >
> > > > > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > > > > Reviewed-by: Michael Trimarchi <michael at amarulasolutions.com>
> > > > > Reviewed-by: Fabio Estevam <festevam at denx.de>
> > > > > ---
> > > > >  Kconfig | 6 ++++--
> > > > >  1 file changed, 4 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/Kconfig b/Kconfig
> > > > > index 6b1ddfc549e..3e95ec9d7b9 100644
> > > > > --- a/Kconfig
> > > > > +++ b/Kconfig
> > > > > @@ -251,8 +251,10 @@ config SYS_MALLOC_F_LEN
> > > > >       default 0x4000 if SANDBOX || RISCV
> > > > >       default 0x2000 if (ARCH_MX7 || ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \
> > > > >                          ARCH_QEMU || ARCH_SUNXI || ARCH_OWL)
> > > > > -     default 0x10000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_LS1012A || \
> > > > > -                         ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A)
> > > > > +     default 0x10000 if (ARCH_IMX8 || (ARCH_IMX8M && !IMX8MQ) || \
> > > > > +                         ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \
> > > > > +                         ARCH_LS1046A)
> > > > > +     default 0x2000 if IMX8MQ
> > > > >       default 0x400
> > > > >       help
> > > > >         Before relocation, memory is very limited on many platforms. Still,
> > > >
> > > > Note that we can put this with the rest of the 0x2000 default instances.
> > > > And as an aside, imx8mq_phanbell_defconfig sets this to 0x4000.  That
> > > > said, I've applied this to master (with the location change I noted), thanks!
> > > >
> > > > --
> > > > Tom
> > >
> > > I just tested v2022.07-rc6 and noticed that by reducing the value the
> > > kontron pitx-imx8m (imx8mq) board does not start anymore. I locally
> > > increased the value to 0xc000 and the board works again.
> > >
> > > So should I increase the value just for this board or should I
> > > increase the default value for the IMX8MQ?
> >
> > I would _really_ like to see defaults per SoC.  Even if that means
> > saying "default 0xc000 if IMX8Q && SPL_FEAT_X" as I know with tight
> > constraints on memory AND the need to have some of the bigger feature
> > knobs enabled it can be tricky to get usable defaults.  But what I
> > really want to avoid are both the problem of everyone copy/pasting a
> > value that's too big or too small and also avoid the problem of N boards
> > needing the same fix because they all failed due to the same problem.
> 
> I understand your concerns but the value that has to be adjusted is
> not SPL_SYS_MALLOC_F_LEN. Therefore I'm not sure if the '&&
> SPL_FEAT_X' would be correct here.

Ah right, sorry.  So yes, it's even more likely we should be able to
come up with one default for the family.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20220705/673e5ba8/attachment.sig>