[PATCH 2/2] mvebu: uDPU: disable non-present peripherals

Pali Rohár pali at kernel.org
Fri Jun 3 14:43:04 CEST 2022


On Friday 03 June 2022 12:53:05 Robert Marko wrote:
> uDPU like eDPU does not expose SCSI based peripherals like SATA nor PCI
> and for sure it does not have the Intel E1000 PCI card.
> 
> So, like for eDPU remove those from the defconfig.
> 
> Signed-off-by: Robert Marko <robert.marko at sartura.hr>

Reviewed-by: Pali Rohár <pali at kernel.org>

> ---
>  configs/uDPU_defconfig | 7 +------
>  1 file changed, 1 insertion(+), 6 deletions(-)
> 
> diff --git a/configs/uDPU_defconfig b/configs/uDPU_defconfig
> index f7cd1a0589..ec7cda6a29 100644
> --- a/configs/uDPU_defconfig
> +++ b/configs/uDPU_defconfig
> @@ -12,7 +12,6 @@ CONFIG_DEFAULT_DEVICE_TREE="armada-3720-uDPU"
>  CONFIG_DEBUG_UART_BASE=0xd0012000
>  CONFIG_SYS_LOAD_ADDR=0x6000000
>  CONFIG_DEBUG_UART=y
> -CONFIG_AHCI=y
>  CONFIG_DISTRO_DEFAULTS=y
>  # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
>  CONFIG_FIT=y
> @@ -33,7 +32,6 @@ CONFIG_CMD_GPIO=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
>  CONFIG_CMD_MTD=y
> -CONFIG_CMD_PCI=y
>  CONFIG_CMD_SPI=y
>  CONFIG_CMD_USB=y
>  # CONFIG_CMD_SETEXPR is not set
> @@ -49,7 +47,6 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>  CONFIG_ARP_TIMEOUT=200
>  CONFIG_NET_RETRY_COUNT=50
>  CONFIG_NET_RANDOM_ETHADDR=y
> -CONFIG_AHCI_MVEBU=y
>  CONFIG_CLK=y
>  CONFIG_CLK_MVEBU=y
>  CONFIG_DM_I2C=y
> @@ -72,17 +69,15 @@ CONFIG_PHYLIB_10G=y
>  CONFIG_PHY_MARVELL=y
>  CONFIG_PHY_FIXED=y
>  CONFIG_PHY_GIGE=y
> -CONFIG_E1000=y
>  CONFIG_MVNETA=y
>  CONFIG_MVMDIO=y
> -CONFIG_PCI=y
> -CONFIG_PCI_AARDVARK=y
>  CONFIG_PHY=y
>  CONFIG_MVEBU_COMPHY_SUPPORT=y
>  CONFIG_PINCTRL=y
>  CONFIG_PINCTRL_ARMADA_37XX=y
>  CONFIG_DM_REGULATOR_FIXED=y
>  CONFIG_DM_REGULATOR_GPIO=y
> +# CONFIG_SCSI is not set
>  CONFIG_MVEBU_A3700_UART=y
>  CONFIG_MVEBU_A3700_SPI=y
>  CONFIG_SYSINFO=y
> -- 
> 2.36.1
> 


More information about the U-Boot mailing list