[PATCH 6/9] configs: at91: sam9x60ek: Enable DM based nand driver
Balamanikandan Gunasundar
balamanikandan.gunasundar at microchip.com
Tue Jul 19 12:46:20 CEST 2022
Enable Device model supported NAND driver and remove legacy Atmel NAND
driver
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar at microchip.com>
---
configs/sam9x60ek_mmc_defconfig | 9 ++++++---
configs/sam9x60ek_nandflash_defconfig | 9 ++++++---
configs/sam9x60ek_qspiflash_defconfig | 8 +++++---
3 files changed, 17 insertions(+), 9 deletions(-)
diff --git a/configs/sam9x60ek_mmc_defconfig b/configs/sam9x60ek_mmc_defconfig
index c50aa6b5c5..d989681eb6 100644
--- a/configs/sam9x60ek_mmc_defconfig
+++ b/configs/sam9x60ek_mmc_defconfig
@@ -53,6 +53,8 @@ CONFIG_ENV_IS_IN_FAT=y
CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
CONFIG_CLK=y
CONFIG_CLK_CCF=y
CONFIG_CLK_AT91=y
@@ -62,15 +64,16 @@ CONFIG_CPU=y
CONFIG_AT91_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_AT91=y
+CONFIG_ATMEL_EBI=y
+CONFIG_MFD_ATMEL_SMC=y
CONFIG_I2C_EEPROM=y
CONFIG_MICROCHIP_FLEXCOM=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ATMEL=y
CONFIG_MTD=y
+CONFIG_DM_MTD=y
CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_ATMEL=y
-CONFIG_ATMEL_NAND_HW_PMECC=y
-CONFIG_PMECC_CAP=8
+CONFIG_DM_NAND_ATMEL=y
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=50000000
diff --git a/configs/sam9x60ek_nandflash_defconfig b/configs/sam9x60ek_nandflash_defconfig
index d8d2383fed..6bc78a73e2 100644
--- a/configs/sam9x60ek_nandflash_defconfig
+++ b/configs/sam9x60ek_nandflash_defconfig
@@ -55,6 +55,8 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
CONFIG_CLK=y
CONFIG_CLK_CCF=y
CONFIG_CLK_AT91=y
@@ -64,14 +66,15 @@ CONFIG_CPU=y
CONFIG_AT91_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_AT91=y
+CONFIG_ATMEL_EBI=y
+CONFIG_MFD_ATMEL_SMC=y
CONFIG_I2C_EEPROM=y
CONFIG_MICROCHIP_FLEXCOM=y
CONFIG_GENERIC_ATMEL_MCI=y
CONFIG_MTD=y
+CONFIG_DM_MTD=y
# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
-CONFIG_NAND_ATMEL=y
-CONFIG_ATMEL_NAND_HW_PMECC=y
-CONFIG_PMECC_CAP=8
+CONFIG_DM_NAND_ATMEL=y
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=50000000
diff --git a/configs/sam9x60ek_qspiflash_defconfig b/configs/sam9x60ek_qspiflash_defconfig
index fc4108cdc4..b466fc942f 100644
--- a/configs/sam9x60ek_qspiflash_defconfig
+++ b/configs/sam9x60ek_qspiflash_defconfig
@@ -71,9 +71,6 @@ CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_MTD_RAW_NAND=y
# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
-CONFIG_NAND_ATMEL=y
-CONFIG_ATMEL_NAND_HW_PMECC=y
-CONFIG_PMECC_CAP=8
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
@@ -101,3 +98,8 @@ CONFIG_W1_GPIO=y
CONFIG_W1_EEPROM=y
CONFIG_W1_EEPROM_DS24XXX=y
CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_ATMEL_EBI=y
+CONFIG_MFD_ATMEL_SMC=y
+CONFIG_DM_NAND_ATMEL=y
--
2.25.1
More information about the U-Boot
mailing list