imx8mm: Invalid IVT structure

[Michael Nazzareno Trimarchi]

Hi

On Wed, Jun 8, 2022 at 4:13 PM Fabio Estevam <festevam at gmail.com> wrote:
>
> Hi,
>
> On top of tree U-Boot, when CONFIG_IMX_HAB=y is selected in
> imx8mm_evk_defconfig, the following error messages are seen:
>
> U-Boot SPL 2022.07-rc3-00097-g26aa5e5c3fbc-dirty (Jun 08 2022 - 10:59:56 -0300)
> SEC0:  RNG instantiated
> Normal Boot
> WDT:   Started watchdog at 30280000 with servicing (60s timeout)
> Trying to boot from MMC1
> hab fuse not enabled
>
> Authenticate image from DDR location 0x401fcdc0...
> bad magic magic=0x0 length=0x00 version=0x0
> bad length magic=0x0 length=0x00 version=0x0
> bad version magic=0x0 length=0x00 version=0x0
> Error: Invalid IVT structure

You need to have a sign image

Michael

> NOTICE:  BL31: v2.4(release):lf-5.15.5-1.0.0-10-gcb51a0faa4b6
> NOTICE:  BL31: Built : 10:50:11, Jun  8 2022
>
> The boot proceeds normally, despite the error messages above.
>
> Does anyone know how we could fix these errors?
>
> Thanks,
>
> Fabio Estevam



-- 
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
michael at amarulasolutions.com
__________________________________

Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
info at amarulasolutions.com
www.amarulasolutions.com