[PATCH v1 3/3] arm: dts: rockchip: rk3288: partial sync from Linux
Johan Jonker
jbx6244 at gmail.com
Sat Jul 30 01:49:10 CEST 2022
Partial sync of rk3288.dtsi from Linux version 5.18
Changed:
only properties and functions that are not yet included
swap some clocks positions
fix some irq numbers
style and sort nodes
Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
arch/arm/dts/rk3288-veyron-jerry.dts | 6 -
arch/arm/dts/rk3288-veyron.dtsi | 4 -
arch/arm/dts/rk3288.dtsi | 368 ++++++++++++++++++++++-----
3 files changed, 304 insertions(+), 74 deletions(-)
diff --git a/arch/arm/dts/rk3288-veyron-jerry.dts b/arch/arm/dts/rk3288-veyron-jerry.dts
index ff7669eb..40fee55c 100644
--- a/arch/arm/dts/rk3288-veyron-jerry.dts
+++ b/arch/arm/dts/rk3288-veyron-jerry.dts
@@ -137,12 +137,6 @@
};
};
- edp {
- edp_hpd: edp_hpd {
- rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
- };
- };
-
emmc {
/* Make sure eMMC is not in reset */
emmc_deassert_reset: emmc-deassert-reset {
diff --git a/arch/arm/dts/rk3288-veyron.dtsi b/arch/arm/dts/rk3288-veyron.dtsi
index 4a9c27a4..35db8827 100644
--- a/arch/arm/dts/rk3288-veyron.dtsi
+++ b/arch/arm/dts/rk3288-veyron.dtsi
@@ -560,10 +560,6 @@
status = "okay";
};
-&hdmi_audio {
- status = "okay";
-};
-
&gpu {
status = "okay";
};
diff --git a/arch/arm/dts/rk3288.dtsi b/arch/arm/dts/rk3288.dtsi
index 6b03a63c..8c394c1e 100644
--- a/arch/arm/dts/rk3288.dtsi
+++ b/arch/arm/dts/rk3288.dtsi
@@ -15,6 +15,7 @@
interrupt-parent = <&gic>;
aliases {
+ ethernet0 = &gmac;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
@@ -35,6 +36,15 @@
spi2 = &spi2;
};
+ arm-pmu {
+ compatible = "arm,cortex-a12-pmu";
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -141,6 +151,26 @@
};
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /*
+ * The rk3288 cannot use the memory area above 0xfe000000
+ * for dma operations for some reason. While there is
+ * probably a better solution available somewhere, we
+ * haven't found it yet and while devices with 2GB of ram
+ * are not affected, this issue prevents 4GB from booting.
+ * So to make these devices at least bootable, block
+ * this area for the time being until the real solution
+ * is found.
+ */
+ dma-unusable at fe000000 {
+ reg = <0xfe000000 0x1000000>;
+ };
+ };
+
xin24m: oscillator {
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -149,14 +179,22 @@
};
timer {
- arm,use-physical-timer;
compatible = "arm,armv7-timer";
+ arm,cpu-registers-not-fw-configured;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
clock-frequency = <24000000>;
- always-on;
+ arm,no-tick-in-suspend;
+ };
+
+ timer: timer at ff810000 {
+ compatible = "rockchip,rk3288-timer";
+ reg = <0x0 0xff810000 0x0 0x20>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_TIMER>, <&xin24m>;
+ clock-names = "pclk", "timer";
};
display-subsystem {
@@ -164,51 +202,59 @@
ports = <&vopl_out>, <&vopb_out>;
};
- sdmmc: dwmmc at ff0c0000 {
+ sdmmc: mmc at ff0c0000 {
compatible = "rockchip,rk3288-dw-mshc";
max-frequency = <150000000>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
- clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0c0000 0x4000>;
+ resets = <&cru SRST_MMC0>;
+ reset-names = "reset";
status = "disabled";
};
- sdio0: dwmmc at ff0d0000 {
+ sdio0: mmc at ff0d0000 {
compatible = "rockchip,rk3288-dw-mshc";
max-frequency = <150000000>;
clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
<&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
- clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0d0000 0x4000>;
+ resets = <&cru SRST_SDIO0>;
+ reset-names = "reset";
status = "disabled";
};
- sdio1: dwmmc at ff0e0000 {
+ sdio1: mmc at ff0e0000 {
compatible = "rockchip,rk3288-dw-mshc";
max-frequency = <150000000>;
clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>,
<&cru SCLK_SDIO1_DRV>, <&cru SCLK_SDIO1_SAMPLE>;
- clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0e0000 0x4000>;
+ resets = <&cru SRST_SDIO1>;
+ reset-names = "reset";
status = "disabled";
};
- emmc: dwmmc at ff0f0000 {
+ emmc: mmc at ff0f0000 {
compatible = "rockchip,rk3288-dw-mshc";
max-frequency = <150000000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
- clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xff0f0000 0x4000>;
+ resets = <&cru SRST_EMMC>;
+ reset-names = "reset";
status = "disabled";
};
@@ -219,6 +265,8 @@
#io-channel-cells = <1>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
+ resets = <&cru SRST_SARADC>;
+ reset-names = "saradc-apb";
status = "disabled";
};
@@ -318,6 +366,7 @@
pinctrl-0 = <&i2c5_xfer>;
status = "disabled";
};
+
uart0: serial at ff180000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
reg = <0xff180000 0x100>;
@@ -326,6 +375,8 @@
reg-io-width = <4>;
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac_peri 1>, <&dmac_peri 2>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
status = "disabled";
@@ -339,6 +390,8 @@
reg-io-width = <4>;
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac_peri 3>, <&dmac_peri 4>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer>;
status = "disabled";
@@ -356,6 +409,7 @@
pinctrl-0 = <&uart2_xfer>;
status = "disabled";
};
+
uart3: serial at ff1b0000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
reg = <0xff1b0000 0x100>;
@@ -364,6 +418,8 @@
reg-io-width = <4>;
clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac_peri 7>, <&dmac_peri 8>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart3_xfer>;
status = "disabled";
@@ -377,6 +433,8 @@
reg-io-width = <4>;
clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac_peri 9>, <&dmac_peri 10>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&uart4_xfer>;
status = "disabled";
@@ -388,7 +446,8 @@
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- broken-no-flushp;
+ arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
clocks = <&cru ACLK_DMAC2>;
clock-names = "apb_pclk";
};
@@ -503,6 +562,8 @@
"mac_clk_rx", "mac_clk_tx",
"clk_mac_ref", "clk_mac_refout",
"aclk_mac", "pclk_mac";
+ resets = <&cru SRST_MAC>;
+ reset-names = "stmmaceth";
};
usb_host0_ehci: usb at ff500000 {
@@ -516,7 +577,7 @@
status = "disabled";
};
- /* NOTE: doesn't work on RK3288, but fixed on RK3288W */
+ /* NOTE: doesn't work on RK3288, but was fixed on RK3288W */
usb_host0_ohci: usb at ff520000 {
compatible = "generic-ohci";
reg = <0x0 0xff520000 0x0 0x100>;
@@ -534,8 +595,10 @@
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_USBHOST1>;
clock-names = "otg";
+ dr_mode = "host";
phys = <&usbphy2>;
phy-names = "usb2-phy";
+ snps,reset-phy-on-wake;
status = "disabled";
};
@@ -547,6 +610,9 @@
clocks = <&cru HCLK_OTG0>;
clock-names = "otg";
dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <275>;
+ g-tx-fifo-size = <256 128 128 64 64 32>;
phys = <&usbphy0>;
phy-names = "usb2-phy";
status = "disabled";
@@ -567,7 +633,8 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- broken-no-flushp;
+ arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
clocks = <&cru ACLK_DMAC1>;
clock-names = "apb_pclk";
status = "disabled";
@@ -647,7 +714,7 @@
status = "disabled";
};
- bus_intmem: bus_intmem at ff700000 {
+ bus_intmem: sram at ff700000 {
compatible = "mmio-sram";
reg = <0xff700000 0x18000>;
#address-cells = <1>;
@@ -659,7 +726,7 @@
};
};
- sram at ff720000 {
+ pmu_sram: sram at ff720000 {
compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
reg = <0xff720000 0x1000>;
};
@@ -701,7 +768,7 @@
compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
reg = <0xff800000 0x100>;
clocks = <&cru PCLK_WDT>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -709,11 +776,11 @@
compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
reg = <0xff8b0000 0x10000>;
#sound-dai-cells = <0>;
- clock-names = "hclk", "mclk";
- clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>;
+ clocks = <&cru SCLK_SPDIF8CH>, <&cru HCLK_SPDIF8CH>;
+ clock-names = "mclk", "hclk";
dmas = <&dmac_bus_s 3>;
dma-names = "tx";
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx>;
rockchip,grf = <&grf>;
@@ -723,50 +790,97 @@
i2s: i2s at ff890000 {
compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
reg = <0xff890000 0x10000>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <1>;
+ #sound-dai-cells = <0>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+ clock-names = "i2s_clk", "i2s_hclk";
dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;
dma-names = "tx", "rx";
- clock-names = "i2s_hclk", "i2s_clk";
- clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <2>;
+ status = "disabled";
+ };
+
+ crypto: crypto at ff8a0000 {
+ compatible = "rockchip,rk3288-crypto";
+ reg = <0xff8a0000 0x4000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
+ <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
+ clock-names = "aclk", "hclk", "sclk", "apb_pclk";
+ resets = <&cru SRST_CRYPTO>;
+ reset-names = "crypto-rst";
+ };
+
+ iep_mmu: iommu at ff900800 {
+ compatible = "rockchip,iommu";
+ reg = <0xff900800 0x40>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
status = "disabled";
};
+ isp_mmu: iommu at ff914000 {
+ compatible = "rockchip,iommu";
+ reg = <0xff914000 0x100>, <0xff915000 0x100>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ rockchip,disable-mmu-reset;
+ status = "disabled";
+ };
+
+ rga: rga at ff920000 {
+ compatible = "rockchip,rk3288-rga";
+ reg = <0xff920000 0x180>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
+ clock-names = "aclk", "hclk", "sclk";
+ power-domains = <&power RK3288_PD_VIO>;
+ resets = <&cru SRST_RGA_CORE>, <&cru SRST_RGA_AXI>, <&cru SRST_RGA_AHB>;
+ reset-names = "core", "axi", "ahb";
+ };
+
vopb: vop at ff930000 {
compatible = "rockchip,rk3288-vop";
reg = <0xff930000 0x19c>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3288_PD_VIO>;
resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopb_mmu>;
- power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
+
vopb_out: port {
#address-cells = <1>;
#size-cells = <0>;
+
vopb_out_edp: endpoint at 0 {
reg = <0>;
remote-endpoint = <&edp_in_vopb>;
};
+
vopb_out_hdmi: endpoint at 1 {
reg = <1>;
remote-endpoint = <&hdmi_in_vopb>;
};
+
vopb_out_lvds: endpoint at 2 {
reg = <2>;
remote-endpoint = <&lvds_in_vopb>;
};
+
vopb_out_mipi: endpoint at 3 {
reg = <3>;
remote-endpoint = <&mipi_in_vopb>;
};
-
};
};
@@ -774,7 +888,8 @@
compatible = "rockchip,iommu";
reg = <0xff930300 0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vopb_mmu";
+ clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+ clock-names = "aclk", "iface";
power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
@@ -786,31 +901,35 @@
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3288_PD_VIO>;
resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopl_mmu>;
- power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
+
vopl_out: port {
#address-cells = <1>;
#size-cells = <0>;
+
vopl_out_edp: endpoint at 0 {
reg = <0>;
remote-endpoint = <&edp_in_vopl>;
};
+
vopl_out_hdmi: endpoint at 1 {
reg = <1>;
remote-endpoint = <&hdmi_in_vopl>;
};
+
vopl_out_lvds: endpoint at 2 {
reg = <2>;
remote-endpoint = <&lvds_in_vopl>;
};
+
vopl_out_mipi: endpoint at 3 {
reg = <3>;
remote-endpoint = <&mipi_in_vopl>;
};
-
};
};
@@ -818,7 +937,8 @@
compatible = "rockchip,iommu";
reg = <0xff940300 0x100>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vopl_mmu";
+ clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+ clock-names = "aclk", "iface";
power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
@@ -827,16 +947,14 @@
mipi_dsi: mipi at ff960000 {
compatible = "rockchip,rk3288_mipi_dsi";
reg = <0xff960000 0x4000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_MIPI_DSI0>;
clock-names = "pclk_mipi";
- /*pinctrl-names = "default";
- pinctrl-0 = <&lcdc0_ctl>;*/
+ power-domains = <&power RK3288_PD_VIO>;
rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
+
ports {
- reg = <1>;
mipi_in: port {
#address-cells = <1>;
#size-cells = <0>;
@@ -858,16 +976,21 @@
clocks = <&cru PCLK_LVDS_PHY>;
clock-names = "pclk_lvds";
pinctrl-names = "default";
- pinctrl-0 = <&lcdc0_ctl>;
+ pinctrl-0 = <&lcdc_ctl>;
+ power-domains = <&power RK3288_PD_VIO>;
rockchip,grf = <&grf>;
status = "disabled";
+
ports {
#address-cells = <1>;
#size-cells = <0>;
+
lvds_in: port at 0 {
reg = <0>;
+
#address-cells = <1>;
#size-cells = <0>;
+
lvds_in_vopb: endpoint at 0 {
reg = <0>;
remote-endpoint = <&vopb_out_lvds>;
@@ -885,12 +1008,13 @@
reg = <0xff970000 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru PCLK_EDP_CTRL>;
- rockchip,grf = <&grf>;
clock-names = "clk_edp", "clk_edp_24m", "pclk_edp";
- resets = <&cru 111>;
+ resets = <&cru SRST_EDP>;
reset-names = "edp";
+ rockchip,grf = <&grf>;
power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
+
ports {
edp_in: port {
#address-cells = <1>;
@@ -911,12 +1035,14 @@
compatible = "rockchip,rk3288-dw-hdmi";
reg = <0xff980000 0x20000>;
reg-io-width = <4>;
- ddc-i2c-bus = <&i2c5>;
+ #sound-dai-cells = <0>;
rockchip,grf = <&grf>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
clock-names = "iahb", "isfr";
+ power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
+
ports {
hdmi_in: port {
#address-cells = <1>;
@@ -933,31 +1059,36 @@
};
};
- hdmi_audio: hdmi_audio {
- compatible = "rockchip,rk3288-hdmi-audio";
- i2s-controller = <&i2s>;
- status = "disable";
- };
-
vpu: video-codec at ff9a0000 {
compatible = "rockchip,rk3288-vpu";
reg = <0xff9a0000 0x800>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vepu", "vdpu";
clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
- clock-names = "aclk_vcodec", "hclk_vcodec";
- power-domains = <&power RK3288_PD_VIDEO>;
+ clock-names = "aclk", "hclk";
iommus = <&vpu_mmu>;
+ power-domains = <&power RK3288_PD_VIDEO>;
};
vpu_mmu: iommu at ff9a0800 {
compatible = "rockchip,iommu";
reg = <0xff9a0800 0x100>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vpu_mmu";
+ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
power-domains = <&power RK3288_PD_VIDEO>;
+ };
+
+ hevc_mmu: iommu at ff9c0440 {
+ compatible = "rockchip,iommu";
+ reg = <0xff9c0440 0x40>, <0xff9c0480 0x40>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_HEVC>, <&cru HCLK_HEVC>;
+ clock-names = "aclk", "iface";
#iommu-cells = <0>;
+ status = "disabled";
};
gpu: gpu at ffa30000 {
@@ -999,13 +1130,84 @@
};
};
+ qos_gpu_r: qos at ffaa0000 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffaa0000 0x20>;
+ };
+
+ qos_gpu_w: qos at ffaa0080 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffaa0080 0x20>;
+ };
+
+ qos_vio1_vop: qos at ffad0000 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffad0000 0x20>;
+ };
+
+ qos_vio1_isp_w0: qos at ffad0100 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffad0100 0x20>;
+ };
+
+ qos_vio1_isp_w1: qos at ffad0180 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0x0 0xffad0180 0x0 0x20>;
+ };
+
+ qos_vio0_vop: qos at ffad0400 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0x0 0xffad0400 0x0 0x20>;
+ };
+
+ qos_vio0_vip: qos at ffad0480 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffad0480 0x20>;
+ };
+
+ qos_vio0_iep: qos at ffad0500 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffad0500 0x20>;
+ };
+
+ qos_vio2_rga_r: qos at ffad0800 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffad0800 0x20>;
+ };
+
+ qos_vio2_rga_w: qos at ffad0880 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffad0880 0x20>;
+ };
+
+ qos_vio1_isp_r: qos at ffad0900 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffad0900 0x20>;
+ };
+
+ qos_video: qos at ffae0000 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffae0000 0x20>;
+ };
+
+ qos_hevc_r: qos at ffaf0000 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffaf0000 0x20>;
+ };
+
+ qos_hevc_w: qos at ffaf0080 {
+ compatible = "rockchip,rk3288-qos", "syscon";
+ reg = <0xffaf0080 0x20>;
+ };
+
dmac_bus_s: dma-controller at ffb20000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xffb20000 0x4000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- broken-no-flushp;
+ arm,pl330-broken-no-flushp;
+ arm,pl330-periph-burst;
clocks = <&cru ACLK_DMAC1>;
clock-names = "apb_pclk";
};
@@ -1013,7 +1215,17 @@
efuse: efuse at ffb40000 {
compatible = "rockchip,rk3288-efuse";
reg = <0xffb40000 0x10000>;
- status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cru PCLK_EFUSE256>;
+ clock-names = "pclk_efuse";
+
+ cpu_id: cpu-id at 7 {
+ reg = <0x07 0x10>;
+ };
+ cpu_leakage: cpu_leakage at 17 {
+ reg = <0x17 0x1>;
+ };
};
gic: interrupt-controller at ffc01000 {
@@ -1072,7 +1284,7 @@
gpio0: gpio0 at ff750000 {
compatible = "rockchip,gpio-bank";
- reg = <0xff750000 0x100>;
+ reg = <0xff750000 0x100>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO0>;
@@ -1191,6 +1403,24 @@
hdmi_cec_c0: hdmi-cec-c0 {
rockchip,pins = <7 RK_PC0 2 &pcfg_pull_none>;
};
+
+ hdmi_cec_c7: hdmi-cec-c7 {
+ rockchip,pins = <7 RK_PC7 4 &pcfg_pull_none>;
+ };
+
+ hdmi_ddc: hdmi-ddc {
+ rockchip,pins = <7 RK_PC3 2 &pcfg_pull_none>,
+ <7 RK_PC4 2 &pcfg_pull_none>;
+ };
+
+ hdmi_ddc_unwedge: hdmi-ddc-unwedge {
+ rockchip,pins = <7 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>,
+ <7 RK_PC4 2 &pcfg_pull_none>;
+ };
+ };
+
+ pcfg_output_low: pcfg-output-low {
+ output-low;
};
pcfg_pull_up: pcfg-pull-up {
@@ -1210,7 +1440,7 @@
drive-strength = <12>;
};
- sleep {
+ suspend {
global_pwroff: global-pwroff {
rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>;
};
@@ -1228,6 +1458,12 @@
};
};
+ edp {
+ edp_hpd: edp-hpd {
+ rockchip,pins = <7 RK_PB3 2 &pcfg_pull_down>;
+ };
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>,
@@ -1281,8 +1517,8 @@
};
};
- lcdc0 {
- lcdc0_ctl: lcdc0-ctl {
+ lcdc {
+ lcdc_ctl: lcdc-ctl {
rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>,
<1 RK_PD1 1 &pcfg_pull_none>,
<1 RK_PD2 1 &pcfg_pull_none>,
@@ -1299,7 +1535,7 @@
rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up>;
};
- sdmmc_cd: sdmcc-cd {
+ sdmmc_cd: sdmmc-cd {
rockchip,pins = <6 RK_PC6 1 &pcfg_pull_up>;
};
@@ -1490,7 +1726,7 @@
};
uart0_cts: uart0-cts {
- rockchip,pins = <4 RK_PC2 1 &pcfg_pull_none>;
+ rockchip,pins = <4 RK_PC2 1 &pcfg_pull_up>;
};
uart0_rts: uart0-rts {
@@ -1505,7 +1741,7 @@
};
uart1_cts: uart1-cts {
- rockchip,pins = <5 RK_PB2 1 &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PB2 1 &pcfg_pull_up>;
};
uart1_rts: uart1-rts {
@@ -1528,7 +1764,7 @@
};
uart3_cts: uart3-cts {
- rockchip,pins = <7 RK_PB1 1 &pcfg_pull_none>;
+ rockchip,pins = <7 RK_PB1 1 &pcfg_pull_up>;
};
uart3_rts: uart3-rts {
@@ -1538,20 +1774,24 @@
uart4 {
uart4_xfer: uart4-xfer {
- rockchip,pins = <5 RK_PB4 3 &pcfg_pull_up>,
- <5 RK_PB5 3 &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PB7 3 &pcfg_pull_up>,
+ <5 RK_PB6 3 &pcfg_pull_none>;
};
uart4_cts: uart4-cts {
- rockchip,pins = <5 RK_PB6 3 &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PB4 3 &pcfg_pull_up>;
};
uart4_rts: uart4-rts {
- rockchip,pins = <5 RK_PB7 3 &pcfg_pull_none>;
+ rockchip,pins = <5 RK_PB5 3 &pcfg_pull_none>;
};
};
tsadc {
+ otp_pin: otp-pin {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
otp_out: otp-out {
rockchip,pins = <0 RK_PB2 1 &pcfg_pull_none>;
};
--
2.20.1
More information about the U-Boot
mailing list