[PATCH V2 42/53] net: fec_mxc: support i.MX93

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

Support i.MX93 in fec_mxc driver

Reviewed-by: Ramon Fried <rfried.dev at gmail.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/net/Kconfig   | 2 +-
 drivers/net/fec_mxc.c | 4 +++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b671e72580e..5d90a924aab 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -349,7 +349,7 @@ config FEC_MXC_MDIO_BASE
 
 config FEC_MXC
 	bool "FEC Ethernet controller"
-	depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || IMX8ULP || VF610
+	depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || IMX8ULP || IMX93 || VF610
 	help
 	  This driver supports the 10/100 Fast Ethernet controller for
 	  NXP i.MX processors.
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index a623a5c45e4..8bc2b46d403 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -598,7 +598,8 @@ static int fecmxc_init(struct udevice *dev)
 	writel(0x00000000, &fec->eth->gaddr2);
 
 	/* Do not access reserved register */
-	if (!is_mx6ul() && !is_mx6ull() && !is_imx8() && !is_imx8m() && !is_imx8ulp()) {
+	if (!is_mx6ul() && !is_mx6ull() && !is_imx8() && !is_imx8m() && !is_imx8ulp() &&
+	    !is_imx93()) {
 		/* clear MIB RAM */
 		for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4)
 			writel(0, i);
@@ -1357,6 +1358,7 @@ static const struct udevice_id fecmxc_ids[] = {
 	{ .compatible = "fsl,imx53-fec" },
 	{ .compatible = "fsl,imx7d-fec" },
 	{ .compatible = "fsl,mvf600-fec" },
+	{ .compatible = "fsl,imx93-fec" },
 	{ }
 };
 
-- 
2.36.0