[PATCH 2/2] mvebu: uDPU: disable non-present peripherals

[Stefan Roese]

On 03.06.22 12:53, Robert Marko wrote:
> uDPU like eDPU does not expose SCSI based peripherals like SATA nor PCI
> and for sure it does not have the Intel E1000 PCI card.
> 
> So, like for eDPU remove those from the defconfig.
> 
> Signed-off-by: Robert Marko <robert.marko at sartura.hr>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   configs/uDPU_defconfig | 7 +------
>   1 file changed, 1 insertion(+), 6 deletions(-)
> 
> diff --git a/configs/uDPU_defconfig b/configs/uDPU_defconfig
> index f7cd1a0589..ec7cda6a29 100644
> --- a/configs/uDPU_defconfig
> +++ b/configs/uDPU_defconfig
> @@ -12,7 +12,6 @@ CONFIG_DEFAULT_DEVICE_TREE="armada-3720-uDPU"
>   CONFIG_DEBUG_UART_BASE=0xd0012000
>   CONFIG_SYS_LOAD_ADDR=0x6000000
>   CONFIG_DEBUG_UART=y
> -CONFIG_AHCI=y
>   CONFIG_DISTRO_DEFAULTS=y
>   # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
>   CONFIG_FIT=y
> @@ -33,7 +32,6 @@ CONFIG_CMD_GPIO=y
>   CONFIG_CMD_I2C=y
>   CONFIG_CMD_MMC=y
>   CONFIG_CMD_MTD=y
> -CONFIG_CMD_PCI=y
>   CONFIG_CMD_SPI=y
>   CONFIG_CMD_USB=y
>   # CONFIG_CMD_SETEXPR is not set
> @@ -49,7 +47,6 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>   CONFIG_ARP_TIMEOUT=200
>   CONFIG_NET_RETRY_COUNT=50
>   CONFIG_NET_RANDOM_ETHADDR=y
> -CONFIG_AHCI_MVEBU=y
>   CONFIG_CLK=y
>   CONFIG_CLK_MVEBU=y
>   CONFIG_DM_I2C=y
> @@ -72,17 +69,15 @@ CONFIG_PHYLIB_10G=y
>   CONFIG_PHY_MARVELL=y
>   CONFIG_PHY_FIXED=y
>   CONFIG_PHY_GIGE=y
> -CONFIG_E1000=y
>   CONFIG_MVNETA=y
>   CONFIG_MVMDIO=y
> -CONFIG_PCI=y
> -CONFIG_PCI_AARDVARK=y
>   CONFIG_PHY=y
>   CONFIG_MVEBU_COMPHY_SUPPORT=y
>   CONFIG_PINCTRL=y
>   CONFIG_PINCTRL_ARMADA_37XX=y
>   CONFIG_DM_REGULATOR_FIXED=y
>   CONFIG_DM_REGULATOR_GPIO=y
> +# CONFIG_SCSI is not set
>   CONFIG_MVEBU_A3700_UART=y
>   CONFIG_MVEBU_A3700_SPI=y
>   CONFIG_SYSINFO=y

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de