[PATCH] imx8mm: Sync device tree with linux-next 20220711
Fabio Estevam
festevam at gmail.com
Fri Jul 15 18:57:19 CEST 2022
From: Fabio Estevam <festevam at denx.de>
Sync imx8mm.dtsi device tree with linux-next 20220711.
The main motivation for doing this sync is the sha256 regression
reported by Andrey Zhizhikin [1].
The linux-next kernel has the following commit, which disables
the job ring 0 and fixes the problem:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20220715&id=dc9c1ceb555ff661e6fc1081434600771f29657c
[1] https://lore.kernel.org/u-boot/AM6PR06MB46912207D9460CD9924F35DAA68B9@AM6PR06MB4691.eurprd06.prod.outlook.com/T/#t
Signed-off-by: Fabio Estevam <festevam at denx.de>
---
arch/arm/dts/imx8mm.dtsi | 653 ++++++++++++++++-------
include/dt-bindings/power/imx8mm-power.h | 9 +
2 files changed, 456 insertions(+), 206 deletions(-)
diff --git a/arch/arm/dts/imx8mm.dtsi b/arch/arm/dts/imx8mm.dtsi
index 724f6ddbf397..afb90f59c83c 100644
--- a/arch/arm/dts/imx8mm.dtsi
+++ b/arch/arm/dts/imx8mm.dtsi
@@ -4,11 +4,11 @@
*/
#include <dt-bindings/clock/imx8mm-clock.h>
-#include <dt-bindings/power/imx8mm-power.h>
-#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/thermal/thermal.h>
#include "imx8mm-pinfunc.h"
@@ -65,6 +65,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
nvmem-cells = <&cpu_speed_grade>;
@@ -80,6 +86,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
@@ -93,6 +105,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
@@ -106,6 +124,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
@@ -114,6 +138,10 @@
A53_L2: l2-cache0 {
compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
};
};
@@ -184,7 +212,7 @@
clk_ext4: clock-ext4 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <133000000>;
+ clock-frequency = <133000000>;
clock-output-names = "clk_ext4";
};
@@ -194,10 +222,9 @@
};
pmu {
- compatible = "arm,armv8-pmuv3";
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
};
timer {
@@ -260,11 +287,14 @@
clock-names = "main_clk";
};
- soc at 0 {
- compatible = "simple-bus";
+ soc: soc at 0 {
+ compatible = "fsl,imx8mm-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
+ dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
+ nvmem-cells = <&imx8mm_uid>;
+ nvmem-cell-names = "soc_unique_id";
aips1: bus at 30000000 {
compatible = "fsl,aips-bus", "simple-bus";
@@ -273,117 +303,125 @@
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
- sai1: sai at 30010000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
- reg = <0x30010000 0x10000>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
- <&clk IMX8MM_CLK_SAI1_ROOT>,
- <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ spba2: spba-bus at 30000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000000 0x100000>;
+ ranges;
+
+ sai1: sai at 30010000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+ reg = <0x30010000 0x10000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+ <&clk IMX8MM_CLK_SAI1_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- sai2: sai at 30020000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
- reg = <0x30020000 0x10000>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
- <&clk IMX8MM_CLK_SAI2_ROOT>,
- <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ sai2: sai at 30020000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+ reg = <0x30020000 0x10000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
+ <&clk IMX8MM_CLK_SAI2_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- sai3: sai at 30030000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
- reg = <0x30030000 0x10000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
- <&clk IMX8MM_CLK_SAI3_ROOT>,
- <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ sai3: sai at 30030000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+ reg = <0x30030000 0x10000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
+ <&clk IMX8MM_CLK_SAI3_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- sai5: sai at 30050000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
- reg = <0x30050000 0x10000>;
- interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
- <&clk IMX8MM_CLK_SAI5_ROOT>,
- <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ sai5: sai at 30050000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+ reg = <0x30050000 0x10000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
+ <&clk IMX8MM_CLK_SAI5_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- sai6: sai at 30060000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
- reg = <0x30060000 0x10000>;
- interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
- <&clk IMX8MM_CLK_SAI6_ROOT>,
- <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ sai6: sai at 30060000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+ reg = <0x30060000 0x10000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
+ <&clk IMX8MM_CLK_SAI6_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- micfil: audio-controller at 30080000 {
- compatible = "fsl,imx8mm-micfil";
- reg = <0x30080000 0x10000>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_PDM_IPG>,
- <&clk IMX8MM_CLK_PDM_ROOT>,
- <&clk IMX8MM_AUDIO_PLL1_OUT>,
- <&clk IMX8MM_AUDIO_PLL2_OUT>,
- <&clk IMX8MM_CLK_EXT3>;
- clock-names = "ipg_clk", "ipg_clk_app",
- "pll8k", "pll11k", "clkext3";
- dmas = <&sdma2 24 25 0x80000000>;
- dma-names = "rx";
- status = "disabled";
- };
+ micfil: audio-controller at 30080000 {
+ compatible = "fsl,imx8mm-micfil";
+ reg = <0x30080000 0x10000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+ <&clk IMX8MM_CLK_PDM_ROOT>,
+ <&clk IMX8MM_AUDIO_PLL1_OUT>,
+ <&clk IMX8MM_AUDIO_PLL2_OUT>,
+ <&clk IMX8MM_CLK_EXT3>;
+ clock-names = "ipg_clk", "ipg_clk_app",
+ "pll8k", "pll11k", "clkext3";
+ dmas = <&sdma2 24 25 0x80000000>;
+ dma-names = "rx";
+ status = "disabled";
+ };
- spdif1: spdif at 30090000 {
- compatible = "fsl,imx35-spdif";
- reg = <0x30090000 0x10000>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
- <&clk IMX8MM_CLK_24M>, /* rxtx0 */
- <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
- <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
- <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
- <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
- <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
- <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
- <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
- <&clk IMX8MM_CLK_DUMMY>; /* spba */
- clock-names = "core", "rxtx0",
- "rxtx1", "rxtx2",
- "rxtx3", "rxtx4",
- "rxtx5", "rxtx6",
- "rxtx7", "spba";
- dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
- dma-names = "rx", "tx";
- status = "disabled";
+ spdif1: spdif at 30090000 {
+ compatible = "fsl,imx35-spdif";
+ reg = <0x30090000 0x10000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
+ <&clk IMX8MM_CLK_24M>, /* rxtx0 */
+ <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
+ <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
+ <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
+ <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
+ <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
+ <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
+ <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
+ <&clk IMX8MM_CLK_DUMMY>; /* spba */
+ clock-names = "core", "rxtx0",
+ "rxtx1", "rxtx2",
+ "rxtx3", "rxtx4",
+ "rxtx5", "rxtx6",
+ "rxtx7", "spba";
+ dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
};
gpio1: gpio at 30200000 {
@@ -522,9 +560,17 @@
#address-cells = <1>;
#size-cells = <1>;
+ imx8mm_uid: unique-id at 410 {
+ reg = <0x4 0x8>;
+ };
+
cpu_speed_grade: speed-grade at 10 {
reg = <0x10 4>;
};
+
+ fec_mac_address: mac-address at 90 {
+ reg = <0x90 6>;
+ };
};
anatop: anatop at 30360000 {
@@ -556,6 +602,11 @@
wakeup-source;
status = "disabled";
};
+
+ snvs_lpgpr: snvs-lpgpr {
+ compatible = "fsl,imx8mm-snvs-lpgpr",
+ "fsl,imx7d-snvs-lpgpr";
+ };
};
clk: clock-controller at 30380000 {
@@ -573,8 +624,7 @@
<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
<&clk IMX8MM_SYS_PLL3>,
<&clk IMX8MM_VIDEO_PLL1>,
- <&clk IMX8MM_AUDIO_PLL1>,
- <&clk IMX8MM_AUDIO_PLL2>;
+ <&clk IMX8MM_AUDIO_PLL1>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
<&clk IMX8MM_ARM_PLL_OUT>,
<&clk IMX8MM_SYS_PLL3_OUT>,
@@ -584,8 +634,7 @@
<400000000>,
<750000000>,
<594000000>,
- <393216000>,
- <361267200>;
+ <393216000>;
};
src: reset-controller at 30390000 {
@@ -598,6 +647,7 @@
gpc: gpc at 303a0000 {
compatible = "fsl,imx8mm-gpc";
reg = <0x303a0000 0x10000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <3>;
@@ -610,12 +660,15 @@
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
clocks = <&clk IMX8MM_CLK_USB_BUS>;
+ assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
};
pgc_pcie: power-domain at 1 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_PCIE>;
power-domains = <&pgc_hsiomix>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>;
};
pgc_otg1: power-domain at 2 {
@@ -634,32 +687,63 @@
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
- <&clk IMX8MM_CLK_GPU_AHB>;
+ <&clk IMX8MM_CLK_GPU_AHB>;
+ assigned-clocks = <&clk IMX8MM_CLK_GPU_AXI>,
+ <&clk IMX8MM_CLK_GPU_AHB>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
+ <&clk IMX8MM_SYS_PLL1_800M>;
+ assigned-clock-rates = <800000000>, <400000000>;
};
pgc_gpu: power-domain at 5 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_GPU>;
clocks = <&clk IMX8MM_CLK_GPU_AHB>,
- <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
- <&clk IMX8MM_CLK_GPU2D_ROOT>,
- <&clk IMX8MM_CLK_GPU3D_ROOT>;
+ <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MM_CLK_GPU2D_ROOT>,
+ <&clk IMX8MM_CLK_GPU3D_ROOT>;
resets = <&src IMX8MQ_RESET_GPU_RESET>;
power-domains = <&pgc_gpumix>;
};
- dispmix_pd: power-domain at 10 {
+ pgc_vpumix: power-domain at 6 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MM_POWER_DOMAIN_VPUMIX>;
+ clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
+ assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>;
+ };
+
+ pgc_vpu_g1: power-domain at 7 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MM_POWER_DOMAIN_VPUG1>;
+ };
+
+ pgc_vpu_g2: power-domain at 8 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MM_POWER_DOMAIN_VPUG2>;
+ };
+
+ pgc_vpu_h1: power-domain at 9 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MM_POWER_DOMAIN_VPUH1>;
+ };
+
+ pgc_dispmix: power-domain at 10 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
- clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
- <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
- <&clk IMX8MM_CLK_DISP_APB_ROOT>;
+ clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+ assigned-clocks = <&clk IMX8MM_CLK_DISP_AXI>,
+ <&clk IMX8MM_CLK_DISP_APB>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
+ <&clk IMX8MM_SYS_PLL1_800M>;
+ assigned-clock-rates = <500000000>, <200000000>;
};
- mipi_pd: power-domain at 11 {
+ pgc_mipi: power-domain at 11 {
#power-domain-cells = <0>;
reg = <IMX8MM_POWER_DOMAIN_MIPI>;
- power-domains = <&dispmix_pd>;
};
};
};
@@ -679,7 +763,7 @@
clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
<&clk IMX8MM_CLK_PWM1_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -690,7 +774,7 @@
clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
<&clk IMX8MM_CLK_PWM2_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -701,7 +785,7 @@
clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
<&clk IMX8MM_CLK_PWM3_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -712,7 +796,7 @@
clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
<&clk IMX8MM_CLK_PWM4_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -733,80 +817,88 @@
ranges = <0x30800000 0x30800000 0x400000>,
<0x8000000 0x8000000 0x10000000>;
- ecspi1: spi at 30820000 {
- compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+ spba1: spba-bus at 30800000 {
+ compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
- #size-cells = <0>;
- reg = <0x30820000 0x10000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
- <&clk IMX8MM_CLK_ECSPI1_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ #size-cells = <1>;
+ reg = <0x30800000 0x100000>;
+ ranges;
- ecspi2: spi at 30830000 {
- compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x30830000 0x10000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
- <&clk IMX8MM_CLK_ECSPI2_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ ecspi1: spi at 30820000 {
+ compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30820000 0x10000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
+ <&clk IMX8MM_CLK_ECSPI1_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- ecspi3: spi at 30840000 {
- compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x30840000 0x10000>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
- <&clk IMX8MM_CLK_ECSPI3_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ ecspi2: spi at 30830000 {
+ compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30830000 0x10000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
+ <&clk IMX8MM_CLK_ECSPI2_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- uart1: serial at 30860000 {
- compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
- reg = <0x30860000 0x10000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
- <&clk IMX8MM_CLK_UART1_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ ecspi3: spi at 30840000 {
+ compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30840000 0x10000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
+ <&clk IMX8MM_CLK_ECSPI3_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- uart3: serial at 30880000 {
- compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
- reg = <0x30880000 0x10000>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
- <&clk IMX8MM_CLK_UART3_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ uart1: serial at 30860000 {
+ compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+ reg = <0x30860000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
+ <&clk IMX8MM_CLK_UART1_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- uart2: serial at 30890000 {
- compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
- reg = <0x30890000 0x10000>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
- <&clk IMX8MM_CLK_UART2_ROOT>;
- clock-names = "ipg", "per";
- status = "disabled";
+ uart3: serial at 30880000 {
+ compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+ reg = <0x30880000 0x10000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
+ <&clk IMX8MM_CLK_UART3_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart2: serial at 30890000 {
+ compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+ reg = <0x30890000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
+ <&clk IMX8MM_CLK_UART2_ROOT>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
};
crypto: crypto at 30900000 {
@@ -824,6 +916,7 @@
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
sec_jr1: jr at 2000 {
@@ -908,7 +1001,7 @@
<&clk IMX8MM_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -922,7 +1015,7 @@
<&clk IMX8MM_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -936,7 +1029,7 @@
<&clk IMX8MM_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -950,7 +1043,7 @@
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
<&clk IMX8MM_CLK_QSPI_ROOT>;
- clock-names = "fspi", "fspi_en";
+ clock-names = "fspi_en", "fspi";
status = "disabled";
};
@@ -966,7 +1059,7 @@
};
fec1: ethernet at 30be0000 {
- compatible = "fsl,imx8mm-fec", "fsl,imx6sx-fec";
+ compatible = "fsl,imx8mm-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
reg = <0x30be0000 0x10000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
@@ -982,13 +1075,17 @@
assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
<&clk IMX8MM_CLK_ENET_TIMER>,
<&clk IMX8MM_CLK_ENET_REF>,
- <&clk IMX8MM_CLK_ENET_TIMER>;
+ <&clk IMX8MM_CLK_ENET_PHY_REF>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
<&clk IMX8MM_SYS_PLL2_100M>,
- <&clk IMX8MM_SYS_PLL2_125M>;
- assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+ <&clk IMX8MM_SYS_PLL2_125M>,
+ <&clk IMX8MM_SYS_PLL2_50M>;
+ assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
fsl,num-tx-queues = <3>;
fsl,num-rx-queues = <3>;
+ nvmem-cells = <&fec_mac_address>;
+ nvmem-cell-names = "mac-address";
+ fsl,stop-mode = <&gpr 0x10 3>;
status = "disabled";
};
@@ -1001,6 +1098,84 @@
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
+ csi: csi at 32e20000 {
+ compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
+ reg = <0x32e20000 0x1000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_CSI1_ROOT>;
+ clock-names = "mclk";
+ power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>;
+ status = "disabled";
+
+ port {
+ csi_in: endpoint {
+ remote-endpoint = <&imx8mm_mipi_csi_out>;
+ };
+ };
+ };
+
+ disp_blk_ctrl: blk-ctrl at 32e28000 {
+ compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
+ reg = <0x32e28000 0x100>;
+ power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+ <&pgc_dispmix>, <&pgc_mipi>,
+ <&pgc_mipi>;
+ power-domain-names = "bus", "csi-bridge",
+ "lcdif", "mipi-dsi",
+ "mipi-csi";
+ clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MM_CLK_CSI1_ROOT>,
+ <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MM_CLK_DISP_ROOT>,
+ <&clk IMX8MM_CLK_DSI_CORE>,
+ <&clk IMX8MM_CLK_DSI_PHY_REF>,
+ <&clk IMX8MM_CLK_CSI1_CORE>,
+ <&clk IMX8MM_CLK_CSI1_PHY_REF>;
+ clock-names = "csi-bridge-axi","csi-bridge-apb",
+ "csi-bridge-core", "lcdif-axi",
+ "lcdif-apb", "lcdif-pix",
+ "dsi-pclk", "dsi-ref",
+ "csi-aclk", "csi-pclk";
+ #power-domain-cells = <1>;
+ };
+
+ mipi_csi: mipi-csi at 32e30000 {
+ compatible = "fsl,imx8mm-mipi-csi2";
+ reg = <0x32e30000 0x1000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>,
+ <&clk IMX8MM_CLK_CSI1_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
+ <&clk IMX8MM_SYS_PLL2_1000M>;
+ clock-frequency = <333000000>;
+ clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MM_CLK_CSI1_ROOT>,
+ <&clk IMX8MM_CLK_CSI1_PHY_REF>,
+ <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+ clock-names = "pclk", "wrap", "phy", "axi";
+ power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ imx8mm_mipi_csi_out: endpoint {
+ remote-endpoint = <&csi_in>;
+ };
+ };
+ };
+ };
+
usbotg1: usb at 32e40000 {
compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
reg = <0x32e40000 0x200>;
@@ -1116,6 +1291,72 @@
status = "disabled";
};
+ gpu_3d: gpu at 38000000 {
+ compatible = "vivante,gc";
+ reg = <0x38000000 0x8000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+ <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MM_CLK_GPU3D_ROOT>,
+ <&clk IMX8MM_CLK_GPU3D_ROOT>;
+ clock-names = "reg", "bus", "core", "shader";
+ assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
+ <&clk IMX8MM_GPU_PLL_OUT>;
+ assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+ assigned-clock-rates = <0>, <1000000000>;
+ power-domains = <&pgc_gpu>;
+ };
+
+ gpu_2d: gpu at 38008000 {
+ compatible = "vivante,gc";
+ reg = <0x38008000 0x8000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+ <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MM_CLK_GPU2D_ROOT>;
+ clock-names = "reg", "bus", "core";
+ assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
+ <&clk IMX8MM_GPU_PLL_OUT>;
+ assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+ assigned-clock-rates = <0>, <1000000000>;
+ power-domains = <&pgc_gpu>;
+ };
+
+ vpu_g1: video-codec at 38300000 {
+ compatible = "nxp,imx8mm-vpu-g1";
+ reg = <0x38300000 0x10000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
+ power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
+ };
+
+ vpu_g2: video-codec at 38310000 {
+ compatible = "nxp,imx8mq-vpu-g2";
+ reg = <0x38310000 0x10000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
+ power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
+ };
+
+ vpu_blk_ctrl: blk-ctrl at 38330000 {
+ compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
+ reg = <0x38330000 0x100>;
+ power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
+ <&pgc_vpu_g2>, <&pgc_vpu_h1>;
+ power-domain-names = "bus", "g1", "g2", "h1";
+ clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
+ <&clk IMX8MM_CLK_VPU_G2_ROOT>,
+ <&clk IMX8MM_CLK_VPU_H1_ROOT>;
+ clock-names = "g1", "g2", "h1";
+ assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+ <&clk IMX8MM_CLK_VPU_G2>;
+ assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
+ <&clk IMX8MM_VPU_PLL_OUT>;
+ assigned-clock-rates = <600000000>,
+ <600000000>;
+ #power-domain-cells = <1>;
+ };
+
gic: interrupt-controller at 38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>, /* GIC Dist */
diff --git a/include/dt-bindings/power/imx8mm-power.h b/include/dt-bindings/power/imx8mm-power.h
index fc9c2e16aadc..648938f24c8e 100644
--- a/include/dt-bindings/power/imx8mm-power.h
+++ b/include/dt-bindings/power/imx8mm-power.h
@@ -19,4 +19,13 @@
#define IMX8MM_POWER_DOMAIN_DISPMIX 10
#define IMX8MM_POWER_DOMAIN_MIPI 11
+#define IMX8MM_VPUBLK_PD_G1 0
+#define IMX8MM_VPUBLK_PD_G2 1
+#define IMX8MM_VPUBLK_PD_H1 2
+
+#define IMX8MM_DISPBLK_PD_CSI_BRIDGE 0
+#define IMX8MM_DISPBLK_PD_LCDIF 1
+#define IMX8MM_DISPBLK_PD_MIPI_DSI 2
+#define IMX8MM_DISPBLK_PD_MIPI_CSI 3
+
#endif
--
2.25.1
More information about the U-Boot
mailing list