imx8mm: Invalid IVT structure

[Tommaso Merciai]

Hi,

On Wed, Jun 08, 2022 at 04:14:51PM +0200, Michael Nazzareno Trimarchi wrote:
> Hi
> 
> On Wed, Jun 8, 2022 at 4:13 PM Fabio Estevam <festevam at gmail.com> wrote:
> >
> > Hi,
> >
> > On top of tree U-Boot, when CONFIG_IMX_HAB=y is selected in
> > imx8mm_evk_defconfig, the following error messages are seen:
> >
> > U-Boot SPL 2022.07-rc3-00097-g26aa5e5c3fbc-dirty (Jun 08 2022 - 10:59:56 -0300)
> > SEC0:  RNG instantiated
> > Normal Boot
> > WDT:   Started watchdog at 30280000 with servicing (60s timeout)
> > Trying to boot from MMC1
> > hab fuse not enabled
> >
> > Authenticate image from DDR location 0x401fcdc0...
> > bad magic magic=0x0 length=0x00 version=0x0
> > bad length magic=0x0 length=0x00 version=0x0
> > bad version magic=0x0 length=0x00 version=0x0
> > Error: Invalid IVT structure
> 
> You need to have a sign image

Agree

Maybe this page can help you Fabio
https://boundarydevices.com/high-assurance-boot-hab-i-mx8m-edition/

Regards,
Tommaso

> 
> Michael
> 
> > NOTICE:  BL31: v2.4(release):lf-5.15.5-1.0.0-10-gcb51a0faa4b6
> > NOTICE:  BL31: Built : 10:50:11, Jun  8 2022
> >
> > The boot proceeds normally, despite the error messages above.
> >
> > Does anyone know how we could fix these errors?
> >
> > Thanks,
> >
> > Fabio Estevam
> 
> 
> 
> -- 
> Michael Nazzareno Trimarchi
> Co-Founder & Chief Executive Officer
> M. +39 347 913 2170
> michael at amarulasolutions.com
> __________________________________
> 
> Amarula Solutions BV
> Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
> T. +31 (0)85 111 9172
> info at amarulasolutions.com
> www.amarulasolutions.com

-- 
Tommaso Merciai
Embedded Linux Engineer
tommaso.merciai at amarulasolutions.com
__________________________________

Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info at amarulasolutions.com
www.amarulasolutions.com