[PATCH v2 1/9] board: starqltechn: Align DT node overrides with sdm845.dtsi

[Ramon Fried]

On Fri, Jul 8, 2022 at 4:14 PM Sumit Garg <sumit.garg at linaro.org> wrote:
>
> Currently there is a mismatch among DT node overrides in starqltechn
> board DTS file and the actual DT nodes in the sdm845.dtsi. So fix that
> to align with DT nodes in sdm845.dtsi.
>
> Signed-off-by: Sumit Garg <sumit.garg at linaro.org>
> ---
>  arch/arm/dts/starqltechn-uboot.dtsi | 18 ++++++++----------
>  arch/arm/dts/starqltechn.dts        |  2 +-
>  2 files changed, 9 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/dts/starqltechn-uboot.dtsi b/arch/arm/dts/starqltechn-uboot.dtsi
> index b55cccfe14..8d5d09c3a5 100644
> --- a/arch/arm/dts/starqltechn-uboot.dtsi
> +++ b/arch/arm/dts/starqltechn-uboot.dtsi
> @@ -16,16 +16,14 @@
>                 serial at a84000 {
>                         u-boot,dm-pre-reloc;
>                 };
> -               gcc {
> -                       clock-controller at 100000 {
> -                               u-boot,dm-pre-reloc;
> -                       };
> -                       gpio_north at 3900000 {
> -                               u-boot,dm-pre-reloc;
> -                       };
> -                       pinctrl at 3900000 {
> -                               u-boot,dm-pre-reloc;
> -                       };
> +               clock-controller at 100000 {
> +                       u-boot,dm-pre-reloc;
> +               };
> +               gpio_north at 3900000 {
> +                       u-boot,dm-pre-reloc;
> +               };
> +               pinctrl_north at 3900000 {
> +                       u-boot,dm-pre-reloc;
>                 };
>         };
>  };
> diff --git a/arch/arm/dts/starqltechn.dts b/arch/arm/dts/starqltechn.dts
> index 0261388319..34a4f59cbd 100644
> --- a/arch/arm/dts/starqltechn.dts
> +++ b/arch/arm/dts/starqltechn.dts
> @@ -48,7 +48,7 @@
>                         status = "okay";
>                 };
>
> -               pinctrl at 3900000 {
> +               pinctrl_north at 3900000 {
>                         muic_i2c: muic_i2c {
>                                 pins = "GPIO_33", "GPIO_34";
>                                 drive-strength = <0x2>;
> --
> 2.25.1
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>