[PATCH v1 12/26] imx7s/d: synchronise device trees with linux
Marcel Ziswiler
marcel at ziswiler.com
Thu Jul 21 15:27:34 CEST 2022
From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Synchronise device tree with linux-next next-20220708.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
---
arch/arm/dts/imx7d-pico-hobbit.dts | 6 +-
arch/arm/dts/imx7d-pico-pi.dts | 6 +-
arch/arm/dts/imx7d-pico.dtsi | 103 +++++-
arch/arm/dts/imx7d-pinfunc.h | 14 +-
arch/arm/dts/imx7d-sdb.dts | 120 +++++-
arch/arm/dts/imx7d-smegw01.dts | 297 ++++++++++++++-
arch/arm/dts/imx7d.dtsi | 211 +++++++----
arch/arm/dts/imx7s-warp.dts | 70 +++-
arch/arm/dts/imx7s.dtsi | 472 +++++++++++++++---------
include/dt-bindings/clock/imx7d-clock.h | 13 +-
include/dt-bindings/power/imx7-power.h | 5 +-
11 files changed, 1021 insertions(+), 296 deletions(-)
diff --git a/arch/arm/dts/imx7d-pico-hobbit.dts b/arch/arm/dts/imx7d-pico-hobbit.dts
index 98604f0fa65..d917dc4f2f2 100644
--- a/arch/arm/dts/imx7d-pico-hobbit.dts
+++ b/arch/arm/dts/imx7d-pico-hobbit.dts
@@ -31,7 +31,7 @@
dailink_master: simple-audio-card,codec {
sound-dai = <&sgtl5000>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
@@ -41,7 +41,7 @@
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_vref_1v8>;
};
@@ -102,4 +102,4 @@
MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14
>;
};
-};
\ No newline at end of file
+};
diff --git a/arch/arm/dts/imx7d-pico-pi.dts b/arch/arm/dts/imx7d-pico-pi.dts
index 66ca59045f3..f263e391e24 100644
--- a/arch/arm/dts/imx7d-pico-pi.dts
+++ b/arch/arm/dts/imx7d-pico-pi.dts
@@ -31,7 +31,7 @@
dailink_master: simple-audio-card,codec {
sound-dai = <&sgtl5000>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
@@ -41,7 +41,7 @@
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_vref_1v8>;
};
@@ -90,4 +90,4 @@
>;
};
-};
\ No newline at end of file
+};
diff --git a/arch/arm/dts/imx7d-pico.dtsi b/arch/arm/dts/imx7d-pico.dtsi
index 57391fc0524..e0bff39e8d3 100644
--- a/arch/arm/dts/imx7d-pico.dtsi
+++ b/arch/arm/dts/imx7d-pico.dtsi
@@ -5,15 +5,44 @@
/dts-v1/;
#include "imx7d.dtsi"
-#include "imx7d-pico-u-boot.dtsi"
/ {
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 50000 0>;
+ brightness-levels = <0 36 72 108 144 180 216 255>;
+ default-brightness-level = <6>;
+ };
+
/* Will be filled by the bootloader */
memory at 80000000 {
device_type = "memory";
reg = <0x80000000 0>;
};
+ panel {
+ compatible = "vxt,vl050-8048nt-c01";
+ backlight = <&backlight>;
+ power-supply = <®_lcd_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_lcdreg_on>;
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_wlreg_on: regulator-wlreg_on {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -231,6 +260,18 @@
};
};
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif>;
+ status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
&sai1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1>;
@@ -261,6 +302,8 @@
};
&pwm4 { /* Backlight */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
};
@@ -308,7 +351,7 @@
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
bus-width = <4>;
- tuning-step = <2>;
+ fsl,tuning-step = <2>;
vmmc-supply = <®_3p3v>;
wakeup-source;
no-1-8-v;
@@ -389,7 +432,7 @@
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
- MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */
+ MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */
>;
};
@@ -414,21 +457,61 @@
>;
};
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x78
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x78
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x78
+ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14
+ >;
+ };
+
pinctrl_pwm1: pwm1 {
fsl,pins = <
- MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f
+ MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f
>;
};
pinctrl_pwm2: pwm2 {
fsl,pins = <
- MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f
+ MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f
>;
};
pinctrl_pwm3: pwm3 {
fsl,pins = <
- MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f
+ MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp{
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x7f
>;
};
@@ -578,9 +661,15 @@
>;
};
+ pinctrl_reg_lcdreg_on: reglcdongrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x59
+ >;
+ };
+
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
>;
};
-};
\ No newline at end of file
+};
diff --git a/arch/arm/dts/imx7d-pinfunc.h b/arch/arm/dts/imx7d-pinfunc.h
index f2493bc63da..69f2c1ec825 100644
--- a/arch/arm/dts/imx7d-pinfunc.h
+++ b/arch/arm/dts/imx7d-pinfunc.h
@@ -1,10 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef __DTS_IMX7D_PINFUNC_H
@@ -592,11 +588,11 @@
#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x06FC 0x0 0x2
#define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0130 0x03A0 0x0000 0x0 0x0
#define MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x0130 0x03A0 0x05DC 0x1 0x0
-#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x0000 0x2 0x0
+#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x06C4 0x2 0x0
#define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3 0x0130 0x03A0 0x0000 0x3 0x0
#define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN 0x0130 0x03A0 0x0000 0x4 0x0
#define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x0130 0x03A0 0x0000 0x5 0x0
-#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0000 0x6 0x0
+#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0574 0x6 0x1
#define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0134 0x03A4 0x0000 0x0 0x0
#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0134 0x03A4 0x06FC 0x0 0x3
#define MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x0134 0x03A4 0x05E0 0x1 0x0
@@ -1112,13 +1108,13 @@
#define MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 0x0250 0x04C0 0x0000 0x5 0x0
#define MX7D_PAD_ENET1_RGMII_TD3__CAAM_RNG_OSC_OBS 0x0250 0x04C0 0x0000 0x7 0x0
#define MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x0254 0x04C4 0x0000 0x0 0x0
-#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC 0x0254 0x04C4 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC 0x0254 0x04C4 0x06A4 0x2 0x1
#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPT2_COMPARE1 0x0254 0x04C4 0x0000 0x3 0x0
#define MX7D_PAD_ENET1_RGMII_TX_CTL__EPDC_PWR_CTRL2 0x0254 0x04C4 0x0000 0x4 0x0
#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0254 0x04C4 0x0000 0x5 0x0
#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x0258 0x04C8 0x0000 0x0 0x0
#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_TX_ER 0x0258 0x04C8 0x0000 0x1 0x0
-#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK 0x0258 0x04C8 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK 0x0258 0x04C8 0x069C 0x2 0x1
#define MX7D_PAD_ENET1_RGMII_TXC__GPT2_COMPARE2 0x0258 0x04C8 0x0000 0x3 0x0
#define MX7D_PAD_ENET1_RGMII_TXC__EPDC_PWR_CTRL3 0x0258 0x04C8 0x0000 0x4 0x0
#define MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x0258 0x04C8 0x0000 0x5 0x0
diff --git a/arch/arm/dts/imx7d-sdb.dts b/arch/arm/dts/imx7d-sdb.dts
index ea2e58dd5aa..78f4224a9bf 100644
--- a/arch/arm/dts/imx7d-sdb.dts
+++ b/arch/arm/dts/imx7d-sdb.dts
@@ -1,7 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2017 NXP
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
/dts-v1/;
@@ -46,7 +45,7 @@
pinctrl-0 = <&pinctrl_spi4>;
gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
num-chipselects = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -147,6 +146,31 @@
};
};
};
+
+ sound {
+ compatible = "fsl,imx7d-evk-wm8960",
+ "fsl,imx-audio-wm8960";
+ model = "wm8960-audio";
+ audio-cpu = <&sai1>;
+ audio-codec = <&codec>;
+ hp-det-gpio = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+ audio-routing =
+ "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "Ext Spk", "SPK_LP",
+ "Ext Spk", "SPK_LN",
+ "Ext Spk", "SPK_RP",
+ "Ext Spk", "SPK_RN",
+ "LINPUT1", "AMIC",
+ "AMIC", "MICB";
+ };
+
+ sound-hdmi {
+ compatible = "fsl,imx-audio-sii902x";
+ model = "sii902x-audio";
+ audio-cpu = <&sai3>;
+ hdmi-out;
+ };
};
&adc1 {
@@ -163,17 +187,21 @@
cpu-supply = <&sw1a_reg>;
};
+&cpu1 {
+ cpu-supply = <&sw1a_reg>;
+};
+
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
- cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
tsc2046 at 0 {
compatible = "ti,tsc2046";
reg = <0>;
spi-max-frequency = <1000000>;
- pinctrl-names ="default";
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc2046_pendown>;
interrupt-parent = <&gpio2>;
interrupts = <29 0>;
@@ -357,9 +385,16 @@
codec: wm8960 at 1a {
compatible = "wlf,wm8960";
reg = <0x1a>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
clock-names = "mclk";
wlf,shared-lrclk;
+ wlf,hp-cfg = <2 2 3>;
+ wlf,gpio-cfg = <1 3>;
+ assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
+ <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+ <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <0>, <884736000>, <12288000>;
};
};
@@ -375,6 +410,41 @@
};
};
+&pcie {
+ reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+®_1p0d {
+ vin-supply = <&sw2_reg>;
+};
+
+®_1p2 {
+ vin-supply = <&sw2_reg>;
+};
+
+&sai1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1>;
+ assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+ <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+ <&clks IMX7D_SAI1_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <0>, <884736000>, <36864000>;
+ status = "okay";
+};
+
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3 &pinctrl_sai3_mclk>;
+ assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
+ <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+ <&clks IMX7D_SAI3_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <0>, <884736000>, <36864000>;
+ status = "okay";
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -534,6 +604,7 @@
pinctrl_hog: hoggrp {
fsl,pins = <
MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
+ MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x59 /* headphone detect */
>;
};
@@ -599,6 +670,33 @@
>;
};
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f
+ MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
+ MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f
+ MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
+ MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f
+ MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f
+ MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x30
+ MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x1f
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x1f
+ MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x1f
+ MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x30
+ >;
+ };
+
pinctrl_spi4: spi4grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59
@@ -760,4 +858,10 @@
MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14
>;
};
+
+ pinctrl_sai3_mclk: sai3grp_mclk {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK 0x1f
+ >;
+ };
};
diff --git a/arch/arm/dts/imx7d-smegw01.dts b/arch/arm/dts/imx7d-smegw01.dts
index aefc654ad87..546268b8d0b 100644
--- a/arch/arm/dts/imx7d-smegw01.dts
+++ b/arch/arm/dts/imx7d-smegw01.dts
@@ -5,6 +5,7 @@
// Copyright (C) 2021 Fabio Estevam <festevam at denx.de>
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "imx7d.dtsi"
/ {
@@ -14,6 +15,9 @@
aliases {
mmc0 = &usdhc1;
mmc1 = &usdhc3;
+ mmc2 = &usdhc2;
+ rtc0 = &i2c_rtc;
+ rtc1 = &snvs_rtc;
};
chosen {
@@ -24,6 +28,79 @@
device_type = "memory";
reg = <0x80000000 0x20000000>;
};
+
+ reg_lte_on: regulator-lte-on {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lte_on>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "lte_on";
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_lte_nreset: regulator-lte-nreset {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lte_nreset>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "LTE_nReset";
+ gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_wifi: regulator-wifi {
+ compatible = "regulator-fixed";
+ gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi>;
+ regulator-name = "wifi_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_wlan_rfkill: regulator-wlan-rfkill {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-2 = <&pinctrl_rfkill>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "wlan_rfkill";
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_usbotg_vbus: regulator-usbotg-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_pwr_gpio>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 05 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ sram at 0 {
+ compatible = "microchip,48l640";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <16000000>;
+ };
};
&fec1 {
@@ -43,28 +120,109 @@
#size-cells = <0>;
ethphy0: ethernet-phy at 1 {
- compatible = "ethernet-phy-ieee802.3-c22";
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
reg = <1>;
+ reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ };
+
+ ethphy1: ethernet-phy at 2 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
};
};
};
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy1>;
+ fsl,magic-packet;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 =<&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ i2c_rtc: rtc at 52 {
+ compatible = "microcrystal,rv3028";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc_int>;
+ reg = <0x52>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_lpsr>;
+ dr_mode = "otg";
+ vbus-supply = <®_usbotg_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2>;
+ dr_mode = "host";
+ status = "okay";
+};
+
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
no-1-8-v;
- enable-sdio-wakeup;
+ wakeup-source;
keep-power-in-suspend;
status = "okay";
};
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+ vmmc-supply = <®_wifi>;
+ wakeup-source;
+ status = "okay";
+};
+
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
@@ -76,13 +234,10 @@
bus-width = <8>;
fsl,tuning-step = <1>;
non-removable;
- cap-sd-highspeed;
cap-mmc-highspeed;
cap-mmc-hw-reset;
mmc-hs200-1_8v;
mmc-ddr-1_8v;
- sd-uhs-ddr50;
- sd-uhs-sdr104;
status = "okay";
};
@@ -94,6 +249,15 @@
};
&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x04
+ MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x04
+ MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x04
+ MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x04
+ >;
+ };
+
pinctrl_enet1: enet1grp {
fsl,pins = <
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5
@@ -102,7 +266,7 @@
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x5
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x5
MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x5
- MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5
MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x5
MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x5
MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x5
@@ -113,6 +277,69 @@
>;
};
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x5
+ MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x5
+ MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x5
+ MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x5
+ MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x5
+ MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x5
+ MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x5
+ MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x5
+ MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x5
+ MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x5
+ MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x5
+ MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x5
+ MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x08
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x40000004
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x40000004
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x0b0b0
+ MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x0b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x0b0b0
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x0b0b0
+ >;
+ };
+
+ pinctrl_lte_on: lteongrp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x17059
+ >;
+ };
+
+ pinctrl_lte_nreset: ltenresetgrp {
+ fsl,pins = <
+ MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x17059
+ >;
+ };
+
+ pinctrl_rfkill: rfkillrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x17059
+ >;
+ };
+
+ pinctrl_rtc_int: rtcintgrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x17059
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x74
@@ -120,7 +347,38 @@
>;
};
- pinctrl_usdhc1: usdhc1 {
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x7c
+ MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x74
+ >;
+ };
+
+ pinctrl_usbotg1_lpsr: usbotg1 {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x04
+ >;
+ };
+
+ pinctrl_usbotg1_pwr: usbotg1-pwr {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR 0x04
+ >;
+ };
+
+ pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpio {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x04
+ >;
+ };
+
+ pinctrl_usbotg2: usbotg2grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x04
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59
MX7D_PAD_SD1_CMD__SD1_CMD 0x59
@@ -132,7 +390,19 @@
>;
};
- pinctrl_usdhc3: usdhc3 {
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x19
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x59
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
+ MX7D_PAD_SD2_CD_B__SD2_CD_B 0x08
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5d
MX7D_PAD_SD3_CLK__SD3_CLK 0x1d
@@ -148,7 +418,7 @@
>;
};
- pinctrl_usdhc3_100mhz: usdhc3_100mhz {
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5e
MX7D_PAD_SD3_CLK__SD3_CLK 0x1e
@@ -164,7 +434,7 @@
>;
};
- pinctrl_usdhc3_200mhz: usdhc3_200mhz {
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5f
MX7D_PAD_SD3_CLK__SD3_CLK 0x0f
@@ -179,6 +449,13 @@
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1f
>;
};
+
+ pinctrl_wifi: wifigrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x04
+ MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x04
+ >;
+ };
};
&iomuxc_lpsr {
diff --git a/arch/arm/dts/imx7d.dtsi b/arch/arm/dts/imx7d.dtsi
index 75566c780a4..7ceb7c09f7a 100644
--- a/arch/arm/dts/imx7d.dtsi
+++ b/arch/arm/dts/imx7d.dtsi
@@ -1,60 +1,25 @@
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Freescale Semiconductor, Inc.
+// Copyright 2016 Toradex AG
#include "imx7s.dtsi"
+#include <dt-bindings/reset/imx7-reset.h>
/ {
aliases {
- ethernet1 = &fec2;
+ usb0 = &usbotg1;
+ usb1 = &usbotg2;
+ usb2 = &usbh;
};
+
cpus {
cpu0: cpu at 0 {
- operating-points = <
- /* KHz uV */
- 996000 1075000
- 792000 975000
- >;
clock-frequency = <996000000>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ nvmem-cells = <&fuse_grade>;
+ nvmem-cell-names = "speed_grade";
};
cpu1: cpu at 1 {
@@ -62,10 +27,58 @@
device_type = "cpu";
reg = <1>;
clock-frequency = <996000000>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&cpu_sleep_wait>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-792000000 {
+ opp-hz = /bits/ 64 <792000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <150000>;
+ opp-supported-hw = <0xd>, <0x7>;
+ opp-suspend;
+ };
+
+ opp-996000000 {
+ opp-hz = /bits/ 64 <996000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <150000>;
+ opp-supported-hw = <0xc>, <0x7>;
+ opp-suspend;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1225000>;
+ clock-latency-ns = <150000>;
+ opp-supported-hw = <0x8>, <0x3>;
+ opp-suspend;
};
};
- soc {
+ usbphynop2: usbphynop2 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_PHY2_CLK>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
+ };
+
+ soc: soc {
etm at 3007d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0x3007d000 0x1000>;
@@ -80,24 +93,77 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etm1_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port1>;
+ };
};
};
};
+
+ intc: interrupt-controller at 31001000 {
+ compatible = "arm,cortex-a7-gic";
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&intc>;
+ reg = <0x31001000 0x1000>,
+ <0x31002000 0x2000>,
+ <0x31004000 0x2000>,
+ <0x31006000 0x2000>;
+ };
+
+ pcie: pcie at 33800000 {
+ compatible = "fsl,imx7d-pcie";
+ reg = <0x33800000 0x4000>,
+ <0x4ff00000 0x80000>;
+ reg-names = "dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000>, /* downstream I/O */
+ <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
+ num-lanes = <1>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ /*
+ * Reference manual lists pci irqs incorrectly
+ * Real hardware ordering is same as imx6: D+MSI, C, B, A
+ */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
+ <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
+ <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
+ clock-names = "pcie", "pcie_bus", "pcie_phy";
+ assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
+ <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
+ <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+
+ fsl,max-link-speed = <2>;
+ power-domains = <&pgc_pcie_phy>;
+ resets = <&src IMX7_RESET_PCIEPHY>,
+ <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
+ <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
+ reset-names = "pciephy", "apps", "turnoff";
+ fsl,imx7d-pcie-phy = <&pcie_phy>;
+ status = "disabled";
+ };
};
};
&aips2 {
- epdc: epdc at 306f0000 {
- compatible = "fsl,imx7d-epdc";
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x306f0000 0x10000>;
- clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_EPDC_PIXEL_ROOT_CLK>;
- clock-names = "epdc_axi", "epdc_pix";
- epdc-ram = <&gpr 0x4 30>;
- status = "disabled";
+ pcie_phy: pcie-phy at 306d0000 {
+ compatible = "fsl,imx7d-pcie-phy";
+ reg = <0x306d0000 0x10000>;
+ status = "disabled";
};
};
@@ -119,36 +185,35 @@
reg = <0x30b20200 0x200>;
};
- usbphynop2: usbphynop2 {
- compatible = "usb-nop-xceiv";
- clocks = <&clks IMX7D_USB_PHY2_CLK>;
- clock-names = "main_clk";
- };
-
fec2: ethernet at 30bf0000 {
compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
reg = <0x30bf0000 0x10000>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ interrupt-names = "int0", "int1", "int2", "pps";
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ENET2_IPG_ROOT_CLK>,
<&clks IMX7D_ENET_AXI_ROOT_CLK>,
<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
- fsl,num-tx-queues=<3>;
- fsl,num-rx-queues=<3>;
+ fsl,num-tx-queues = <3>;
+ fsl,num-rx-queues = <3>;
+ fsl,stop-mode = <&gpr 0x10 4>;
status = "disabled";
};
};
-&ca_funnel_ports {
+&ca_funnel_in_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port at 1 {
reg = <1>;
ca_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out_port>;
};
};
diff --git a/arch/arm/dts/imx7s-warp.dts b/arch/arm/dts/imx7s-warp.dts
index f7ba2c0a24a..e8734d218b9 100644
--- a/arch/arm/dts/imx7s-warp.dts
+++ b/arch/arm/dts/imx7s-warp.dts
@@ -10,10 +10,11 @@
#include "imx7s.dtsi"
/ {
- model = "Warp i.MX7 Board";
- compatible = "warp,imx7s-warp", "fsl,imx7s";
+ model = "Element14 Warp i.MX7 Board";
+ compatible = "element14,imx7s-warp", "fsl,imx7s";
memory at 80000000 {
+ device_type = "memory";
reg = <0x80000000 0x20000000>;
};
@@ -54,6 +55,14 @@
regulator-always-on;
};
+ reg_peri_3p15v: regulator-peri-3p15v {
+ compatible = "regulator-fixed";
+ regulator-name = "peri_3p15v_reg";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "imx7-sgtl5000";
@@ -66,7 +75,7 @@
dailink_master: simple-audio-card,codec {
sound-dai = <&codec>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
@@ -76,6 +85,10 @@
assigned-clock-rates = <884736000>;
};
+&csi {
+ status = "okay";
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
@@ -120,6 +133,8 @@
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
+ regulator-boot-on;
+ regulator-always-on;
};
snvs_reg: vsnvs {
@@ -177,6 +192,27 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+
+ ov2680: camera at 36 {
+ compatible = "ovti,ov2680";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov2680>;
+ reg = <0x36>;
+ clocks = <&osc>;
+ clock-names = "xvclk";
+ reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ DOVDD-supply = <&sw2_reg>;
+ DVDD-supply = <&sw2_reg>;
+ AVDD-supply = <®_peri_3p15v>;
+
+ port {
+ ov2680_to_mipi: endpoint {
+ remote-endpoint = <&mipi_from_sensor>;
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ };
+ };
+ };
};
&i2c3 {
@@ -196,7 +232,7 @@
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1_mclk>;
VDDA-supply = <&vgen4_reg>;
@@ -210,6 +246,22 @@
};
};
+&mipi_csi {
+ clock-frequency = <166000000>;
+ status = "okay";
+
+ ports {
+ port at 0 {
+ reg = <0>;
+
+ mipi_from_sensor: endpoint {
+ remote-endpoint = <&ov2680_to_mipi>;
+ data-lanes = <1>;
+ };
+ };
+ };
+};
+
&sai1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1>;
@@ -276,6 +328,10 @@
status = "okay";
};
+&video_mux {
+ status = "okay";
+};
+
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
@@ -330,6 +386,12 @@
>;
};
+ pinctrl_ov2680: ov2660grp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x14
+ >;
+ };
+
pinctrl_sai1: sai1grp {
fsl,pins = <
MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1f
diff --git a/arch/arm/dts/imx7s.dtsi b/arch/arm/dts/imx7s.dtsi
index cf0206dd0f0..29148285f9f 100644
--- a/arch/arm/dts/imx7s.dtsi
+++ b/arch/arm/dts/imx7s.dtsi
@@ -1,51 +1,14 @@
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Freescale Semiconductor, Inc.
+// Copyright 2016 Toradex AG
#include <dt-bindings/clock/imx7d-clock.h>
#include <dt-bindings/power/imx7-power.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/imx7-reset.h>
#include "imx7d-pinfunc.h"
/ {
@@ -55,10 +18,8 @@
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
- * Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
- memory { device_type = "memory"; };
aliases {
gpio0 = &gpio1;
@@ -82,18 +43,31 @@
serial4 = &uart5;
serial5 = &uart6;
serial6 = &uart7;
- spi0 = &qspi1;
- spi1 = &ecspi1;
- spi2 = &ecspi2;
- spi3 = &ecspi3;
- spi4 = &ecspi4;
- ethernet0 = &fec1;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &ecspi3;
+ spi3 = &ecspi4;
+ usb0 = &usbotg1;
+ usb1 = &usbh;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ idle-states {
+ entry-method = "psci";
+
+ cpu_sleep_wait: cpu-sleep-wait {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <100>;
+ exit-latency-us = <50>;
+ min-residency-us = <1000>;
+ };
+ };
+
cpu0: cpu at 0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
@@ -101,6 +75,23 @@
clock-frequency = <792000000>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks IMX7D_CLK_ARM>;
+ cpu-idle-states = <&cpu_sleep_wait>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ nvmem-cells = <&fuse_grade>;
+ nvmem-cell-names = "speed_grade";
+ };
+ };
+
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-792000000 {
+ opp-hz = /bits/ 64 <792000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <150000>;
+ opp-supported-hw = <0xf>, <0xf>;
};
};
@@ -129,6 +120,7 @@
compatible = "usb-nop-xceiv";
clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
clock-names = "main_clk";
+ power-domains = <&pgc_hsic_phy>;
#phy-cells = <0>;
};
@@ -144,9 +136,9 @@
* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell"
*/
- compatible = "arm,coresight-replicator";
+ compatible = "arm,coresight-static-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
/* replicator output ports */
@@ -163,12 +155,11 @@
remote-endpoint = <&etr_in_port>;
};
};
+ };
- /* replicator input port */
- port at 2 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etf_out_port>;
};
};
@@ -177,11 +168,12 @@
timer {
compatible = "arm,armv7-timer";
+ arm,cpu-registers-not-fw-configured;
interrupt-parent = <&intc>;
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
};
soc: soc {
@@ -192,33 +184,28 @@
ranges;
funnel at 30041000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x30041000 0x1000>;
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ca_funnel_ports: ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel input ports */
- port at 0 {
- reg = <0>;
+ ca_funnel_in_ports: in-ports {
+ port {
ca_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out_port>;
};
};
- /* funnel output port */
- port at 2 {
- reg = <0>;
+ /* the other input ports are not connect to anything */
+ };
+
+ out-ports {
+ port {
ca_funnel_out_port0: endpoint {
remote-endpoint = <&hugo_funnel_in_port0>;
};
};
- /* the other input ports are not connect to anything */
};
};
@@ -229,28 +216,28 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etm0_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port0>;
+ };
};
};
};
funnel at 30083000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x30083000 0x1000>;
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel input ports */
port at 0 {
reg = <0>;
hugo_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ca_funnel_out_port0>;
};
};
@@ -258,18 +245,18 @@
port at 1 {
reg = <1>;
hugo_funnel_in_port1: endpoint {
- slave-mode; /* M4 input */
+ /* M4 input */
};
};
+ /* the other input ports are not connect to anything */
+ };
- port at 2 {
- reg = <0>;
+ out-ports {
+ port {
hugo_funnel_out_port0: endpoint {
remote-endpoint = <&etf_in_port>;
};
};
-
- /* the other input ports are not connect to anything */
};
};
@@ -279,20 +266,16 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
+ in-ports {
+ port {
etf_in_port: endpoint {
- slave-mode;
remote-endpoint = <&hugo_funnel_out_port0>;
};
};
+ };
- port at 1 {
- reg = <0>;
+ out-ports {
+ port {
etf_out_port: endpoint {
remote-endpoint = <&replicator_in_port0>;
};
@@ -306,10 +289,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etr_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ etr_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
@@ -320,17 +304,18 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
intc: interrupt-controller at 31001000 {
compatible = "arm,cortex-a7-gic";
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
#interrupt-cells = <3>;
interrupt-controller;
interrupt-parent = <&intc>;
@@ -431,14 +416,14 @@
gpio-ranges = <&iomuxc 0 139 16>;
};
- wdog1: wdog at 30280000 {
+ wdog1: watchdog at 30280000 {
compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
reg = <0x30280000 0x10000>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
};
- wdog2: wdog at 30290000 {
+ wdog2: watchdog at 30290000 {
compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
reg = <0x30290000 0x10000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -446,7 +431,7 @@
status = "disabled";
};
- wdog3: wdog at 302a0000 {
+ wdog3: watchdog at 302a0000 {
compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
reg = <0x302a0000 0x10000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
@@ -454,7 +439,7 @@
status = "disabled";
};
- wdog4: wdog at 302b0000 {
+ wdog4: watchdog at 302b0000 {
compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
reg = <0x302b0000 0x10000>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
@@ -462,52 +447,52 @@
status = "disabled";
};
- iomuxc_lpsr: iomuxc-lpsr at 302c0000 {
+ iomuxc_lpsr: pinctrl at 302c0000 {
compatible = "fsl,imx7d-iomuxc-lpsr";
reg = <0x302c0000 0x10000>;
fsl,input-sel = <&iomuxc>;
};
- gpt1: gpt at 302d0000 {
+ gpt1: timer at 302d0000 {
compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
reg = <0x302d0000 0x10000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
+ clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
<&clks IMX7D_GPT1_ROOT_CLK>;
clock-names = "ipg", "per";
};
- gpt2: gpt at 302e0000 {
+ gpt2: timer at 302e0000 {
compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
reg = <0x302e0000 0x10000>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
+ clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
<&clks IMX7D_GPT2_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
- gpt3: gpt at 302f0000 {
+ gpt3: timer at 302f0000 {
compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
reg = <0x302f0000 0x10000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
+ clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
<&clks IMX7D_GPT3_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
- gpt4: gpt at 30300000 {
+ gpt4: timer at 30300000 {
compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
reg = <0x30300000 0x10000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
+ clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
<&clks IMX7D_GPT4_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
- kpp: kpp at 30320000 {
+ kpp: keypad at 30320000 {
compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp";
reg = <0x30320000 0x10000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
@@ -515,18 +500,53 @@
status = "disabled";
};
- iomuxc: iomuxc at 30330000 {
+ iomuxc: pinctrl at 30330000 {
compatible = "fsl,imx7d-iomuxc";
reg = <0x30330000 0x10000>;
};
gpr: iomuxc-gpr at 30340000 {
compatible = "fsl,imx7d-iomuxc-gpr",
- "fsl,imx6q-iomuxc-gpr", "syscon";
+ "fsl,imx6q-iomuxc-gpr", "syscon",
+ "simple-mfd";
reg = <0x30340000 0x10000>;
+
+ mux: mux-controller {
+ compatible = "mmio-mux";
+ #mux-control-cells = <0>;
+ mux-reg-masks = <0x14 0x00000010>;
+ };
+
+ video_mux: csi-mux {
+ compatible = "video-mux";
+ mux-controls = <&mux 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ port at 0 {
+ reg = <0>;
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ csi_mux_from_mipi_vc0: endpoint {
+ remote-endpoint = <&mipi_vc0_to_csi_mux>;
+ };
+ };
+
+ port at 2 {
+ reg = <2>;
+
+ csi_mux_to_csi: endpoint {
+ remote-endpoint = <&csi_from_csi_mux>;
+ };
+ };
+ };
};
- ocotp: ocotp-ctrl at 30350000 {
+ ocotp: efuse at 30350000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,imx7d-ocotp", "syscon";
@@ -537,32 +557,19 @@
reg = <0x3c 0x4>;
};
- tempmon_temp_grade: temp-grade at 10 {
+ fuse_grade: fuse-grade at 10 {
reg = <0x10 0x4>;
};
};
- tempmon: tempmon {
- compatible = "fsl,imx7d-tempmon";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon =<&anatop>;
- nvmem-cells = <&tempmon_calib>,
- <&tempmon_temp_grade>;
- nvmem-cell-names = "calib", "temp_grade";
- clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
- };
-
anatop: anatop at 30360000 {
compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
- "syscon", "simple-bus";
+ "syscon", "simple-mfd";
reg = <0x30360000 0x10000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg_1p0d: regulator-vdd1p0d at 30360210 {
- reg = <0x30360210>;
+ reg_1p0d: regulator-vdd1p0d {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p0d";
regulator-min-microvolt = <800000>;
@@ -575,6 +582,30 @@
anatop-max-voltage = <1200000>;
anatop-enable-bit = <0>;
};
+
+ reg_1p2: regulator-vdd1p2 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd1p2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ anatop-reg-offset = <0x220>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0x14>;
+ anatop-min-voltage = <1100000>;
+ anatop-max-voltage = <1300000>;
+ anatop-enable-bit = <0>;
+ };
+
+ tempmon: tempmon {
+ compatible = "fsl,imx7d-tempmon";
+ interrupt-parent = <&gpc>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&fuse_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+ };
};
snvs: snvs at 30370000 {
@@ -591,24 +622,19 @@
clock-names = "snvs-rtc";
};
- snvs_poweroff: snvs-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&snvs>;
- offset = <0x38>;
- value = <0x60>;
- mask = <0x60>;
- };
-
snvs_pwrkey: snvs-powerkey {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_SNVS_CLK>;
+ clock-names = "snvs-pwrkey";
linux,keycode = <KEY_POWER>;
wakeup-source;
+ status = "disabled";
};
};
- clks: ccm at 30380000 {
+ clks: clock-controller at 30380000 {
compatible = "fsl,imx7d-ccm";
reg = <0x30380000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
@@ -618,7 +644,7 @@
clock-names = "ckil", "osc";
};
- src: src at 30390000 {
+ src: reset-controller at 30390000 {
compatible = "fsl,imx7d-src", "syscon";
reg = <0x30390000 0x10000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
@@ -638,11 +664,23 @@
#address-cells = <1>;
#size-cells = <0>;
- pgc_pcie_phy: pgc-power-domain at 1 {
+ pgc_mipi_phy: power-domain at 0 {
+ #power-domain-cells = <0>;
+ reg = <0>;
+ power-supply = <®_1p0d>;
+ };
+
+ pgc_pcie_phy: power-domain at 1 {
#power-domain-cells = <0>;
reg = <1>;
power-supply = <®_1p0d>;
};
+
+ pgc_hsic_phy: power-domain at 2 {
+ #power-domain-cells = <0>;
+ reg = <2>;
+ power-supply = <®_1p2>;
+ };
};
};
};
@@ -660,6 +698,7 @@
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_ADC_ROOT_CLK>;
clock-names = "adc";
+ #io-channel-cells = <1>;
status = "disabled";
};
@@ -669,10 +708,11 @@
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_ADC_ROOT_CLK>;
clock-names = "adc";
+ #io-channel-cells = <1>;
status = "disabled";
};
- ecspi4: ecspi at 30630000 {
+ ecspi4: spi at 30630000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
@@ -684,6 +724,34 @@
status = "disabled";
};
+ ftm1: pwm at 30640000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ reg = <0x30640000 0x10000>;
+ #pwm-cells = <3>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER1_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ ftm2: pwm at 30650000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ reg = <0x30650000 0x10000>;
+ #pwm-cells = <3>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+ <&clks IMX7D_FLEXTIMER2_ROOT_CLK>;
+ status = "disabled";
+ };
+
pwm1: pwm at 30660000 {
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
reg = <0x30660000 0x10000>;
@@ -728,6 +796,23 @@
status = "disabled";
};
+ csi: csi at 30710000 {
+ compatible = "fsl,imx7-csi";
+ reg = <0x30710000 0x10000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CSI_MCLK_ROOT_CLK>,
+ <&clks IMX7D_CLK_DUMMY>;
+ clock-names = "axi", "mclk", "dcic";
+ status = "disabled";
+
+ port {
+ csi_from_csi_mux: endpoint {
+ remote-endpoint = <&csi_mux_to_csi>;
+ };
+ };
+ };
+
lcdif: lcdif at 30730000 {
compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
reg = <0x30730000 0x10000>;
@@ -737,6 +822,37 @@
clock-names = "pix", "axi";
status = "disabled";
};
+
+ mipi_csi: mipi-csi at 30750000 {
+ compatible = "fsl,imx7-mipi-csi2";
+ reg = <0x30750000 0x10000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+ <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
+ <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+ clock-names = "pclk", "wrap", "phy";
+ power-domains = <&pgc_mipi_phy>;
+ phy-supply = <®_1p0d>;
+ resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ mipi_vc0_to_csi_mux: endpoint {
+ remote-endpoint = <&csi_mux_from_mipi_vc0>;
+ };
+ };
+ };
+ };
};
aips3: bus at 30800000 {
@@ -753,7 +869,7 @@
reg = <0x30800000 0x100000>;
ranges;
- ecspi1: ecspi at 30820000 {
+ ecspi1: spi at 30820000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
@@ -765,7 +881,7 @@
status = "disabled";
};
- ecspi2: ecspi at 30830000 {
+ ecspi2: spi at 30830000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
@@ -777,7 +893,7 @@
status = "disabled";
};
- ecspi3: ecspi at 30840000 {
+ ecspi3: spi at 30840000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
@@ -868,7 +984,7 @@
};
};
- crypto: caam at 30900000 {
+ crypto: crypto at 30900000 {
compatible = "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
@@ -879,19 +995,19 @@
<&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
clock-names = "ipg", "aclk";
- sec_jr0: jr0 at 1000 {
+ sec_jr0: jr at 1000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
};
- sec_jr1: jr1 at 2000 {
+ sec_jr1: jr at 2000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
};
- sec_jr2: jr1 at 3000 {
+ sec_jr2: jr at 3000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x3000 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -905,6 +1021,7 @@
clocks = <&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CAN1_ROOT_CLK>;
clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x10 1>;
status = "disabled";
};
@@ -915,6 +1032,7 @@
clocks = <&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CAN2_ROOT_CLK>;
clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x10 2>;
status = "disabled";
};
@@ -1002,6 +1120,25 @@
status = "disabled";
};
+ mu0a: mailbox at 30aa0000 {
+ compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+ reg = <0x30aa0000 0x10000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_MU_ROOT_CLK>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ mu0b: mailbox at 30ab0000 {
+ compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+ reg = <0x30ab0000 0x10000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_MU_ROOT_CLK>;
+ #mbox-cells = <2>;
+ fsl,mu-side-b;
+ status = "disabled";
+ };
+
usbotg1: usb at 30b10000 {
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
reg = <0x30b10000 0x200>;
@@ -1038,7 +1175,7 @@
reg = <0x30b30200 0x200>;
};
- usdhc1: usdhc at 30b40000 {
+ usdhc1: mmc at 30b40000 {
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
reg = <0x30b40000 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -1050,7 +1187,7 @@
status = "disabled";
};
- usdhc2: usdhc at 30b50000 {
+ usdhc2: mmc at 30b50000 {
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
reg = <0x30b50000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -1062,7 +1199,7 @@
status = "disabled";
};
- usdhc3: usdhc at 30b60000 {
+ usdhc3: mmc at 30b60000 {
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
reg = <0x30b60000 0x10000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -1074,12 +1211,12 @@
status = "disabled";
};
- qspi1: qspi at 30bb0000 {
- #address-cells = <1>;
- #size-cells = <0>;
+ qspi: spi at 30bb0000 {
compatible = "fsl,imx7d-qspi";
reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_QSPI_ROOT_CLK>,
<&clks IMX7D_QSPI_ROOT_CLK>;
@@ -1091,8 +1228,8 @@
compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_SDMA_CORE_CLK>,
- <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
+ clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+ <&clks IMX7D_SDMA_CORE_CLK>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
@@ -1106,15 +1243,16 @@
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ clocks = <&clks IMX7D_ENET1_IPG_ROOT_CLK>,
<&clks IMX7D_ENET_AXI_ROOT_CLK>,
<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
- fsl,num-tx-queues=<3>;
- fsl,num-rx-queues=<3>;
+ fsl,num-tx-queues = <3>;
+ fsl,num-rx-queues = <3>;
+ fsl,stop-mode = <&gpr 0x10 3>;
status = "disabled";
};
};
@@ -1132,7 +1270,7 @@
clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
};
- gpmi: gpmi-nand at 33002000{
+ gpmi: nand-controller at 33002000{
compatible = "fsl,imx7d-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h
index b2325d3e236..1d4c0dfe020 100644
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
@@ -1,10 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef __DT_BINDINGS_CLOCK_IMX7D_H
@@ -168,7 +164,7 @@
#define IMX7D_SPDIF_ROOT_SRC 155
#define IMX7D_SPDIF_ROOT_CG 156
#define IMX7D_SPDIF_ROOT_DIV 157
-#define IMX7D_ENET1_REF_ROOT_CLK 158
+#define IMX7D_ENET1_IPG_ROOT_CLK 158
#define IMX7D_ENET1_REF_ROOT_SRC 159
#define IMX7D_ENET1_REF_ROOT_CG 160
#define IMX7D_ENET1_REF_ROOT_DIV 161
@@ -176,7 +172,7 @@
#define IMX7D_ENET1_TIME_ROOT_SRC 163
#define IMX7D_ENET1_TIME_ROOT_CG 164
#define IMX7D_ENET1_TIME_ROOT_DIV 165
-#define IMX7D_ENET2_REF_ROOT_CLK 166
+#define IMX7D_ENET2_IPG_ROOT_CLK 166
#define IMX7D_ENET2_REF_ROOT_SRC 167
#define IMX7D_ENET2_REF_ROOT_CG 168
#define IMX7D_ENET2_REF_ROOT_DIV 169
@@ -455,5 +451,6 @@
#define IMX7D_SNVS_CLK 442
#define IMX7D_CAAM_CLK 443
#define IMX7D_KPP_ROOT_CLK 444
-#define IMX7D_CLK_END 445
+#define IMX7D_PXP_CLK 445
+#define IMX7D_CLK_END 446
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
diff --git a/include/dt-bindings/power/imx7-power.h b/include/dt-bindings/power/imx7-power.h
index 3a181e41051..597c1aa06ae 100644
--- a/include/dt-bindings/power/imx7-power.h
+++ b/include/dt-bindings/power/imx7-power.h
@@ -1,9 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2017 Impinj
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __DT_BINDINGS_IMX7_POWER_H__
--
2.35.1
More information about the U-Boot
mailing list