kontron_pitx_imx8m does not start

[Heiko Thiery]

Hi Peng,

Am Di., 19. Juli 2022 um 07:17 Uhr schrieb Peng Fan <peng.fan at oss.nxp.com>:
>
>
>
> On 7/16/2022 4:31 PM, Heiko Thiery wrote:
> > Hi Peng,
> >
> > Am Sa., 16. Juli 2022 um 10:11 Uhr schrieb Peng Fan <peng.fan at oss.nxp.com>:
> >>
> >>
> >>
> >> On 7/15/2022 8:00 PM, Heiko Thiery wrote:
> >>> HI,
> >>>
> >>> Am Fr., 15. Juli 2022 um 13:18 Uhr schrieb Fabio Estevam <festevam at gmail.com>:
> >>>>
> >>>> Hi Heiko,
> >>>>
> >>>> On Fri, Jul 15, 2022 at 5:33 AM Heiko Thiery <heiko.thiery at gmail.com> wrote:
> >>>>
> >>>>> Error binding driver 'serial_mxc': -12
> >>>>
> >>>> Does the attached patch help?
> >>>
> >>> Unfortunately not .. I think the problem is not the SPL. Since the SPL
> >>> does not use SPL_DM_SERIAL.
> >>
> >> You have CLK_IMX8MQ enabled in SPL, it will consume much
> >> memory.
> >
> > You say CLK_IMX8MQ I have enabled. But I can't see where this should
> > be done. Also, I don't understand what this has to do with the fact
> > that the U-Boot (not SPL) shows the error messages. Is there a
> > connection between SPL and U-Boot here?
>
> In the very first mail, I only see you post out SPL log, not see
> U-Boot log. Could you please share your full log?

That was the only output shown on the console after enabling
DEBUG_UART. I thought "Trying to boot from SD card" was one of the
last issues of the SPL.
-- 
Heiko

> Thanks,
> Peng.
>
> >
> > --
> > Heiko
> >>
> >> Regards,
> >> Peng.
> >>
> >>>
> >>> --
> >>> Heiko