[PATCH 00/14] imx: kontron-sl-mx8mm: Improvements and OSM board support

[Stefano Babic]

Hi Frieder,

On 13.07.22 11:52, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf at kontron.de>
> 

Series raises a warning and I cannot merge it. Can you fix it and repost 
? Thanks !


https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/471281

Best regards,
Stefano

> This set contains several improvements for the kontron-sl-mx8mm board
> configuration (patches 1 to 13) and support for a new SoM (patch 14,
> including baseboard) that complies to the Open Standard Module (OSM) 1.0
> hardware specification, size S (https://sget.org/standards/osm).
> 
> Frieder Schrempf (14):
>    imx: kontron-sl-mx8mm: Remove LVDS board type and devicetrees
>    imx: kontron-sl-mx8mm: Add redundant environment
>    imx: kontron-sl-mx8mm: Enable environment in MMC
>    imx: kontron-sl-mx8mm: Migrate to use CONFIG_EXTRA_ENV_TEXT
>    imx: kontron-sl-mx8mm: Enable bootaux command
>    imx: kontron-sl-mx8mm: lpddr4_timing.c: Add spaces for proper
>      alignment
>    imx: kontron-sl-mx8mm: Remove 100mt DDR setpoint
>    imx: kontron-sl-mx8mm: Use new LPDDR4 config parameters
>    imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types
>    imx: kontron-sl-mx8mm: Adjust board and SoM model strings
>    imx: kontron-sl-mx8mm: Use the VSELECT signal to switch SD card IO
>      voltage
>    imx: kontron-sl-mx8mm: Use voltage rail names from schematic for PMIC
>      regulator-names
>    imx: kontron-sl-mx8mm: Simplify code in spl.c
>    imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL
>      i.MX8MM OSM-S
> 
>   arch/arm/dts/Makefile                         |    1 -
>   .../imx8mm-kontron-n801x-s-lvds-u-boot.dtsi   |    6 -
>   arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts  |  116 -
>   .../dts/imx8mm-kontron-n801x-s-u-boot.dtsi    |    7 +-
>   arch/arm/dts/imx8mm-kontron-n801x-s.dts       |    5 +-
>   arch/arm/dts/imx8mm-kontron-n801x-som.dtsi    |   30 +-
>   .../dts/imx8mm-kontron-n802x-s-u-boot.dtsi    |    6 +
>   arch/arm/dts/imx8mm-kontron-n802x-s.dts       |  376 ++++
>   arch/arm/dts/imx8mm-kontron-n802x-som.dtsi    |  309 +++
>   ...tsi => imx8mm-kontron-n80xx-s-u-boot.dtsi} |    8 +-
>   board/kontron/sl-mx8mm/MAINTAINERS            |    1 +
>   board/kontron/sl-mx8mm/lpddr4_timing.c        | 1969 ++++++++---------
>   board/kontron/sl-mx8mm/sl-mx8mm.c             |   41 +
>   board/kontron/sl-mx8mm/sl-mx8mm.env           |    7 +
>   board/kontron/sl-mx8mm/spl.c                  |   85 +-
>   configs/kontron-sl-mx8mm_defconfig            |   10 +-
>   doc/board/kontron/sl-mx8mm.rst                |    7 +-
>   include/configs/kontron-sl-mx8mm.h            |   16 +-
>   18 files changed, 1717 insertions(+), 1283 deletions(-)
>   delete mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
>   delete mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts
>   create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-s-u-boot.dtsi
>   create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-s.dts
>   create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-som.dtsi
>   rename arch/arm/dts/{imx8mm-kontron-n801x-u-boot.dtsi => imx8mm-kontron-n80xx-s-u-boot.dtsi} (88%)
>   create mode 100644 board/kontron/sl-mx8mm/sl-mx8mm.env
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================