[PATCH 0/4] phy: sun4i-usb: Allwinner D1 Support

[Samuel Holland]

This series updates the USB PHY driver to support the Allwinner D1,
which is a new RISC-V SoC. First it cleans up a couple of things that
tie the driver to the existing ARM port, and then it adds the new PHY
variant to the driver. Patches 3-4 are effectively the same as changes
made to the Linux driver.

After this series, the driver still uses the VBUS and ID pin options
from arch/arm/mach-sunxi/Kconfig. Those options will be replaced by
devicetree properties in a separate series.


Andre Przywara (1):
  phy: sun4i-usb: Rework HCI PHY (aka "pmu_unk1") handling

Samuel Holland (3):
  sunxi: Move INITIAL_USB_SCAN_DELAY to driver Kconfig
  phy: sun4i-usb: Drop use of arch-specific headers
  phy: sun4i-usb: Add D1 variant

 arch/arm/mach-sunxi/Kconfig           |  9 ------
 drivers/phy/allwinner/Kconfig         | 10 ++++++
 drivers/phy/allwinner/phy-sun4i-usb.c | 44 +++++++++++++++------------
 3 files changed, 34 insertions(+), 29 deletions(-)

-- 
2.35.1