[PATCH] arm: dts: imx8mn-beacon-kit-u-boot: Fix broken booting

[Adam Ford]

On Sun, Jul 31, 2022 at 12:28 PM Michael Nazzareno Trimarchi
<michael at amarulasolutions.com> wrote:
>
> Hi Adam
>
> On Sun, Jul 31, 2022 at 7:16 PM Adam Ford <aford173 at gmail.com> wrote:
> >
> > When the imx8mm.dtsi file was pulled in from Linux, the UARTs
> > were moved into an spba sub-node which wasn't being included
> > in the SPL device tree.  This meant the references to the UART
> > weren't being handled properly and when booting the system would
> > constantly reboot.  Fix this by adding the spba node to the spl
> > device tree to restore normal booting.
> >
> > Fixes: 4e5114daf9eb ("imx8mn: synchronise device tree with linux")
> > Signed-off-by: Adam Ford <aford173 at gmail.com>
> >
> > diff --git a/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi b/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
> > index 5f83952402..0efa6862eb 100644
> > --- a/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
> > +++ b/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
> > @@ -106,6 +106,10 @@
> >         u-boot,off-on-delay-us = <20000>;
> >  };
> >
> > +&spba1 {
> > +       u-boot,dm-spl;
> > +};
> > +
> >  &uart2 {
> >         u-boot,dm-spl;
> >  };
> > --
> > 2.34.1
> >
>
> Are you going to include it in imx8mn-u-boot.dtsi or do we need to
> patch every single board?

This is a temporary fix until I generate the common imx8mn-u-boot.dtsi
which will include this.

>
> Michael