[PATCH v3 0/6] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards

[Stefano Babic]

Hi Michael,

On 28.02.22 20:38, Michael Nazzareno Trimarchi wrote:
> Hi Stefano
> 
> Any plan to get those boards in?
> 

Sure, but according how Tom has already set up. Merge window closed at 
31th, January, and later patches (as these) if are not fixes, will go 
into -next.

Best regards,
Stefano

> On Thu, Feb 17, 2022 at 3:35 PM Ariel D'Alessandro
> <ariel.dalessandro at collabora.com> wrote:
>>
>> Introduce BSH SystemMaster (SMM) S2 board family, which consists of:
>> iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards.
>>
>> This patchset also adds support for NXP TJA11xx Ethernet PHYs.
>>
>> Changes in v3:
>> * Added nxp-c45-tja11xx driver.
>> * Added ethernet support to iMX8MN BSH SMM S2 boards.
>>
>> Changes in v2:
>> * Properly added MAINTAINERS entry.
>> * Fixed binman configuration.
>> * Picked device tree from kernel.
>> * Removed CONFIG_SPL_BUILD anti-pattern in board config.
>> * Removed downstream stuff in bootargs.
>> * Added board documentation.
>>
>> Ariel D'Alessandro (4):
>>    phy: nxp-c45-tja11xx: Rename functions to be c45 tja11xx specific
>>    iopoll: Extend read_poll_timeout macro to support variable parameters
>>    net: phy: Add phy_modify() accessor
>>    bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards
>>
>> Michael Trimarchi (2):
>>    imx8m: add regs used by GPMI
>>    net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driver
>>
>>   arch/arm/dts/Makefile                         |   2 +
>>   arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi    | 423 ++++++++
>>   .../dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi  | 225 +++++
>>   arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi    |  15 +
>>   arch/arm/dts/imx8mn-bsh-smm-s2.dts            |  48 +
>>   arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi |  15 +
>>   arch/arm/dts/imx8mn-bsh-smm-s2pro.dts         |  80 ++
>>   arch/arm/include/asm/arch-imx8m/imx-regs.h    |   7 +
>>   arch/arm/mach-imx/imx8m/Kconfig               |  15 +
>>   arch/arm/mach-socfpga/reset_manager_s10.c     |  20 +-
>>   board/bsh/imx8mn_smm_s2/Kconfig               |  49 +
>>   board/bsh/imx8mn_smm_s2/MAINTAINERS           |   8 +
>>   board/bsh/imx8mn_smm_s2/Makefile              |  13 +
>>   board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c   | 941 ++++++++++++++++++
>>   board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c   | 941 ++++++++++++++++++
>>   board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c       |  23 +
>>   board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg |  10 +
>>   board/bsh/imx8mn_smm_s2/spl.c                 |  93 ++
>>   configs/imx8mn_bsh_smm_s2_defconfig           |  97 ++
>>   configs/imx8mn_bsh_smm_s2pro_defconfig        |  94 ++
>>   doc/board/bsh/imx8mn_bsh_smm_s2.rst           |  62 ++
>>   doc/board/bsh/index.rst                       |   9 +
>>   doc/board/index.rst                           |   1 +
>>   drivers/mmc/rockchip_sdhci.c                  |   9 +-
>>   drivers/net/phy/Kconfig                       |   5 +
>>   drivers/net/phy/Makefile                      |   1 +
>>   drivers/net/phy/nxp-c45-tja11xx.c             |   6 +-
>>   drivers/net/phy/nxp-tja11xx.c                 | 277 ++++++
>>   drivers/net/phy/phy.c                         |  23 +
>>   include/configs/imx8mn_bsh_smm_s2.h           |  52 +
>>   include/configs/imx8mn_bsh_smm_s2_common.h    |  62 ++
>>   include/configs/imx8mn_bsh_smm_s2pro.h        |  35 +
>>   include/linux/iopoll.h                        |  12 +-
>>   include/phy.h                                 |   3 +
>>   34 files changed, 3654 insertions(+), 22 deletions(-)
>>   create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi
>>   create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi
>>   create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi
>>   create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2.dts
>>   create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi
>>   create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2pro.dts
>>   create mode 100644 board/bsh/imx8mn_smm_s2/Kconfig
>>   create mode 100644 board/bsh/imx8mn_smm_s2/MAINTAINERS
>>   create mode 100644 board/bsh/imx8mn_smm_s2/Makefile
>>   create mode 100644 board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c
>>   create mode 100644 board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c
>>   create mode 100644 board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c
>>   create mode 100644 board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg
>>   create mode 100644 board/bsh/imx8mn_smm_s2/spl.c
>>   create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig
>>   create mode 100644 configs/imx8mn_bsh_smm_s2pro_defconfig
>>   create mode 100644 doc/board/bsh/imx8mn_bsh_smm_s2.rst
>>   create mode 100644 doc/board/bsh/index.rst
>>   create mode 100644 drivers/net/phy/nxp-tja11xx.c
>>   create mode 100644 include/configs/imx8mn_bsh_smm_s2.h
>>   create mode 100644 include/configs/imx8mn_bsh_smm_s2_common.h
>>   create mode 100644 include/configs/imx8mn_bsh_smm_s2pro.h
>>
>> --
>> 2.34.1
>>
> 
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================