[RESEND PATCH v2] clk: update clk_clean_rate_cache to use private clk struct
Patrick Delaunay
patrick.delaunay at foss.st.com
Tue Jul 12 14:24:03 CEST 2022
In clk_clean_rate_cache, clk->rate should update the private clock
struct, in particular when CCF is activated, to save the cached
rate value.
When clk_get_parent_rate is called, the cached information
is read from pclk->rate, with pclk = clk_get_parent(clk).
As the cached is read from private clk data, the update should
be done also on it.
Fixes: 6b7fd3128f7 ("clk: fix set_rate to clean up cached rates for the hierarchy")
Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
---
Changes in v2:
- set *clkp = clk when CCF is not activated and when the clock is not found
drivers/clk/clk-uclass.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c
index b89c77bf794..5cfa022a6dc 100644
--- a/drivers/clk/clk-uclass.c
+++ b/drivers/clk/clk-uclass.c
@@ -544,6 +544,19 @@ ulong clk_round_rate(struct clk *clk, ulong rate)
return ops->round_rate(clk, rate);
}
+static void clk_get_priv(struct clk *clk, struct clk **clkp)
+{
+ *clkp = clk;
+
+ /* get private clock struct associated to the provided clock */
+ if (CONFIG_IS_ENABLED(CLK_CCF)) {
+ /* Take id 0 as a non-valid clk, such as dummy */
+ if (clk->id)
+ clk_get_by_id(clk->id, clkp);
+ }
+}
+
+/* clean cache, called with private clock struct */
static void clk_clean_rate_cache(struct clk *clk)
{
struct udevice *child_dev;
@@ -563,6 +576,7 @@ static void clk_clean_rate_cache(struct clk *clk)
ulong clk_set_rate(struct clk *clk, ulong rate)
{
const struct clk_ops *ops;
+ struct clk *clkp;
debug("%s(clk=%p, rate=%lu)\n", __func__, clk, rate);
if (!clk_valid(clk))
@@ -572,8 +586,10 @@ ulong clk_set_rate(struct clk *clk, ulong rate)
if (!ops->set_rate)
return -ENOSYS;
+ /* get private clock struct used for cache */
+ clk_get_priv(clk, &clkp);
/* Clean up cached rates for us and all child clocks */
- clk_clean_rate_cache(clk);
+ clk_clean_rate_cache(clkp);
return ops->set_rate(clk, rate);
}
--
2.25.1
More information about the U-Boot
mailing list