[bug] uboot 2022.07 hangs on rpi 2 with attached usb storage

[Simon Glass]

Hi Jan,

On Sat, 23 Jul 2022 at 09:03, Jan Palus <jpalus at fastmail.com> wrote:
>
> On 23.07.2022 16:43, Jan Palus wrote:
> > On 23.07.2022 16:19, Jan Palus wrote:
> > > On 22.07.2022 02:59, Simon Glass wrote:
> > > > Hi Jan,
> > > >
> > > > On Mon, 18 Jul 2022 at 11:48, Jan Palus <jpalus at fastmail.com> wrote:
> > > > >
> > > > > u-boot 2022.07 boots fine without any USB devices attached to
> > > > > RaspberryPi 2 however it hangs early on if external USB drive is
> > > > > connected, right after:
> > > > >
> > > > >    Request Sense returned 02 04 01
> > > > >
> > > > > git bisect indicates first commit to cause regression is:
> > > > >
> > > > >   8c9812a5d557c4eacf164147d7380b3af1b222ec is the first bad commit
> > > > >   commit 8c9812a5d557c4eacf164147d7380b3af1b222ec
> > > > >   Author: AKASHI Takahiro <takahiro.akashi at linaro.org>
> > > > >   Date:   Tue Mar 8 20:36:40 2022 +0900
> > > > >
> > > > >       usb: storage: call device_probe() after scanning
> > > > >
> > > > >       Every time a usb bus/port is scanned and a new device is detected,
> > > > >       we want to call device_probe() as it will give us a chance to run
> > > > >       additional post-processings for some purposes.
> > > > >
> > > > >       In particular, support for creating partitions on a device will be added.
> > > > >
> > > > >       Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
> > > > >       Reviewed-by: Simon Glass <sjg at chromium.org>
> > > > >
> > > > > Reverting this commit fixes the issue.
> > > > >
> > > > > Note that USB drive is TOSHIBA MQ04UBD200 and it's not used for booting.
> > > > > Also note that without this change 0 storage devices are detected even
> > > > > when drive is attached.
> > > >
> > > > I am not sure what is going on here. Can you provide the full console
> > > > trace of the boot? Any idea where it is hanging?
> > >
> > ...
> > >
> > > Now the place where it hangs is:
> > >
> > >   part_efi.c:
> > >
> > >   static int part_test_efi(struct blk_desc *dev_desc)
> > >   {
> > >           ALLOC_CACHE_ALIGN_BUFFER_PAD(legacy_mbr, legacymbr, 1, dev_desc->blksz);
> > >
> > > where dev_desc->blksz is 3782209548.
> > >
> >
> > So it appears block size is read incorrectly? Should be 512 but not sure
> > where this value 3782209548 is coming from, it's not block capacity
> > either. After plugging in Linux reports:
> >
> >   sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
>
> Since this was logged:
>
>   Device NOT ready
>      Request Sense returned 02 04 01
>
> then it seems capacity/block size were never determined (happens right
> after these log messages if they *don't* occur) so I guess they are
> random values and this usb storage should never have been probed? I'll
> stop here due to my cluelessness.

Are you able to post the full console log? It should start with the
'U-Boot' banner and end with the hang

Takahiro-san, so you have any ideas?

Regards,
Simon