[PATCH 5/9] mfd: syscon: atmel-smc: Add driver for atmel SMC
Balamanikandan Gunasundar
balamanikandan.gunasundar at microchip.com
Tue Jul 19 12:46:19 CEST 2022
Add driver for atmel Static Memory Controller. Add helper functions to
configure SMC. This file is inherited from the work done by Boris
Brezillon for Linux
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar at microchip.com>
---
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/mfd/Kconfig | 4 +
drivers/mfd/Makefile | 1 +
drivers/mfd/atmel-smc.c | 364 +++++++++++++++++++++++++++
include/linux/mfd/syscon/atmel-smc.h | 119 +++++++++
6 files changed, 491 insertions(+)
create mode 100644 drivers/mfd/Kconfig
create mode 100644 drivers/mfd/Makefile
create mode 100644 drivers/mfd/atmel-smc.c
create mode 100644 include/linux/mfd/syscon/atmel-smc.h
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 8b6fead351..ffc06ed65e 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -60,6 +60,8 @@ source "drivers/mailbox/Kconfig"
source "drivers/memory/Kconfig"
+source "drivers/mfd/Kconfig"
+
source "drivers/misc/Kconfig"
source "drivers/mmc/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index d63fd1c04d..2c62b8eb5d 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -100,6 +100,7 @@ obj-$(CONFIG_QE) += qe/
obj-$(CONFIG_U_QE) += qe/
obj-y += mailbox/
obj-y += memory/
+obj-y += mfd/
obj-y += mtd/
obj-y += pwm/
obj-y += reset/
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
new file mode 100644
index 0000000000..ae53b02f27
--- /dev/null
+++ b/drivers/mfd/Kconfig
@@ -0,0 +1,4 @@
+config MFD_ATMEL_SMC
+ bool "Atmel Static Memory Controller driver"
+ help
+ Say yes here to support Atmel Static Memory Controller driver.
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
new file mode 100644
index 0000000000..4454815a98
--- /dev/null
+++ b/drivers/mfd/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MFD_ATMEL_SMC) += atmel-smc.o
diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c
new file mode 100644
index 0000000000..15296f71a1
--- /dev/null
+++ b/drivers/mfd/atmel-smc.c
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Atmel SMC (Static Memory Controller) helper functions.
+ *
+ * Copyright (C) 2022 Microchip Technology Inc.
+ * Copyright (C) 2017 Free Electrons
+ *
+ * Author: Boris Brezillon <boris.brezillon at free-electrons.com>
+ */
+
+#include <clk.h>
+#include <dm/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/mfd/syscon/atmel-smc.h>
+#include <linux/string.h>
+
+/**
+ * atmel_smc_cs_conf_init - initialize a SMC CS conf
+ * @conf: the SMC CS conf to initialize
+ *
+ * Set all fields to 0 so that one can start defining a new config.
+ */
+void atmel_smc_cs_conf_init(struct atmel_smc_cs_conf *conf)
+{
+ memset(conf, 0, sizeof(*conf));
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_init);
+
+/**
+ * atmel_smc_cs_encode_ncycles - encode a number of MCK clk cycles in the
+ * format expected by the SMC engine
+ * @ncycles: number of MCK clk cycles
+ * @msbpos: position of the MSB part of the timing field
+ * @msbwidth: width of the MSB part of the timing field
+ * @msbfactor: factor applied to the MSB
+ * @encodedval: param used to store the encoding result
+ *
+ * This function encodes the @ncycles value as described in the datasheet
+ * (section "SMC Setup/Pulse/Cycle/Timings Register"). This is a generic
+ * helper which called with different parameter depending on the encoding
+ * scheme.
+ *
+ * If the @ncycles value is too big to be encoded, -ERANGE is returned and
+ * the encodedval is contains the maximum val. Otherwise, 0 is returned.
+ */
+static int atmel_smc_cs_encode_ncycles(unsigned int ncycles,
+ unsigned int msbpos,
+ unsigned int msbwidth,
+ unsigned int msbfactor,
+ unsigned int *encodedval)
+{
+ unsigned int lsbmask = GENMASK(msbpos - 1, 0);
+ unsigned int msbmask = GENMASK(msbwidth - 1, 0);
+ unsigned int msb, lsb;
+ int ret = 0;
+
+ msb = ncycles / msbfactor;
+ lsb = ncycles % msbfactor;
+
+ if (lsb > lsbmask) {
+ lsb = 0;
+ msb++;
+ }
+
+ /*
+ * Let's just put the maximum we can if the requested setting does
+ * not fit in the register field.
+ * We still return -ERANGE in case the caller cares.
+ */
+ if (msb > msbmask) {
+ msb = msbmask;
+ lsb = lsbmask;
+ ret = -ERANGE;
+ }
+
+ *encodedval = (msb << msbpos) | lsb;
+
+ return ret;
+}
+
+/**
+ * atmel_smc_cs_conf_set_timing - set the SMC CS conf Txx parameter to a
+ * specific value
+ * @conf: SMC CS conf descriptor
+ * @shift: the position of the Txx field in the TIMINGS register
+ * @ncycles: value (expressed in MCK clk cycles) to assign to this Txx
+ * parameter
+ *
+ * This function encodes the @ncycles value as described in the datasheet
+ * (section "SMC Timings Register"), and then stores the result in the
+ * @conf->timings field at @shift position.
+ *
+ * Returns -EINVAL if shift is invalid, -ERANGE if ncycles does not fit in
+ * the field, and 0 otherwise.
+ */
+int atmel_smc_cs_conf_set_timing(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles)
+{
+ unsigned int val;
+ int ret;
+
+ if (shift != ATMEL_HSMC_TIMINGS_TCLR_SHIFT &&
+ shift != ATMEL_HSMC_TIMINGS_TADL_SHIFT &&
+ shift != ATMEL_HSMC_TIMINGS_TAR_SHIFT &&
+ shift != ATMEL_HSMC_TIMINGS_TRR_SHIFT &&
+ shift != ATMEL_HSMC_TIMINGS_TWB_SHIFT)
+ return -EINVAL;
+
+ /*
+ * The formula described in atmel datasheets (section "HSMC Timings
+ * Register"):
+ *
+ * ncycles = (Txx[3] * 64) + Txx[2:0]
+ */
+ ret = atmel_smc_cs_encode_ncycles(ncycles, 3, 1, 64, &val);
+ conf->timings &= ~GENMASK(shift + 3, shift);
+ conf->timings |= val << shift;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_timing);
+
+/**
+ * atmel_smc_cs_conf_set_setup - set the SMC CS conf xx_SETUP parameter to a
+ * specific value
+ * @conf: SMC CS conf descriptor
+ * @shift: the position of the xx_SETUP field in the SETUP register
+ * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_SETUP
+ * parameter
+ *
+ * This function encodes the @ncycles value as described in the datasheet
+ * (section "SMC Setup Register"), and then stores the result in the
+ * @conf->setup field at @shift position.
+ *
+ * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
+ * the field, and 0 otherwise.
+ */
+int atmel_smc_cs_conf_set_setup(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles)
+{
+ unsigned int val;
+ int ret;
+
+ if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT &&
+ shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT)
+ return -EINVAL;
+
+ /*
+ * The formula described in atmel datasheets (section "SMC Setup
+ * Register"):
+ *
+ * ncycles = (128 * xx_SETUP[5]) + xx_SETUP[4:0]
+ */
+ ret = atmel_smc_cs_encode_ncycles(ncycles, 5, 1, 128, &val);
+ conf->setup &= ~GENMASK(shift + 7, shift);
+ conf->setup |= val << shift;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_setup);
+
+/**
+ * atmel_smc_cs_conf_set_pulse - set the SMC CS conf xx_PULSE parameter to a
+ * specific value
+ * @conf: SMC CS conf descriptor
+ * @shift: the position of the xx_PULSE field in the PULSE register
+ * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_PULSE
+ * parameter
+ *
+ * This function encodes the @ncycles value as described in the datasheet
+ * (section "SMC Pulse Register"), and then stores the result in the
+ * @conf->setup field at @shift position.
+ *
+ * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
+ * the field, and 0 otherwise.
+ */
+int atmel_smc_cs_conf_set_pulse(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles)
+{
+ unsigned int val;
+ int ret;
+
+ if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT &&
+ shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT)
+ return -EINVAL;
+
+ /*
+ * The formula described in atmel datasheets (section "SMC Pulse
+ * Register"):
+ *
+ * ncycles = (256 * xx_PULSE[6]) + xx_PULSE[5:0]
+ */
+ ret = atmel_smc_cs_encode_ncycles(ncycles, 6, 1, 256, &val);
+ conf->pulse &= ~GENMASK(shift + 7, shift);
+ conf->pulse |= val << shift;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_pulse);
+
+/**
+ * atmel_smc_cs_conf_set_cycle - set the SMC CS conf xx_CYCLE parameter to a
+ * specific value
+ * @conf: SMC CS conf descriptor
+ * @shift: the position of the xx_CYCLE field in the CYCLE register
+ * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_CYCLE
+ * parameter
+ *
+ * This function encodes the @ncycles value as described in the datasheet
+ * (section "SMC Cycle Register"), and then stores the result in the
+ * @conf->setup field at @shift position.
+ *
+ * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
+ * the field, and 0 otherwise.
+ */
+int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles)
+{
+ unsigned int val;
+ int ret;
+
+ if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NRD_SHIFT)
+ return -EINVAL;
+
+ /*
+ * The formula described in atmel datasheets (section "SMC Cycle
+ * Register"):
+ *
+ * ncycles = (xx_CYCLE[8:7] * 256) + xx_CYCLE[6:0]
+ */
+ ret = atmel_smc_cs_encode_ncycles(ncycles, 7, 2, 256, &val);
+ conf->cycle &= ~GENMASK(shift + 15, shift);
+ conf->cycle |= val << shift;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_cycle);
+
+/**
+ * atmel_smc_cs_conf_apply - apply an SMC CS conf
+ * @regmap: the SMC regmap
+ * @cs: the CS id
+ * @conf: the SMC CS conf to apply
+ *
+ * Applies an SMC CS configuration.
+ * Only valid on at91sam9/avr32 SoCs.
+ */
+void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs,
+ const struct atmel_smc_cs_conf *conf)
+{
+ regmap_write(regmap, ATMEL_SMC_SETUP(cs), conf->setup);
+ regmap_write(regmap, ATMEL_SMC_PULSE(cs), conf->pulse);
+ regmap_write(regmap, ATMEL_SMC_CYCLE(cs), conf->cycle);
+ regmap_write(regmap, ATMEL_SMC_MODE(cs), conf->mode);
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply);
+
+/**
+ * atmel_hsmc_cs_conf_apply - apply an SMC CS conf
+ * @regmap: the HSMC regmap
+ * @cs: the CS id
+ * @layout: the layout of registers
+ * @conf: the SMC CS conf to apply
+ *
+ * Applies an SMC CS configuration.
+ * Only valid on post-sama5 SoCs.
+ */
+void atmel_hsmc_cs_conf_apply(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *layout,
+ int cs, const struct atmel_smc_cs_conf *conf)
+{
+ regmap_write(regmap, ATMEL_HSMC_SETUP(layout, cs), conf->setup);
+ regmap_write(regmap, ATMEL_HSMC_PULSE(layout, cs), conf->pulse);
+ regmap_write(regmap, ATMEL_HSMC_CYCLE(layout, cs), conf->cycle);
+ regmap_write(regmap, ATMEL_HSMC_TIMINGS(layout, cs), conf->timings);
+ regmap_write(regmap, ATMEL_HSMC_MODE(layout, cs), conf->mode);
+}
+EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_apply);
+
+/**
+ * atmel_smc_cs_conf_get - retrieve the current SMC CS conf
+ * @regmap: the SMC regmap
+ * @cs: the CS id
+ * @conf: the SMC CS conf object to store the current conf
+ *
+ * Retrieve the SMC CS configuration.
+ * Only valid on at91sam9/avr32 SoCs.
+ */
+void atmel_smc_cs_conf_get(struct regmap *regmap, int cs,
+ struct atmel_smc_cs_conf *conf)
+{
+ regmap_read(regmap, ATMEL_SMC_SETUP(cs), &conf->setup);
+ regmap_read(regmap, ATMEL_SMC_PULSE(cs), &conf->pulse);
+ regmap_read(regmap, ATMEL_SMC_CYCLE(cs), &conf->cycle);
+ regmap_read(regmap, ATMEL_SMC_MODE(cs), &conf->mode);
+}
+EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_get);
+
+/**
+ * atmel_hsmc_cs_conf_get - retrieve the current SMC CS conf
+ * @regmap: the HSMC regmap
+ * @cs: the CS id
+ * @layout: the layout of registers
+ * @conf: the SMC CS conf object to store the current conf
+ *
+ * Retrieve the SMC CS configuration.
+ * Only valid on post-sama5 SoCs.
+ */
+void atmel_hsmc_cs_conf_get(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *layout,
+ int cs, struct atmel_smc_cs_conf *conf)
+{
+ regmap_read(regmap, ATMEL_HSMC_SETUP(layout, cs), &conf->setup);
+ regmap_read(regmap, ATMEL_HSMC_PULSE(layout, cs), &conf->pulse);
+ regmap_read(regmap, ATMEL_HSMC_CYCLE(layout, cs), &conf->cycle);
+ regmap_read(regmap, ATMEL_HSMC_TIMINGS(layout, cs), &conf->timings);
+ regmap_read(regmap, ATMEL_HSMC_MODE(layout, cs), &conf->mode);
+}
+EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_get);
+
+static const struct atmel_hsmc_reg_layout sama5d3_reg_layout = {
+ .timing_regs_offset = 0x600,
+};
+
+static const struct atmel_hsmc_reg_layout sama5d2_reg_layout = {
+ .timing_regs_offset = 0x700,
+};
+
+static const struct udevice_id atmel_smc_ids[] = {
+ { .compatible = "atmel,at91sam9260-smc", .data = (ulong)0 },
+ { .compatible = "atmel,sama5d3-smc", .data = (ulong)&sama5d3_reg_layout },
+ { .compatible = "atmel,sama5d2-smc", .data = (ulong)&sama5d2_reg_layout },
+ { /* sentinel */ },
+};
+
+/**
+ * atmel_hsmc_get_reg_layout - retrieve the layout of HSMC registers
+ * @np: the HSMC regmap
+ *
+ * Retrieve the layout of HSMC registers.
+ *
+ * Returns NULL in case of SMC, a struct atmel_hsmc_reg_layout pointer
+ * in HSMC case, otherwise ERR_PTR(-EINVAL).
+ */
+const struct atmel_hsmc_reg_layout *
+atmel_hsmc_get_reg_layout(ofnode np)
+{
+ int i;
+ const struct udevice_id *match;
+ const char *name;
+ int len;
+
+ name = ofnode_get_property(np, "compatible", &len);
+
+ for (i = 0; i < ARRAY_SIZE(atmel_smc_ids); i++) {
+ if (!strcmp(name, atmel_smc_ids[i].compatible)) {
+ match = &atmel_smc_ids[i];
+ break;
+ }
+ }
+
+ return match ? (struct atmel_hsmc_reg_layout *)match->data : ERR_PTR(-EINVAL);
+}
diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h
new file mode 100644
index 0000000000..74be5a199f
--- /dev/null
+++ b/include/linux/mfd/syscon/atmel-smc.h
@@ -0,0 +1,119 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Atmel SMC (Static Memory Controller) register offsets and bit definitions.
+ *
+ * Copyright (C) 2014 Atmel
+ * Copyright (C) 2014 Free Electrons
+ *
+ * Author: Boris Brezillon <boris.brezillon at free-electrons.com>
+ */
+
+#ifndef _LINUX_MFD_SYSCON_ATMEL_SMC_H_
+#define _LINUX_MFD_SYSCON_ATMEL_SMC_H_
+
+#include <linux/kernel.h>
+#include <dm/ofnode.h>
+#include <regmap.h>
+
+#define ATMEL_SMC_SETUP(cs) (((cs) * 0x10))
+#define ATMEL_HSMC_SETUP(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14))
+#define ATMEL_SMC_PULSE(cs) (((cs) * 0x10) + 0x4)
+#define ATMEL_HSMC_PULSE(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x4)
+#define ATMEL_SMC_CYCLE(cs) (((cs) * 0x10) + 0x8)
+#define ATMEL_HSMC_CYCLE(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x8)
+#define ATMEL_SMC_NWE_SHIFT 0
+#define ATMEL_SMC_NCS_WR_SHIFT 8
+#define ATMEL_SMC_NRD_SHIFT 16
+#define ATMEL_SMC_NCS_RD_SHIFT 24
+
+#define ATMEL_SMC_MODE(cs) (((cs) * 0x10) + 0xc)
+#define ATMEL_HSMC_MODE(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x10)
+#define ATMEL_SMC_MODE_READMODE_MASK BIT(0)
+#define ATMEL_SMC_MODE_READMODE_NCS (0 << 0)
+#define ATMEL_SMC_MODE_READMODE_NRD (1 << 0)
+#define ATMEL_SMC_MODE_WRITEMODE_MASK BIT(1)
+#define ATMEL_SMC_MODE_WRITEMODE_NCS (0 << 1)
+#define ATMEL_SMC_MODE_WRITEMODE_NWE (1 << 1)
+#define ATMEL_SMC_MODE_EXNWMODE_MASK GENMASK(5, 4)
+#define ATMEL_SMC_MODE_EXNWMODE_DISABLE (0 << 4)
+#define ATMEL_SMC_MODE_EXNWMODE_FROZEN (2 << 4)
+#define ATMEL_SMC_MODE_EXNWMODE_READY (3 << 4)
+#define ATMEL_SMC_MODE_BAT_MASK BIT(8)
+#define ATMEL_SMC_MODE_BAT_SELECT (0 << 8)
+#define ATMEL_SMC_MODE_BAT_WRITE (1 << 8)
+#define ATMEL_SMC_MODE_DBW_MASK GENMASK(13, 12)
+#define ATMEL_SMC_MODE_DBW_8 (0 << 12)
+#define ATMEL_SMC_MODE_DBW_16 (1 << 12)
+#define ATMEL_SMC_MODE_DBW_32 (2 << 12)
+#define ATMEL_SMC_MODE_TDF_MASK GENMASK(19, 16)
+#define ATMEL_SMC_MODE_TDF(x) (((x) - 1) << 16)
+#define ATMEL_SMC_MODE_TDF_MAX 16
+#define ATMEL_SMC_MODE_TDF_MIN 1
+#define ATMEL_SMC_MODE_TDFMODE_OPTIMIZED BIT(20)
+#define ATMEL_SMC_MODE_PMEN BIT(24)
+#define ATMEL_SMC_MODE_PS_MASK GENMASK(29, 28)
+#define ATMEL_SMC_MODE_PS_4 (0 << 28)
+#define ATMEL_SMC_MODE_PS_8 (1 << 28)
+#define ATMEL_SMC_MODE_PS_16 (2 << 28)
+#define ATMEL_SMC_MODE_PS_32 (3 << 28)
+
+#define ATMEL_HSMC_TIMINGS(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0xc)
+#define ATMEL_HSMC_TIMINGS_OCMS BIT(12)
+#define ATMEL_HSMC_TIMINGS_RBNSEL(x) ((x) << 28)
+#define ATMEL_HSMC_TIMINGS_NFSEL BIT(31)
+#define ATMEL_HSMC_TIMINGS_TCLR_SHIFT 0
+#define ATMEL_HSMC_TIMINGS_TADL_SHIFT 4
+#define ATMEL_HSMC_TIMINGS_TAR_SHIFT 8
+#define ATMEL_HSMC_TIMINGS_TRR_SHIFT 16
+#define ATMEL_HSMC_TIMINGS_TWB_SHIFT 24
+
+struct atmel_hsmc_reg_layout {
+ unsigned int timing_regs_offset;
+};
+
+/**
+ * struct atmel_smc_cs_conf - SMC CS config as described in the datasheet.
+ * @setup: NCS/NWE/NRD setup timings (not applicable to at91rm9200)
+ * @pulse: NCS/NWE/NRD pulse timings (not applicable to at91rm9200)
+ * @cycle: NWE/NRD cycle timings (not applicable to at91rm9200)
+ * @timings: advanced NAND related timings (only applicable to HSMC)
+ * @mode: all kind of config parameters (see the fields definition above).
+ * The mode fields are different on at91rm9200
+ */
+struct atmel_smc_cs_conf {
+ u32 setup;
+ u32 pulse;
+ u32 cycle;
+ u32 timings;
+ u32 mode;
+};
+
+void atmel_smc_cs_conf_init(struct atmel_smc_cs_conf *conf);
+int atmel_smc_cs_conf_set_timing(struct atmel_smc_cs_conf *conf,
+ unsigned int shift,
+ unsigned int ncycles);
+int atmel_smc_cs_conf_set_setup(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles);
+int atmel_smc_cs_conf_set_pulse(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles);
+int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf,
+ unsigned int shift, unsigned int ncycles);
+void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs,
+ const struct atmel_smc_cs_conf *conf);
+void atmel_hsmc_cs_conf_apply(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *reglayout,
+ int cs, const struct atmel_smc_cs_conf *conf);
+void atmel_smc_cs_conf_get(struct regmap *regmap, int cs,
+ struct atmel_smc_cs_conf *conf);
+void atmel_hsmc_cs_conf_get(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *reglayout,
+ int cs, struct atmel_smc_cs_conf *conf);
+const struct atmel_hsmc_reg_layout *
+atmel_hsmc_get_reg_layout(ofnode np);
+
+#endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */
--
2.25.1
More information about the U-Boot
mailing list