kontron_pitx_imx8m does not start

[Heiko Thiery]

Hi Marek

Am Fr., 15. Juli 2022 um 11:29 Uhr schrieb Marek Vasut <marex at denx.de>:
>
> On 7/15/22 10:33, Heiko Thiery wrote:
> > Hi,
>
> Hi,
>
> > I see since the change to CLK_IMX8MQ that the kontron_pitx_imx8m board
> > does not start anymore. I have enabled the DUBUG_UART and see the
> > following outputs
>
> Pick
> [PATCH] board_init: Do not reserve MALLOC_F area on stack if non-zero
> MALLOC_F_ADDR

this does not solve the issue.
>
> And also, increate SPL_MALLOC_F_LEN in board config if that itself does
> not help.

As said, I need to increase SYS_MALLOC_F_LEN to 0xc000. Then the board
starts. But Peng said that this is not a valid value due to the
OCRAM_S is limited to 32k and this is the MALLOC base.
On the other hand, why does my board consums that much memory and the
others not. I cannot find any difference in these boards that explains
this to me.

-- 
Heiko