March 2022 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Mar 1 00:03:34 CET 2022
Ending: Thu Mar 31 22:47:11 CEST 2022
Messages: 3245

• [PATCH 02/27] imx: imx8ulp: include pcc/cgc header in clock header   Peng Fan (OSS)
• [PATCH 24/27] imx: imx8ulp_evk: enlarge CONFIG_NR_DRAM_BANKS   Peng Fan (OSS)
• [PATCH] ARM: dts: imx: Add flexspi node to i.MX8MP   Peng Fan (OSS)
• [PATCH] spi: nxp_fspi: Add i.MX8MP compatible string   Peng Fan (OSS)
• [PATCH 1/2] clk: ccf: Add some helper functions for clock ops   Peng Fan (OSS)
• [PATCH 2/2] clk: Use generic CCF ops where possible   Peng Fan (OSS)
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Peng Fan (OSS)
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Peng Fan (OSS)
• [PATCH] imx8ulp: Disable SPL exception vector   Peng Fan (OSS)
• [PATCH v2 0/4] IMXRT: Maintnice updates   Peng Fan (OSS)
• [PATCH] mmc: fsl_esdhc_imx: Add i.MX8MP compatible string   Peng Fan (OSS)
• [PATCH 1/2] ARM: imx: imx8m: Add 933 MHz PLL settings   Peng Fan (OSS)
• [PATCH 0/2] enable DM_SERIAL on imx8mn-evk and imx8mn-ddr4-evk   Peng Fan (OSS)
• [PATCH] imx: imx8mm/imx8mn_beacon: Remove redundant code   Peng Fan (OSS)
• data abort when run 'dhcp'   qianfanguijin at 163.com
• [PATCH v1] net: eth-uclass: Fix eth_halt   qianfanguijin at 163.com
• [PATCH v2 1/2] net: eth-uclass: Fix eth_halt   qianfanguijin at 163.com
• [PATCH v2 2/2] net: eth-uclass: Fix data abort when tftp get nonexistent file via usb   qianfanguijin at 163.com
• [PATCH v1 1/2] video: Add VIDEO_FONT_4x6 to Kconfig add fix compile waring   qianfanguijin at 163.com
• [PATCH v1 2/2] cmd: lcdputs: Escape special characters   qianfanguijin at 163.com
• [PATCH v2 1/3] video: Add VIDEO_FONT_4x6 to Kconfig add fix compile waring   qianfanguijin at 163.com
• [PATCH v2 2/3] cmd: lcdputs: Escape special characters   qianfanguijin at 163.com
• [PATCH v2 3/3] driver: video: font: Introduce 6x8 bitmap font   qianfanguijin at 163.com
• How to debug u-boot data abort   Abder
• Problem to build u-boot   Sarmad Ahmad
• AW: Problem to build u-boot   Sarmad Ahmad
• AW: Problem to build u-boot   Sarmad Ahmad
• AW: Problem to build u-boot   Sarmad Ahmad
• Promlem with booting on a cora-z7-10   Sarmad Ahmad
• [PATCH] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v2 0/2] Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v2 1/2] dt-bindings: imx8mq-clock: add mainline definitions   Angus Ainslie
• [PATCH v2 2/2] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v2 2/2] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v2] board: purism: add the Purism Librem5 phone   Angus Ainslie
• [PATCH v2 2/2] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v2 2/2] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v3 0/4] Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v3 1/4] dt-bindings: imx8mq-clock: add mainline definitions   Angus Ainslie
• [PATCH v3 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v3 3/4] clk: imx8m: reduce rate table duplication   Angus Ainslie
• [PATCH v3 4/4] clk: imx8m: remove code duplication   Angus Ainslie
• [PATCH v3 3/4] clk: imx8m: reduce rate table duplication   Angus Ainslie
• [PATCH v4 0/4] Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v4 1/4] dt-bindings: imx8mq-clock: add mainline definitions   Angus Ainslie
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v4 3/4] clk: imx8m: reduce rate table duplication   Angus Ainslie
• [PATCH v4 4/4] clk: imx8m: remove code duplication   Angus Ainslie
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Angus Ainslie
• [PATCH v2] core: devres: optionally build devres into the SPL   Angus Ainslie
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Angus Ainslie
• [PATCH v2] core: devres: optionally build devres into the SPL   Angus Ainslie
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Angus Ainslie
• [PATCH v5 0/3] Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v5 1/3] dt-bindings: imx8mq-clock: add mainline definitions   Angus Ainslie
• [PATCH v5 2/3] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v5 3/3] clk: imx8m: reduce rate table duplication   Angus Ainslie
• [PATCH v5 3/3] clk: imx8m: reduce rate table duplication   Angus Ainslie
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v6 0/3] Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v6 1/3] dt-bindings: imx8mq-clock: add mainline definitions   Angus Ainslie
• [PATCH v6 2/3] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v6 3/3] clk: imx8m: reduce rate table duplication   Angus Ainslie
• [PATCH v7 0/3] Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v7 1/3] dt-bindings: imx8mq-clock: add mainline definitions   Angus Ainslie
• [PATCH v7 2/3] clk: imx8mq: Add a clock driver for the imx8mq   Angus Ainslie
• [PATCH v7 3/3] clk: imx8m: reduce rate table duplication   Angus Ainslie
• [PATCH v6 0/3] Add a clock driver for the imx8mq   Angus Ainslie
• [RFC PATCH v3 1/2] efi_loader: introduce "bootefi bootindex" command   Takahiro Akashi
• [RFC PATCH v3 1/2] efi_loader: introduce "bootefi bootindex" command   Takahiro Akashi
• [RFC PATCH v3 2/2] bootmenu: add UEFI and disto_boot entries   Takahiro Akashi
• [RFC PATCH v3 2/2] bootmenu: add UEFI and disto_boot entries   Takahiro Akashi
• [PATCH v4 00/11] enable menu-driven boot device selection   Takahiro Akashi
• riscv64 - SiFive Unmatched regression?   Alex
• [RFC] Dumping load addresses - bootefi qemu gdb remote debugging   Alex
• [PATCH] efi_loader: Expose relocated address for gdb debugging purposes   Alex
• gpio_request_by_name for GPIOD_IS_OUT drives GPIO before specifically instructed to   Sean Anderson
• gpio_request_by_name for GPIOD_IS_OUT drives GPIO before specifically instructed to   Sean Anderson
• [PATCH 06/14] misc: Add support for nvmem cells   Sean Anderson
• [PATCH 00/17] arm: semihosting: Cleanups and new features   Sean Anderson
• [PATCH 01/17] doc: Convert semihosting readme to rST   Sean Anderson
• [PATCH 02/17] nxp: ls1046ardb: Convert README to rST   Sean Anderson
• [PATCH 03/17] doc: ls1046ardb: Expand boot mode section   Sean Anderson
• [PATCH 04/17] arm: smh: Add semihosting entry to MAINTAINERS   Sean Anderson
• [PATCH 05/17] arm: smh: Export semihosting functions   Sean Anderson
• [PATCH 06/17] arm: smh: Use numeric modes for smh_open   Sean Anderson
• [PATCH 07/17] arm: smh: Return errno on error   Sean Anderson
• [PATCH 08/17] arm: smh: Document functions in header   Sean Anderson
• [PATCH 09/17] arm: smh: Add some file manipulation commands   Sean Anderson
• [PATCH 10/17] spl: Add semihosting boot method   Sean Anderson
• [PATCH 11/17] fs: Add semihosting filesystem   Sean Anderson
• [PATCH 12/17] cmd: fdt: Use start/size for chosen instead of start/end   Sean Anderson
• [PATCH 13/17] arm: smh: Remove smhload command   Sean Anderson
• [PATCH 14/17] arm: smh: Add some functions for working with the host console   Sean Anderson
• [PATCH 15/17] serial: Add semihosting driver   Sean Anderson
• [PATCH 16/17] doc: smh: Update semihosting documentation   Sean Anderson
• [PATCH 17/17] ls1046ardb: Add support for JTAG boot   Sean Anderson
• [PATCH 00/17] arm: semihosting: Cleanups and new features   Sean Anderson
• Submitting patches for QorIQ components   Sean Anderson
• [PATCH 00/17] arm: semihosting: Cleanups and new features   Sean Anderson
• [PATCH 00/17] arm: semihosting: Cleanups and new features   Sean Anderson
• [PATCH v2 00/28] arm: semihosting: Cleanups and new features   Sean Anderson
• [PATCH v2 01/28] doc: Convert semihosting readme to rST   Sean Anderson
• [PATCH v2 02/28] nxp: ls1046ardb: Convert README to rST   Sean Anderson
• [PATCH v2 03/28] doc: ls1046ardb: Expand boot mode section   Sean Anderson
• [PATCH v2 04/28] doc: ls1046ardb: Document debug uart   Sean Anderson
• [PATCH v2 05/28] arm: smh: Add semihosting entry to MAINTAINERS   Sean Anderson
• [PATCH v2 06/28] arm: smh: Export semihosting functions   Sean Anderson
• [PATCH v2 07/28] arm: smh: Use numeric modes for smh_open   Sean Anderson
• [PATCH v2 08/28] arm: smh: Return errno on error   Sean Anderson
• [PATCH v2 09/28] arm: smh: Document functions in header   Sean Anderson
• [PATCH v2 10/28] arm: smh: Add some file manipulation commands   Sean Anderson
• [PATCH v2 11/28] spl: Add semihosting boot method   Sean Anderson
• [PATCH v2 12/28] fs: Add semihosting filesystem   Sean Anderson
• [PATCH v2 13/28] cmd: fdt: Use start/size for chosen instead of start/end   Sean Anderson
• [PATCH v2 14/28] arm: smh: Remove smhload command   Sean Anderson
• [PATCH v2 15/28] arm: smh: Add some functions for working with the host console   Sean Anderson
• [PATCH v2 16/28] serial: Add semihosting driver   Sean Anderson
• [PATCH v2 17/28] doc: smh: Update semihosting documentation   Sean Anderson
• [PATCH v2 18/28] ls1046ardb: Add support for JTAG boot   Sean Anderson
• [PATCH v2 19/28] arm64: Save esr in pt_regs   Sean Anderson
• [PATCH v2 20/28] arm64: Save spsr in pt_regs   Sean Anderson
• [PATCH v2 21/28] arm64: Import some ESR and SPSR defines from Linux   Sean Anderson
• [PATCH v2 22/28] arm: smh: Add option to detect semihosting   Sean Anderson
• [PATCH v2 23/28] arm: Catch non-emulated semihosting calls   Sean Anderson
• [PATCH v2 24/28] serial: smh: Initialize serial only if semihosting is enabled   Sean Anderson
• [PATCH v2 25/28] arm64: ls1046a: Support semihosting fallback   Sean Anderson
• [PATCH v2 26/28] serial: dm: Add support for puts   Sean Anderson
• [PATCH v2 27/28] serial: sandbox: Implement puts   Sean Anderson
• [PATCH v2 28/28] serial: smh: Implement puts for DM   Sean Anderson
• [PATCH v2 20/28] arm64: Save spsr in pt_regs   Sean Anderson
• [PATCH v2 26/28] serial: dm: Add support for puts   Sean Anderson
• [PATCH v2 00/28] arm: semihosting: Cleanups and new features   Sean Anderson
• [PATCH] env: Avoid using a leftover text-environment file   Sean Anderson
• [PATCH v2 26/28] serial: dm: Add support for puts   Sean Anderson
• [PATCH 2/2] Add option to use -Og   Sean Anderson
• [PATCH 06/14] misc: Add support for nvmem cells   Sean Anderson
• [PATCH v2 5/5] clk: scmi: register scmi clocks with CCF   Sean Anderson
• [PATCH 1/7] clk: Make rfree return void   Sean Anderson
• [PATCH 9/9] arm64: Import <asm/esr.h> from Linux   Sean Anderson
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Sean Anderson
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Sean Anderson
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Sean Anderson
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Sean Anderson
• How to register a "clk-divider" with a "clk_div_table"   Sean Anderson
• [PATCH 1/2] lib: time: Change behaviour of CONFIG_TIMER_EARLY   Sean Anderson
• [PATCH v1 4/8] clk: imx: Add i.MXRT11xx pllv3 variant   Sean Anderson
• [PATCH v1 5/8] clk: imx: Add initial support for i.MXRT1170 clock driver   Sean Anderson
• [PATCH v3 1/2] riscv: provide missing base extension functions   Sean Anderson
• [PATCH v3 2/2] cmd/sbi: add missing SBI information   Sean Anderson
• [PATCH 1/2] clk: ccf: Add some helper functions for clock ops   Sean Anderson
• [PATCH 2/2] clk: Use generic CCF ops where possible   Sean Anderson
• [PATCH v1 5/8] clk: imx: Add initial support for i.MXRT1170 clock driver   Sean Anderson
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Sean Anderson
• [PATCH v4 4/4] clk: imx8m: remove code duplication   Sean Anderson
• [PATCH v2 1/3] Add valgrind headers to U-Boot   Sean Anderson
• [PATCH 9/9] arm64: Import <asm/esr.h> from Linux   Sean Anderson
• [PATCH v3 00/29] arm: semihosting: Cleanups and new features   Sean Anderson
• [PATCH v3 01/29] doc: Convert semihosting readme to rST   Sean Anderson
• [PATCH v3 02/29] nxp: ls1046ardb: Convert README to rST   Sean Anderson
• [PATCH v3 03/29] doc: ls1046ardb: Expand boot mode section   Sean Anderson
• [PATCH v3 04/29] doc: ls1046ardb: Document debug uart   Sean Anderson
• [PATCH v3 05/29] arm: smh: Add semihosting entry to MAINTAINERS   Sean Anderson
• [PATCH v3 06/29] arm: smh: Export semihosting functions   Sean Anderson
• [PATCH v3 07/29] arm: smh: Use numeric modes for smh_open   Sean Anderson
• [PATCH v3 08/29] arm: smh: Return errno on error   Sean Anderson
• [PATCH v3 09/29] arm: smh: Document functions in header   Sean Anderson
• [PATCH v3 10/29] arm: smh: Add some file manipulation commands   Sean Anderson
• [PATCH v3 11/29] spl: Add semihosting boot method   Sean Anderson
• [PATCH v3 12/29] fs: Add semihosting filesystem   Sean Anderson
• [PATCH v3 13/29] cmd: fdt: Use start/size for chosen instead of start/end   Sean Anderson
• [PATCH v3 14/29] arm: smh: Remove smhload command   Sean Anderson
• [PATCH v3 15/29] arm: smh: Add some functions for working with the host console   Sean Anderson
• [PATCH v3 16/29] serial: Add semihosting driver   Sean Anderson
• [PATCH v3 17/29] doc: smh: Update semihosting documentation   Sean Anderson
• [PATCH v3 20/29] arm64: Save spsr in pt_regs   Sean Anderson
• [PATCH v3 22/29] arm: smh: Add option to detect semihosting   Sean Anderson
• [PATCH v3 23/29] arm64: Catch non-emulated semihosting calls   Sean Anderson
• [PATCH v3 24/29] serial: smh: Initialize serial only if semihosting is enabled   Sean Anderson
• [PATCH v3 25/29] arm64: ls1046a: Support semihosting fallback   Sean Anderson
• [PATCH v3 26/29] serial: dm: Add support for puts   Sean Anderson
• [PATCH v3 27/29] serial: sandbox: Implement puts   Sean Anderson
• [PATCH v3 29/29] serial: smh: Implement puts for DM   Sean Anderson
• [RESEND PATCH v3 18/29] ls1046ardb: Add support for JTAG boot   Sean Anderson
• [RESEND PATCH v3 19/29] arm64: Save esr in pt_regs   Sean Anderson
• [RESEND PATCH v3 21/29] arm64: Import some ESR and SPSR defines from Linux   Sean Anderson
• [RESEND PATCH v3 28/29] test: serial: Add test for putc/puts   Sean Anderson
• [PATCH v3 01/29] doc: Convert semihosting readme to rST   Sean Anderson
• [PATCH v3 00/29] arm: semihosting: Cleanups and new features   Sean Anderson
• [PATCH v3 0/3] malloc: Enable profiling dlmalloc with valgrind   Sean Anderson
• [PATCH v3 1/3] Add valgrind headers to U-Boot   Sean Anderson
• [PATCH v3 2/3] malloc: Annotate allocator for valgrind   Sean Anderson
• [PATCH v3 3/3] doc: sandbox: Document how to run sandbox with valgrind   Sean Anderson
• [PATCH] power-domain: Fix use of uninitialized value in dev_power_domain_ctrl   Sean Anderson
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Sean Anderson
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Sean Anderson
• [PATCH] sandbox: usb: Fix out-of-bounds read when fd=-1   Sean Anderson
• [PATCH] image: fit: Align hash output buffers   Sean Anderson
• [PATCH 0/6] net: fm: Verify Fman microcode   Sean Anderson
• [PATCH 1/6] ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME   Sean Anderson
• [PATCH 2/6] image: fit: Add some helpers for getting data   Sean Anderson
• [PATCH 3/6] misc: fs_loader: Add function to get the chosen loader   Sean Anderson
• [PATCH 4/6] net: fm: Add firmware name parameter   Sean Anderson
• [PATCH 5/6] net: fm: Support loading firmware from a filesystem   Sean Anderson
• [PATCH 6/6] net: fm: Add support for FIT firmware   Sean Anderson
• [PATCH 2/6] image: fit: Add some helpers for getting data   Sean Anderson
• [PATCH v3 16/29] serial: Add semihosting driver   Sean Anderson
• [PATCH v3 28/29] test: serial: Add test for putc/puts   Sean Anderson
• Layerscape DM_SERIAL (Was: Re: [PATCH v3 16/29] serial: Add semihosting driver)   Sean Anderson
• [PATCH] dm: core: Provide fallbacks for ofnode_conf_read_...   Sean Anderson
• [PATCH] treewide: Enable SPL_SEPARATE_BSS if SPL_BSS_START_ADDR is used   Sean Anderson
• [PATCH] dm: core: Use device_foreach_child where possible   Sean Anderson
• [PATCH] IOMUX: Fix access past end of console_devices   Sean Anderson
• [PATCH 0/4] mmc: sandbox: Some small fixes   Sean Anderson
• [PATCH 1/4] mmc: sandbox: Initialize the status register   Sean Anderson
• [PATCH 2/4] mmc: sandbox: Initialize backing buffer   Sean Anderson
• [PATCH 3/4] mmc: Import some defines for R1 responses   Sean Anderson
• [PATCH 4/4] mmc: sandbox: Set the response   Sean Anderson
• [PATCH] IOMUX: Fix access past end of console_devices   Sean Anderson
• [PATCH] IOMUX: Fix access past end of console_devices   Sean Anderson
• [PATCH] IOMUX: Fix access past end of console_devices   Sean Anderson
• [PATCH v3 0/3] malloc: Enable profiling dlmalloc with valgrind   Sean Anderson
• [PATCH 2/2] clk: Use generic CCF ops where possible   Sean Anderson
• [PATCH 0/7] clk: Make clk_free return void   Sean Anderson
• [PATCH 1/2] clk: ccf: Add some helper functions for clock ops   Sean Anderson
• [PATCH] clk: Consolidate some clock functions   Sean Anderson
• Please pull clk-2022.04-next   Sean Anderson
• [RFC PATCH] mips: dts: add initial support for ls1c300 SoC   Sean Anderson
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   ZHIZHIKIN Andrey
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   ZHIZHIKIN Andrey
• [PATCH v2 08/10] tpm: Add the RNG child device   Ilias Apalodimas
• [PATCH v3 1/8] tpm: rng: Change tpm_get_random to return an int   Ilias Apalodimas
• [PATCH v3 2/8] tpm: Fix the return type of tpm_startup   Ilias Apalodimas
• [PATCH v3 7/8] doc: rng: Add documentation for the rng command   Ilias Apalodimas
• [PATCH v3 6/8] cmd: rng: Add support for selecting RNG device   Ilias Apalodimas
• [PATCH v3 5/8] qemu: arm: Remove platform specific function to get RNG device   Ilias Apalodimas
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   Ilias Apalodimas
• [PATCH v3 08/19] dm: add tag support   Ilias Apalodimas
• [RFC PATCH v3 1/2] efi_loader: introduce "bootefi bootindex" command   Ilias Apalodimas
• [RFC PATCH v3 2/2] bootmenu: add UEFI and disto_boot entries   Ilias Apalodimas
• [RFC PATCH v3 2/2] bootmenu: add UEFI and disto_boot entries   Ilias Apalodimas
• [PATCH v3 24/31] bootstd: Add an implementation of EFI bootmgr   Ilias Apalodimas
• [PATCH v4 13/33] bootstd: Add the bootstd uclass and core implementation   Ilias Apalodimas
• [PATCH v5 4/9] tpm: Add the RNG child device   Ilias Apalodimas
• [PATCH] efi_loader: Set variable attributes when EFI_BUFFER_TOO_SMALL is returned   Ilias Apalodimas
• [PATCH] efi_loader: Set variable attributes when EFI_BUFFER_TOO_SMALL is returned   Ilias Apalodimas
• [PATCH v2] efi_loader: Set variable attributes when EFI_BUFFER_TOO_SMALL is returned   Ilias Apalodimas
• [PATCH] lib/crypto: support sha384/sha512 in x509/pkcs7   Ilias Apalodimas
• [PATCH] lib/crypto: support sha384/sha512 in x509/pkcs7   Ilias Apalodimas
• [PATCH v2 1/9] efi_loader: export efi_dp_shorten()   Ilias Apalodimas
• [RFC PATCH 5/6] FMP: Remove GUIDs for FIT and raw images   Ilias Apalodimas
• [RFC PATCH 6/6] mkeficapsule: Remove raw and FIT GUID types   Ilias Apalodimas
• [PATCH v3 1/3] efi_loader: nocolor command line attr for initrddump.efi   Ilias Apalodimas
• [PATCH v3 2/3] efi_loader: initrddump: drain input before prompt   Ilias Apalodimas
• [PATCH v4 01/11] bootmenu: fix menu API error handling   Ilias Apalodimas
• [PATCH v4 06/11] efi_loader: bootmgr: add booting from removable media   Ilias Apalodimas
• [PATCH v4 06/11] efi_loader: bootmgr: add booting from removable media   Ilias Apalodimas
• [PATCH v4 09/11] efi_loader: add menu-driven UEFI Boot Variable maintenance   Ilias Apalodimas
• [PATCH v4 10/11] bootmenu: add removable media entries   Ilias Apalodimas
• [PATCH v4 1/8] capsule: Add Image GUIDs and image index for platforms using capsule updates   Ilias Apalodimas
• [PATCH v4 2/8] capsule: FMP: Populate the image descriptor array from platform data   Ilias Apalodimas
• [PATCH v4 6/8] FMP: Remove GUIDs for FIT and raw images   Ilias Apalodimas
• [PATCH v4 7/8] mkeficapsule: Remove raw and FIT GUID types   Ilias Apalodimas
• [PATCH v4 8/8] doc: uefi: Update the capsule update related documentation   Ilias Apalodimas
• [PATCH v4 3/8] capsule: Put a check for image index before the update   Ilias Apalodimas
• [PATCH v4 4/8] board: Define set_dfu_alt_info() for boards with UEFI capsule update enabled   Ilias Apalodimas
• [PATCH] drivers: adc: fix return value if timeout occurs   Neil Armstrong
• [PATCH 1/2] doc: board: amlogic-p20x: fix FIP generation doc   Neil Armstrong
• [PATCH 2/2] doc: boards: amlogic: Add documentation on pre-generated FIP files   Neil Armstrong
• [PATCH v3 0/6] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Stefano Babic
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Stefano Babic
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Stefano Babic
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Stefano Babic
• [EXT] [PATCH] mtd: mxs_nand: default to legacy bch and rename to modern bch option   Stefano Babic
• [ANN] U-Boot v2022.04-rc5 released   Stefano Babic
• ubifs: fix journal replay wrt. xattr nodes   Ville Baillie
• [PATCH 1/1] ubifs: Fix journal replay wrt. xattr nodes   Ville Baillie
• [PATCH 1/1] ubifs: Fix journal replay wrt. xattr nodes   Ville Baillie
• [PATCH u-boot-marvell 5/8] arm: mvebu: turris_omnia: Allow to configure mSATA slot via env variable   Marek Behún
• [PATCH u-boot-marvell 2/8] arm: mvebu: turris_omnia: Provide env_sf_get_env_addr() function   Marek Behún
• [PATCH u-boot-marvell 6/8] arm: mvebu: turris_omnia: Extract code for disabling sata/pcie   Marek Behún
• [PATCH u-boot-marvell 8/8] arm: mvebu: turris_omnia: Add support for USB3.0 mode in WWAN MiniPCIe slot   Marek Behún
• [PATCH] tools: kwboot: Allow to specify custom baudrate only in supported operations   Marek Behún
• [PATCH] tools: kwboot: Check if baudrate value is supported before sending image   Marek Behún
• kwboot - positional tty argument   Marek Behún
• [PATCH] mmc: xenon_sdhci: remove wait_dat0 SDHCI OP   Marek Behún
• [PATCH u-boot-marvell] arm: mvebu: dts: turris_mox: fix non-working network / MDIO   Marek Behún
• [PATCH u-boot-net 00/14] u-boot-net refactors, fixes, cleanups   Marek Behún
• [PATCH u-boot-net 01/14] net: mdio-uclass: fix type for phy_mode_str and phy_handle_str   Marek Behún
• [PATCH u-boot-net 02/14] net: mdio-uclass: use ARRAY_SIZE()   Marek Behún
• [PATCH u-boot-net 03/14] net: introduce helpers to get PHY ofnode from MAC   Marek Behún
• [PATCH u-boot-net 04/14] net: mdio-uclass: add wrappers for read/write/reset operations   Marek Behún
• [PATCH u-boot-net 05/14] treewide: use dm_mdio_read/write/reset() wrappers   Marek Behún
• [PATCH u-boot-net 06/14] net: phy: fix parsing wrong property   Marek Behún
• [PATCH u-boot-net 07/14] net: introduce helpers to get PHY interface mode from a device/ofnode   Marek Behún
• [PATCH u-boot-net 08/14] treewide: Rename PHY_INTERFACE_MODE_COUNT to PHY_INTERFACE_MODE_MAX   Marek Behún
• [PATCH u-boot-net 09/14] treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA   Marek Behún
• [PATCH u-boot-net 10/14] phy: Move PHY_INTERFACE_MODE_NA to the beginning of the enum definition   Marek Behún
• [PATCH u-boot-net 11/14] net: phy: xilinx: Check interface type in ->config(), not ->probe()   Marek Behún
• [PATCH u-boot-net 12/14] net: phy: use ->is_c45 instead of is_10g_interface()   Marek Behún
• [PATCH u-boot-net 13/14] bcmgenet, sun8i_emac: Don't connect PHY two times   Marek Behún
• [PATCH u-boot-net 14/14] net: phy: don't require PHY interface mode during PHY creation   Marek Behún
• [PATCH u-boot-net v2 00/14] u-boot-net refactors, fixes, cleanups   Marek Behún
• [PATCH u-boot-net v2 01/14] net: mdio-uclass: fix type for phy_mode_str and phy_handle_str   Marek Behún
• [PATCH u-boot-net v2 02/14] net: mdio-uclass: use ARRAY_SIZE()   Marek Behún
• [PATCH u-boot-net v2 03/14] net: introduce helpers to get PHY ofnode from MAC   Marek Behún
• [PATCH u-boot-net v2 04/14] net: mdio-uclass: add wrappers for read/write/reset operations   Marek Behún
• [PATCH u-boot-net v2 05/14] treewide: use dm_mdio_read/write/reset() wrappers   Marek Behún
• [PATCH u-boot-net v2 06/14] net: phy: fix parsing wrong property   Marek Behún
• [PATCH u-boot-net v2 07/14] net: introduce helpers to get PHY interface mode from a device/ofnode   Marek Behún
• [PATCH u-boot-net v2 08/14] treewide: Rename PHY_INTERFACE_MODE_COUNT to PHY_INTERFACE_MODE_MAX   Marek Behún
• [PATCH u-boot-net v2 09/14] treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA   Marek Behún
• [PATCH u-boot-net v2 10/14] phy: Move PHY_INTERFACE_MODE_NA to the beginning of the enum definition   Marek Behún
• [PATCH u-boot-net v2 11/14] net: phy: xilinx: Check interface type in ->config(), not ->probe()   Marek Behún
• [PATCH u-boot-net v2 12/14] net: phy: use ->is_c45 instead of is_10g_interface()   Marek Behún
• [PATCH u-boot-net v2 13/14] bcmgenet, sun8i_emac: Don't connect PHY two times   Marek Behún
• [PATCH u-boot-net v2 14/14] net: phy: don't require PHY interface mode during PHY creation   Marek Behún
• [PATCH u-boot-marvell] arm: mvebu: dts: turris_mox: fix non-working USB port   Marek Behún
• [PATCH 2/4] net: mvneta: add SFP TX disable handling   Marek Behún
• [PATCH v2 2/4] net: mvneta: add SFP TX disable handling   Marek Behún
• [PATCH v3 2/4] net: mvneta: add SFP TX disable handling   Marek Behún
• [PATCH u-boot-net 03/14] net: introduce helpers to get PHY ofnode from MAC   Marek Behún
• [PATCH u-boot-net v3 00/14] u-boot-net refactors, fixes, cleanups   Marek Behún
• [PATCH u-boot-net v3 01/14] net: mdio-uclass: fix type for phy_mode_str and phy_handle_str   Marek Behún
• [PATCH u-boot-net v3 02/14] net: mdio-uclass: use ARRAY_SIZE()   Marek Behún
• [PATCH u-boot-net v3 03/14] net: introduce helpers to get PHY ofnode from MAC   Marek Behún
• [PATCH u-boot-net v3 04/14] net: mdio-uclass: add wrappers for read/write/reset operations   Marek Behún
• [PATCH u-boot-net v3 05/14] treewide: use dm_mdio_read/write/reset() wrappers   Marek Behún
• [PATCH u-boot-net v3 06/14] net: phy: fix parsing wrong property   Marek Behún
• [PATCH u-boot-net v3 07/14] net: introduce helpers to get PHY interface mode from a device/ofnode   Marek Behún
• [PATCH u-boot-net v3 08/14] treewide: Rename PHY_INTERFACE_MODE_COUNT to PHY_INTERFACE_MODE_MAX   Marek Behún
• [PATCH u-boot-net v3 09/14] treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA   Marek Behún
• [PATCH u-boot-net v3 10/14] phy: Move PHY_INTERFACE_MODE_NA to the beginning of the enum definition   Marek Behún
• [PATCH u-boot-net v3 11/14] net: phy: xilinx: Check interface type in ->config(), not ->probe()   Marek Behún
• [PATCH u-boot-net v3 12/14] net: phy: use ->is_c45 instead of is_10g_interface()   Marek Behún
• [PATCH u-boot-net v3 13/14] bcmgenet, sun8i_emac: Don't connect PHY two times   Marek Behún
• [PATCH u-boot-net v3 14/14] net: phy: don't require PHY interface mode during PHY creation   Marek Behún
• [PATCH 5/6] net: add MV88E61xx DSA driver   Marek Behún
• [PATCH 1/2] net: phy: marvell: Support reg config via "marvell, reg-init" DT property   Marek Behún
• [PATCH 1/1] Makefile: make clean should delete include/generated/env.in   Marek Behún
• [PATCH 1/2] net: phy: marvell: Support reg config via "marvell, reg-init" DT property   Marek Behún
• [PATCH v2 1/2] net: phy: marvell: Support reg config via "marvell,reg-init" DT property   Marek Behún
• [PATCH v2 2/2] net: phy: marvell: Add support for 88E1240 PHY   Marek Behún
• [PATCH 5/6] net: add MV88E61xx DSA driver   Marek Behún
• [PATCH v1 1/9] arm: nuvoton: Add support for Nuvoton NPCM845 BMC   Giulio Benetti
• [PATCH v1 1/9] arm: nuvoton: Add support for Nuvoton NPCM845 BMC   Giulio Benetti
• [PATCH v1 1/9] arm: nuvoton: Add support for Nuvoton NPCM845 BMC   Giulio Benetti
• [PATCH v2] rockchip: saradc: remove double semi-colon   Giulio Benetti
• [PATCH] drivers/adc/rockchip-saradc: remove double semi-colon   Giulio Benetti
• [PATCH] drivers: adc: fix return value if timeout occurs   Francois Berder
• [PATCH v2] drivers: adc: fix return value if timeout occurs   Francois Berder
• [EXT] Re: [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Dario Binacchi
• [PATCH] build: allow a downstream suffix in the version shown during boot   Nicolas Boulenguez
• [PATCH 08/22] keymile: Move sourcing of common Kconfig   Holger Brunck
• [PATCH 09/22] kmtegr1: Drop CONFIG_KMTEGR1   Holger Brunck
• [PATCH 10/22] Convert CONFIG_KM_COGE5UN et al to Kconfig   Holger Brunck
• [PATCH] spi: Add spi_get_bus_and_cs() new use_dt param   Patrice CHOTARD
• arm: stm32h7: Support for the STM32H747I-DISCO board   Patrice CHOTARD
• [PATCH] cmd: test: pinmux: Do not check all empty spaces   Patrice CHOTARD
• arm: stm32h7: Support for the STM32H747I-DISCO board   Patrice CHOTARD
• drivers: clk: stm32h7: Endless loop of dead in driver probe function   Patrice CHOTARD
• drivers: clk: stm32h7: Endless loop of dead in driver probe function   Patrice CHOTARD
• drivers: clk: stm32h7: Endless loop of dead in driver probe function   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Move vdd_io extras into Avenger96 extras   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Add DFU support for DHCOM recovery   Patrice CHOTARD
• [Uboot-stm32] [PATCH] arm: dts: stm32mp15: alignment with v5.17   Patrice CHOTARD
• [Uboot-stm32] [PATCH] video: stm32: stm32_ltdc: fix the check of return value of clk_set_rate()   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: st: common: update test on misc_read result in command stboard   Patrice CHOTARD
• [PATCH 1/2] stm32mp: bsec: add permanent lock write support   Patrice CHOTARD
• [PATCH 2/2] stm32mp1: bsec: add missing dev in function comment   Patrice CHOTARD
• [PATCH] mtd: rawnand: stm32_fmc2: add NAND Write Protect support   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Add USB OTG pinctrl and regulator nodes into SPL DT on DHCOR   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Move vdd_io extras into Avenger96 extras   Patrice CHOTARD
• [PATCH v3 1/2] ram: stm32mp1: Unconditionally enable ASR   Patrice CHOTARD
• [PATCH v3 2/2] stm32mp: psci: Implement PSCI system suspend and DRAM SSR   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Add DFU support for DHCOM recovery   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Add DFU support for DHCOM recovery   Patrice CHOTARD
• [Uboot-stm32] [PATCH] arm: dts: stm32mp15: alignment with v5.17   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Add DFU support for DHCOM recovery   Patrice CHOTARD
• [PATCH v2] cmd: pxe_utils: sysboot: replace cls command by video_clear in PXE parser   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/2] mmc: fix error message for unaligned erase request   Patrice CHOTARD
• [Uboot-stm32] [PATCH 2/2] env: mmc : align erase address and size on erase_grp_size   Patrice CHOTARD
• Issue with CI/CD   Patrice CHOTARD
• Issue with CI/CD   Patrice CHOTARD
• [PATCH 09/25] stm32f429-discovery: Migrate CONFIG_*_LED out of CONFIG namespace   Patrice CHOTARD
• [PATCH] spl: allow boot from first bootable partition   Jérôme Carretero
• [PATCH] spl: allow boot from first bootable partition   Jérôme Carretero
• [PATCH v2] spl: allow boot from first bootable partition   Jérôme Carretero
• [PATCH v3] spl: allow boot from first bootable partition   Jérôme Carretero
• [PATCH] boot: image: fixup zstd decompression buffer initialization typo   Jérôme Carretero
• [PATCH v2] boot: image: fixup zstd decompression buffer initialization typo   Jérôme Carretero
• [PATCH v2 5/5] clk: scmi: register scmi clocks with CCF   Etienne Carriere
• [PATCH v2 0/8] canaan k210 SoC fixes   Niklas Cassel
• [PATCH v2 1/8] k210: use the board vendor name rather than the marketing name   Niklas Cassel
• [PATCH v2 2/8] k210: dts: add missing power bus clocks   Niklas Cassel
• [PATCH v2 3/8] k210: dts: align fpioa node with Linux   Niklas Cassel
• [PATCH v2 4/8] k210: dts: align plic node with Linux   Niklas Cassel
• [PATCH v2 5/8] spi: dw: Force set K210 fifo length to 31   Niklas Cassel
• [PATCH v2 6/8] spi: dw: Actually mask interrupts   Niklas Cassel
• [PATCH v2 7/8] pinctrl: k210: Fix loop in k210_pc_get_drive()   Niklas Cassel
• [PATCH v2 8/8] pinctrl: k210: Fix bias-pull-up   Niklas Cassel
• [PATCH] spi: dw: Fix broken dw_spi_mem_ops()   Niklas Cassel
• [PATCH] mtd: spi-nor-ids: Enable quad read for Gigadevice gd25lq128   Niklas Cassel
• [PATCH v3] spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode   Patrice Chotard
• [PATCH v1 0/2] mtd: Allow to parse DT partitions for raw nand   Patrice Chotard
• [PATCH v1 1/2] mtd: Add flash_node in struct mtd_info   Patrice Chotard
• [PATCH v1 2/2] mtd: Update the way partitions are parsed   Patrice Chotard
• [PATCH v4 0/3] spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode   Patrice Chotard
• [PATCH v4 1/3] spi: spi-uclass: Add new spi_get_bus_and_cs() implementation   Patrice Chotard
• [PATCH v4 2/3] spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode   Patrice Chotard
• [PATCH v4 3/3] test: dm: spi: Replace _spi_get_bus_and_cs() by spi_get_bus_and_cs() in some case   Patrice Chotard
• [PATCH v1 1/9] arm: nuvoton: Add support for Nuvoton NPCM845 BMC   Stanley Chu
• [PATCH v1 1/9] arm: nuvoton: Add support for Nuvoton NPCM845 BMC   Stanley Chu
• [PATCH v1 1/9] arm: nuvoton: Add support for Nuvoton NPCM845 BMC   Stanley Chu
• [PATCH v1 1/9] arm: nuvoton: Add support for Nuvoton NPCM845 BMC   Stanley Chu
• [PATCH v1 1/9] arm: nuvoton: Add support for Nuvoton NPCM845 BMC   Stanley Chu
• [PATCH v1 1/9] arm: nuvoton: Add support for Nuvoton NPCM845 BMC   Stanley Chu
• [PATCH v1] pinctrl: nuvoton: Add NPCM8xx pinctrl driver   Stanley Chu
• [PATCH v2] pinctrl: nuvoton: Add NPCM8xx pinctrl driver   Stanley Chu
• [PATCH v3] pinctrl: nuvoton: Add NPCM8xx pinctrl driver   Stanley Chu
• [PATCH v4] pinctrl: nuvoton: Add NPCM8xx pinctrl driver   Stanley Chu
• [PATCH v5] pinctrl: nuvoton: Add NPCM8xx pinctrl driver   Stanley Chu
• [PATCH v4 4/4] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3568   Jaehoon Chung
• [PATCH 1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217   Jaehoon Chung
• [PATCH 2/3] power: pmic: Provide DM_PMIC support for tps65217 driver   Jaehoon Chung
• [PATCH] pmic: pca9450: Add PCA9450C compatible string   Jaehoon Chung
• [PATCH] power: zynqmp: Use zynqmp_pmufw_node() from firmware   Jaehoon Chung
• [PATCH v2] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON when necessary   Jaehoon Chung
• [PATCH] mmc: xenon_sdhci: remove wait_dat0 SDHCI OP   Jaehoon Chung
• [PATCH v2 1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217   Jaehoon Chung
• [PATCH v2 2/3] power: pmic: Provide DM_PMIC support for tps65217 driver   Jaehoon Chung
• [PATCH v2 3/3] defconfig: Enable DM_PMIC and DM PMIC_TPS65217 on AM335x EVM board   Jaehoon Chung
• [PATCH 2/2] pmic: pca9450: Add regulator driver   Jaehoon Chung
• [PATCH] mmc: xenon_sdhci: remove wait_dat0 SDHCI OP   Jaehoon Chung
• [PATCH 1/2] mmc: fix error message for unaligned erase request   Jaehoon Chung
• [PATCH] mmc: dw_mmc: set host_caps mmc modes to equivalent and lower buswidth   Jaehoon Chung
• [PATCH v5 0/3] rockchip: sdhci: Add HS400 Enhanced Strobe support   Jaehoon Chung
• [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [PATCH 2/2] pmic: pca9450: Add regulator driver   Jaehoon Chung
• [PATCH 04/11] exynos: Drop CONFIG_DEVICE_TREE_LIST   Jaehoon Chung
• [PATCH] mmc: rockchip_sdhci: Correct error checking   Jaehoon Chung
• [PATCH 19/22] exynos: Drop CONFIG_CLK_*   Jaehoon Chung
• [PATCH] mmc: zynq_sdhci: Fix SDx_BASECLK configuration   Jaehoon Chung
• [PATCH] power-domain: Fix use of uninitialized value in dev_power_domain_ctrl   Jaehoon Chung
• [PATCH] doc: mmc dev   Jaehoon Chung
• Booting RPI CM4 from Samsung NVMEs   Alexandru-Dorian Costache
• [PATCH 5/8] usb: ehci-mx6: Allow building SDP for imx8mm   Jaap Crezee
• [PATCH 5/8] usb: ehci-mx6: Allow building SDP for imx8mm   Jaap Crezee
• [PATCH 5/8] usb: ehci-mx6: Allow building SDP for imx8mm   Jaap Crezee
• [PATCH v4 0/6] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Ariel D'Alessandro
• [PATCH v4 1/6] imx8m: add regs used by GPMI   Ariel D'Alessandro
• [PATCH v4 2/6] phy: nxp-c45-tja11xx: Rename functions to be c45 tja11xx specific   Ariel D'Alessandro
• [PATCH v4 3/6] iopoll: Extend read_poll_timeout macro to support variable parameters   Ariel D'Alessandro
• [PATCH v4 4/6] net: phy: Add phy_modify() accessor   Ariel D'Alessandro
• [PATCH v4 5/6] net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driver   Ariel D'Alessandro
• [PATCH v4 6/6] bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Ariel D'Alessandro
• [PATCH v1] arm: dts: imx8mn_var_som: Set atf-bl31 blob entry type   Ariel D'Alessandro
• drivers: clk: stm32h7: Endless loop of dead in driver probe function   Patrick DELAUNAY
• [PATCH] cmd: pxe_utils: sysboot: replace cls command by video_clear in PXE parser   Patrick DELAUNAY
• [PATCH 1/3] rng: add OP-TEE based Random Number Generator   Patrick DELAUNAY
• [PATCH v2 1/3] rng: add OP-TEE based Random Number Generator   Patrick DELAUNAY
• [PATCH V2] dt-bindings: nvmem: add U-Boot environment variables binding   Alexander Dahl
• [PATCH 1/3] rng: add OP-TEE based Random Number Generator   Patrick Delaunay
• [PATCH 2/3] tee: optee: bind rng optee driver   Patrick Delaunay
• [PATCH 3/3] configs: add support of OPTEE RNG in stm32mp15 defconfig   Patrick Delaunay
• [PATCH] cmd: pxe_utils: sysboot: replace cls command by video_clear in PXE parser   Patrick Delaunay
• [PATCH v2] cmd: pxe_utils: sysboot: replace cls command by video_clear in PXE parser   Patrick Delaunay
• [PATCH v2 1/3] rng: add OP-TEE based Random Number Generator   Patrick Delaunay
• [PATCH v2 2/3] tee: optee: bind rng optee driver   Patrick Delaunay
• [PATCH v2 3/3] configs: add support of OPTEE RNG in stm32mp15 defconfig   Patrick Delaunay
• [PATCH 0/8] stm32mp: command stm32prog improvements   Patrick Delaunay
• [PATCH 1/8] stm32mp: stm32prog: fix comment   Patrick Delaunay
• [PATCH 2/8] stm32mp: stm32prog: add CONFIG_CMD_STM32PROG_OTP   Patrick Delaunay
• [PATCH 3/8] stm32mp: stm32prog: add TEE support in stm32prog command   Patrick Delaunay
• [PATCH 4/8] stm32mp: stm32prog: add support of STM32IMAGE version 2   Patrick Delaunay
• [PATCH 5/8] stm32mp: stm32prog: add support of UUID for FIP partition   Patrick Delaunay
• [PATCH 6/8] stm32mp: stm32prog: handle interruption during the first enumeration   Patrick Delaunay
• [PATCH 7/8] stm32mp: stm32prog: handle U-Boot script in flashlayout alternate   Patrick Delaunay
• [PATCH 8/8] stm32mp: stm32prog: handle flashlayout without STM32 image header   Patrick Delaunay
• [PATCH v3 1/3] rng: add OP-TEE based Random Number Generator   Patrick Delaunay
• [PATCH v3 2/3] tee: optee: bind rng optee driver   Patrick Delaunay
• [PATCH v3 3/3] configs: add support of OPTEE RNG in stm32mp15 defconfig   Patrick Delaunay
• [PATCH] doc: mmc dev   Patrick Delaunay
• [PATCH u-boot-marvell 00/10] tools: kwboot: Fix boot and terminal mode   Tony Dinh
• [PATCH u-boot-marvell 00/10] tools: kwboot: Fix boot and terminal mode   Tony Dinh
• [PATCH u-boot-marvell 00/10] tools: kwboot: Fix boot and terminal mode   Tony Dinh
• [PATCH u-boot-marvell 00/10] tools: kwboot: Fix boot and terminal mode   Tony Dinh
• [PATCH] tools: kwboot: Check if baudrate value is supported before sending image   Tony Dinh
• [PATCH] arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet   Tony Dinh
• [PATCH v2 3/3] tools: kwboot: Allow to mix positional arguments with option -b   Tony Dinh
• kwboot - positional tty argument   Tony Dinh
• [PATCH v3] arm: kirkwood: nas220: Add DM Ethernet, SATA, GPIO   Tony Dinh
• [PATCH v3] arm: kirkwood: nas220: Add DM Ethernet, SATA, GPIO   Tony Dinh
• [PATCH v3] arm: kirkwood: nas220: Add DM Ethernet, SATA, GPIO   Tony Dinh
• [PATCH] arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet   Tony Dinh
• [PATCH] arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet   Tony Dinh
• [PATCH] arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet   Tony Dinh
• [PATCH v3] arm: kirkwood: nas220: Add DM Ethernet, SATA, GPIO   Tony Dinh
• [PATCH] arm: kirkwood: Add nas440 board, Marvell 88SE6121 AHCI   Tony Dinh
• [PATCH] arm: kirkwood: Add nas440 board, Marvell 88SE6121 AHCI   Tony Dinh
• [PATCH] arm: kirkwood: Add nas440 board, Marvell 88SE6121 AHCI   Tony Dinh
• Question/issues about i.MX6 DDR configuration   Francesco Dolcini
• [PATCH] lib: rsa: use actual OpenSSL 1.1.0 EVP MD API   Yann Droneaud
• [PATCH] lib: rsa: use actual OpenSSL 1.1.0 EVP MD API   Yann Droneaud
• [PATCH 11/11] vexpress64: Add ARMv8R-64 board variant   Liviu Dudau
• [PATCH 0/2] sf: dataflash: add support for AT45DB641E   Luca Ellero
• [PATCH 1/2] sf: dataflash: add support for "extended ID"   Luca Ellero
• [PATCH 2/2] sf: dataflash: add support for AT45DB641E   Luca Ellero
• [PATCH] gpio: pca953x_gpio: add PCA957X support   Luca Ellero
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Fabio Estevam
• [PATCH 2/2] board: tbs2910: Convert to DM_SERIAL   Fabio Estevam
• [PATCH] warp7: Remove UART initialization code   Fabio Estevam
• [PATCH] mmc: fsl_esdhc_imx: Add i.MX8MP compatible string   Fabio Estevam
• [PATCH 1/2] pmic: pca9450: Add upstream regulators subnode match   Fabio Estevam
• [PATCH 2/2] pmic: pca9450: Add regulator driver   Fabio Estevam
• [PATCH] dm: Add docs to explain how to enable DM_SERIAL for a board   Fabio Estevam
• Problem to build u-boot   Fabio Estevam
• Problem to build u-boot   Fabio Estevam
• [PATCH] tbs2910: Convert to DM_SERIAL   Fabio Estevam
• [PATCH] dm: Add docs to explain how to enable DM_SERIAL for a board   Fabio Estevam
• [PATCH v2] dm: Add docs to explain how to enable DM_SERIAL for a board   Fabio Estevam
• u-boot v2022.01 and Arria-10 socdk not booting   Fabio Estevam
• Problem to build u-boot   Fabio Estevam
• GPMI NAND Regression on i.MX6S   Fabio Estevam
• [PATCH v2 7/9] imx8mm_evk: spl: enable pwm clock   Fabio Estevam
• [PATCH 8/9] arm: dts: imx8mm_evk: add pwm1/backlight support   Fabio Estevam
• [PATCH v2 7/9] imx8mm_evk: spl: enable pwm clock   Fabio Estevam
• [PATCH v2 7/9] imx8mm_evk: spl: enable pwm clock   Fabio Estevam
• Problem to build u-boot   Fabio Estevam
• riscv64 - SiFive Unmatched regression?   Fabio Estevam
• [PATCH 1/5] imx8mm-cl-iot-gate: Add SPL EEPROM support   Fabio Estevam
• [PATCH 2/5] imx8mm-cl-iot-gate: Retrieve the DDR type from EEPROM   Fabio Estevam
• [PATCH 3/5] imx8mm-cl-iot-gate: Retrieve the MAC address from EEPROM   Fabio Estevam
• [PATCH 4/5] imx8mm-cl-iot-gate: Retrieve the serial number from EEPROM   Fabio Estevam
• [PATCH 5/5] imx8mm-cl-iot-gate: Add redundand environment support   Fabio Estevam
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Fabio Estevam
• [PATCH] tbs2910: Convert to DM_SERIAL   Fabio Estevam
• [PATCH] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Fabio Estevam
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Fabio Estevam
• [PATCH] imx: ventana: enable ONFI detection to fix NAND chip configuration   Fabio Estevam
• [PATCH 1/2] arm: imx: imx8mm_beacon: Remove unnecessary configs   Fabio Estevam
• [PATCH 2/2] arm: imx: imx8mn_beacon: Remove unnecessary configs   Fabio Estevam
• [PATCH] imx8m: Use a sane SYS_MALLOC_F_LEN default   Fabio Estevam
• [PATCH v2] imx8m: Use a sane SYS_MALLOC_F_LEN default   Fabio Estevam
• [PATCH v2] imx8m: Use a sane SYS_MALLOC_F_LEN default   Fabio Estevam
• [PATCH] configs: imx6dl_mamoj_defconfig: Enable LTO on imx6dl_mamoj board   Fabio Estevam
• [PATCH v2] mtd: gpmi: fix the bch setting backward compatible issue   Fabio Estevam
• [PATCH] board: gw_ventana: gsc: fix GSC read/write functions   Fabio Estevam
• [RESEND PATCH] gpio: rgpio2p: Enhance reading of GPIO pin value   Fabio Estevam
• [PATCH v3] mtd: gpmi: fix the bch setting backward compatible issue   Fabio Estevam
• [PATCH v4 9/9] configs: imx8mm_evk: add pwm backlight support   Fabio Estevam
• [PATCH] ARM: imx: Decode ECSPI env location from i.MX8M ROMAPI tables   Fabio Estevam
• [PATCH v3] imx8/ls10xx: Use a sane SYS_MALLOC_F_LEN default   Fabio Estevam
• [PATCH 5/8] usb: ehci-mx6: Allow building SDP for imx8mm   Fabio Estevam
• [PATCH v2] imx8m: Use a sane SYS_MALLOC_F_LEN default   Fabio Estevam
• [PATCH 19/23] video: Support showing the U-Boot logo   Fabio Estevam
• [PATCH] video: Do not show splash and U-Boot logo simultaneously   Fabio Estevam
• [PATCH] board: gw_ventana: gsc: fix GSC read/write functions   Fabio Estevam
• [PATCH] mtd: rawnand: mxs_nand: Fix use_minimum_ecc for spl driver   Fabio Estevam
• [PATCH] arm: imx: parse-container: add some missing end of line   Fabio Estevam
• [PATCH v2] board: gateworks: venice: determine dram size at runtime   Fabio Estevam
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Fabio Estevam
• [PATCH] arm: dts: imx8m*-venice: add gpio hog support   Peng Fan
• [PATCH] imx8m{m,n}-venice-gw7902: add GSC ADC rail for VDD_5P0   Peng Fan
• [PATCH] board: venice: add spl_board_loader_name   Peng Fan
• [PATCH] board: gateworks venice: add support for GPY111 phy   Peng Fan
• [PATCH] tools: zynqmp: add support for PM_CONFIG_OBJECT_TYPE_BASE define   Adrian Fiergolski
• [PATCH] phy: nop-phy: Fix phy reset if no reset-gpio defined   Adam Ford
• [PATCH 1/2] net: fec: prevent undesired de-assertion of phy-reset on request   Adam Ford
• [PATCH] usb: gadget: ci: Make various ops const   Adam Ford
• [PATCH] ARM: mach-omap2: omap3: Make clock functions static   Adam Ford
• [PATCH 1/2] arm: imx: imx8mm_beacon: Remove unnecessary configs   Adam Ford
• [PATCH 2/2] arm: imx: imx8mn_beacon: Remove unnecessary configs   Adam Ford
• [PATCH v5 3/3] clk: imx8m: reduce rate table duplication   Adam Ford
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Adam Ford
• [PATCH v2] imx8m: Use a sane SYS_MALLOC_F_LEN default   Adam Ford
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Adam Ford
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Adam Ford
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Adam Ford
• [PATCH v3 5/6] net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driver   Ramon Fried
• [PATCH v3 4/6] net: phy: Add phy_modify() accessor   Ramon Fried
• [PATCH 1/2] net: phy: dp83867: avoid error in dp83867_of_init() when PHY has no OF node   Ramon Fried
• [PATCH 2/2] net: phy: atheros: avoid error in ar803x_of_init() when PHY has no OF node   Ramon Fried
• [PATCH 7/9] net: Remove CONFIG_BOOTP_DHCP_REQUEST_DELAY   Ramon Fried
• [PATCH] ARM: dts: net: dwc_eth_qos: Fix i.MX8MP compatible string   Ramon Fried
• [PATCH 1/2] net: fec: prevent undesired de-assertion of phy-reset on request   Ramon Fried
• [PATCH 2/2] net: eth-phy: prevent undesired de-assertion of phy-reset on request   Ramon Fried
• [PATCH 14/15] net: fec_mxc: Remove non-DM_ETH code   Ramon Fried
• [PATCH 1/9] net: gmac_rockchip: Fix misuse of GENMASK macro   Ramon Fried
• [PATCH u-boot-net 01/14] net: mdio-uclass: fix type for phy_mode_str and phy_handle_str   Ramon Fried
• [PATCH u-boot-net 02/14] net: mdio-uclass: use ARRAY_SIZE()   Ramon Fried
• [PATCH u-boot-net 04/14] net: mdio-uclass: add wrappers for read/write/reset operations   Ramon Fried
• [PATCH u-boot-net 03/14] net: introduce helpers to get PHY ofnode from MAC   Ramon Fried
• [PATCH u-boot-net 05/14] treewide: use dm_mdio_read/write/reset() wrappers   Ramon Fried
• [PATCH u-boot-net 06/14] net: phy: fix parsing wrong property   Ramon Fried
• [PATCH u-boot-net 07/14] net: introduce helpers to get PHY interface mode from a device/ofnode   Ramon Fried
• [PATCH u-boot-net 09/14] treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA   Ramon Fried
• [PATCH u-boot-net 10/14] phy: Move PHY_INTERFACE_MODE_NA to the beginning of the enum definition   Ramon Fried
• [PATCH u-boot-net 11/14] net: phy: xilinx: Check interface type in ->config(), not ->probe()   Ramon Fried
• [PATCH u-boot-net 12/14] net: phy: use ->is_c45 instead of is_10g_interface()   Ramon Fried
• [PATCH u-boot-net 13/14] bcmgenet, sun8i_emac: Don't connect PHY two times   Ramon Fried
• [PATCH u-boot-net 14/14] net: phy: don't require PHY interface mode during PHY creation   Ramon Fried
• [PATCH u-boot-net 00/14] u-boot-net refactors, fixes, cleanups   Ramon Fried
• [PATCH v13 1/2] net: Add TCP protocol   Ramon Fried
• TFTP hangs with fragmented IP packets   Ramon Fried
• [RESEND PATCH] gpio: rgpio2p: Enhance reading of GPIO pin value   Christoph Fritz
• AP152 & TP-Link Archer C7   Brice GIBOUDEAU
• [PATCH v2 07/10] tpm: rng: Move the TPM RNG functionality to driver model   Sughosh Ganu
• [PATCH v2 04/10] tpm: Move the TPM version detection functions to the uclass driver   Sughosh Ganu
• [PATCH v2 06/10] configs: chromebook_coral: Build TPMV1 library routines   Sughosh Ganu
• [PATCH v2 08/10] tpm: Add the RNG child device   Sughosh Ganu
• [PATCH v2 10/10] cmd: rng: Add support for selecting RNG device   Sughosh Ganu
• [PATCH v2 06/10] configs: chromebook_coral: Build TPMV1 library routines   Sughosh Ganu
• [PATCH v2 07/10] tpm: rng: Move the TPM RNG functionality to driver model   Sughosh Ganu
• [PATCH v2 08/10] tpm: Add the RNG child device   Sughosh Ganu
• [PATCH v3 0/8] tpm: rng: Move TPM RNG functionality to driver model   Sughosh Ganu
• [PATCH v3 1/8] tpm: rng: Change tpm_get_random to return an int   Sughosh Ganu
• [PATCH v3 2/8] tpm: Fix the return type of tpm_startup   Sughosh Ganu
• [PATCH v3 3/8] tpm: rng: Add driver model interface for TPM RNG device   Sughosh Ganu
• [PATCH v3 4/8] tpm: Add the RNG child device   Sughosh Ganu
• [PATCH v3 5/8] qemu: arm: Remove platform specific function to get RNG device   Sughosh Ganu
• [PATCH v3 6/8] cmd: rng: Add support for selecting RNG device   Sughosh Ganu
• [PATCH v3 7/8] doc: rng: Add documentation for the rng command   Sughosh Ganu
• [PATCH v3 8/8] test: rng: Add a UT testcase for the rng command   Sughosh Ganu
• [PATCH v2 08/10] tpm: Add the RNG child device   Sughosh Ganu
• [PATCH v2 07/10] tpm: rng: Move the TPM RNG functionality to driver model   Sughosh Ganu
• [PATCH v2 08/10] tpm: Add the RNG child device   Sughosh Ganu
• [PATCH v3 3/8] tpm: rng: Add driver model interface for TPM RNG device   Sughosh Ganu
• [PATCH v3 4/8] tpm: Add the RNG child device   Sughosh Ganu
• [PATCH v3 6/8] cmd: rng: Add support for selecting RNG device   Sughosh Ganu
• [PATCH v3 8/8] test: rng: Add a UT testcase for the rng command   Sughosh Ganu
• [PATCH v3 3/8] tpm: rng: Add driver model interface for TPM RNG device   Sughosh Ganu
• [PATCH v4 0/8] tpm: rng: Move TPM RNG functionality to driver model   Sughosh Ganu
• [PATCH v4 1/8] tpm: rng: Change tpm_get_random to return an int   Sughosh Ganu
• [PATCH v4 2/8] tpm: Fix the return type of tpm_startup   Sughosh Ganu
• [PATCH v4 3/8] tpm: rng: Add driver model interface for TPM RNG device   Sughosh Ganu
• [PATCH v4 4/8] tpm: Add the RNG child device   Sughosh Ganu
• [PATCH v4 5/8] qemu: arm: Remove platform specific function to get RNG device   Sughosh Ganu
• [PATCH v4 6/8] cmd: rng: Add support for selecting RNG device   Sughosh Ganu
• [PATCH v4 7/8] doc: rng: Add documentation for the rng command   Sughosh Ganu
• [PATCH v4 8/8] test: rng: Add a UT testcase for the rng command   Sughosh Ganu
• [PATCH v3 6/8] cmd: rng: Add support for selecting RNG device   Sughosh Ganu
• [PATCH v3 8/8] test: rng: Add a UT testcase for the rng command   Sughosh Ganu
• [PATCH v4 3/8] tpm: rng: Add driver model interface for TPM RNG device   Sughosh Ganu
• [PATCH v4 4/8] tpm: Add the RNG child device   Sughosh Ganu
• [PATCH v5 0/9] tpm: rng: Move TPM RNG functionality to driver model   Sughosh Ganu
• [PATCH v5 1/9] tpm: rng: Change tpm_get_random to return an int   Sughosh Ganu
• [PATCH v5 2/9] tpm: Fix the return type of tpm_startup   Sughosh Ganu
• [PATCH v5 3/9] tpm: rng: Add driver model interface for TPM RNG device   Sughosh Ganu
• [PATCH v5 4/9] tpm: Add the RNG child device   Sughosh Ganu
• [PATCH v5 5/9] qemu: arm: Remove platform specific function to get RNG device   Sughosh Ganu
• [PATCH v5 6/9] cmd: rng: Add support for selecting RNG device   Sughosh Ganu
• [PATCH v5 7/9] cmd: rng: Use a statically allocated array for random bytes   Sughosh Ganu
• [PATCH v5 8/9] doc: rng: Add documentation for the rng command   Sughosh Ganu
• [PATCH v5 9/9] test: rng: Add a UT testcase for the rng command   Sughosh Ganu
• [PATCH v5 7/9] cmd: rng: Use a statically allocated array for random bytes   Sughosh Ganu
• [PATCH v5 3/9] tpm: rng: Add driver model interface for TPM RNG device   Sughosh Ganu
• [PATCH v5 4/9] tpm: Add the RNG child device   Sughosh Ganu
• [PATCH v5 4/9] tpm: Add the RNG child device   Sughosh Ganu
• [PATCH v5 3/9] tpm: rng: Add driver model interface for TPM RNG device   Sughosh Ganu
• [PATCH v5 4/9] tpm: Add the RNG child device   Sughosh Ganu
• [RFC PATCH 0/6] efi: capsule: Image GUID usage cleanup   Sughosh Ganu
• [RFC PATCH 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Sughosh Ganu
• [RFC PATCH 2/6] capsule: FMP: Populate the image descriptor array from platform data   Sughosh Ganu
• [RFC PATCH 3/6] test: capsule: Modify the capsule tests to use GUID values for sandbox   Sughosh Ganu
• [RFC PATCH 4/6] doc: uefi: Update the capsule update related documentation   Sughosh Ganu
• [RFC PATCH 5/6] FMP: Remove GUIDs for FIT and raw images   Sughosh Ganu
• [RFC PATCH 6/6] mkeficapsule: Remove raw and FIT GUID types   Sughosh Ganu
• [RFC PATCH 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Sughosh Ganu
• [RFC PATCH 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Sughosh Ganu
• [RFC PATCH 6/6] mkeficapsule: Remove raw and FIT GUID types   Sughosh Ganu
• [RFC PATCH 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Sughosh Ganu
• [RFC PATCH 6/6] mkeficapsule: Remove raw and FIT GUID types   Sughosh Ganu
• [PATCH v5 6/9] cmd: rng: Add support for selecting RNG device   Sughosh Ganu
• [PATCH v5 7/9] cmd: rng: Use a statically allocated array for random bytes   Sughosh Ganu
• [PATCH v5 8/9] doc: rng: Add documentation for the rng command   Sughosh Ganu
• [PATCH v5 9/9] test: rng: Add a UT testcase for the rng command   Sughosh Ganu
• [PATCH v3 8/8] test: rng: Add a UT testcase for the rng command   Sughosh Ganu
• [PATCH v5 5/9] qemu: arm: Remove platform specific function to get RNG device   Sughosh Ganu
• [RFC PATCH 0/6] efi: capsule: Image GUID usage cleanup   Sughosh Ganu
• [RFC PATCH 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Sughosh Ganu
• [PATCH v2 0/6] efi: capsule: Image GUID usage cleanup   Sughosh Ganu
• [PATCH v2 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Sughosh Ganu
• [PATCH v2 2/6] capsule: FMP: Populate the image descriptor array from platform data   Sughosh Ganu
• [PATCH v2 3/6] test: capsule: Modify the capsule tests to use GUID values for sandbox   Sughosh Ganu
• [PATCH v2 4/6] doc: uefi: Update the capsule update related documentation   Sughosh Ganu
• [PATCH v2 5/6] FMP: Remove GUIDs for FIT and raw images   Sughosh Ganu
• [PATCH v2 6/6] mkeficapsule: Remove raw and FIT GUID types   Sughosh Ganu
• [PATCH v2 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Sughosh Ganu
• [RFC PATCH 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Sughosh Ganu
• [PATCH v3 0/9] efi: capsule: Capsule Update fixes and enhancements   Sughosh Ganu
• [PATCH v3 1/9] capsule: Add Image GUIDs and image index for platforms using capsule updates   Sughosh Ganu
• [PATCH v3 2/9] capsule: FMP: Populate the image descriptor array from platform data   Sughosh Ganu
• [PATCH v3 3/9] capsule: Put a check for image index before the update   Sughosh Ganu
• [PATCH v3 4/9] board: Define set_dfu_alt_info() for boards with UEFI capsule update enabled   Sughosh Ganu
• [PATCH v3 5/9] capsule: kconfig: Select SET_DFU_ALT_INFO config symbol for capsule update   Sughosh Ganu
• [PATCH v3 6/9] test: capsule: Modify the capsule tests to use GUID values for sandbox   Sughosh Ganu
• [PATCH v3 7/9] FMP: Remove GUIDs for FIT and raw images   Sughosh Ganu
• [PATCH v3 8/9] mkeficapsule: Remove raw and FIT GUID types   Sughosh Ganu
• [PATCH v3 9/9] doc: uefi: Update the capsule update related documentation   Sughosh Ganu
• [PATCH v3 4/9] board: Define set_dfu_alt_info() for boards with UEFI capsule update enabled   Sughosh Ganu
• [PATCH v3 5/9] capsule: kconfig: Select SET_DFU_ALT_INFO config symbol for capsule update   Sughosh Ganu
• [PATCH v3 5/9] capsule: kconfig: Select SET_DFU_ALT_INFO config symbol for capsule update   Sughosh Ganu
• [PATCH v4 0/8] efi: capsule: Capsule Update fixes and enhancements   Sughosh Ganu
• [PATCH v4 1/8] capsule: Add Image GUIDs and image index for platforms using capsule updates   Sughosh Ganu
• [PATCH v4 2/8] capsule: FMP: Populate the image descriptor array from platform data   Sughosh Ganu
• [PATCH v4 3/8] capsule: Put a check for image index before the update   Sughosh Ganu
• [PATCH v4 4/8] board: Define set_dfu_alt_info() for boards with UEFI capsule update enabled   Sughosh Ganu
• [PATCH v4 5/8] test: capsule: Modify the capsule tests to use GUID values for sandbox   Sughosh Ganu
• [PATCH v4 6/8] FMP: Remove GUIDs for FIT and raw images   Sughosh Ganu
• [PATCH v4 7/8] mkeficapsule: Remove raw and FIT GUID types   Sughosh Ganu
• [PATCH v4 8/8] doc: uefi: Update the capsule update related documentation   Sughosh Ganu
• [PATCH v4 2/8] capsule: FMP: Populate the image descriptor array from platform data   Sughosh Ganu
• [RFC] [PATCH] binman: support mkimage split files   Peter Geis
• [PATCH v2 23/25] rockchip: Support building the all output files in binman   Peter Geis
• [PATCH v2 23/25] rockchip: Support building the all output files in binman   Peter Geis
• [RFC] [PATCH] binman: support mkimage split files   Peter Geis
• [PATCH v2] binman: support mkimage separate files   Peter Geis
• [PATCH v2] binman: support mkimage separate files   Peter Geis
• [PATCH v2] binman: support mkimage separate files   Peter Geis
• [PATCH v1 01/11] clk: rockchip: rk3568: fix reset handler   Peter Geis
• [PATCH v1 07/11] rockchip: rk3568: add boot device detection   Peter Geis
• [PATCH v1 06/11] rockchip: handle bootrom recovery mode in spl   Peter Geis
• [PATCH v1 10/11] rockchip: rk3568: add dwc3 otg support   Peter Geis
• [PATCH v1 11/11] [RFC] rockchip: rk356x: attempt to fix ram detection   Peter Geis
• [PATCH v1 03/11] spi: rockchip-sfc: fix building rockchip-sfc   Peter Geis
• [PATCH v1 00/11] rockchip fixes and extend rk3568 support   Peter Geis
• [PATCH v1 06/11] rockchip: handle bootrom recovery mode in spl   Peter Geis
• [PATCH v1 06/11] rockchip: handle bootrom recovery mode in spl   Peter Geis
• [PATCH 0/8] ram: k3-ddrss: Enable DDRSS ECC for full DDR Space   Dave Gerlach
• [PATCH 1/8] arm: dts: k3-am642-r5-evm: Mark memory with u-boot, dm-spl   Dave Gerlach
• [PATCH 2/8] board: ti: am64x: Use fdt functions for ram and bank init   Dave Gerlach
• [PATCH 3/8] dt-bindings: memory-controller: Add information about ECC bindings   Dave Gerlach
• [PATCH 4/8] ram: k3-ddrss: Rename ddrss_ss_regs to ddrss_ctl_regs   Dave Gerlach
• [PATCH 5/8] ram: k3-ddrss: Introduce ECC Functionality for full memory space   Dave Gerlach
• [PATCH 6/8] board: ti: am64x: Account for DDR size fixups if ECC is enabled   Dave Gerlach
• [PATCH 7/8] arm: dts: k3-am64-ddr: Add ss_cfg reg entry   Dave Gerlach
• [PATCH 8/8] configs: am64x_evm_r5: Add CONFIG_NR_DRAM_BANKS as done in a53 defconfig   Dave Gerlach
• [PATCH 2/2] ram: k3-ddrss: Fix register definitions   Dave Gerlach
• [PATCH 1/2] ram: k3-ddrss: Fix register name and explain its usage   Dave Gerlach
• [PATCH] riscv: Fix build against binutils 2.38   Alexandre Ghiti
• [PATCH 0/8] tpm: Various minor fixes and enhancements   Simon Glass
• [PATCH 1/8] tpm: Export the TPM-version functions   Simon Glass
• [PATCH 2/8] tpm: Require a digest source when extending the PCR   Simon Glass
• [PATCH 3/8] tpm: Correct the permissions command in TPMv1   Simon Glass
• [PATCH 4/8] tpm: Correct the define-space command in TPMv2   Simon Glass
• [PATCH 5/8] tpm: sandbox: Allow init of TPM in a different phase   Simon Glass
• [PATCH 6/8] tpm: Allow reporting the internal state   Simon Glass
• [PATCH 7/8] tpm: Implement state command for Cr50   Simon Glass
• [PATCH 8/8] tpm: Allow commiting non-volatile data   Simon Glass
• [PATCH 06/14] misc: Add support for nvmem cells   Simon Glass
• [PATCH v4 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Simon Glass
• [PATCH] gpio: slg7xl45106: Add support for slg7xl45106 i2c gpo expander   Simon Glass
• [PATCH] led: led_pwm: Add a driver for LEDs connected to PWM   Simon Glass
• [PATCH 1/7] clk: Make rfree return void   Simon Glass
• [PATCH v3] binman: Include also subnodes in generator nodes   Simon Glass
• [PATCH v2] core: devres: optionally build devres into the SPL   Simon Glass
• [PATCH] spi: Add spi_get_bus_and_cs() new use_dt param   Simon Glass
• [PATCH v2 02/10] tpm: rng: Change tpm_get_random to return an int   Simon Glass
• [PATCH v2 07/10] tpm: rng: Move the TPM RNG functionality to driver model   Simon Glass
• [PATCH v2 01/10] tpm: Move tpm-utils header under the include directory   Simon Glass
• [PATCH v2 03/10] tpm: Fix the return type of tpm_startup   Simon Glass
• [PATCH v2 04/10] tpm: Move the TPM version detection functions to the uclass driver   Simon Glass
• [PATCH v2 06/10] configs: chromebook_coral: Build TPMV1 library routines   Simon Glass
• [PATCH v2 08/10] tpm: Add the RNG child device   Simon Glass
• [PATCH v2 10/10] cmd: rng: Add support for selecting RNG device   Simon Glass
• [PATCH v2 1/1] doc: describe generation of SMBIOS table   Simon Glass
• [PATCH] lib: rsa: use actual OpenSSL 1.1.0 EVP MD API   Simon Glass
• [PATCH v2 06/10] configs: chromebook_coral: Build TPMV1 library routines   Simon Glass
• [PATCH] patman: Define Commit.path in the constructor   Simon Glass
• [PATCH] patman: Define Commit.path in the constructor   Simon Glass
• [PATCH v2 12/12] rockchip: fix boot_devices constants   Simon Glass
• [PATCH v6 04/16] lib: allow to build asn1 decoder and oid registry in SPL   Simon Glass
• [PATCH v6 12/16] tools: binman: add support for pre-load header   Simon Glass
• [PATCH v6 13/16] configs: sandbox_defconfig: enable stage pre-load in bootm   Simon Glass
• [PATCH v6 14/16] test: py: vboot: add test for global image signature   Simon Glass
• [PATCH v6 15/16] cmd: verify: initial import   Simon Glass
• [PATCH v6 16/16] configs: sandbox_defconfig: enable config CMD_VERIFY   Simon Glass
• [PATCH v6 07/16] boot: image: add a stage pre-load   Simon Glass
• [PATCH v6 10/16] mkimage: add public key for image pre-load stage   Simon Glass
• [PATCH v6 11/16] Makefile: provide sah-key to binman   Simon Glass
• [PATCH v2 07/10] tpm: rng: Move the TPM RNG functionality to driver model   Simon Glass
• [PATCH v2 04/10] tpm: Move the TPM version detection functions to the uclass driver   Simon Glass
• [PATCH v2 08/10] tpm: Add the RNG child device   Simon Glass
• [PATCH v2 10/10] cmd: rng: Add support for selecting RNG device   Simon Glass
• [PATCH v2 06/10] configs: chromebook_coral: Build TPMV1 library routines   Simon Glass
• [PATCH v2 08/10] tpm: Add the RNG child device   Simon Glass
• [PATCH v2 07/10] tpm: rng: Move the TPM RNG functionality to driver model   Simon Glass
• [PATCH 1/2] x86: Add an enum name for the GNVS firmware type   Simon Glass
• [PATCH v2 00/13] event: Provide support for events to connect subsystems   Simon Glass
• [PATCH v2 01/13] phy: nop-phy: Fix phy reset if no reset-gpio defined   Simon Glass
• [PATCH v2 02/13] Makefile: Allow LTO to be disabled for a build   Simon Glass
• [PATCH v2 03/13] sandbox: start: Sort the header files   Simon Glass
• [PATCH v2 04/13] binman: Expand elf support a little   Simon Glass
• [PATCH v2 05/13] event: Add basic support for events   Simon Glass
• [PATCH v2 06/13] event: Add a simple test   Simon Glass
• [PATCH v2 07/13] event: Set up the event system on start-up   Simon Glass
• [PATCH v2 08/13] event: Add events for device probe/remove   Simon Glass
• [PATCH v2 09/13] event: Convert misc_init_f() to use events   Simon Glass
• [PATCH v2 10/13] event: Convert arch_cpu_init_dm() to use events   Simon Glass
• [PATCH v2 11/13] event: Add a command   Simon Glass
• [PATCH v2 12/13] event: Add a script to decode the event-spy list   Simon Glass
• [PATCH v2 13/13] event: Add documentation   Simon Glass
• [PATCH v2 08/10] tpm: Add the RNG child device   Simon Glass
• [PATCH v2] drivers: serial: Make sure we really return a serial device   Simon Glass
• [PATCH 03/24] spl: x86: Correct the binman symbols for SPL   Simon Glass
• [PATCH 06/24] dtoc: Support adding a string list to a device tree   Simon Glass
• [PATCH 20/24] binman: Support splitting an ELF file into multiple nodes   Simon Glass
• [PATCH v2 10/25] binman: Refactor fit to generate output at the end   Simon Glass
• [PATCH v2 12/25] binman: Change how faked blobs are created   Simon Glass
• [PATCH v2 13/25] binman: Make fake blobs zero-sized by default   Simon Glass
• [PATCH v2 14/25] binman: Allow mkimage to use a non-zero fake-blob size   Simon Glass
• [PATCH v2 15/25] binman: Read the fit entries only once   Simon Glass
• [PATCH v2 17/25] binman: Add a consistent way to report errors with fit   Simon Glass
• [PATCH v2 19/25] binman: Keep a separate list of entries for fit   Simon Glass
• [PATCH v2 20/25] binman: Support splitting an ELF file into multiple nodes   Simon Glass
• [PATCH v2 23/25] rockchip: Support building the all output files in binman   Simon Glass
• [PATCH v2] binman: support mkimage separate files   Simon Glass
• [PATCH v3 01/31] str: Move string tests to the string module   Simon Glass
• [PATCH v3 04/31] lib: Add a way to find the postiion of a trailing number   Simon Glass
• [PATCH v3 22/31] bootstd: Add an implementation of EFI boot   Simon Glass
• [PATCH v3 24/31] bootstd: Add an implementation of EFI bootmgr   Simon Glass
• [PATCH v3 00/31] Initial implementation of standard boot   Simon Glass
• [PATCH v3 00/26] binman: rockchip: Migrate from rockchip SPL_FIT_GENERATOR script   Simon Glass
• [PATCH v3 01/26] dtoc: Make GetArgs() more flexible   Simon Glass
• [PATCH v3 02/26] moveconfig: Remove remove_defconfig()   Simon Glass
• [PATCH v3 03/26] moveconfig: Use re.fullmatch() to avoid extra check   Simon Glass
• [PATCH v3 04/26] spl: Correct Kconfig help for TPL_BINMAN_SYMBOLS   Simon Glass
• [PATCH v3 05/26] dtoc: Tidy up implementation of AddStringList()   Simon Glass
• [PATCH v3 06/26] elf: Rename load_segments() and module failure   Simon Glass
• [PATCH v3 07/26] binman: Tweak collect_contents_to_file() and docs   Simon Glass
• [PATCH v3 08/26] binman: Rename ExpandToLimit to extend_to_limit   Simon Glass
• [PATCH v3 09/26] binman: Rename ExpandEntries to gen_entries   Simon Glass
• [PATCH v3 10/26] binman: Refactor fit to generate output at the end   Simon Glass
• [PATCH v3 11/26] binman: Rename tools parameter to btools   Simon Glass
• [PATCH v3 12/26] binman: Change how faked blobs are created   Simon Glass
• [PATCH v3 13/26] binman: Make fake blobs zero-sized by default   Simon Glass
• [PATCH v3 14/26] binman: Allow mkimage to use a non-zero fake-blob size   Simon Glass
• [PATCH v3 15/26] binman: Read the fit entries only once   Simon Glass
• [PATCH v3 16/26] binman: Update fit to move node reading into the ReadNode() method   Simon Glass
• [PATCH v3 17/26] binman: Fix some pylint warnings in fit   Simon Glass
• [PATCH v3 18/26] binman: Add a consistent way to report errors with fit   Simon Glass
• [PATCH v3 19/26] binman: Update fit to use node instead of subnode   Simon Glass
• [PATCH v3 20/26] binman: Keep a separate list of entries for fit   Simon Glass
• [PATCH v3 21/26] binman: Support splitting an ELF file into multiple nodes   Simon Glass
• [PATCH v3 22/26] rockchip: evb-rk3288: Drop raw-image support   Simon Glass
• [PATCH v3 23/26] rockchip: Include binman script in 64-bit boards   Simon Glass
• [PATCH v3 24/26] rockchip: Support building the all output files in binman   Simon Glass
• [PATCH v3 25/26] rockchip: Convert all boards to use binman   Simon Glass
• [PATCH v3 26/26] rockchip: Drop the FIT generator script   Simon Glass
• [PATCH v4 00/33] Initial implementation of standard boot   Simon Glass
• [PATCH v4 01/33] lib: Move string tests to the string module   Simon Glass
• [PATCH v4 02/33] test: Add tests for trailing_strtol()   Simon Glass
• [PATCH v4 03/33] lib: Correct comment formatting to avoid sphinx problems   Simon Glass
• [PATCH v4 04/33] lib: Fix a few bugs in trailing_strtoln()   Simon Glass
• [PATCH v4 05/33] lib: Add a way to find the postiion of a trailing number   Simon Glass
• [PATCH v4 06/33] dm: core: Rename and fix uclass_get_by_name_len()   Simon Glass
• [PATCH v4 07/33] dm: core: Allow finding a uclass device by partial name   Simon Glass
• [PATCH v4 08/33] test: fastboot: Avoid using mmc1   Simon Glass
• [PATCH v4 09/33] test: dm: Restart USB before assuming it is stopped   Simon Glass
• [PATCH v4 10/33] dm: blk: Add a function to return the device type   Simon Glass
• [PATCH v4 11/33] fs: Add a function to set the filesystem type   Simon Glass
• [PATCH v4 12/33] bootstd: Add the concept of a bootflow   Simon Glass
• [PATCH v4 13/33] bootstd: Add the bootstd uclass and core implementation   Simon Glass
• [PATCH v4 14/33] bootstd: Add the bootdev uclass   Simon Glass
• [PATCH v4 15/33] bootstd: Add the bootmeth uclass and helpers   Simon Glass
• [PATCH v4 16/33] bootstd: Add support for bootflows   Simon Glass
• [PATCH v4 17/33] bootstd: Add a bootdev command   Simon Glass
• [PATCH v4 19/33] bootstd: Add a bootmeth command   Simon Glass
• [PATCH v4 21/33] bootstd: mmc: Add a bootdev driver   Simon Glass
• [PATCH v4 22/33] bootstd: ethernet: Add a bootdev driver   Simon Glass
• [PATCH v4 23/33] bootstd: Add an implementation of distro PXE boot   Simon Glass
• [PATCH v4 24/33] bootstd: Add an implementation of EFI boot   Simon Glass
• [PATCH v4 25/33] bootstd: Add a system bootdev for strange boot methods   Simon Glass
• [PATCH v4 27/33] bootstd: Add a sandbox bootmeth driver   Simon Glass
• [PATCH v4 28/33] bootstd: sandbox: Add a hostfs bootdev   Simon Glass
• [PATCH v4 30/33] bootstd: usb: Add a bootdev driver   Simon Glass
• [PATCH v4 31/33] bootstd: Add tests for bootstd including all uclasses   Simon Glass
• [PATCH v4 32/33] bootstd: Add setup for the bootflow tests   Simon Glass
• [PATCH v4 33/33] bootstd: doc: Add documentation   Simon Glass
• [PATCH] WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO   Simon Glass
• [PATCH v3 00/31] Initial implementation of standard boot   Simon Glass
• [PATCH] WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO   Simon Glass
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_VIDEO   Simon Glass
• [PATCH] WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO   Simon Glass
• [PATCH v2 05/13] event: Add basic support for events   Simon Glass
• [PATCH v2 00/13] event: Provide support for events to connect subsystems   Simon Glass
• Porting U-Boot's UEFI Payload to coreboot   Simon Glass
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• [PATCH v3 3/8] tpm: rng: Add driver model interface for TPM RNG device   Simon Glass
• [PATCH v3 4/8] tpm: Add the RNG child device   Simon Glass
• [PATCH v3 5/8] qemu: arm: Remove platform specific function to get RNG device   Simon Glass
• [PATCH v3 6/8] cmd: rng: Add support for selecting RNG device   Simon Glass
• [PATCH v3 7/8] doc: rng: Add documentation for the rng command   Simon Glass
• [PATCH v3 8/8] test: rng: Add a UT testcase for the rng command   Simon Glass
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• [PATCH v3 6/8] cmd: rng: Add support for selecting RNG device   Simon Glass
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• No u-boot-rockchip pull request sent or merged for v2022.04   Simon Glass
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• [PATCH 0/5] Reduce size of a few boards   Simon Glass
• [PATCH 1/5] disk: Add an option for partitions in SPL   Simon Glass
• [PATCH 2/5] tbs2910: Disable ext4 write   Simon Glass
• [PATCH 3/5] rcar3_salvator-x: Drop EFI_LOADER   Simon Glass
• [PATCH 4/5] phycore-rk3288: Avoid enabling partition support in SPL   Simon Glass
• [PATCH 5/5] disk: Use a helper function to reduce duplication   Simon Glass
• [PATCH 1/2] env: Move the doc comment to the code   Simon Glass
• [PATCH 2/2] env: Drop the unncessary protocol mention in autoload   Simon Glass
• [RESEND RFC PATCH v2 2/4] lib/charset: add u16_strlcat() function   Simon Glass
• [RESEND RFC PATCH v2 3/4] test: unit test for u16_strlcat()   Simon Glass
• [PATCH][RFC] image: fdt: Fix DT relocation handling with multiple DRAM banks with gap   Simon Glass
• [PATCH] dm: core: Check flags before removing devices   Simon Glass
• [PATCH v2 23/41] bootstd: Add support for bootflows   Simon Glass
• two questions on verified boot   Simon Glass
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Simon Glass
• [PATCH 2/5] tbs2910: Disable ext4 write   Simon Glass
• [PATCH 3/5] rcar3_salvator-x: Drop EFI_LOADER   Simon Glass
• [PATCH v3 12/12] rockchip: fix boot_devices constants   Simon Glass
• [PATCH v10 7/9] doc: Improve environment documentation further   Simon Glass
• [PATCH] fit: display proper node on error   Simon Glass
• [PATCH 2/2] configs: rock-pi-4: Enable OP-TEE secure os support   Simon Glass
• [PATCH v1 01/11] clk: rockchip: rk3568: fix reset handler   Simon Glass
• [PATCH v1 06/11] rockchip: handle bootrom recovery mode in spl   Simon Glass
• [PATCH v1 07/11] rockchip: rk3568: add boot device detection   Simon Glass
• [PATCH v1 08/11] rockchip: rk3568: enable automatic clock gating   Simon Glass
• [PATCH v1 09/11] rockchip: move dwc3 config to chip specific handler   Simon Glass
• [PATCH v1 10/11] rockchip: rk3568: add dwc3 otg support   Simon Glass
• [PATCH v1 11/11] [RFC] rockchip: rk356x: attempt to fix ram detection   Simon Glass
• [PATCH] console: Implement flush() function   Simon Glass
• [PATCH 2/2] bootcount: Add pmic pfuze100 bootcount driver   Simon Glass
• [PATCH V2] Makefile: Sort u-boot-initial-env output   Simon Glass
• [PATCH 1/2] Split CONFIG_CC_OPTIMIZE_FOR_SIZE into two configs   Simon Glass
• [PATCH 2/2] Add option to use -Og   Simon Glass
• [PATCH] lib/acpi: Enable QEMU special cases for ARM   Simon Glass
• [PATCH] qfw: Do not include tables.h on arm   Simon Glass
• [PATCH] qfw: Allocate ACPI memory using efi logic   Simon Glass
• [PATCH 1/4] qfw: Add WRITE definition   Simon Glass
• [PATCH 2/4] ramfb: Add driver for ramfb display   Simon Glass
• [PATCH 14/18] Make ASYMMETRIC_KEY_TYPE depend on FIT_SIGNATURE   Simon Glass
• [PATCH 06/14] misc: Add support for nvmem cells   Simon Glass
• [PATCH v2 12/12] rockchip: fix boot_devices constants   Simon Glass
• [PATCH V3] Makefile: Sort u-boot-initial-env output   Simon Glass
• [PATCH v2 1/2] video: Allow drivers to allocate the frame buffer themselves   Simon Glass
• [PATCH v2 08/10] tpm: Add the RNG child device   Simon Glass
• [PATCH 1/3] pwm: Add Aspeed ast2600 PWM support   Simon Glass
• [PATCH 2/3] pinctrl: Add the pinctrl setting for PWM.   Simon Glass
• [PATCH 3/3] ARM: dts: ast2600: Add PWM to device tree   Simon Glass
• [PATCH v1 1/1] wdt: nuvoton: Add support for Nuvoton   Simon Glass
• [PATCH v3 8/8] test: rng: Add a UT testcase for the rng command   Simon Glass
• [PATCH 1/3] lib: rsa: Fix const-correctness of rsassa_pss functions   Simon Glass
• [PATCH 3/3] lib: rsa: Update function padding_pss_verify (any-salt)   Simon Glass
• [PATCH 2/3] lib: rsa: Leverage existing data buffer instead of systematic copy   Simon Glass
• [PATCH v4 3/8] tpm: rng: Add driver model interface for TPM RNG device   Simon Glass
• [PATCH v4 4/8] tpm: Add the RNG child device   Simon Glass
• [PATCH 2/5] tbs2910: Disable ext4 write   Simon Glass
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• [PATCH][RFC] image: fdt: Fix DT relocation handling with multiple DRAM banks with gap   Simon Glass
• [PATCH] video: sandbox: fix missing shim definition of sandbox_sdl_remove_display()   Simon Glass
• [PATCH] WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO   Simon Glass
• [PATCH v2 12/25] binman: Change how faked blobs are created   Simon Glass
• [PATCH v2 14/25] binman: Allow mkimage to use a non-zero fake-blob size   Simon Glass
• [PATCH v3 22/26] rockchip: evb-rk3288: Drop raw-image support   Simon Glass
• [PATCH v2 26/28] serial: dm: Add support for puts   Simon Glass
• [PATCH v1 01/11] clk: rockchip: rk3568: fix reset handler   Simon Glass
• [PATCH v1 11/11] [RFC] rockchip: rk356x: attempt to fix ram detection   Simon Glass
• [PATCH v2 1/1] cmd: add serial console support for the cls command   Simon Glass
• [PATCH 2/5] tbs2910: Disable ext4 write   Simon Glass
• [PATCH] env: Avoid using a leftover text-environment file   Simon Glass
• [BUG] include/generated/environment.h included incorrectly   Simon Glass
• [PATCH v2 02/13] Makefile: Allow LTO to be disabled for a build   Simon Glass
• [PATCH v4 13/33] bootstd: Add the bootstd uclass and core implementation   Simon Glass
• [PATCH 1/1] doc: add libgnutls28-dev to build dependencies   Simon Glass
• [PATCH v2 26/28] serial: dm: Add support for puts   Simon Glass
• [PATCH v3 24/31] bootstd: Add an implementation of EFI bootmgr   Simon Glass
• [PATCH v2 1/1] cmd: add serial console support for the cls command   Simon Glass
• Porting U-Boot's UEFI Payload to coreboot   Simon Glass
• [PATCH v3 3/8] tpm: rng: Add driver model interface for TPM RNG device   Simon Glass
• [PATCH v3 6/8] cmd: rng: Add support for selecting RNG device   Simon Glass
• [PATCH v3 21/26] binman: Support splitting an ELF file into multiple nodes   Simon Glass
• [PATCH v10 3/9] env: Allow U-Boot scripts to be placed in a .env file   Simon Glass
• [PATCH] env: Allow text-env tests to run with awk   Simon Glass
• [PATCH v2 1/2] x86: Add an enum name for the GNVS firmware type   Simon Glass
• [PATCH v2 2/2] x86: Correct the coreboot header file in MAINTAINERS   Simon Glass
• [PATCH v11 2/9] tools: mkeficapsule: add firmware image signing   Simon Glass
• [PATCH] bloblist: Describe the design goals   Simon Glass
• [PATCH 1/8] video: Add cursor support for DM_VIDEO consoles   Simon Glass
• [PATCH 8/8] video: Convert UTF-8 input stream to the 437 code page   Simon Glass
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Simon Glass
• [PATCH v4 00/33] Initial implementation of standard boot   Simon Glass
• [PATCH v3 8/8] test: rng: Add a UT testcase for the rng command   Simon Glass
• [PATCH v3 1/6] rockchip: move ROCKCHIP_STIMER_BASE to Kconfig   Simon Glass
• [PATCH v5 4/9] tpm: Add the RNG child device   Simon Glass
• [PATCH v5 3/9] tpm: rng: Add driver model interface for TPM RNG device   Simon Glass
• [PATCH v5 6/9] cmd: rng: Add support for selecting RNG device   Simon Glass
• [PATCH v5 7/9] cmd: rng: Use a statically allocated array for random bytes   Simon Glass
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Simon Glass
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Simon Glass
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• [PATCH 1/2] board: tbs2910: Enable Link Time Optimizations in defconfig   Simon Glass
• [PATCH 2/2] board: tbs2910: Convert to DM_SERIAL   Simon Glass
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Simon Glass
• [PATCH] lib/acpi: Enable QEMU special cases for ARM   Simon Glass
• [PATCH] doc: board: raspberrypi: Add documentation   Simon Glass
• [PATCH 1/5] disk: Add an option for partitions in SPL   Simon Glass
• [PATCH v2 02/13] Makefile: Allow LTO to be disabled for a build   Simon Glass
• [PATCH 3/5] rcar3_salvator-x: Drop EFI_LOADER   Simon Glass
• [PATCH v5 7/9] cmd: rng: Use a statically allocated array for random bytes   Simon Glass
• [PATCH v5 4/9] tpm: Add the RNG child device   Simon Glass
• [PATCH v5 3/9] tpm: rng: Add driver model interface for TPM RNG device   Simon Glass
• [PATCH v2 02/13] Makefile: Allow LTO to be disabled for a build   Simon Glass
• [PATCH 1/5] disk: Add an option for partitions in SPL   Simon Glass
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Simon Glass
• [PATCH 2/2] board: tbs2910: Convert to DM_SERIAL   Simon Glass
• [PATCH v2 02/13] Makefile: Allow LTO to be disabled for a build   Simon Glass
• [PATCH v2 02/13] Makefile: Allow LTO to be disabled for a build   Simon Glass
• [PATCH v3 3/4] rockchip: bob: Enable more configs   Simon Glass
• [PATCH v2 12/25] binman: Change how faked blobs are created   Simon Glass
• [PATCH v3 1/4] rockchip: gru: Set up SoC IO domain registers   Simon Glass
• [PATCH 2/2] board: tbs2910: Convert to DM_SERIAL   Simon Glass
• [PATCH 2/2] board: tbs2910: Convert to DM_SERIAL   Simon Glass
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Simon Glass
• [PATCH] dm: Add docs to explain how to enable DM_SERIAL for a board   Simon Glass
• [PATCH] efi_loader: Use sysreset instead of reset command   Simon Glass
• [PATCH] efi_loader: Use sysreset instead of reset command   Simon Glass
• [PATCH v2 02/13] Makefile: Allow LTO to be disabled for a build   Simon Glass
• [PATCH] dm: Add docs to explain how to enable DM_SERIAL for a board   Simon Glass
• [PATCH] efi_loader: Use sysreset instead of reset command   Simon Glass
• [PATCH v5 4/9] tpm: Add the RNG child device   Simon Glass
• [PATCH] dm: Add docs to explain how to enable DM_SERIAL for a board   Simon Glass
• [PATCH v2] dm: Add docs to explain how to enable DM_SERIAL for a board   Simon Glass
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Simon Glass
• [PATCH 3/4] Revert "efi: Allow easy selection of serial-only operation"   Simon Glass
• [PATCH v4] wdt: nuvoton: Add support for Nuvoton   Simon Glass
• [PATCH 1/7] clk: Make rfree return void   Simon Glass
• [PATCH v2] efi_loader: Use sysreset instead of reset command   Simon Glass
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Simon Glass
• [PATCH 7/9] include: Upgrade <linux/typecheck.h>   Simon Glass
• [PATCH 5/9] include: Import <linux/bits.h> & Update bitops.h   Simon Glass
• [PATCH 6/9] include: Carve <linux/export.h> out of compat.h   Simon Glass
• [PATCH 2/9] lib: crypt: Avoid redefining static_assert   Simon Glass
• [PATCH 3/9] scripts: Makefile.lib: Pass __UBOOT__ to DTC's CPP   Simon Glass
• [PATCH 4/9] linux/const.h: Upgrade & Merge vDSO and uAPI   Simon Glass
• [PATCH] boot: image: fixup zstd decompression buffer initialization typo   Simon Glass
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Simon Glass
• [PATCH v3 22/26] rockchip: evb-rk3288: Drop raw-image support   Simon Glass
• [PATCH v2] core: devres: optionally build devres into the SPL   Simon Glass
• [PATCH] binman: Complete elf test coverage   Simon Glass
• [PATCH v3 05/26] dtoc: Tidy up implementation of AddStringList()   Simon Glass
• [PATCH] dtoc: Update fdt tests to use test_util   Simon Glass
• [PATCH v2] binman: Complete elf test coverage   Simon Glass
• Please pull u-boot-dm/next   Simon Glass
• [PATCH] Makefile: add drivers/video/u_boot_logo.S to clean   Simon Glass
• [PATCH v2 1/3] Add valgrind headers to U-Boot   Simon Glass
• [PATCH] gpio: pca953x_gpio: add PCA957X support   Simon Glass
• [PATCH] mmc: rockchip_sdhci: Correct error checking   Simon Glass
• [PATCH] arm: apple: Fix mem layout   Simon Glass
• [PATCH] arm: apple: Increase RTKit timeout   Simon Glass
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Simon Glass
• [PATCH v4 00/33] Initial implementation of standard boot   Simon Glass
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Simon Glass
• [PATCH] arm: apple: Fix mem layout   Simon Glass
• [PATCH] sandbox: sdl: Add stub sandbox_sdl_remove_display()   Simon Glass
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Simon Glass
• [PATCH] power-domain: Fix use of uninitialized value in dev_power_domain_ctrl   Simon Glass
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Simon Glass
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Simon Glass
• [PATCH v4 00/33] Initial implementation of standard boot   Simon Glass
• [PATCH v4 00/33] Initial implementation of standard boot   Simon Glass
• [PATCH] sandbox: usb: Fix out-of-bounds read when fd=-1   Simon Glass
• [PATCH v4 00/33] Initial implementation of standard boot   Simon Glass
• [PATCH 00/14] video: Drop old CFB code   Simon Glass
• [PATCH v4 00/33] Initial implementation of standard boot   Simon Glass
• [PATCH 00/14] video: Drop old CFB code   Simon Glass
• [PATCH 00/14] video: Drop old CFB code   Simon Glass
• [PATCH v4 00/33] Initial implementation of standard boot   Simon Glass
• [PATCH v4 00/33] Initial implementation of standard boot   Simon Glass
• [PATCH 00/10] dm: Experiments for reducing SPL memory usage   Simon Glass
• [PATCH 01/10] Makefile: v2 Allow LTO to be disabled for a build   Simon Glass
• [PATCH 02/10] sandbox: Correct loss of early output in SPL   Simon Glass
• [PATCH 03/10] Makefile: Drop a stale comment about linking   Simon Glass
• [PATCH 04/10] Makefile: Avoid resetting link flags in config.mk   Simon Glass
• [PATCH 05/10] sandbox: Allow link flags to be given   Simon Glass
• [PATCH 06/10] sandbox: Align linker lists to a 32-byte boundary   Simon Glass
• [PATCH 07/10] dm: core: Allow devres to be disabled in SPL   Simon Glass
• [PATCH 08/10] dm: core: Deal with a wrinkle with linker lists   Simon Glass
• [PATCH 09/10] RFC: dm: add tag support   Simon Glass
• [PATCH 10/10] WIP: dm: core: Add a command to calculate memory usage   Simon Glass
• [PATCH u-boot-net 03/14] net: introduce helpers to get PHY ofnode from MAC   Simon Glass
• [PATCH v2] pinctrl: nuvoton: Add NPCM8xx pinctrl driver   Simon Glass
• [PATCH v3 12/12] rockchip: fix boot_devices constants   Simon Glass
• [PATCH v2] core: devres: optionally build devres into the SPL   Simon Glass
• [PATCH 4/9] linux/const.h: Upgrade & Merge vDSO and uAPI   Simon Glass
• [PATCH 7/9] include: Upgrade <linux/typecheck.h>   Simon Glass
• [PATCH v5 4/9] tpm: Add the RNG child device   Simon Glass
• [PATCH v6 15/16] cmd: verify: initial import   Simon Glass
• [PATCH 19/23] video: Support showing the U-Boot logo   Simon Glass
• [PATCH v2 7/9] Make EFI_LOADER depend on DM and OF_CONTROL   Simon Glass
• Un-clean scripts/dtc causing buildman failure   Simon Glass
• [PATCH v3 16/29] serial: Add semihosting driver   Simon Glass
• [PATCH v3 26/29] serial: dm: Add support for puts   Simon Glass
• [PATCH v3 27/29] serial: sandbox: Implement puts   Simon Glass
• [PATCH v3 28/29] test: serial: Add test for putc/puts   Simon Glass
• [PATCH] image: fit: Align hash output buffers   Simon Glass
• [PATCH 2/6] image: fit: Add some helpers for getting data   Simon Glass
• [PATCH 3/6] misc: fs_loader: Add function to get the chosen loader   Simon Glass
• [PATCH v3 16/29] serial: Add semihosting driver   Simon Glass
• [PATCH v2 1/4] misc: k3_esm: Add functionality to set and route error events within K3SoC   Christian Gmeiner
• [PATCH v2 3/4] arch: arm: mach-k3: am642_init: Probe ESM nodes   Christian Gmeiner
• [PATCH v2 2/4] arm: dts: k3-am64: Add support for ESM device nodes   Christian Gmeiner
• [PATCH v2 4/4] configs: am64x_evm_r5_defconfig: Add support for ESM   Christian Gmeiner
• [PATCH v2] arm: mach-k3: am6_init: Use CONFIG_TI_I2C_BOARD_DETECT   Christian Gmeiner
• [PATCH v2 3/4] arch: arm: mach-k3: am642_init: Probe ESM nodes   Christian Gmeiner
• [PATCH v2 3/4] arch: arm: mach-k3: am642_init: Probe ESM nodes   Christian Gmeiner
• [PATCH v3 1/4] misc: k3_esm: Add functionality to set and route error events within K3SoC   Christian Gmeiner
• [PATCH v3 2/4] arm: dts: k3-am64: Add support for ESM device nodes   Christian Gmeiner
• [PATCH v3 3/4] arch: arm: mach-k3: am642_init: Probe ESM nodes   Christian Gmeiner
• [PATCH v3 4/4] configs: am64x_evm_r5_defconfig: Add support for ESM   Christian Gmeiner
• [PATCH 1/2] ram: k3-am654: Write all configuration values   Christian Gmeiner
• [PATCH 2/2] ram: k3-am654: Make VTT regulator optional   Christian Gmeiner
• [PATCH] image-fdt: save name of FIT configuration in '/chosen' node   Daniel Golle
• [PATCH] image-fdt: save name of FIT configuration in '/chosen' node   Daniel Golle
• [PATCH] image-fdt: save name of FIT configuration in '/chosen' node   Daniel Golle
• [PATCH 0/2] J721E: Fix DFU in U-Boot   Aswath Govindraju
• [PATCH 1/2] phy: cadence: Sierra: Move the link operations from serdes phy to link device   Aswath Govindraju
• [PATCH 2/2] board: ti: j721e: evm.c: Fix the probing of in Sierra SerDes0   Aswath Govindraju
• [PATCH] doc: mmc dev   Aswath Govindraju
• [PATCH] usb: dwc2: handle return code of dev_read_size() in of to plat function   Wolfgang Grandegger
• [PATCH v2] usb: dwc2: handle return code of dev_read_size() in of to, plat function   Wolfgang Grandegger
• [PATCH] usb: dwc2: handle return code of dev_read_size() in of to plat function   Wolfgang Grandegger
• [PATCH v3] usb: dwc2: handle return code of dev_read_size() in of to, plat function   Wolfgang Grandegger
• [PATCH v2] usb: dwc2: handle return code of dev_read_size() in of to, plat function   Wolfgang Grandegger
• ARM: socfpga: gen5: release reset before using USB as device with ums   Wolfgang Grandegger
• [PATCH 1/1] arm: apple: Add M1 Ultra support   Janne Grunau
• [PATCH] WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO   Anatolij Gustschin
• Please pull u-boot-video   Anatolij Gustschin
• [PATCH 1/1] video: mxsfb: fix pixel clock polarity   Anatolij Gustschin
• [PATCH v2 1/2] video: Allow drivers to allocate the frame buffer themselves   Anatolij Gustschin
• [PATCH v2 2/2] Nokia RX-51: Convert to CONFIG_DM_VIDEO   Anatolij Gustschin
• [PATCH 1/1] video: bmp: Support x2r10g10b10 pixel format   Anatolij Gustschin
• Please pull u-boot-video   Anatolij Gustschin
• Please pull u-boot-video   Anatolij Gustschin
• [PATCH 00/14] video: Drop old CFB code   Anatolij Gustschin
• [PATCH 00/14] video: Drop old CFB code   Anatolij Gustschin
• Please pull u-boot-video/next   Anatolij Gustschin
• [PATCH 00/14] video: Drop old CFB code   Anatolij Gustschin
• [PATCH] drivers: led: bcm6858: Set default brightness when setting LED state   Paul HENRYS
• [PATCH v2] drivers: led: bcm6858: Set a default brightness when probing LEDs   Paul HENRYS
• [PATCH] phy: nop-phy: Fix phy reset if no reset-gpio defined   Tim Harvey
• gpio_request_by_name for GPIOD_IS_OUT drives GPIO before specifically instructed to   Tim Harvey
• gpio_request_by_name for GPIOD_IS_OUT drives GPIO before specifically instructed to   Tim Harvey
• gpio_request_by_name for GPIOD_IS_OUT drives GPIO before specifically instructed to   Tim Harvey
• [PATCH 0/2] prevent undesired de-assertion of phy-reset   Tim Harvey
• [PATCH 1/2] net: fec: prevent undesired de-assertion of phy-reset on request   Tim Harvey
• [PATCH 2/2] net: eth-phy: prevent undesired de-assertion of phy-reset on request   Tim Harvey
• [PATCH] driver: gpio: fix gpio glitch for output-high gpio-hog   Tim Harvey
• [PATCH] driver: gpio: fix gpio glitch for output-high gpio-hog   Tim Harvey
• phy_connect_dev calling phy_reset???   Tim Harvey
• phy_connect_dev calling phy_reset???   Tim Harvey
• [PATCH 0/7] Add Gateworks System Controller driver   Tim Harvey
• [PATCH 1/7] board: gateworks: gw_ventana: convert to DM_I2C   Tim Harvey
• [PATCH 2/7] board: gateworks: gw_ventana: move SPL uart config out of common   Tim Harvey
• [PATCH 3/7] board: gateworks: gw_ventana: move GPIO config out of common   Tim Harvey
• [PATCH 4/7] board: gateworks: gw_ventana: move ft_early_fixups out of common   Tim Harvey
• [PATCH 5/7] drivers: misc: add Gateworks System Controller driver   Tim Harvey
• [PATCH 6/7] board: gateworks: gw_ventana: use comomn GSC driver   Tim Harvey
• [PATCH 7/7] board: gateworks: venice: use common GSC driver   Tim Harvey
• [PATCH] arm: dts: imx8m*-venice: add gpio hog support   Tim Harvey
• [PATCH] imx8m{m,n}-venice-gw7902: add GSC ADC rail for VDD_5P0   Tim Harvey
• [PATCH] board: venice: add spl_board_loader_name   Tim Harvey
• [PATCH] board: gateworks venice: add support for GPY111 phy   Tim Harvey
• [PATCH] imx8m{m,n}_venice_defconfig: add DT overlay support   Tim Harvey
• [PATCH] imx8m{m,n}_venice: update env memory layout   Tim Harvey
• dsa driver for mv88e61xx   Tim Harvey
• dsa driver for mv88e61xx   Tim Harvey
• dsa driver for mv88e61xx   Tim Harvey
• [PATCH 19/23] video: Support showing the U-Boot logo   Tim Harvey
• GPMI NAND Regression on i.MX6S   Tim Harvey
• [PATCH 2/5] imx8mm-cl-iot-gate: Retrieve the DDR type from EEPROM   Tim Harvey
• [EXT] [PATCH] mtd: mxs_nand: default to legacy bch and rename to modern bch option   Tim Harvey
• [EXT] [PATCH] mtd: mxs_nand: default to legacy bch and rename to modern bch option   Tim Harvey
• [EXT] [PATCH] mtd: mxs_nand: default to legacy bch and rename to modern bch option   Tim Harvey
• [PATCH] imx: ventana: enable ONFI detection to fix NAND chip configuration   Tim Harvey
• [PATCH] mtd: gpmi: fix the gpmi bch setting unalignment issue   Tim Harvey
• imx8mp EQoS "EQOS_DMA_MODE_SWR stuck"   Tim Harvey
• imx8mp EQoS "EQOS_DMA_MODE_SWR stuck"   Tim Harvey
• [PATCH 0/7] Add Gateworks System Controller driver   Tim Harvey
• [PATCH] board: gw_ventana: gsc: fix GSC read/write functions   Tim Harvey
• [PATCH] board: gw_ventana: gsc: fix GSC read/write functions   Tim Harvey
• [PATCH 1/2] net: dsa: fix phydev->speed being uninitialized for the CPU port fixed PHY   Tim Harvey
• [PATCH 1/2] net: dsa: fix phydev->speed being uninitialized for the CPU port fixed PHY   Tim Harvey
• [PATCH] imx: ventana: enable ONFI detection to fix NAND chip configuration   Tim Harvey
• [PATCH 19/23] video: Support showing the U-Boot logo   Tim Harvey
• [PATCH] board: gw_ventana: gsc: fix GSC read/write functions   Tim Harvey
• [PATCH] video: Do not show splash and U-Boot logo simultaneously   Tim Harvey
• [PATCH 1/2] net: dsa: fix phydev->speed being uninitialized for the CPU port fixed PHY   Tim Harvey
• [PATCH] board: gw_ventana: gsc: fix GSC read/write functions   Tim Harvey
• [PATCH] mtd: nand: mxs_nand_spl: Remove the page aligned access   Tim Harvey
• [PATCH 1/2] net: dsa: fix phydev->speed being uninitialized for the CPU port fixed PHY   Tim Harvey
• [PATCH 0/6] Add MV88E61xx DSA driver and use on gwventana   Tim Harvey
• [PATCH 1/6] net: mdio-uclass: scan for dm mdio children on post-bind   Tim Harvey
• [PATCH 2/6] net: dsa: move cpu port probe to dsa_post_probe   Tim Harvey
• [PATCH 3/6] net: mdio-uclass: add wrappers for read/write/reset operations   Tim Harvey
• [PATCH 4/6] net: fec: add support for DM_MDIO   Tim Harvey
• [PATCH 5/6] net: add MV88E61xx DSA driver   Tim Harvey
• [PATCH 6/6] board: gw_ventana: enable MV88E61XX DSA support   Tim Harvey
• [PATCH 5/6] net: add MV88E61xx DSA driver   Tim Harvey
• [PATCH 0/6] Add MV88E61xx DSA driver and use on gwventana   Tim Harvey
• [PATCH v2] board: gateworks: venice: determine dram size at runtime   Tim Harvey
• [PATCH] imx8m{m,n}-venice-gw7902: add support for GPY111 phy   Tim Harvey
• [PATCH v2] board: gateworks: venice: determine dram size at runtime   Tim Harvey
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Tim Harvey
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Tim Harvey
• [PATCH 4/6] net: fec: add support for DM_MDIO   Tim Harvey
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Tim Harvey
• [PATCH] mmc: dw_mmc: set host_caps mmc modes to equivalent and lower buswidth   Jan Havran
• [PATCH] dt-bindings: mtd: partitions: add UBI binding   Rob Herring
• [PATCH V3] dt-bindings: nvmem: add U-Boot environment variables binding   Rob Herring
• [PATCH V3] dt-bindings: nvmem: add U-Boot environment variables binding   Rob Herring
• [PATCH V3] dt-bindings: nvmem: add U-Boot environment variables binding   Rob Herring
• [PATCH 1/2] net: fec: prevent undesired de-assertion of phy-reset on request   Joe Hershberger
• [PATCH 2/2] net: eth-phy: prevent undesired de-assertion of phy-reset on request   Joe Hershberger
• [PATCH v4 2/2] efi_loader: Reset system after CapsuleUpdate on disk   Masami Hiramatsu
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Masami Hiramatsu
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Masami Hiramatsu
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Masami Hiramatsu
• [PATCH] efi_loader: Use sysreset instead of reset command   Masami Hiramatsu
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Masami Hiramatsu
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Masami Hiramatsu
• [PATCH] efi_loader: Use sysreset instead of reset command   Masami Hiramatsu
• [PATCH v2] efi_loader: Use sysreset instead of reset command   Masami Hiramatsu
• [PATCH v2] efi_loader: Use sysreset instead of reset command   Masami Hiramatsu
• [PATCH v3 0/3] EFI: Use sysreset instead of reset command   Masami Hiramatsu
• [PATCH v3 1/3] cmd: efidebug: Disable 'capsule disk-update' when CONFIG_EFI_CAPSULE_ON_DISK=n   Masami Hiramatsu
• [PATCH v3 2/3] efi_loader: Make efi_load_capsule_drivers() available even if EFI_CAPSULE_ON_DISK=n   Masami Hiramatsu
• [PATCH v3 3/3] efi_loader: Use sysreset instead of reset command   Masami Hiramatsu
• [RFC PATCH 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Masami Hiramatsu
• [RFC PATCH 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Masami Hiramatsu
• [RFC PATCH 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Masami Hiramatsu
• [RFC PATCH 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Masami Hiramatsu
• [RFC PATCH 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Masami Hiramatsu
• [PATCH v3 4/9] board: Define set_dfu_alt_info() for boards with UEFI capsule update enabled   Masami Hiramatsu
• [PATCH v3 5/9] capsule: kconfig: Select SET_DFU_ALT_INFO config symbol for capsule update   Masami Hiramatsu
• [PATCH v3 3/9] capsule: Put a check for image index before the update   Masami Hiramatsu
• [PATCH v3 2/9] capsule: FMP: Populate the image descriptor array from platform data   Masami Hiramatsu
• [PATCH v3 1/9] capsule: Add Image GUIDs and image index for platforms using capsule updates   Masami Hiramatsu
• [PATCH v3 9/9] doc: uefi: Update the capsule update related documentation   Masami Hiramatsu
• [PATCH v3 5/9] capsule: kconfig: Select SET_DFU_ALT_INFO config symbol for capsule update   Masami Hiramatsu
• [PATCH v4 4/8] board: Define set_dfu_alt_info() for boards with UEFI capsule update enabled   Masami Hiramatsu
• [PATCH 02/15] arm: sunxi: Remove most SoC-specific config header files   Samuel Holland
• [PATCH v2 00/23] sunxi: Add and use a pinctrl driver   Samuel Holland
• [PATCH v2 01/23] sunxi: pinctrl: Create the driver skeleton   Samuel Holland
• [PATCH v2 02/23] sunxi: pinctrl: Implement pin muxing functions   Samuel Holland
• [PATCH v2 03/23] sunxi: pinctrl: Implement get_pin_muxing function   Samuel Holland
• [PATCH v2 04/23] sunxi: pinctrl: Implement pin configuration   Samuel Holland
• [PATCH v2 05/23] pinctrl: sunxi: Add UART pinmuxes   Samuel Holland
• [PATCH v2 06/23] sunxi: Skip non-DM UART pin setup when PINCTRL=y   Samuel Holland
• [PATCH v2 07/23] pinctrl: sunxi: Add sun4i EMAC pinmuxes   Samuel Holland
• [PATCH v2 08/23] net: sunxi_emac: Remove non-DM pin setup   Samuel Holland
• [PATCH v2 09/23] pinctrl: sunxi: Add sunxi GMAC pinmuxes   Samuel Holland
• [PATCH v2 10/23] sunxi: Remove non-DM GMAC pin setup   Samuel Holland
• [PATCH v2 11/23] pinctrl: sunxi: Add sun8i EMAC pinmuxes   Samuel Holland
• [PATCH v2 12/23] net: sun8i_emac: Remove non-DM pin setup   Samuel Holland
• [PATCH v2 13/23] pinctrl: sunxi: Add I2C pinmuxes   Samuel Holland
• [PATCH v2 14/23] sunxi: Remove options and setup code for I2C2-I2C4   Samuel Holland
• [PATCH v2 15/23] sunxi: Remove non-DM I2C clock/pin setup from U-Boot   Samuel Holland
• [PATCH v2 16/23] i2c: sun6i_p2wi: Only do non-DM pin setup for non-DM I2C   Samuel Holland
• [PATCH v2 17/23] i2c: sun8i_rsb: Only do non-DM pin setup for non-DM I2C   Samuel Holland
• [PATCH v2 18/23] pinctrl: sunxi: Add MMC pinmuxes   Samuel Holland
• [PATCH v2 19/23] sunxi: Remove non-DM MMC pin setup   Samuel Holland
• [PATCH v2 20/23] pinctrl: sunxi: Add the A64 PWM pinmux   Samuel Holland
• [PATCH v2 21/23] pwm: sunxi: Remove non-DM pin setup   Samuel Holland
• [PATCH v2 22/23] pinctrl: sunxi: Add SPI0 pinmuxes   Samuel Holland
• [PATCH v2 23/23] spi: sun4i_spi: Remove non-DM pin setup   Samuel Holland
• [PATCH 0/4] sunxi: Fixes for DM I2C drivers   Samuel Holland
• [PATCH 1/4] i2c: sun6i_p2wi: Initialize chips in .child_pre_probe   Samuel Holland
• [PATCH 2/4] i2c: sun6i_p2wi: Add support for DM clocks and resets   Samuel Holland
• [PATCH 3/4] i2c: sun8i_rsb: Initialize chips in .child_pre_probe   Samuel Holland
• [PATCH 4/4] i2c: sun8i_rsb: Add support for DM clocks and resets   Samuel Holland
• [PATCH v5 0/3] sunxi: TOC0 image type support   Samuel Holland
• [PATCH v5 1/3] tools: mkimage: Add Allwinner TOC0 support   Samuel Holland
• [PATCH v5 2/3] sunxi: Support SPL in both eGON and TOC0 images   Samuel Holland
• [PATCH v5 3/3] sunxi: Support building a SPL as a TOC0 image   Samuel Holland
• [PATCH 2/2] sunxi: dts: Update RGMII phy-mode properties   Samuel Holland
• [PATCH] fdt: Add -q option to fdt addr for distro_bootcmd   Peter Hoyes
• [PATCH 1/2] ARM: dts: at91: rename sama7g5ek.dts to at91-sama7g5ek.dts   Eugen Hristev
• [PATCH 2/2] ARM: dts: at91: sama7g5/sama7g5ek: align with Linux DT   Eugen Hristev
• [PATCH] board: at91: sama5d2: set blue led on at boot time   Eugen Hristev
• [PATCH v2 1/2] ARM: dts: at91: rename sama7g5ek.dts to at91-sama7g5ek.dts   Eugen Hristev
• [PATCH v2 2/2] ARM: dts: at91: sama7g5/sama7g5ek: align with Linux DT   Eugen Hristev
• [PATCH v3 1/2] ARM: dts: at91: rename sama7g5ek.dts to at91-sama7g5ek.dts   Eugen Hristev
• [PATCH v3 2/2] ARM: dts: at91: sama7g5/sama7g5ek: align with Linux DT   Eugen Hristev
• [PATCH-next] include: configs: at91/sam: remove stray #ifdef/#else   Eugen Hristev
• [RFC PATCH] mips: dts: add initial support for ls1c300 SoC   Du Huanpeng
• [PATCH] Makefile: add endian link flag to u-boot-elf.o   Du Huanpeng
• Porting U-Boot's UEFI Payload to coreboot   Ahamed Husni
• Porting U-Boot's UEFI Payload to coreboot   Ahamed Husni
• riscv64 - SiFive Unmatched regression?   Alexander von Gluck IV
• [PATCH] efi_loader: Expose relocated address for gdb debugging purposes   Alexander von Gluck IV
• [RFC] Dumping load addresses - bootefi qemu gdb remote debugging   Alexander von Gluck IV
• [PATCH] efi_loader: Expose relocated address for gdb debugging purposes   Alexander von Gluck IV
• [PATCH] efi_loader (v2): Expose relocated address for gdb debugging purposes   Alexander von Gluck IV
• [PATCH 2/9] lib: crypt: Avoid redefining static_assert   Steffen Jaeckel
• [PATCH v7 0/4] Add octal DTR support for Macronix flash   JaimeLiao
• [PATCH v7 1/4] mtd: spi-nor: add support for Macronix Octal flash   JaimeLiao
• [PATCH v7 2/4] mtd: spi-nor-core: Adding different type of command extension in Soft Reset   JaimeLiao
• [PATCH v7 3/4] mtd: spi-nor: Parse SFDP SCCR Map   JaimeLiao
• [PATCH v7 4/4] mtd: spi-nor-core: Add support for Macronix Octal flash   JaimeLiao
• [PATCH] mtd: spi-nor: Parse SFDP Command Sequence to change to Octal DDR(8D-8D-8D) mode   JaimeLiao
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [PATCH v11 00/14] Add CAAM driver model support   Gaurav Jain
• [PATCH v11 01/14] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [PATCH v11 02/14] i.MX8M: crypto: updated device tree for supporting DM in SPL   Gaurav Jain
• [PATCH v11 03/14] crypto/fsl: i.MX8M: Enable Job ring driver model.   Gaurav Jain
• [PATCH v11 04/14] mx6sabre: Remove unnecessary SPL configs   Gaurav Jain
• [PATCH v11 05/14] i.MX6: Enable Job ring driver model.   Gaurav Jain
• [PATCH v11 06/14] i.MX7: Enable Job ring driver model.   Gaurav Jain
• [PATCH v11 07/14] i.MX7ULP: Enable Job ring driver model.   Gaurav Jain
• [PATCH v11 08/14] i.MX8: Add crypto node in device tree   Gaurav Jain
• [PATCH v11 09/14] crypto/fsl: i.MX8: Enable Job ring driver model.   Gaurav Jain
• [PATCH v11 10/14] Layerscape: Add crypto node in device tree   Gaurav Jain
• [PATCH v11 11/14] Layerscape: Enable Job ring driver model.   Gaurav Jain
• [PATCH v11 12/14] PPC: Add crypto node in device tree   Gaurav Jain
• [PATCH v11 13/14] PPC: Enable Job ring driver model.   Gaurav Jain
• [PATCH v11 14/14] update CAAM MAINTAINER   Gaurav Jain
• [PATCH v11 01/14] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• pull request of u-boot-fsl-qoriq for v2022.04   Priyanka Jain
• [PATCH v3 1/6] rockchip: move ROCKCHIP_STIMER_BASE to Kconfig   Paweł Jarosz
• [PATCH v4 0/5] fs/erofs: new filesystem   Huang Jianan
• [PATCH v4 0/5] fs/erofs: new filesystem   Huang Jianan
• [PATCH] include: configs: move USB first in the boot order for rk3399   Dan Johansen
• [PATCH v2 01/12] rockchip: rk3228-power: sync power domain dt-binding header from Linux   Johan Jonker
• [PATCH v2 02/12] rockchip: rk3228-cru: sync the clock dt-binding header from Linux   Johan Jonker
• [PATCH v2 03/12] arm: dts: rockchip: move all rk322x u-boot specific properties in separate dtsi files   Johan Jonker
• [PATCH v2 04/12] arm: dts: rockchip: sync rk322x.dtsi from Linux   Johan Jonker
• [PATCH v2 05/12] arm: dts: rockchip: sync rk3229-evb.dts from Linux   Johan Jonker
• [PATCH v2 06/12] rockchip: rk3288-power: sync power domain dt-binding header from Linux   Johan Jonker
• [PATCH v2 07/12] rockchip: rk3288-cru: sync the clock dt-binding header from Linux   Johan Jonker
• [PATCH v2 08/12] arm: dts: rockchip: move all rk3288 u-boot specific properties in separate dtsi files   Johan Jonker
• [PATCH v2 09/12] arm: dts: rockchip: sync rk3288.dtsi from Linux   Johan Jonker
• [PATCH v2 10/12] arm: dts: rockchip: sync rk3288 DT boards from Linux   Johan Jonker
• [PATCH v2 11/12] arm: dts: rockchip: sync rk3288-veyron DT from Linux   Johan Jonker
• [PATCH v2 12/12] rockchip: fix boot_devices constants   Johan Jonker
• [PATCH v2 12/12] rockchip: fix boot_devices constants   Johan Jonker
• [PATCH v2 12/12] rockchip: fix boot_devices constants   Johan Jonker
• [PATCH v3 01/12] rockchip: rk3228-power: sync power domain dt-binding header from Linux   Johan Jonker
• [PATCH v3 02/12] rockchip: rk3228-cru: sync the clock dt-binding header from Linux   Johan Jonker
• [PATCH v3 03/12] arm: dts: rockchip: move all rk322x u-boot specific properties in separate dtsi files   Johan Jonker
• [PATCH v3 04/12] arm: dts: rockchip: sync rk322x.dtsi from Linux   Johan Jonker
• [PATCH v3 05/12] arm: dts: rockchip: sync rk3229-evb.dts from Linux   Johan Jonker
• [PATCH v3 06/12] rockchip: rk3288-power: sync power domain dt-binding header from Linux   Johan Jonker
• [PATCH v3 07/12] rockchip: rk3288-cru: sync the clock dt-binding header from Linux   Johan Jonker
• [PATCH v3 08/12] arm: dts: rockchip: move all rk3288 u-boot specific properties in separate dtsi files   Johan Jonker
• [PATCH v3 09/12] arm: dts: rockchip: sync rk3288.dtsi from Linux   Johan Jonker
• [PATCH v3 10/12] arm: dts: rockchip: sync rk3288 DT boards from Linux   Johan Jonker
• [PATCH v3 11/12] arm: dts: rockchip: sync rk3288-veyron DT from Linux   Johan Jonker
• [PATCH v3 12/12] rockchip: fix boot_devices constants   Johan Jonker
• [PATCH v1 2/2] rockchip: mmc: rockchip_dw_mmc: add rk3066/rk3188 support   Johan Jonker
• [PATCH v2 2/2] mmc: dw_mmc: support transfer mode auto detection   Johan Jonker
• [PATCH v3 1/6] rockchip: move ROCKCHIP_STIMER_BASE to Kconfig   Johan Jonker
• [PATCH v3 1/6] rockchip: move ROCKCHIP_STIMER_BASE to Kconfig   Johan Jonker
• [PATCH v3 12/12] rockchip: fix boot_devices constants   Johan Jonker
• [PATCH] arm64: zynqmp: enable the PMUFW watchdog   Jorge Ramirez-Ortiz, Foundries
• [PATCH] arm64: zynqmp: enable the PMUFW watchdog   Jorge Ramirez-Ortiz, Foundries
• [PATCH 0/4] Add support for sam9x60_curiosity   Durai Manickam KR
• [PATCH 1/4] board: Add sam9x60_curiosity support   Durai Manickam KR
• [PATCH 2/4] ARM: dts: Add device tree files for sam9x60_curiosity   Durai Manickam KR
• [PATCH 3/4] configs: Add sam9x60_curiosity_mmc_defconfig   Durai Manickam KR
• [PATCH 4/4] configs: Add sam9x60_curiosity_nandflash_defconfig   Durai Manickam KR
• [PATCH 0/4] Add support for sam9x60_curiosity   Durai Manickam KR
• [PATCH 1/4] board: Add sam9x60_curiosity support   Durai Manickam KR
• [PATCH 2/4] ARM: dts: Add device tree files for sam9x60_curiosity   Durai Manickam KR
• [PATCH 3/4] configs: Add sam9x60_curiosity_mmc_defconfig   Durai Manickam KR
• [PATCH 4/4] configs: Add sam9x60_curiosity_nandflash_defconfig   Durai Manickam KR
• [PATCH 19/22] exynos: Drop CONFIG_CLK_*   Minkyu Kang
• [PATCH 04/11] exynos: Drop CONFIG_DEVICE_TREE_LIST   Minkyu Kang
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Mark Kettenis
• [PATCH v4 00/33] Initial implementation of standard boot   Mark Kettenis
• [PATCH] arm: apple: Increase RTKit timeout   Mark Kettenis
• [PATCH] arm: apple: Fix mem layout   Mark Kettenis
• QEMU NUMA and U-Boot   Mark Kettenis
• [PATCH] arm: apple: Fix mem layout   Mark Kettenis
• [PATCH v4 00/33] Initial implementation of standard boot   Mark Kettenis
• [PATCH 1/1] arm: apple: Add M1 Ultra support   Mark Kettenis
• [PATCH 13/15] imx: Convert some boards to DM_ETH   Troy Kisky
• [PATCH v1 0/5] Move board specific files to board directory   Troy Kisky
• [PATCH v1 0/5] Move board specific files to board directory   Troy Kisky
• [PATCH v6 0/2] sf: Check protection before writing/erasing flash   Jan Kiszka
• [PATCH v6 1/2] mtd: spi: Convert is_locked callback to is_unlocked   Jan Kiszka
• [PATCH v6 2/2] sf: Query write-protection status before operating the flash   Jan Kiszka
• [PATCH] doc: uefi: Fix reference to CONFIG_EFI_SECURE_BOOT   Jan Kiszka
• [RFC PATCH v3 0/2] enable menu-driven boot device selection   Masahisa Kojima
• [RFC PATCH v3 1/2] efi_loader: introduce "bootefi bootindex" command   Masahisa Kojima
• [RFC PATCH v3 2/2] bootmenu: add UEFI and disto_boot entries   Masahisa Kojima
• [RFC PATCH v3 1/2] efi_loader: introduce "bootefi bootindex" command   Masahisa Kojima
• [RFC PATCH v3 1/2] efi_loader: introduce "bootefi bootindex" command   Masahisa Kojima
• [RFC PATCH v3 2/2] bootmenu: add UEFI and disto_boot entries   Masahisa Kojima
• [RFC PATCH v3 2/2] bootmenu: add UEFI and disto_boot entries   Masahisa Kojima
• [RESEND RFC PATCH v2 2/4] lib/charset: add u16_strlcat() function   Masahisa Kojima
• [PATCH v4 00/11] enable menu-driven boot device selection   Masahisa Kojima
• [PATCH v4 01/11] bootmenu: fix menu API error handling   Masahisa Kojima
• [PATCH v4 02/11] lib/charset: add u16_strlcat() function   Masahisa Kojima
• [PATCH v4 03/11] test: unit test for u16_strlcat()   Masahisa Kojima
• [PATCH v4 04/11] menu: always show the menu regardless of the number of entry   Masahisa Kojima
• [PATCH v4 05/11] efi_loader: export efi_locate_device_handle()   Masahisa Kojima
• [PATCH v4 06/11] efi_loader: bootmgr: add booting from removable media   Masahisa Kojima
• [PATCH v4 07/11] bootmenu: add UEFI and disto_boot entries   Masahisa Kojima
• [PATCH v4 08/11] bootmenu: factor out the user input handling   Masahisa Kojima
• [PATCH v4 09/11] efi_loader: add menu-driven UEFI Boot Variable maintenance   Masahisa Kojima
• [PATCH v4 10/11] bootmenu: add removable media entries   Masahisa Kojima
• [PATCH v4 11/11] doc:bootmenu: add UEFI boot variable and distro boot support   Masahisa Kojima
• [PATCH v4 00/11] enable menu-driven boot device selection   Masahisa Kojima
• [PATCH v4 06/11] efi_loader: bootmgr: add booting from removable media   Masahisa Kojima
• [PATCH v4 10/11] bootmenu: add removable media entries   Masahisa Kojima
• [PATCH 0/2] Fix doc path in warning message   Johannes Krottmayer
• [PATCH 1/2] Makefile: Fix doc path in warning message   Johannes Krottmayer
• [PATCH 2/2] tools: buildman: Fix doc path in warning message   Johannes Krottmayer
• [PATCH 0/2] CONFIG_EARLY_TIMER: Fix EAGAIN issue and use DM too   Johannes Krottmayer
• [PATCH 1/2] common: board_f.c: Fix EAGAIN issue when CONFIG_TIMER_EARLY is selected   Johannes Krottmayer
• [PATCH 2/2] lib: time.c: Try also DM timer, when CONFIG_TIMER_EARLY is selected   Johannes Krottmayer
• [PATCH 0/2] Change behaviour of CONFIG_TIMER_EARLY   Johannes Krottmayer
• [PATCH 1/2] lib: time: Change behaviour of CONFIG_TIMER_EARLY   Johannes Krottmayer
• [PATCH 2/2] common: board_f: Fix CONFIG_TIMER_EARLY issue (EAGAIN)   Johannes Krottmayer
• arm: stm32h7: Support for the STM32H747I-DISCO board   Johannes (krjdev) Krottmayer
• drivers: clk: stm32h7: Endless loop of dead in driver probe function   Johannes (krjdev) Krottmayer
• arm: Simple delay function because of an chicken and egg problem   Johannes (krjdev) Krottmayer
• arm: stm32h7: Support for the STM32H747I-DISCO board   Johannes (krjdev) Krottmayer
• arm: stm32h7: Support for the STM32H747I-DISCO board   Johannes (krjdev) Krottmayer
• drivers: clk: stm32h7: Endless loop of dead in driver probe function   Johannes (krjdev) Krottmayer
• drivers: clk: stm32h7: Endless loop of dead in driver probe function   Johannes (krjdev) Krottmayer
• drivers: clk: stm32h7: Endless loop of dead in driver probe function   Johannes (krjdev) Krottmayer
• [PATCH 2/2] lib: time.c: Try also DM timer, when CONFIG_TIMER_EARLY is selected   Johannes (krjdev) Krottmayer
• [PATCH 1/2] common: board_f.c: Fix EAGAIN issue when CONFIG_TIMER_EARLY is selected   Johannes (krjdev) Krottmayer
• [PATCH 0/2] CONFIG_EARLY_TIMER: Fix EAGAIN issue and use DM too   Johannes (krjdev) Krottmayer
• [RFC PATCH v1 16/21] test: hush: Fix variable expansion tests for hush 2021.   Francis Laniel
• Re: [PATCH]armv7: cache: support L2 cache disable   Haifeng Li
• [PATCH]armv7: cache: support L2 cache disable   Haifeng Li
• [PATCH 1/1] cache: l2x0: Fix incorrect behavior if the latency is 1 cycle   Haifeng Li
• Re: cache: l2x0: Fix incorrect behavior if the latency is 1 cycle   Haifeng Li
• Re: [PATCH]armv7: cache: support L2 cache disable   Haifeng Li
• [PATCH v2 1/1] cache: l2x0: Fix incorrect behavior if the latency is 1 cycle   Haifeng Li
• Submitting patches for QorIQ components   Leo Li
• [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Ye Li
• [EXT] Re: [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Ye Li
• [PATCH] imx8ulp: Disable SPL exception vector   Ye Li
• [EXT] Re: GPMI NAND Regression on i.MX6S   Ye Li
• [EXT] Re: [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Ye Li
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Ye Li
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Ye Li
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Ye Li
• [PATCH] usb_hub: Set DM_FLAG_DEFAULT_PD_CTRL_OFF to usb_hub driver   Ye Li
• [PATCH] mtd: nand: mxs_nand_spl: Remove the page aligned access   Ye Li
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Ye Li
• [PATCH] mtd: rawnand: mxs_nand: Fix use_minimum_ecc for spl driver   Ye Li
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Ye Li
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Ye Li
• [PATCH v2] mtd: rawnand: mxs_nand: Fix use_minimum_ecc for spl driver   Ye Li
• [PATCH] riscv: Fix build against binutils 2.38   Leo Liang
• [PATCH] riscv: Fix build against binutils 2.38   Leo Liang
• [PATCH] riscv: Fix build against binutils 2.38   Leo Liang
• [PATCH v2 1/8] k210: use the board vendor name rather than the marketing name   Leo Liang
• [PATCH v2 4/8] k210: dts: align plic node with Linux   Leo Liang
• [PULL] u-boot-riscv/master   Leo Liang
• [PATCH v1 04/11] spi: rockchip-sfc: sanity check minimum freq   Jon Lin
• [PATCH v4] wdt: nuvoton: Add support for Nuvoton   Jim Liu
• [PATCH v5] wdt: nuvoton: Add support for Nuvoton   Jim Liu
• [PATCH v6] wdt: nuvoton: Add support for Nuvoton   Jim Liu
• [PATCH v7] wdt: nuvoton: Add support for Nuvoton   Jim Liu
• [PATCH 2/5] imx8mm-cl-iot-gate: Retrieve the DDR type from EEPROM   Paul Liu
• [PATCH v13 0/2] add TCP and HTTP for downloading images   Ying-Chun Liu
• [PATCH v13 1/2] net: Add TCP protocol   Ying-Chun Liu
• [PATCH v13 2/2] net: Add wget application   Ying-Chun Liu
• [PATCH v2 1/3] timer: atmel_tcb_timer: add atmel_tcb driver   Clément Léger
• [PATCH v3 0/3] add TCB driver for sama5d2   Clément Léger
• [PATCH v3 1/3] timer: atmel_tcb_timer: add atmel_tcb driver   Clément Léger
• [PATCH v3 2/3] ARM: dts: at91: sama5d2: add TCB node   Clément Léger
• [PATCH v3 3/3] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Clément Léger
• [PATCH v3 2/3] ARM: dts: at91: sama5d2: add TCB node   Clément Léger
• [PATCH v4 0/3] add TCB driver for sama5d2   Clément Léger
• [PATCH v4 1/3] timer: atmel_tcb_timer: add atmel_tcb driver   Clément Léger
• [PATCH v4 2/3] ARM: dts: at91: sama5d2: add TCB node   Clément Léger
• [PATCH v4 3/3] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Clément Léger
• [PATCH v4 2/3] ARM: dts: at91: sama5d2: add TCB node   Clément Léger
• [PATCH v4 2/3] ARM: dts: at91: sama5d2: add TCB node   Clément Léger
• [PATCH v5 0/4] add TCB driver for sama5d2   Clément Léger
• [PATCH v5 1/4] timer: atmel_tcb_timer: add atmel_tcb driver   Clément Léger
• [PATCH v5 2/4] ARM: dts: at91: sama5d2: add AIC node   Clément Léger
• [PATCH v5 3/4] ARM: dts: at91: sama5d2: add TCB node   Clément Léger
• [PATCH v5 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Clément Léger
• [PATCH v5 3/4] ARM: dts: at91: sama5d2: add TCB node   Clément Léger
• [PATCH v5 1/4] timer: atmel_tcb_timer: add atmel_tcb driver   Clément Léger
• [PATCH v5 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Clément Léger
• [PATCH v6 0/4] add TCB driver for sama5d2   Clément Léger
• [PATCH v6 1/4] timer: atmel_tcb_timer: add atmel_tcb driver   Clément Léger
• [PATCH v6 2/4] ARM: dts: at91: sama5d2: add AIC node   Clément Léger
• [PATCH v6 3/4] ARM: dts: at91: sama5d2: add TCB node   Clément Léger
• [PATCH v6 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Clément Léger
• [PATCH v6 2/4] ARM: dts: at91: sama5d2: add AIC node   Clément Léger
• [PATCH v7 0/4] add TCB driver for sama5d2   Clément Léger
• [PATCH v7 1/4] timer: atmel_tcb_timer: add atmel_tcb driver   Clément Léger
• [PATCH v7 2/4] ARM: dts: at91: sama5d2: add AIC node   Clément Léger
• [PATCH v7 3/4] ARM: dts: at91: sama5d2: add TCB node   Clément Léger
• [PATCH v7 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Clément Léger
• [PATCH v7 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Clément Léger
• [PATCH v7 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Clément Léger
• [PATCH v7 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Clément Léger
• [PATCH v8 0/5] add TCB driver for sama5d2   Clément Léger
• [PATCH v8 1/5] timer: atmel_tcb_timer: add atmel_tcb driver   Clément Léger
• [PATCH v8 2/5] ARM: dts: at91: sama5d2: add AIC node   Clément Léger
• [PATCH v8 3/5] ARM: dts: at91: sama5d2: add TCB node   Clément Léger
• [PATCH v8 4/5] ARM: dts: at91: sama5d2: add u-boot, dm-pre-reloc property for TCB   Clément Léger
• [PATCH v8 5/5] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Clément Léger
• [PATCH] arm: Add AM335x based CBC board   Lukasz Majewski
• [PATCH 1/3] arm: mmc: Add "ti,am335-sdhci" compatible for TI's omap_hsmmc driver   Lukasz Majewski
• [PATCH 1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217   Lukasz Majewski
• [PATCH] arm: Add AM335x based CBC board   Lukasz Majewski
• [PATCH] arm: Add AM335x based CBC board   Lukasz Majewski
• [PATCH 1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217   Lukasz Majewski
• [PATCH 1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217   Lukasz Majewski
• [PATCH v2 1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217   Lukasz Majewski
• [PATCH v2 2/3] power: pmic: Provide DM_PMIC support for tps65217 driver   Lukasz Majewski
• [PATCH v2 3/3] defconfig: Enable DM_PMIC and DM PMIC_TPS65217 on AM335x EVM board   Lukasz Majewski
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Lukasz Majewski
• [PATCH] mmc: xenon_sdhci: remove wait_dat0 SDHCI OP   Robert Marko
• [PATCH] mmc: xenon_sdhci: remove wait_dat0 SDHCI OP   Robert Marko
• [PATCH 1/4] arm: mvebu: dts: uDPU: update DTS   Robert Marko
• [PATCH 2/4] net: mvneta: add SFP TX disable handling   Robert Marko
• [PATCH 3/4] arm: mvebu: dts: uDPU: fix non-working networking   Robert Marko
• [PATCH 4/4] mvebu: uDPU: update defconfig   Robert Marko
• [PATCH 2/4] net: mvneta: add SFP TX disable handling   Robert Marko
• [PATCH v2 1/4] arm: mvebu: dts: uDPU: update DTS   Robert Marko
• [PATCH v2 2/4] net: mvneta: add SFP TX disable handling   Robert Marko
• [PATCH v2 3/4] arm: mvebu: dts: uDPU: fix non-working networking   Robert Marko
• [PATCH v2 4/4] mvebu: uDPU: update defconfig   Robert Marko
• [PATCH v2 2/4] net: mvneta: add SFP TX disable handling   Robert Marko
• [PATCH v3 1/4] arm: mvebu: dts: uDPU: update DTS   Robert Marko
• [PATCH v3 2/4] net: mvneta: add SFP TX disable handling   Robert Marko
• [PATCH v3 3/4] arm: mvebu: dts: uDPU: fix non-working networking   Robert Marko
• [PATCH v3 4/4] mvebu: uDPU: update defconfig   Robert Marko
• [PATCH v3 2/4] net: mvneta: add SFP TX disable handling   Robert Marko
• [PATCH] .mailmap: Record all address for main U-Boot contributor   Bin Meng
• [PATCH] usb: dwc3: Add support for usb3-phy PHY configuration   Bin Meng
• [PATCH] usb: dwc3: Add support to reset usb ULPI phy   Bin Meng
• [PATCH 1/2] x86: Add an enum name for the GNVS firmware type   Bin Meng
• [PATCH 2/2] x86: Correct the coreboot header file in MAINTAINERS   Bin Meng
• [PATCH 1/2] x86: Add an enum name for the GNVS firmware type   Bin Meng
• [PATCH] usb: dwc3: Add support to reset usb ULPI phy   Bin Meng
• [PATCH 1/1] doc: path to u-boot-spl.bin on SiFive Unmatched board   Bin Meng
• [PATCH v2 1/2] x86: Add an enum name for the GNVS firmware type   Bin Meng
• [PATCH v2 2/2] x86: Correct the coreboot header file in MAINTAINERS   Bin Meng
• [PATCH v2] usb: dwc3: Add support to reset usb ULPI phy   Bin Meng
• [PATCH v3 1/2] generic-phy: s/CONFIG_PHY/CONFIG_IS_ENABLED(PHY)/   Bin Meng
• [PATCH v3 2/2] usb: dwc3: Add support for usb3-phy PHY configuration   Bin Meng
• Please pull u-boot-x86   Bin Meng
• [PATCH 1/1] cmd: sbi: add Performance Monitoring Unit Extension   Bin Meng
• [PATCH 1/1] riscv: enable CONFIG_CMD_SBI for QEMU boards   Bin Meng
• [PATCH 01/11] virtio: pci: Fix discovery of device config length   Bin Meng
• [PATCH 02/11] virtio: pci: Bounds check device config access   Bin Meng
• [PATCH 03/11] virtio: pci: Bounds check notification writes   Bin Meng
• [PATCH 04/11] virtio: pci: Check virtio common config size   Bin Meng
• [PATCH 05/11] virtio: pci: Check virtio capability is in bounds   Bin Meng
• [PATCH 1/1] dm: fix function documentation in include/dm/ofnode.h   Bin Meng
• [RFC] Dumping load addresses - bootefi qemu gdb remote debugging   Bin Meng
• [PATCH 05/11] virtio: pci: Check virtio capability is in bounds   Bin Meng
• [PATCH 03/11] virtio: pci: Bounds check notification writes   Bin Meng
• [PATCH 06/11] virtio: pci: Read entire capability into memory   Bin Meng
• [PATCH 07/11] virtio: pci: Check virtio configs are mapped   Bin Meng
• [PATCH 08/11] pci: Check region ranges are addressable   Bin Meng
• [PATCH 09/11] pci: Add function to validate PCI address range   Bin Meng
• [PATCH 10/11] virtio: pci: Check mapped range is in a PCI region   Bin Meng
• [PATCH 11/11] virtio: pci: Allow exclusion of legacy driver   Bin Meng
• [PATCH 07/11] virtio: pci: Check virtio configs are mapped   Bin Meng
• [PATCH 06/11] virtio: pci: Read entire capability into memory   Bin Meng
• [PATCH 06/11] virtio: pci: Read entire capability into memory   Bin Meng
• [PATCH] doc: usage: Update the extension command title   Bin Meng
• [PATCH 1/3] doc: usage: Convert README.vxworks to reST   Bin Meng
• [PATCH 2/3] doc: usage: Update vxworks doc to mention RISC-V support   Bin Meng
• [PATCH 3/3] doc: usage: Convert README.plan9 to reST   Bin Meng
• [PATCH] doc: usage: Group all shell command docs into cmd/ sub-direcotry   Bin Meng
• [PATCH] doc: mmc dev   Bin Meng
• [PATCH] net: phy: Fix rgmii-id phy reset timeout issue   Bin Meng
• [PATCH 0/2] AM64: Tick timer fixes   Nishanth Menon
• [PATCH v2 0/2] AM64: Tick timer fixes   Nishanth Menon
• [PATCH v2 1/2] configs: am64x_evm_a53_defconfig: Switch to per-cpu timer as tick provider   Nishanth Menon
• [PATCH v2 2/2] ARM: dts: k3-am642: Correct timer frequency   Nishanth Menon
• iMX8MM USB support?   Tommaso Merciai
• [PATCH 0/9] imx8mm: add pwm-imx backlight support   Tommaso Merciai
• [PATCH 1/9] arch: mach-imx: imx8m: add pwm1/pwm2 base address   Tommaso Merciai
• [PATCH 2/9] arch: mach-imx: imx8m: add pwm ctrl registers fields defines   Tommaso Merciai
• [PATCH 3/9] arch: mach-imx: imx8m: add pwm_regs struct in imx-regs   Tommaso Merciai
• [PATCH 4/9] arm: imx: imx8mm: add enable_pwm_clk function   Tommaso Merciai
• [PATCH 5/9] imx8m: clock: add enable_pwm_clk function   Tommaso Merciai
• [PATCH 6/9] configs: imx8mm_evk: add CONFIG_IMX6_PWM_PER_CLK config   Tommaso Merciai
• [PATCH 7/9] imx8mm_evk: spl: enable pwm clock   Tommaso Merciai
• [PATCH 8/9] arm: dts: imx8mm_evk: add pwm1/backlight support   Tommaso Merciai
• [PATCH 9/9] configs: imx8mm_evk: add pwm backlight support   Tommaso Merciai
• [PATCH 4/9] arm: imx: imx8mm: add enable_pwm_clk function   Tommaso Merciai
• [PATCH 8/9] arm: dts: imx8mm_evk: add pwm1/backlight support   Tommaso Merciai
• [PATCH 8/9] arm: dts: imx8mm_evk: add pwm1/backlight support   Tommaso Merciai
• [PATCH 8/9] arm: dts: imx8mm_evk: add pwm1/backlight support   Tommaso Merciai
• [PATCH 8/9] arm: dts: imx8mm_evk: add pwm1/backlight support   Tommaso Merciai
• [PATCH v2 0/9] imx8mm: add pwm-imx backlight support   Tommaso Merciai
• [PATCH v2 1/9] arch: mach-imx: imx8m: add pwm1/pwm2 base address   Tommaso Merciai
• [PATCH v2 2/9] arch: mach-imx: imx8m: add pwm ctrl registers fields defines   Tommaso Merciai
• [PATCH v2 3/9] arch: mach-imx: imx8m: add pwm_regs struct in imx-regs   Tommaso Merciai
• [PATCH v2 4/9] arm: imx: imx8mm: add enable_pwm_clk function   Tommaso Merciai
• [PATCH v2 5/9] imx8m: clock: add enable_pwm_clk function   Tommaso Merciai
• [PATCH v2 6/9] configs: imx8mm_evk: add CONFIG_IMX6_PWM_PER_CLK config   Tommaso Merciai
• [PATCH v2 7/9] imx8mm_evk: spl: enable pwm clock   Tommaso Merciai
• [PATCH v2 8/9] arm: dts: imx8mm_evk: add pwm1/backlight support   Tommaso Merciai
• [PATCH v2 9/9] configs: imx8mm_evk: add pwm backlight support   Tommaso Merciai
• [PATCH v2 7/9] imx8mm_evk: spl: enable pwm clock   Tommaso Merciai
• [PATCH v2 4/9] arm: imx: imx8mm: add enable_pwm_clk function   Tommaso Merciai
• [PATCH v2 4/9] arm: imx: imx8mm: add enable_pwm_clk function   Tommaso Merciai
• [PATCH v2 4/9] arm: imx: imx8mm: add enable_pwm_clk function   Tommaso Merciai
• [PATCH v2 7/9] imx8mm_evk: spl: enable pwm clock   Tommaso Merciai
• [PATCH v2 4/9] arm: imx: imx8mm: add enable_pwm_clk function   Tommaso Merciai
• [PATCH] clk: imx8mm: add pwm clocks support   Tommaso Merciai
• [PATCH v2 4/9] arm: imx: imx8mm: add enable_pwm_clk function   Tommaso Merciai
• [PATCH v3 0/9] imx8mm: add pwm-imx backlight support   Tommaso Merciai
• [PATCH v3 1/9] arch: mach-imx: imx8m: add pwm ctrl registers fields defines   Tommaso Merciai
• [PATCH v3 2/9] arch: mach-imx: imx8m: add pwm_regs struct in imx-regs   Tommaso Merciai
• [PATCH v3 3/9] clk: imx8mm: add pwm clocks support   Tommaso Merciai
• [PATCH v3 4/9] drivers: pwm: pwm-imx: move pwm-imx-util into pwm-imx   Tommaso Merciai
• [PATCH v3 5/9] driver: pwm: pwm-imx: get and enable per/ipg clock using dm   Tommaso Merciai
• [PATCH v3 6/9] driver: pwm: pwm-imx: introduce pwm_dm_imx_get_parms   Tommaso Merciai
• [PATCH v3 7/9] driver: pwm: pwm-imx: separe dm from non dm implementation   Tommaso Merciai
• [PATCH v3 8/9] arm: dts: imx8mm_evk: add pwm1/backlight support   Tommaso Merciai
• [PATCH v3 9/9] configs: imx8mm_evk: add pwm backlight support   Tommaso Merciai
• [PATCH v4 0/9] imx8mm: add pwm-imx backlight support   Tommaso Merciai
• [PATCH v4 1/9] arch: mach-imx: imx8m: add pwm ctrl registers fields defines   Tommaso Merciai
• [PATCH v4 2/9] arch: mach-imx: imx8m: add pwm_regs struct in imx-regs   Tommaso Merciai
• [PATCH v4 3/9] clk: imx8mm: add pwm clocks support   Tommaso Merciai
• [PATCH v4 4/9] drivers: pwm: pwm-imx: move pwm-imx-util into pwm-imx   Tommaso Merciai
• [PATCH v4 5/9] driver: pwm: pwm-imx: get and enable per/ipg clock using dm   Tommaso Merciai
• [PATCH v4 6/9] driver: pwm: pwm-imx: introduce pwm_dm_imx_get_parms   Tommaso Merciai
• [PATCH v4 7/9] driver: pwm: pwm-imx: separe dm from non dm implementation   Tommaso Merciai
• [PATCH v4 8/9] arm: dts: imx8mm_evk: add pwm1/backlight support   Tommaso Merciai
• [PATCH v4 9/9] configs: imx8mm_evk: add pwm backlight support   Tommaso Merciai
• [PATCH v4 9/9] configs: imx8mm_evk: add pwm backlight support   Tommaso Merciai
• [PATCH v5 0/9] imx8mm: add pwm-imx backlight support   Tommaso Merciai
• [PATCH v5 1/9] arch: mach-imx: imx8m: add pwm ctrl registers fields defines   Tommaso Merciai
• [PATCH v5 2/9] arch: mach-imx: imx8m: add pwm_regs struct in imx-regs   Tommaso Merciai
• [PATCH v5 3/9] clk: imx8mm: add pwm clocks support   Tommaso Merciai
• [PATCH v5 4/9] drivers: pwm: pwm-imx: move pwm-imx-util into pwm-imx   Tommaso Merciai
• [PATCH v5 5/9] driver: pwm: pwm-imx: get and enable per/ipg clock using dm   Tommaso Merciai
• [PATCH v5 6/9] driver: pwm: pwm-imx: introduce pwm_dm_imx_get_parms   Tommaso Merciai
• [PATCH v5 7/9] driver: pwm: pwm-imx: separe dm from non dm implementation   Tommaso Merciai
• [PATCH v5 8/9] arm: dts: imx8mm_evk: add pwm1/backlight support   Tommaso Merciai
• [PATCH v5 9/9] configs: imx8mm_evk: add pwm backlight support   Tommaso Merciai
• [PATCH 5/8] usb: ehci-mx6: Allow building SDP for imx8mm   Tommaso Merciai
• [PATCH 0/3] Introduce new sign binman's option   Ivan Mikhaylov
• [PATCH 1/3] binman: add sign option for binman   Ivan Mikhaylov
• [PATCH 2/3] binman: add documentation for binman sign option   Ivan Mikhaylov
• [PATCH 3/3] binman: add test for sign option   Ivan Mikhaylov
• ipq40xx serial driver not working   Alexey Minnekhanov
• [PATCH] dt-bindings: mtd: partitions: add UBI binding   Rafał Miłecki
• [PATCH V2] dt-bindings: nvmem: add U-Boot environment variables binding   Rafał Miłecki
• [PATCH V3] dt-bindings: nvmem: add U-Boot environment variables binding   Rafał Miłecki
• [PATCH V3] dt-bindings: nvmem: add U-Boot environment variables binding   Rafał Miłecki
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Soeren Moch
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Soeren Moch
• [PATCH 2/5] tbs2910: Disable ext4 write   Soeren Moch
• [PATCH 1/2] board: tbs2910: Enable Link Time Optimizations in defconfig   Soeren Moch
• [PATCH 2/2] board: tbs2910: Convert to DM_SERIAL   Soeren Moch
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Soeren Moch
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Soeren Moch
• [PATCH 2/2] board: tbs2910: Convert to DM_SERIAL   Soeren Moch
• [PATCH 2/2] board: tbs2910: Convert to DM_SERIAL   Soeren Moch
• [PATCH] tbs2910: Convert to DM_SERIAL   Soeren Moch
• [PATCH] tbs2910: Convert to DM_SERIAL   Soeren Moch
• [PATCH 2/2] board: tbs2910: Convert to DM_SERIAL   Soeren Moch
• [PATCH] tbs2910: Convert to DM_SERIAL   Soeren Moch
• [PATCH 2/2] board: tbs2910: Convert to DM_SERIAL   Sören Moch
• [PATCH v4 0/3] mtd: Support slc-mode for NTC CHIP   Chris Morgan
• [PATCH] spi: rockchip_sfc: Add missing include for dm/device_compat.h   Chris Morgan
• [PATCH] rockchip: clk: add clocks to px30_clk_enable   Chris Morgan
• [PATCH v4 0/3] mtd: Support slc-mode for NTC CHIP   Chris Morgan
• [PATCH] [PATCH] sunxi-nand: Undo removal of DMA that breaks NAND SPL   Chris Morgan
• [PATCH v3 0/4] Add ESM driver support for AM64x R5 SPL/U-boot   Hari Nagalla
• [PATCH v3 1/4] misc: k3_esm: Add functionality to set and route error events within K3SoC   Hari Nagalla
• [PATCH v3 2/4] arm: dts: k3-am64: Add support for ESM device nodes   Hari Nagalla
• [PATCH v3 3/4] arch: arm: mach-k3: am642_init: Probe ESM nodes   Hari Nagalla
• [PATCH v3 4/4] configs: am64x_evm_r5_defconfig: Add support for ESM   Hari Nagalla
• [PATCH] configs: ti: use standard configuration nodes naming   Romain Naour
• [PATCH V3] Makefile: Sort u-boot-initial-env output   Christoph Niedermaier
• [PATCH] arm: kirkwood: nas220: Add DM Ethernet, SATA, GPIO   Hajo Noerenberg
• [PATCH v3] arm: kirkwood: nas220: Add DM Ethernet, SATA, GPIO   Hajo Noerenberg
• [PATCH v3] arm: kirkwood: nas220: Add DM Ethernet, SATA, GPIO   Hajo Noerenberg
• [PATCH] arm: kirkwood: Add nas440 board, Marvell 88SE6121 AHCI   Hajo Noerenberg
• [PATCH] arm: kirkwood: Add nas440 board, Marvell 88SE6121 AHCI   Hajo Noerenberg
• [PATCH] arm: kirkwood: Add nas440 board, Marvell 88SE6121 AHCI   Hajo Noerenberg
• [PATCH] ahci: add PCI bindings for Marvell 88SE6121/45 SATA controllers   Hajo Noerenberg
• GPMI NAND Regression on i.MX6S   Sean Nyekjaer
• [PATCH] mtd: gpmi: fix the gpmi bch setting unalignment issue   Sean Nyekjaer
• [PATCH v2] mtd: gpmi: fix the bch setting backward compatible issue   Sean Nyekjaer
• [PATCH] bosch: Add inital board support for ACC   Philip Oberfichtner
• [PATCH v2 0/2] Add pmic bootcount driver   Philip Oberfichtner
• [PATCH v2 1/2] power: pfuze100: Add MEMx register definitions   Philip Oberfichtner
• [PATCH v2 2/2] bootcount: Add pmic pfuze100 bootcount driver   Philip Oberfichtner
• [PATCH 2/2] bootcount: Add pmic pfuze100 bootcount driver   Philip Oberfichtner
• dsa driver for mv88e61xx   Vladimir Oltean
• dsa driver for mv88e61xx   Vladimir Oltean
• dsa driver for mv88e61xx   Vladimir Oltean
• [PATCH] video: sandbox: fix missing shim definition of sandbox_sdl_remove_display()   Vladimir Oltean
• [PATCH 1/2] net: dsa: fix phydev->speed being uninitialized for the CPU port fixed PHY   Vladimir Oltean
• [PATCH 1/2] net: dsa: fix phydev->speed being uninitialized for the CPU port fixed PHY   Vladimir Oltean
• [PATCH 1/2] net: dsa: fix phydev->speed being uninitialized for the CPU port fixed PHY   Vladimir Oltean
• [PATCH 4/6] net: fec: add support for DM_MDIO   Vladimir Oltean
• [PATCH 4/6] net: fec: add support for DM_MDIO   Vladimir Oltean
• [PATCH] bootcount: clarify documentation   Michael Opdenacker
• QEMU NUMA and U-Boot   François Ozog
• [PATCH] ARM: mvebu: x530: clearfog: Add ODT configuration   Chris Packham
• FIT image with different load addresses   Chris Packham
• [PATCH 0/6] Add MV88E61xx DSA driver and use on gwventana   Chris Packham
• [PATCH] rpi: Redefine memory offsets for increased kernel image size   Jian-Hong Pan
• [PATCH] rockchip: rk3328: enable USB mass storage on Renegade   Leonidas-Panagiotis Papadakos
• [PATCH] lib/crypto: support sha384/sha512 in x509/pkcs7   Dhananjay Phadke
• [PATCH] lib/crypto: support sha384/sha512 in x509/pkcs7   Dhananjay Phadke
• TFTP hangs with fragmented IP packets   Laurent Pinchart
• [PATCH] imx8ulp: clock: Fix lcd clock algo   Loic Poulain
• [PATCH] sunxi: f1c100s: Fix FEL registers restore   Andre Przywara
• [PATCH v2 0/3] Add SPI boot to SPL on SUNIV/F1C100s   Andre Przywara
• [PATCH] sunxi: f1c100s: Drop SYSRESET to enable reset functionality   Andre Przywara
• [PATCH v2 0/3] Add SPI boot to SPL on SUNIV/F1C100s   Andre Przywara
• [PATCH 00/17] arm: semihosting: Cleanups and new features   Andre Przywara
• [PATCH 00/11] vexpress64: OF_CONTROL and ARMv8-R64 support   Andre Przywara
• [PATCH 01/11] vexpress64: fvp: Fix automatic boot   Andre Przywara
• [PATCH 02/11] vexpress64: Kconfig: move board definitions out of arch/arm   Andre Przywara
• [PATCH 03/11] arm: dts: Add Arm FVP Fastmodel RevC .dts files from Linux   Andre Przywara
• [PATCH 04/11] vexpress64: fvp: enable OF_CONTROL   Andre Przywara
• [PATCH 05/11] vexpress64: config header: unify environment definition   Andre Przywara
• [PATCH 06/11] vexpress64: move hardware setting from defconfig to Kconfig   Andre Przywara
• [PATCH 07/11] vexpress64: fvp: add distro_boot support   Andre Przywara
• [PATCH 08/11] vexpress64: defconfigs: allow default commands   Andre Przywara
• [PATCH 09/11] vexpress64: generalise page table generation   Andre Przywara
• [PATCH 10/11] vexpress64: pick DRAM size from DT   Andre Przywara
• [PATCH 11/11] vexpress64: Add ARMv8R-64 board variant   Andre Przywara
• [PATCH] sunxi: fix build when CONFIG_UART0_PORT_F is selected   Andre Przywara
• Pull request: u-boot-sunxi/master for v2022.04   Andre Przywara
• [PATCH v2] armv8: layerscape: fix the function mismatch issue   Andre Przywara
• [PATCH 02/15] arm: sunxi: Remove most SoC-specific config header files   Andre Przywara
• [PATCH 02/15] arm: sunxi: Remove most SoC-specific config header files   Andre Przywara
• [PATCH 00/17] arm: semihosting: Cleanups and new features   Andre Przywara
• [PATCH 00/17] arm: semihosting: Cleanups and new features   Andre Przywara
• [PATCH v2 00/28] arm: semihosting: Cleanups and new features   Andre Przywara
• [PATCH 0/2] sunxi: Fix Ethernet on mostly A20 boards   Andre Przywara
• [PATCH 1/2] sunxi: Fix old GMAC pinmux setup   Andre Przywara
• [PATCH 2/2] sunxi: dts: Update RGMII phy-mode properties   Andre Przywara
• [PATCH v4] wdt: nuvoton: Add support for Nuvoton   Andre Przywara
• [PATCH 1/2] sunxi: Fix old GMAC pinmux setup   Andre Przywara
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Andre Przywara
• A20-OLinuXino-LIME2 network regression [Was: [PATCH v2 1/5] sunxi: move non-essential code out of s_init()]   Andre Przywara
• [PATCH v7] wdt: nuvoton: Add support for Nuvoton   Andre Przywara
• [PATCH 1/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   Andre Przywara
• Pull request: u-boot-sunxi/master fix for v2022.04   Andre Przywara
• [PATCH v2 13/23] pinctrl: sunxi: Add I2C pinmuxes   Andre Przywara
• [PATCH] arm: imx: parse-container: add some missing end of line   Clément Péron
• R: [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Raffaele RECALCATI
• [PATCH v4] scripts: Makefile.lib: generate dsdt_generated.c instead of dsdt.c   Philippe REYNES
• [PATCH v6 15/16] cmd: verify: initial import   Philippe REYNES
• [PATCH v6 07/16] boot: image: add a stage pre-load   Philippe REYNES
• [PATCH v7 14/16] test: py: vboot: add test for global image signature   Philippe REYNES
• [PATCH v7 14/16] test: py: vboot: add test for global image signature   Philippe REYNES
• [PATCH v6 15/16] cmd: verify: initial import   Philippe REYNES
• [PATCH] Add ethernet0 alias in Nanopi NEO's device tree   Baltazár Radics
• [PATCH v2] Add ethernet0 alias in Nanopi NEO's device tree   Baltazár Radics
• [PATCH 0/2] AM64: Tick timer fixes   Vignesh Raghavendra
• [PATCH 1/2] configs: am64x_evm_a53_defconfig: Switch to GTC as tick timer   Vignesh Raghavendra
• [PATCH 2/2] ARM: dts: k3-am642: Fix correct timer frequency   Vignesh Raghavendra
• [PATCH] ARM: dts: k3-j721s2: Correct timer frequency   Vignesh Raghavendra
• [PATCH v2 0/2] AM64: Tick timer fixes   Vignesh Raghavendra
• [PATCH v2 1/2] configs: am64x_evm_a53_defconfig: Switch to per-cpu timer as tick provider   Vignesh Raghavendra
• [PATCH v2 2/2] ARM: dts: k3-am642: Correct timer frequency   Vignesh Raghavendra
• [PATCH] arm64: zynqmp: enable the PMUFW watchdog   Jorge Ramirez-Ortiz
• [PATCH 1/2] ram: k3-ddrss: Fix register name and explain its usage   Dominic Rath
• [PATCH 2/2] ram: k3-ddrss: Fix register definitions   Dominic Rath
• [PATCH v4] mtd: gpmi: fix the bch setting backward compatible issue   Miquel Raynal
• [PATCH] usb: dwc3: Add support to reset usb ULPI phy   T Karthik Reddy
• [PATCH] board: .gitignore: replace dsdt.c by dsdt_generated.c   Philippe Reynes
• [PATCH] doc: device-tree-bindings: watchdog: document common properties   Philippe Reynes
• [PATCH v7 00/16] image: add a stage pre-load   Philippe Reynes
• [PATCH v7 01/16] arch: Kconfig: imply BINMAN for SANDBOX   Philippe Reynes
• [PATCH v7 02/16] lib: Kconfig: enhance help for ASN1   Philippe Reynes
• [PATCH v7 03/16] lib: Kconfig: enhance the help of OID_REGISTRY   Philippe Reynes
• [PATCH v7 04/16] lib: allow to build asn1 decoder and oid registry in SPL   Philippe Reynes
• [PATCH v7 05/16] lib: crypto: allow to build crypyo in SPL   Philippe Reynes
• [PATCH v7 06/16] lib: rsa: allow rsa verify with pkey in SPL   Philippe Reynes
• [PATCH v7 07/16] boot: image: add a stage pre-load   Philippe Reynes
• [PATCH v7 08/16] cmd: bootm: add a stage pre-load   Philippe Reynes
• [PATCH v7 09/16] common: spl: fit_ram: allow to use image pre load   Philippe Reynes
• [PATCH v7 10/16] mkimage: add public key for image pre-load stage   Philippe Reynes
• [PATCH v7 11/16] Makefile: provide sah-key to binman   Philippe Reynes
• [PATCH v7 12/16] tools: binman: add support for pre-load header   Philippe Reynes
• [PATCH v7 13/16] configs: sandbox_defconfig: enable stage pre-load in bootm   Philippe Reynes
• [PATCH v7 14/16] test: py: vboot: add test for global image signature   Philippe Reynes
• [PATCH v7 15/16] cmd: pre_load_verify: initial import   Philippe Reynes
• [PATCH v7 16/16] configs: sandbox_defconfig: enable config CMD_PRE_LOAD_VERIFY   Philippe Reynes
• [PATCH v8 00/15] image: add a stage pre-load   Philippe Reynes
• [PATCH v8 01/15] arch: Kconfig: imply BINMAN for SANDBOX   Philippe Reynes
• [PATCH v8 02/15] lib: Kconfig: enhance help for ASN1   Philippe Reynes
• [PATCH v8 03/15] lib: Kconfig: enhance the help of OID_REGISTRY   Philippe Reynes
• [PATCH v8 04/15] lib: allow to build asn1 decoder and oid registry in SPL   Philippe Reynes
• [PATCH v8 05/15] lib: crypto: allow to build crypyo in SPL   Philippe Reynes
• [PATCH v8 06/15] lib: rsa: allow rsa verify with pkey in SPL   Philippe Reynes
• [PATCH v8 07/15] boot: image: add a stage pre-load   Philippe Reynes
• [PATCH v8 08/15] cmd: bootm: add a stage pre-load   Philippe Reynes
• [PATCH v8 09/15] common: spl: fit_ram: allow to use image pre load   Philippe Reynes
• [PATCH v8 10/15] mkimage: add public key for image pre-load stage   Philippe Reynes
• [PATCH v8 11/15] Makefile: provide sah-key to binman   Philippe Reynes
• [PATCH v8 12/15] tools: binman: add support for pre-load header   Philippe Reynes
• [PATCH v8 13/15] configs: sandbox_defconfig: enable stage pre-load in bootm   Philippe Reynes
• [PATCH v8 14/15] test: py: vboot: add test for global image signature   Philippe Reynes
• [PATCH v8 15/15] cmd: bootm: add subcommand preload   Philippe Reynes
• ipq40xx serial driver not working   Florence Riker
• [ANN] U-Boot v2022.04-rc3 released   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• [PATCH v2 0/6] Exception handling in HYP mode on ARMv7-A   Tom Rini
• [PATCH 1/9] patman: Correct pylint errors   Tom Rini
• [PATCH 2/9] buildman: Correct pylint errors   Tom Rini
• [PATCH 3/9] dtoc: Correct pylint errors   Tom Rini
• [PATCH 4/9] binman: Correct pylint errors   Tom Rini
• [PATCH 5/9] moveconfig: Correct pylint errors   Tom Rini
• [PATCH 6/9] test: Correct pylint errors   Tom Rini
• [PATCH 7/9] Makefile: Add a way to check for pylint errors   Tom Rini
• [PATCH 8/9] buildman: Update default config to build for sandbox   Tom Rini
• [PATCH 9/9] Azure/GitLab CI: Add the pylint checker   Tom Rini
• [PATCH v2 1/6] cmd: exception: arm64: fix undefined, add faults   Tom Rini
• [PATCH v2 2/6] armv8: Always unmask SErrors   Tom Rini
• [PATCH v2 3/6] armv8: Force SP_ELx stack pointer usage   Tom Rini
• [PATCH v2 4/6] arm: Clean up asm/io.h   Tom Rini
• [PATCH v2 5/6] armv8: Simplify switch_el macro   Tom Rini
• [PATCH v2 6/6] armv8: Fix and simplify branch_if_master/branch_if_slave   Tom Rini
• [PATCH] arm: Add AM335x based CBC board   Tom Rini
• [PATCH] arm: Add AM335x based CBC board   Tom Rini
• [PATCH] arm: Add AM335x based CBC board   Tom Rini
• pull request of u-boot-fsl-qoriq for v2022.04   Tom Rini
• [PULL] u-boot-at91-fixes-2022.04-a   Tom Rini
• [PATCH v4 0/5] fs/erofs: new filesystem   Tom Rini
• [PATCH v2 1/5] doc: binding: scmi: link to latest Linux kernel binding   Tom Rini
• [PATCH v2 2/5] sandbox: scmi: test against a single scmi agent   Tom Rini
• [PATCH v2 3/5] scmi: change parameter dev in devm_scmi_process_msg   Tom Rini
• [PATCH v2 4/5] firmware: scmi: fix sandbox and related tests for clock discovery   Tom Rini
• [PATCH v2 5/5] clk: scmi: register scmi clocks with CCF   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH 1/4] powerpc: Remove unused MPC8540/60ADS code   Tom Rini
• [PATCH 2/4] Convert CONFIG_BTB to Kconfig   Tom Rini
• [PATCH 3/4] arm: exynos: Move BL1/2 SPI flash defines to their user, drop CONFIG   Tom Rini
• [PATCH 4/4] Convert CONFIG_BOARD_COMMON to Kconfig   Tom Rini
• [PATCH 1/9] Convert CONFIG_BIOSEMU to Kconfig   Tom Rini
• [PATCH 2/9] Convert CONFIG_BOARD_ECC_SUPPORT to Kconfig   Tom Rini
• [PATCH 3/9] Convert CONFIG_BOARD_POSTCLK_INIT to Kconfig   Tom Rini
• [PATCH 4/9] Convert CONFIG_BOOTFILE to Kconfig   Tom Rini
• [PATCH 5/9] powerpc: P1010RDB: Move CONFIG_BOOTMODE out of CONFIG namespace   Tom Rini
• [PATCH 6/9] Convert CONFIG_BOOTP_MAY_FAIL et al to Kconfig   Tom Rini
• [PATCH 7/9] net: Remove CONFIG_BOOTP_DHCP_REQUEST_DELAY   Tom Rini
• [PATCH 8/9] Convert CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS to Kconfig   Tom Rini
• [PATCH 9/9] Convert CONFIG_CHIP_SELECTS_PER_CTRL to Kconfig   Tom Rini
• [PATCH 00/17] arm: semihosting: Cleanups and new features   Tom Rini
• [PATCH v4 0/5] fs/erofs: new filesystem   Tom Rini
• [PATCH] configs: ti: use standard configuration nodes naming   Tom Rini
• [PATCH v2] arm: mach-k3: am6_init: Use CONFIG_TI_I2C_BOARD_DETECT   Tom Rini
• [PATCH] configs: j721e_*_evm_a72_defconfig: Enable config for setting mmc speed mode   Tom Rini
• [PATCH] arm: dts: iot2050: Add cfg register space for ringacc and udmap   Tom Rini
• [PATCH 1/1] cmd: pwm: fix typo 'eisable' -> 'disable'   Tom Rini
• [PATCH 1/1] mkimage: error handling for FIT image   Tom Rini
• [PATCH] .mailmap: Record all address for main U-Boot contributor   Tom Rini
• [PATCH] lib: rsa: use actual OpenSSL 1.1.0 EVP MD API   Tom Rini
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Tom Rini
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Tom Rini
• Pull request: u-boot-sunxi/master for v2022.04   Tom Rini
• [PATCH v2 02/13] Makefile: Allow LTO to be disabled for a build   Tom Rini
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Tom Rini
• [PATCH 1/5] bcm6753: add initial support   Tom Rini
• [PATCH 2/5] gpio: bcm6345: allow to use this driver on arm bcm6753   Tom Rini
• [PATCH 3/5] nand: brcmnand: add bcm6753 support   Tom Rini
• [PATCH 4/5] watchdog: bcm6345: allow to use this driver on arm bcm6753   Tom Rini
• [PATCH 5/5] bcm96753ref: add initial support   Tom Rini
• [PATCH 1/3] gpio: Add Aspeed GPIO driver   Tom Rini
• [PATCH 2/3] ARM: dts: ast2500: Add ngpios property to GPIO node   Tom Rini
• [PATCH 3/3] configs: evb-ast2[56]00: Enable GPIO control   Tom Rini
• [PATCH 1/4] drivers: led: led_bcm6753: initial support   Tom Rini
• [PATCH 2/4] arch: arm: dts: bcm6753: add led support   Tom Rini
• [PATCH 3/4] arch: arm: dts: bcm96753ref: enable led support   Tom Rini
• [PATCH 4/4] configs: bcm96753ref_ram_defconfig: enable led support   Tom Rini
• [PATCH 1/3] arm: mmc: Add "ti, am335-sdhci" compatible for TI's omap_hsmmc driver   Tom Rini
• [PATCH 2/3] arm: dts: Add mmc[01] aliases to am33xx.dtsi   Tom Rini
• [PATCH 3/3] arm: dts: Add DTS description for MMC2 am33xx devices   Tom Rini
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Tom Rini
• [PATCH v2 00/13] event: Provide support for events to connect subsystems   Tom Rini
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Tom Rini
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Tom Rini
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Tom Rini
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Tom Rini
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Tom Rini
• [PATCH v2] mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON when necessary   Tom Rini
• [PATCH v2] drivers: serial: Make sure we really return a serial device   Tom Rini
• [PATCH] .mailmap: Fix Heinrich's xypron.glpk at gmx.de record   Tom Rini
• [PATCH] board: .gitignore: replace dsdt.c by dsdt_generated.c   Tom Rini
• Please pull u-boot-watchdog/master   Tom Rini
• [PATCH 01/15] Convert CONFIG_ARMV7_SECURE_BASE et al to Kconfig   Tom Rini
• [PATCH 02/15] arm: sunxi: Remove most SoC-specific config header files   Tom Rini
• [PATCH 03/15] Convert CONFIG_ARMV8_SWITCH_TO_EL1 to Kconfig   Tom Rini
• [PATCH 04/15] Convert CONFIG_A003399_NOR_WORKAROUND to Kconfig   Tom Rini
• [PATCH 05/15] Convert CONFIG_A008044_WORKAROUND to Kconfig   Tom Rini
• [PATCH 06/15] Convert CONFIG_ARP_TIMEOUT to Kconfig   Tom Rini
• [PATCH 07/15] Convert CONFIG_NET_RETRY_COUNT to Kconfig   Tom Rini
• [PATCH 08/15] powerpc: Move CONFIG_BPTR_VIRT_ADDR out of CONFIG namespace   Tom Rini
• [PATCH 09/15] Convert CONFIG_BOOT_RETRY_TIME et al to Kconfig   Tom Rini
• [PATCH 10/15] Convert CONFIG_NFS_TIMEOUT to Kconfig   Tom Rini
• [PATCH 11/15] Remove CONFIG_HAS_ETH0 et al symbols   Tom Rini
• [PATCH 12/15] Convert CONFIG_ETHPRIME to Kconfig   Tom Rini
• [PATCH 13/15] imx: Convert some boards to DM_ETH   Tom Rini
• [PATCH 14/15] net: fec_mxc: Remove non-DM_ETH code   Tom Rini
• [PATCH 15/15] net: fec_mxc: Drop CONFIG_FEC_XCV_TYPE   Tom Rini
• [PATCH 13/15] imx: Convert some boards to DM_ETH   Tom Rini
• [PATCH v2 03/13] sandbox: start: Sort the header files   Tom Rini
• [PATCH v2 04/13] binman: Expand elf support a little   Tom Rini
• [PATCH v2 05/13] event: Add basic support for events   Tom Rini
• [PATCH v2 06/13] event: Add a simple test   Tom Rini
• [PATCH v2 07/13] event: Set up the event system on start-up   Tom Rini
• [PATCH v2 08/13] event: Add events for device probe/remove   Tom Rini
• [PATCH v2 09/13] event: Convert misc_init_f() to use events   Tom Rini
• [PATCH v2 10/13] event: Convert arch_cpu_init_dm() to use events   Tom Rini
• [PATCH v2 11/13] event: Add a command   Tom Rini
• [PATCH v2 12/13] event: Add a script to decode the event-spy list   Tom Rini
• [PATCH v2 13/13] event: Add documentation   Tom Rini
• [PATCH 02/15] arm: sunxi: Remove most SoC-specific config header files   Tom Rini
• [PATCH 03/15] Convert CONFIG_ARMV8_SWITCH_TO_EL1 to Kconfig   Tom Rini
• [PATCH 02/15] arm: sunxi: Remove most SoC-specific config header files   Tom Rini
• [PATCH] imx8m{m,n}_venice: update env memory layout   Tom Rini
• [PATCH 00/17] arm: semihosting: Cleanups and new features   Tom Rini
• [PATCH v1 1/9] arm: nuvoton: Add support for Nuvoton NPCM845 BMC   Tom Rini
• [PATCH 1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217   Tom Rini
• [PATCH v1 1/9] arm: nuvoton: Add support for Nuvoton NPCM845 BMC   Tom Rini
• [PATCH 1/4] CI: Fix unmigrated symbol test   Tom Rini
• [PATCH 2/4] sunxi: Do not define CONFIG_SPL_STACK_ADDR_R   Tom Rini
• [PATCH 3/4] Revert "efi: Allow easy selection of serial-only operation"   Tom Rini
• [PATCH 4/4] configs: Re-run migrations   Tom Rini
• [PATCH 1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217   Tom Rini
• [PATCH 1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217   Tom Rini
• [v2 01/15] Convert CONFIG_ARMV7_SECURE_BASE et al to Kconfig   Tom Rini
• [v2 02/15] arm: sunxi: Remove SoC-specific config header files   Tom Rini
• [v2 03/15] Convert CONFIG_ARMV8_SWITCH_TO_EL1 to Kconfig   Tom Rini
• [v2 04/15] Convert CONFIG_A003399_NOR_WORKAROUND to Kconfig   Tom Rini
• [v2 05/15] Convert CONFIG_A008044_WORKAROUND to Kconfig   Tom Rini
• [v2 06/15] Convert CONFIG_ARP_TIMEOUT to Kconfig   Tom Rini
• [v2 07/15] Convert CONFIG_NET_RETRY_COUNT to Kconfig   Tom Rini
• [v2 08/15] powerpc: Move CONFIG_BPTR_VIRT_ADDR out of CONFIG namespace   Tom Rini
• [v2 09/15] Convert CONFIG_BOOT_RETRY_TIME et al to Kconfig   Tom Rini
• [v2 10/15] Convert CONFIG_NFS_TIMEOUT to Kconfig   Tom Rini
• [v2 11/15] Remove CONFIG_HAS_ETH0 et al symbols   Tom Rini
• [v2 12/15] Convert CONFIG_ETHPRIME to Kconfig   Tom Rini
• [v2 13/15] imx: Convert some boards to DM_ETH   Tom Rini
• [v2 14/15] net: fec_mxc: Remove non-DM_ETH code   Tom Rini
• [v2 15/15] net: fec_mxc: Drop CONFIG_FEC_XCV_TYPE   Tom Rini
• No u-boot-rockchip pull request sent or merged for v2022.04   Tom Rini
• No u-boot-rockchip pull request sent or merged for v2022.04   Tom Rini
• No u-boot-rockchip pull request sent or merged for v2022.04   Tom Rini
• [PATCH 2/5] tbs2910: Disable ext4 write   Tom Rini
• [PATCH 3/5] rcar3_salvator-x: Drop EFI_LOADER   Tom Rini
• [PATCH 2/5] tbs2910: Disable ext4 write   Tom Rini
• [PATCH 1/8] Convert CONFIG_AM335X_USB0 et al to Kconfig   Tom Rini
• [PATCH 2/8] Convert CONFIG_AT91SAM9260 et al to Kconfig   Tom Rini
• [PATCH 3/8] Convert CONFIG_AT91SAM9G20EK et al to Kconfig   Tom Rini
• [PATCH 4/8] Convert CONFIG_AT91SAM9G10EK et al to Kconfig   Tom Rini
• [PATCH 5/8] atmel: Remove CONFIG_AT91SAM9G45EKES   Tom Rini
• [PATCH 6/8] atmel: Remove CONFIG_AT91SAM9G45_LCD_BASE   Tom Rini
• [PATCH 7/8] Convert CONFIG_AT91_GPIO_PULLUP to Kconfig   Tom Rini
• [PATCH 8/8] Convert CONFIG_ATMEL_LEGACY to Kconfig   Tom Rini
• Pull request: u-boot-spi/master   Tom Rini
• Pull request for efi-2022-04-rc3-2   Tom Rini
• [PATCH 1/5] disk: Add an option for partitions in SPL   Tom Rini
• [PATCH v2 02/13] Makefile: Allow LTO to be disabled for a build   Tom Rini
• [PATCH 3/5] rcar3_salvator-x: Drop EFI_LOADER   Tom Rini
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Tom Rini
• [PATCH] ram: aspeed: Rework kconfig options   Tom Rini
• [PATCH v2 1/3] include: configs: j721e_evm.h: Fix the env variable corresponding to QSGMII PHY init   Tom Rini
• [PATCH v2 2/3] configs: j721e_evm_a72_defconfig: Fix the bootcmd   Tom Rini
• [PATCH v2 3/3] configs: j721e_hs_evm_a72_defconfig: Add command for initializing QSGMII PHY   Tom Rini
• [PATCH 1/4] ARM: omap3_beagle: Remove non-DM initialization   Tom Rini
• [PATCH 2/4] ARM: omap3_beagle: Power on MMC when setting up PMIC   Tom Rini
• [PATCH 3/4] ARM: omap3_beagle: Enable Pinctrl   Tom Rini
• [PATCH 4/4] ARM: omap3_beagle: Enable DM_PMIC and DM_REGULATOR   Tom Rini
• [PATCH] ARM: am3517-evm: Remove more non-DM legacy ethernet reset code   Tom Rini
• [PATCH 1/2] ARM: dts: logicpd-som-lv: Resync DTS files with Linux 5.17-rc5   Tom Rini
• [PATCH 2/2] ARM: omap3_logic: Remove hard-coded USB muxing   Tom Rini
• [PATCH] ARM: dts: logicpd-torpedo: Resyc DTS files with Linux 5.17-rc5   Tom Rini
• [PATCH 1/2] ARM: dts: am3517-evm: Sync DTS with Linux 5.17-rc5   Tom Rini
• [PATCH 2/2] ARM: am3517_evm: Remove hard-coded pin muxing   Tom Rini
• [PATCH v<9>] arm: add initial support for the Phytium Pomelo Board   Tom Rini
• [PATCH] ARM: mach-omap2: omap3: Make clock functions static   Tom Rini
• [PATCH] mmc: xenon_sdhci: remove wait_dat0 SDHCI OP   Tom Rini
• [PATCH 2/2] Add option to use -Og   Tom Rini
• Please pull u-boot-x86   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH v4 2/4] rockchip: sdhci: Fix RK3399 eMMC PHY power cycling   Tom Rini
• [PATCH 1/2] phy: cadence: Sierra: Move the link operations from serdes phy to link device   Tom Rini
• [PATCH 2/2] board: ti: j721e: evm.c: Fix the probing of in Sierra SerDes0   Tom Rini
• [PATCH 01/11] vexpress64: fvp: Fix automatic boot   Tom Rini
• [PATCH 1/2] board: tbs2910: Enable Link Time Optimizations in defconfig   Tom Rini
• [PATCH 2/2] board: tbs2910: Convert to DM_SERIAL   Tom Rini
• [PATCH v2 02/13] Makefile: Allow LTO to be disabled for a build   Tom Rini
• [PATCH 1/5] disk: Add an option for partitions in SPL   Tom Rini
• [PATCH 2/2] board: tbs2910: Convert to DM_SERIAL   Tom Rini
• [PATCH 1/5] disk: Add an option for partitions in SPL   Tom Rini
• [PATCH v2 02/13] Makefile: Allow LTO to be disabled for a build   Tom Rini
• [PATCH v2 02/13] Makefile: Allow LTO to be disabled for a build   Tom Rini
• [ANN] U-Boot v2022.04-rc4 released   Tom Rini
• [PATCH 2/2] board: tbs2910: Convert to DM_SERIAL   Tom Rini
• [PATCH v2 02/13] Makefile: Allow LTO to be disabled for a build   Tom Rini
• Please pull u-boot-video   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• [PATCH] mmc: xenon_sdhci: remove wait_dat0 SDHCI OP   Tom Rini
• [PATCH] dm: Add docs to explain how to enable DM_SERIAL for a board   Tom Rini
• [PATCH v1 0/5] Move board specific files to board directory   Tom Rini
• [PATCH v2] spl: allow boot from first bootable partition   Tom Rini
• [PATCH] CI, Docker: Update to latest focal tag   Tom Rini
• [PATCH v3] spl: allow boot from first bootable partition   Tom Rini
• [PATCH] tbs2910: Convert to DM_SERIAL   Tom Rini
• [PATCH v4 1/5] fs/erofs: add erofs filesystem support   Tom Rini
• [PATCH v4 2/5] lib/lz4: update LZ4 decompressor module   Tom Rini
• [PATCH v4 3/5] fs/erofs: add lz4 decompression support   Tom Rini
• [PATCH v4 4/5] fs/erofs: add filesystem commands   Tom Rini
• [PATCH v4 5/5] test/py: Add tests for the erofs   Tom Rini
• [PATCH] CI, Docker: Update to latest focal tag   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• [PULL] u-boot-riscv/master   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [GIT PULL] Please pull u-boot-mmc master   Tom Rini
• [PATCH v1 0/5] Move board specific files to board directory   Tom Rini
• [PATCH v2 02/13] Makefile: Allow LTO to be disabled for a build   Tom Rini
• [GIT PULL] xilinx patches for v2022.07-rc1   Tom Rini
• [PATCH]armv7: cache: support L2 cache disable   Tom Rini
• [PATCH 01/15] Convert CONFIG_AT91_LED to Kconfig   Tom Rini
• [PATCH 02/15] Convert CONFIG_AT91_WANTS_COMMON_PHY to Kconfig   Tom Rini
• [PATCH 03/15] Convert CONFIG_RESET_PHY_R to Kconfig   Tom Rini
• [PATCH 04/15] Convert CONFIG_SYS_FAULT_ECHO_LINK_DOWN to Kconfig   Tom Rini
• [PATCH 05/15] Convert CONFIG_RMII to Kconfig   Tom Rini
• [PATCH 06/15] Convert CONFIG_TFTP_PORT to Kconfig   Tom Rini
• [PATCH 07/15] Convert CONFIG_LPC32XX_ETH to Kconfig   Tom Rini
• [PATCH 08/15] Convert CONFIG_SYS_RX_ETH_BUFFER to Kconfig   Tom Rini
• [PATCH 09/15] Convert CONFIG_PHY_RESET_DELAY to Kconfig   Tom Rini
• [PATCH 10/15] Convert CONFIG_MII_INIT to Kconfig   Tom Rini
• [PATCH 11/15] Convert CONFIG_ATMEL_LCD et al to Kconfig   Tom Rini
• [PATCH 12/15] Convert CONFIG_LCD_INFO et al to Kconfig   Tom Rini
• [PATCH 13/15] lcd: Remove LCD_TEST_PATTERN code   Tom Rini
• [PATCH 14/15] vinco: Remove CONFIG_ATMEL_SPI0   Tom Rini
• [PATCH 15/15] Convert CONFIG_BACKSIDE_L2_CACHE to Kconfig   Tom Rini
• [v2 02/15] arm: sunxi: Remove SoC-specific config header files   Tom Rini
• [PATCH] patman: Define Commit.path in the constructor   Tom Rini
• Pull request: u-boot-rockchip-20220318   Tom Rini
• [PATCH 1/4] CI: Fix unmigrated symbol test   Tom Rini
• [PATCH 2/4] sunxi: Do not define CONFIG_SPL_STACK_ADDR_R   Tom Rini
• [PATCH 3/4] Revert "efi: Allow easy selection of serial-only operation"   Tom Rini
• [PATCH 4/4] configs: Re-run migrations   Tom Rini
• [v2 01/15] Convert CONFIG_ARMV7_SECURE_BASE et al to Kconfig   Tom Rini
• [v2 03/15] Convert CONFIG_ARMV8_SWITCH_TO_EL1 to Kconfig   Tom Rini
• [v2 04/15] Convert CONFIG_A003399_NOR_WORKAROUND to Kconfig   Tom Rini
• [v2 05/15] Convert CONFIG_A008044_WORKAROUND to Kconfig   Tom Rini
• [v2 06/15] Convert CONFIG_ARP_TIMEOUT to Kconfig   Tom Rini
• [v2 07/15] Convert CONFIG_NET_RETRY_COUNT to Kconfig   Tom Rini
• [v2 08/15] powerpc: Move CONFIG_BPTR_VIRT_ADDR out of CONFIG namespace   Tom Rini
• [v2 09/15] Convert CONFIG_BOOT_RETRY_TIME et al to Kconfig   Tom Rini
• [v2 10/15] Convert CONFIG_NFS_TIMEOUT to Kconfig   Tom Rini
• [v2 11/15] Remove CONFIG_HAS_ETH0 et al symbols   Tom Rini
• [v2 12/15] Convert CONFIG_ETHPRIME to Kconfig   Tom Rini
• [v2 13/15] imx: Convert some boards to DM_ETH   Tom Rini
• [v2 14/15] net: fec_mxc: Remove non-DM_ETH code   Tom Rini
• [v2 15/15] net: fec_mxc: Drop CONFIG_FEC_XCV_TYPE   Tom Rini
• [PATCH 1/8] Convert CONFIG_AM335X_USB0 et al to Kconfig   Tom Rini
• [PATCH 2/8] Convert CONFIG_AT91SAM9260 et al to Kconfig   Tom Rini
• [PATCH 3/8] Convert CONFIG_AT91SAM9G20EK et al to Kconfig   Tom Rini
• [PATCH 4/8] Convert CONFIG_AT91SAM9G10EK et al to Kconfig   Tom Rini
• [PATCH 5/8] atmel: Remove CONFIG_AT91SAM9G45EKES   Tom Rini
• [PATCH 6/8] atmel: Remove CONFIG_AT91SAM9G45_LCD_BASE   Tom Rini
• [PATCH 7/8] Convert CONFIG_AT91_GPIO_PULLUP to Kconfig   Tom Rini
• [PATCH 8/8] Convert CONFIG_ATMEL_LEGACY to Kconfig   Tom Rini
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Tom Rini
• Please pull u-boot-dm/next   Tom Rini
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Tom Rini
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Tom Rini
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Tom Rini
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Tom Rini
• Please pull u-boot-video   Tom Rini
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Tom Rini
• Pull request for efi-2022-04-rc5   Tom Rini
• [PATCH] arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet   Tom Rini
• [PATCH 1/7] am33xx: musb: Remove unused configuration logic   Tom Rini
• [PATCH 2/7] CI: Update unmigrated symbol check   Tom Rini
• [PATCH 3/7] Finish converting CONFIG_BOOTM_NETBSD et al to Kconfig   Tom Rini
• [PATCH 4/7] Convert CONFIG_BCM2835_GPIO to Kconfig   Tom Rini
• [PATCH 5/7] Convert CONFIG_BITBANGMII_MULTI to Kconfig   Tom Rini
• [PATCH 6/7] Remove CONFIG_BOARDNAME and CONFIG_BOARD_NAME   Tom Rini
• [PATCH 7/7] atmel: Remove CONFIG_SPL_ATMEL_SIZE   Tom Rini
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Tom Rini
• [PATCH u-boot-marvell] arm: mvebu: dts: turris_mox: fix non-working USB port   Tom Rini
• [PATCH u-boot-marvell] arm: mvebu: dts: turris_mox: fix non-working USB port   Tom Rini
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Tom Rini
• [PATCH 2/2] arm: add support to corstone1000 platform   Tom Rini
• [PATCH 1/2] cmd: load: add load command for memory mapped   Tom Rini
• [PATCH V3] dt-bindings: nvmem: add U-Boot environment variables binding   Tom Rini
• [PATCH v4 00/33] Initial implementation of standard boot   Tom Rini
• Please pull u-boot-i2c   Tom Rini
• [PATCH] imx8m: Use a sane SYS_MALLOC_F_LEN default   Tom Rini
• [PATCH v2] imx8m: Use a sane SYS_MALLOC_F_LEN default   Tom Rini
• [PATCH v2] imx8m: Use a sane SYS_MALLOC_F_LEN default   Tom Rini
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Tom Rini
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Tom Rini
• [PATCH v4 00/33] Initial implementation of standard boot   Tom Rini
• [PATCH v4 00/33] Initial implementation of standard boot   Tom Rini
• [PATCH v4 00/33] Initial implementation of standard boot   Tom Rini
• [PATCH 01/22] Convert CONFIG_CF_DSPI to Kconfig   Tom Rini
• [PATCH 02/22] Convert CONFIG_MCFTMR to Kconfig   Tom Rini
• [PATCH 03/22] stmark2: Remove CONFIG_SERIAL_FLASH   Tom Rini
• [PATCH 04/22] Convert CONFIG_MCFRTC et al to Kconfig   Tom Rini
• [PATCH 05/22] stmark2: Migrate CONFIG_SYS_EXTRA_OPTIONS to Kconfig   Tom Rini
• [PATCH 06/22] mx28evk_auart_console: Remove CONFIG_SYS_EXTRA_OPTIONS   Tom Rini
• [PATCH 07/22] Convert CONFIG_EMMC_BOOT et al to Kconfig   Tom Rini
• [PATCH 08/22] keymile: Move sourcing of common Kconfig   Tom Rini
• [PATCH 09/22] kmtegr1: Drop CONFIG_KMTEGR1   Tom Rini
• [PATCH 10/22] Convert CONFIG_KM_COGE5UN et al to Kconfig   Tom Rini
• [PATCH 11/22] mpc8548cds: Rework CONFIG_LEGACY usage   Tom Rini
• [PATCH 12/22] Convert CONFIG_LSCHLV2 to Kconfig et al   Tom Rini
• [PATCH 13/22] Convert CONFIG_LPUART et al to Kconfig   Tom Rini
• [PATCH 14/22] MPC837XERDB: Move CONFIG_PCIE to Kconfig   Tom Rini
• [PATCH 15/22] am43xx_evm_qspiboot: Remove CONFIG_SYS_EXTRA_OPTIONS   Tom Rini
• [PATCH 16/22] Convert CONFIG_SDCARD et al to Kconfig   Tom Rini
• [PATCH 17/22] global: Remove CONFIG_SYS_USE_DATAFLASH*   Tom Rini
• [PATCH 18/22] Convert CONFIG_SYS_USE_NORFLASH et al to Kconfig   Tom Rini
• [PATCH 19/22] exynos: Drop CONFIG_CLK_*   Tom Rini
• [PATCH 20/22] Convert CONFIG_CLOCK_SYNTHESIZER to Kconfig   Tom Rini
• [PATCH 21/22] Convert CONFIG_CLOCKS to Kconfig   Tom Rini
• [PATCH 22/22] p1_p2_rdb: Remove CONFIG_CPLD_[BO]R_PRELIM   Tom Rini
• [PATCH 1/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   Tom Rini
• [PATCH v4 00/33] Initial implementation of standard boot   Tom Rini
• [PATCH-next] include: configs: at91/sam: remove stray #ifdef/#else   Tom Rini
• [PATCH 1/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   Tom Rini
• [PATCH v4 00/33] Initial implementation of standard boot   Tom Rini
• [PATCH-next] include: configs: at91/sam: remove stray #ifdef/#else   Tom Rini
• [PATCH v4 00/33] Initial implementation of standard boot   Tom Rini
• [PATCH 01/11] db-mv784mp-gp: Rename CONFIG_DB_784MP_GP to CONFIG_TARGET_DB_MV784MP_GP   Tom Rini
• [PATCH 02/11] M5329EVB, M5373EVB: Remove CONFIG_NANDFLASH_SIZE   Tom Rini
• [PATCH 03/11] Convert CONFIG_DEEP_SLEEP to Kconfig   Tom Rini
• [PATCH 04/11] exynos: Drop CONFIG_DEVICE_TREE_LIST   Tom Rini
• [PATCH 05/11] mx53loco: Convert CONFIG_DIALOG_POWER to Kconfig   Tom Rini
• [PATCH 06/11] Convert CONFIG_E300 et al to Kconfig   Tom Rini
• [PATCH 07/11] Convert CONFIG_SRIO_PCIE_BOOT_SLAVE to Kconfig   Tom Rini
• [PATCH 08/11] at91: Switch to SD_BOOT / CONFIG_NAND_BOOT   Tom Rini
• [PATCH 09/11] Convert CONFIG_NORFLASH_PS32BIT to Kconfig   Tom Rini
• [PATCH 10/11] Convert CONFIG_SYS_MONITOR_BASE to Kconfig   Tom Rini
• [PATCH 11/11] global: Remove CONFIG_SYS_EXTRA_OPTIONS support   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH] CI: Pin pylint version to 2.12.2   Tom Rini
• [PATCH 1/1] doc: update doc/sphinx/requirements.txt   Tom Rini
• [PATCH] CI: Pin pylint version to 2.12.2   Tom Rini
• ubifs: fix journal replay wrt. xattr nodes   Tom Rini
• [PATCH 01/15] Convert CONFIG_AT91_LED to Kconfig   Tom Rini
• [PATCH 02/15] Convert CONFIG_AT91_WANTS_COMMON_PHY to Kconfig   Tom Rini
• [PATCH 03/15] Convert CONFIG_RESET_PHY_R to Kconfig   Tom Rini
• [PATCH 04/15] Convert CONFIG_SYS_FAULT_ECHO_LINK_DOWN to Kconfig   Tom Rini
• [PATCH 05/15] Convert CONFIG_RMII to Kconfig   Tom Rini
• [PATCH 06/15] Convert CONFIG_TFTP_PORT to Kconfig   Tom Rini
• [PATCH 07/15] Convert CONFIG_LPC32XX_ETH to Kconfig   Tom Rini
• [PATCH 08/15] Convert CONFIG_SYS_RX_ETH_BUFFER to Kconfig   Tom Rini
• [PATCH 09/15] Convert CONFIG_PHY_RESET_DELAY to Kconfig   Tom Rini
• [PATCH 10/15] Convert CONFIG_MII_INIT to Kconfig   Tom Rini
• [PATCH 11/15] Convert CONFIG_ATMEL_LCD et al to Kconfig   Tom Rini
• [PATCH 12/15] Convert CONFIG_LCD_INFO et al to Kconfig   Tom Rini
• [PATCH 13/15] lcd: Remove LCD_TEST_PATTERN code   Tom Rini
• [PATCH 14/15] vinco: Remove CONFIG_ATMEL_SPI0   Tom Rini
• [PATCH 15/15] Convert CONFIG_BACKSIDE_L2_CACHE to Kconfig   Tom Rini
• [PATCH v4 00/33] Initial implementation of standard boot   Tom Rini
• [PATCH v7 14/16] test: py: vboot: add test for global image signature   Tom Rini
• [1/3] pinctrl: mediatek: rewrite mtk_pinconf_set and related functions   Tom Rini
• [PATCH v7 14/16] test: py: vboot: add test for global image signature   Tom Rini
• [PATCH 1/2] sandbox: video: Replace PCI_CLASS_* macros by one from pci_ids.h   Tom Rini
• [PATCH 2/2] pci: Remove duplicate PCI_CLASS_CODE_* and PCI_CLASS_SUB_CODE_* macros   Tom Rini
• [PATCH] pci: Add defines for normal and subtractive PCI bridges   Tom Rini
• [PATCH 1/2] Split CONFIG_CC_OPTIMIZE_FOR_SIZE into two configs   Tom Rini
• [PATCH 2/2] Add option to use -Og   Tom Rini
• [PATCH] cmd: test: pinmux: Do not check all empty spaces   Tom Rini
• [PATCH 1/3] pwm: Add Aspeed ast2600 PWM support   Tom Rini
• [PATCH 2/3] pinctrl: Add the pinctrl setting for PWM.   Tom Rini
• [PATCH 3/3] ARM: dts: ast2600: Add PWM to device tree   Tom Rini
• [PATCH 1/5] disk: Add an option for partitions in SPL   Tom Rini
• [PATCH v2 1/2] power: pfuze100: Add MEMx register definitions   Tom Rini
• [PATCH v2 2/2] bootcount: Add pmic pfuze100 bootcount driver   Tom Rini
• Pull request: u-boot-sunxi/master fix for v2022.04   Tom Rini
• [PATCH v4 00/33] Initial implementation of standard boot   Tom Rini
• Pull request for efi-2022-04-rc5-2   Tom Rini
• [PATCH v2 7/9] Make EFI_LOADER depend on DM and OF_CONTROL   Tom Rini
• [PATCH v2] boot: image: fixup zstd decompression buffer initialization typo   Tom Rini
• [PATCH] arm: apple: Increase RTKit timeout   Tom Rini
• [PATCH] arm: apple: Fix mem layout   Tom Rini
• [PATCH v4] mtd: gpmi: fix the bch setting backward compatible issue   Tom Rini
• [PATCH] Makefile: add drivers/video/u_boot_logo.S to clean   Tom Rini
• [PATCH] Fix URLs to old freescale git repos   Tom Rini
• [ANN] U-Boot v2022.04-rc5 released   Tom Rini
• [ANN] U-Boot v2022.04-rc5 released   Tom Rini
• [ANN] U-Boot v2022.04-rc5 released   Tom Rini
• [PATCH v3 16/29] serial: Add semihosting driver   Tom Rini
• [ANN] U-Boot v2022.04-rc5 released   Tom Rini
• [ANN] U-Boot v2022.04-rc5 released   Tom Rini
• [PATCH] imx: ventana: enable ONFI detection to fix NAND chip configuration   Tom Rini
• [PATCH] imx: ventana: enable ONFI detection to fix NAND chip configuration   Tom Rini
• [PATCH] video: Do not show splash and U-Boot logo simultaneously   Tom Rini
• [PULL] u-boot-socfpga/master   Tom Rini
• Please pull u-boot-video/next   Tom Rini
• [PATCH v4 00/33] Initial implementation of standard boot   Tom Rini
• Broken P2020 board since commit be7dbb60c5bf ("Convert CONFIG_SYS_IMMR to Kconfig")   Tom Rini
• Broken P2020 board since commit be7dbb60c5bf ("Convert CONFIG_SYS_IMMR to Kconfig")   Tom Rini
• [PATCH] powerpc: Fix incorrect SYS_IMMR migration values   Tom Rini
• [PATCH 01/25] Convert CONFIG_BOARD_SIZE_LIMIT to Kconfig   Tom Rini
• [PATCH 02/25] mvebu: Move BOOTROM_ERR_REG out of CONFIG namespace   Tom Rini
• [PATCH 03/25] tegra: Migrate CI_UDC_HAS_HOSTPC to Kconfig   Tom Rini
• [PATCH 04/25] Convert CONFIG_CMDLINE_PS_SUPPORT to Kconfig   Tom Rini
• [PATCH 05/25] arm: integrator: Migrate platform-specific options and cleanup armcoremodule.h   Tom Rini
• [PATCH 06/25] s5p_goni, smdkc100: Move some environment settings out of CONFIG   Tom Rini
• [PATCH 07/25] MPC837XERDB: Stop using CONFIG_RAMDISKFILE   Tom Rini
• [PATCH 08/25] corvus: Migrate CONFIG_*_LED out of CONFIG namespace   Tom Rini
• [PATCH 09/25] stm32f429-discovery: Migrate CONFIG_*_LED out of CONFIG namespace   Tom Rini
• [PATCH 10/25] at91: Remove unused LED code   Tom Rini
• [PATCH 11/25] Convert CONFIG_CONS_SCIF0 et al to Kconfig   Tom Rini
• [PATCH 12/25] Convert CONFIG_SH_SCIF_CLK_FREQ to Kconfig   Tom Rini
• [PATCH 13/25] spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to Kconfig   Tom Rini
• [PATCH 14/25] controlcenterdc: Migrate CUSTOMER_BOARD_SUPPORT to Kconfig   Tom Rini
• [PATCH 15/25] tegra: Drop CONFIG_CHROMEOS_EXTRA_ENV_SETTINGS   Tom Rini
• [PATCH 16/25] microblaze: Migrate DCACHE/ICACHE to Kconfig   Tom Rini
• [PATCH 17/25] ls1021atwr: Use DEBUG and not CONFIG_DEBUG   Tom Rini
• [PATCH 18/25] nds32: Migrate CONFIG_DEBUG_LED to Kconfig   Tom Rini
• [PATCH 19/25] powerpc: mpc83xx: Migrate DEFAULT_IMMR to Kconfig   Tom Rini
• [PATCH 20/25] galileo: Remove CONFIG_DESIGNWARE_ETH reference   Tom Rini
• [PATCH 21/25] Convert CONFIG_DIMM_SLOTS_PER_CTLR to Kconfig   Tom Rini
• [PATCH 22/25] Convert CONFIG_FSL_QIXIS et al to Kconfig   Tom Rini
• [PATCH 23/25] m53menlo: Drop CONFIG_DISCOVER_PHY   Tom Rini
• [PATCH 24/25] siemens-am33x-common: Drop CONFIG_DMA_COHERENT*   Tom Rini
• [PATCH 25/25] arm: fsl-layerscape: Migrate more DP-DDR options to Kconfig   Tom Rini
• Please pull clk-2022.04-next   Tom Rini
• [PATCH] board: gw_ventana: gsc: fix GSC read/write functions   Tom Rini
• [PATCH v2] board: gateworks: venice: determine dram size at runtime   Tom Rini
• [PATCH v1 1/1] Revert "x86: Move FACP table into separate functions"   Tom Rini
• [PATCH] video: Do not show splash and U-Boot logo simultaneously   Tom Rini
• [PATCH 1/1] Makefile: make clean should delete include/generated/env.in   Tom Rini
• [PATCH] powerpc: Fix incorrect SYS_IMMR migration values   Tom Rini
• [PATCH 13/25] spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to Kconfig   Tom Rini
• [PATCH 01/10] net: Remove armada100_fec driver   Tom Rini
• [PATCH 02/10] net: Remove ax88180 driver   Tom Rini
• [PATCH 03/10] net: Remove cs8900 driver   Tom Rini
• [PATCH 04/10] net: Remove dnet driver   Tom Rini
• [PATCH 05/10] net: Remove ftmac110 driver   Tom Rini
• [PATCH 06/10] net: Remove lan91c96 driver   Tom Rini
• [PATCH 07/10] net: Remove natsemi driver   Tom Rini
• [PATCH 08/10] net: Remove ns8382x driver   Tom Rini
• [PATCH 09/10] net: Remove uli526x driver   Tom Rini
• [PATCH 10/10] arm: Remove unused ep93xx code   Tom Rini
• [v2 13/25] spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to Kconfig   Tom Rini
• [ANN] U-Boot v2022.04-rc5 released   Peter Robinson
• [ANN] U-Boot v2022.04-rc5 released   Peter Robinson
• [PATCH u-boot-marvell] arm: a37xx: pci: Fix a3700_fdt_fix_pcie_regions() function again   Stefan Roese
• [PATCH u-boot-mvebu] watchdog: armada_37xx: Probe driver also when watchdog is already running   Stefan Roese
• [PATCH] .mailmap: Record all address for main U-Boot contributor   Stefan Roese
• [PATCH] ARM: mvebu: x530: clearfog: Add ODT configuration   Stefan Roese
• [PATCH u-boot-marvell] arm64: a37xx: pinctrl: Fix PWM pins indexes   Stefan Roese
• [PATCH] arm: kirkwood: nas220: Add DM Ethernet, SATA, GPIO   Stefan Roese
• [PATCH] drivers: rtc: fix null pointer access in armada38x_rtc_reset   Stefan Roese
• [PATCH u-boot-marvell 00/10] tools: kwboot: Fix boot and terminal mode   Stefan Roese
• [PATCH u-boot-marvell 01/10] tools: kwboot: Check for return value of kwboot_tty_send() and tcflush()   Stefan Roese
• [PATCH u-boot-marvell 02/10] tools: kwboot: Remove msg_req_delay   Stefan Roese
• [PATCH u-boot-marvell 03/10] tools: kwboot: Cleanup bootmsg and debugmsg variables   Stefan Roese
• [PATCH u-boot-marvell 04/10] tools: kwboot: Use separate thread for sending boot message pattern   Stefan Roese
• [PATCH u-boot-marvell 05/10] tools: kwboot: Fix sending and processing debug message pattern (-d option)   Stefan Roese
• [PATCH u-boot-marvell 06/10] tools: kwboot: Add support for backspace key in mini terminal   Stefan Roese
• [PATCH u-boot-marvell 07/10] tools: kwboot: Update usage   Stefan Roese
• [PATCH u-boot-marvell 08/10] tools: kwboot: Update manpage   Stefan Roese
• [PATCH u-boot-marvell 09/10] tools: kwboot: Update doc about Avanta   Stefan Roese
• [PATCH u-boot-marvell 10/10] tools: kwboot: Update references with public links   Stefan Roese
• [PATCH] tools: kwboot: Fix quitting terminal   Stefan Roese
• [PATCH 1/2] pci: pci_mvebu: Remove unused SELECT and lane_mask   Stefan Roese
• [PATCH 2/2] pci: pci_mvebu: Cleanup macro names   Stefan Roese
• [PATCH u-boot-marvell] arm: mvebu: turris_omnia: Enable ext4 write support in defconfig   Stefan Roese
• [PATCH u-boot-marvell] arm: a37xx: pci: Fix a3700_fdt_fix_pcie_regions() function again   Stefan Roese
• [PATCH] drivers: rtc: fix null pointer access in armada38x_rtc_reset   Stefan Roese
• [PATCH u-boot-marvell] arm64: a37xx: pinctrl: Fix PWM pins indexes   Stefan Roese
• [PATCH] ARM: mvebu: x530: clearfog: Add ODT configuration   Stefan Roese
• [PATCH u-boot-marvell 00/10] tools: kwboot: Fix boot and terminal mode   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH] tools: kwboot: Allow to specify custom baudrate only in supported operations   Stefan Roese
• kwboot - positional tty argument   Stefan Roese
• [PATCH] drivers: watchdog: wdt-uclass.c: add a property u-boot, noautostart   Stefan Roese
• [PATCH] drivers: watchdog: wdt-uclass.c: add a property u-boot, noautostart   Stefan Roese
• [PATCH] MAINTAINERS: Add watchdog maintainers entry   Stefan Roese
• [PATCH u-boot-mvebu] watchdog: armada_37xx: Probe driver also when watchdog is already running   Stefan Roese
• [PATCH] watchdog: rti_wdt: Add 10% safety margin to clock frequency   Stefan Roese
• Please pull u-boot-watchdog/master   Stefan Roese
• [PATCH u-boot-mvebu v3 0/5] arm: mvebu: a37xx: Add support for reading OTP   Stefan Roese
• [PATCH v2 1/3] tools: kwboot: Allow to specify custom baudrate only in supported operations   Stefan Roese
• [PATCH v2 2/3] tools: kwboot: Check if baudrate value is supported before sending image   Stefan Roese
• [PATCH v2 3/3] tools: kwboot: Allow to mix positional arguments with option -b   Stefan Roese
• [PATCH] arm: a37xx: Remap IO space to bus address 0x0   Stefan Roese
• [PATCH] arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet   Stefan Roese
• [PATCH v2 3/3] tools: kwboot: Allow to mix positional arguments with option -b   Stefan Roese
• [PATCH v2 1/1] wdt: nuvoton: Add support for Nuvoton   Stefan Roese
• [PATCH] doc: device-tree-bindings: watchdog: document common properties   Stefan Roese
• [PATCH v3] wdt: nuvoton: Add support for Nuvoton   Stefan Roese
• [PATCH] mmc: xenon_sdhci: remove wait_dat0 SDHCI OP   Stefan Roese
• [PATCH v2 1/3] tools: kwboot: Allow to specify custom baudrate only in supported operations   Stefan Roese
• [PATCH v2 2/3] tools: kwboot: Check if baudrate value is supported before sending image   Stefan Roese
• [PATCH v2 3/3] tools: kwboot: Allow to mix positional arguments with option -b   Stefan Roese
• [PATCH] arm: a37xx: Remap IO space to bus address 0x0   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH] net: phy: marvell: Finalize errata section 5.1 for Alaska PHY   Stefan Roese
• [PATCH u-boot-marvell] arm: mvebu: dts: turris_mox: fix non-working network / MDIO   Stefan Roese
• [PATCH u-boot-marvell] arm: mvebu: dts: turris_mox: fix non-working network / MDIO   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH u-boot-net 08/14] treewide: Rename PHY_INTERFACE_MODE_COUNT to PHY_INTERFACE_MODE_MAX   Stefan Roese
• [PATCH u-boot-net 09/14] treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA   Stefan Roese
• [PATCH u-boot-net 10/14] phy: Move PHY_INTERFACE_MODE_NA to the beginning of the enum definition   Stefan Roese
• [PATCH v3] arm: kirkwood: nas220: Add DM Ethernet, SATA, GPIO   Stefan Roese
• [PATCH] arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet   Stefan Roese
• [PATCH] arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet   Stefan Roese
• [PATCH u-boot-marvell] arm: mvebu: dts: turris_mox: fix non-working USB port   Stefan Roese
• [PATCH u-boot-marvell] arm: mvebu: dts: turris_mox: fix non-working USB port   Stefan Roese
• [PATCH] arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet   Stefan Roese
• [PATCH u-boot-marvell] arm: a37xx: espressobin: Fix non-working SPI   Stefan Roese
• [PATCH u-boot-marvell] arm: a37xx: espressobin: Fix non-working SPI   Stefan Roese
• [PATCH u-boot-marvell v2] arm: a37xx: espressobin: Fix non-working SPI   Stefan Roese
• [PATCH u-boot-marvell] arm: a37xx: espressobin: Fix non-working SPI   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH] doc: man-page for the wdt command   Stefan Roese
• [PATCH 01/11] db-mv784mp-gp: Rename CONFIG_DB_784MP_GP to CONFIG_TARGET_DB_MV784MP_GP   Stefan Roese
• [PATCH 1/2] net: phy: marvell: Support reg config via "marvell, reg-init" DT property   Stefan Roese
• [PATCH 2/2] net: phy: marvell: Add support for 88E1240 PHY   Stefan Roese
• [PATCH 00/52] mips: octeon: Add ethernet support   Stefan Roese
• [PATCH 01/52] mips: octeon: Add misc cvmx-* header files   Stefan Roese
• [PATCH 02/52] mips: octeon: Add cvmx-ilk-defs.h header file   Stefan Roese
• [PATCH 03/52] mips: octeon: Add cvmx-iob-defs.h header file   Stefan Roese
• [PATCH 04/52] mips: octeon: Add cvmx-lbk-defs.h header file   Stefan Roese
• [PATCH 05/52] mips: octeon: Add cvmx-npei-defs.h header file   Stefan Roese
• [PATCH 06/52] mips: octeon: Add cvmx-pcsxx-defs.h header file   Stefan Roese
• [PATCH 07/52] mips: octeon: Add cvmx-xcv-defs.h header file   Stefan Roese
• [PATCH 08/52] mips: octeon: Misc changes to existing headers for upcoming eth support   Stefan Roese
• [PATCH 09/52] mips: octeon: Add cvmx-helper-agl.c   Stefan Roese
• [PATCH 10/52] mips: octeon: Add cvmx-helper-bgx.c   Stefan Roese
• [PATCH 11/52] mips: octeon: Add cvmx-helper-board.c   Stefan Roese
• [PATCH 12/52] mips: octeon: Add cvmx-helper-fpa.c   Stefan Roese
• [PATCH 13/52] mips: octeon: Add cvmx-helper-igl.c   Stefan Roese
• [PATCH 14/52] mips: octeon: Add cvmx-helper-ipd.c   Stefan Roese
• [PATCH 15/52] mips: octeon: Add cvmx-helper-loop.c   Stefan Roese
• [PATCH 17/52] mips: octeon: Add cvmx-helper-pki.c   Stefan Roese
• [PATCH 18/52] mips: octeon: Add cvmx-helper-pko.c   Stefan Roese
• [PATCH 19/52] mips: octeon: Add cvmx-helper-pko3.c   Stefan Roese
• [PATCH 20/52] mips: octeon: Add cvmx-helper-rgmii.c   Stefan Roese
• [PATCH 21/52] mips: octeon: Add cvmx-helper-sgmii.c   Stefan Roese
• [PATCH 22/52] mips: octeon: Add cvmx-helper-sfp.c   Stefan Roese
• [PATCH 24/52] mips: octeon: Add cvmx-agl.c   Stefan Roese
• [PATCH 25/52] mips: octeon: Add cvmx-cmd-queue.c   Stefan Roese
• [PATCH 26/52] mips: octeon: Add cvmx-fau-compat.c   Stefan Roese
• [PATCH 28/52] mips: octeon: Add cvmx-fpa-resource.c   Stefan Roese
• [PATCH 29/52] mips: octeon: Add cvmx-global-resource.c   Stefan Roese
• [PATCH 30/52] mips: octeon: Add cvmx-ilk.c   Stefan Roese
• [PATCH 31/52] mips: octeon: Add cvmx-ipd.c   Stefan Roese
• [PATCH 32/52] mips: octeon: Add cvmx-pki.c   Stefan Roese
• [PATCH 34/52] mips: octeon: Add cvmx-pko.c   Stefan Roese
• [PATCH 35/52] mips: octeon: Add cvmx-pko3.c   Stefan Roese
• [PATCH 36/52] mips: octeon: Add cvmx-pko3-queue.c   Stefan Roese
• [PATCH 37/52] mips: octeon: Add cvmx-pko3-compat.c   Stefan Roese
• [PATCH 38/52] mips: octeon: Add cvmx-pko3-resources.c   Stefan Roese
• [PATCH 39/52] mips: octeon: Add cvmx-pko-internal-ports-range.c   Stefan Roese
• [PATCH 40/52] mips: octeon: Add cvmx-qlm-tables.c   Stefan Roese
• [PATCH 41/52] mips: octeon: Add cvmx-range.c   Stefan Roese
• [PATCH 42/52] mips: octeon: Misc changes to existing C files for upcoming eth support   Stefan Roese
• [PATCH 43/52] mips: octeon: Makefile: Enable building of the newly added C files   Stefan Roese
• [PATCH 44/52] mips: octeon: cpu.c: Move bootmem init to arch_early_init_r()   Stefan Roese
• [PATCH 45/52] mips: octeon: cpu.c: Implement configure_lmtdma_window()   Stefan Roese
• [PATCH 46/52] mips: octeon: octeon_common.h: Move init SP because of increased image size   Stefan Roese
• [PATCH 47/52] mips: octeon: mrvl, cn73xx.dtsi: Add ethernet (BGX) and SMI DT nodes   Stefan Roese
• [PATCH 48/52] mips: octeon: mrvl, octeon-ebb7304.dts: Add ethernet DT support   Stefan Roese
• [PATCH 49/52] mips: octeon: mrvl, octeon-nic23.dts: Add ethernet DT support   Stefan Roese
• [PATCH 50/52] net: Add ethernet support for MIPS Octeon   Stefan Roese
• [PATCH 51/52] mips: octeon: ebb7304: Enable ethernet support   Stefan Roese
• [PATCH 52/52] mips: octeon: nic23: Enable ethernet support   Stefan Roese
• [PATCH 00/52] mips: octeon: Add ethernet support   Stefan Roese
• [PATCH 1/2] net: phy: marvell: Support reg config via "marvell, reg-init" DT property   Stefan Roese
• [PATCH 00/52] mips: octeon: Add ethernet support   Stefan Roese
• [PATCH 02/25] mvebu: Move BOOTROM_ERR_REG out of CONFIG namespace   Stefan Roese
• [PATCH 14/25] controlcenterdc: Migrate CUSTOMER_BOARD_SUPPORT to Kconfig   Stefan Roese
• [PATCH v2 1/2] net: phy: marvell: Support reg config via "marvell, reg-init" DT property   Stefan Roese
• [PATCH v2 2/2] net: phy: marvell: Add support for 88E1240 PHY   Stefan Roese
• [PATCH u-boot-marvell 00/10] tools: kwboot: Fix boot and terminal mode   Pali Rohár
• [PATCH u-boot-marvell 01/10] tools: kwboot: Check for return value of kwboot_tty_send() and tcflush()   Pali Rohár
• [PATCH u-boot-marvell 02/10] tools: kwboot: Remove msg_req_delay   Pali Rohár
• [PATCH u-boot-marvell 03/10] tools: kwboot: Cleanup bootmsg and debugmsg variables   Pali Rohár
• [PATCH u-boot-marvell 04/10] tools: kwboot: Use separate thread for sending boot message pattern   Pali Rohár
• [PATCH u-boot-marvell 05/10] tools: kwboot: Fix sending and processing debug message pattern (-d option)   Pali Rohár
• [PATCH u-boot-marvell 06/10] tools: kwboot: Add support for backspace key in mini terminal   Pali Rohár
• [PATCH u-boot-marvell 07/10] tools: kwboot: Update usage   Pali Rohár
• [PATCH u-boot-marvell 08/10] tools: kwboot: Update manpage   Pali Rohár
• [PATCH u-boot-marvell 09/10] tools: kwboot: Update doc about Avanta   Pali Rohár
• [PATCH u-boot-marvell 10/10] tools: kwboot: Update references with public links   Pali Rohár
• [PATCH u-boot-marvell 0/8] Turris Omnia: Add support for configuring mSATA and WWAN slots via env variables   Pali Rohár
• [PATCH u-boot-marvell 1/8] env: sf: Allow to use env_sf_init_addr() at any stage   Pali Rohár
• [PATCH u-boot-marvell 2/8] arm: mvebu: turris_omnia: Provide env_sf_get_env_addr() function   Pali Rohár
• [PATCH u-boot-marvell 3/8] arm: mvebu: turris_omnia: Enable ENV support in SPL   Pali Rohár
• [PATCH u-boot-marvell 4/8] arm: mvebu: turris_omnia: Define only one serdes map variable   Pali Rohár
• [PATCH u-boot-marvell 5/8] arm: mvebu: turris_omnia: Allow to configure mSATA slot via env variable   Pali Rohár
• [PATCH u-boot-marvell 6/8] arm: mvebu: turris_omnia: Extract code for disabling sata/pcie   Pali Rohár
• [PATCH u-boot-marvell 7/8] arm: mvebu: turris_omnia: Signal error when sata/pcie DT mode   Pali Rohár
• [PATCH u-boot-marvell 8/8] arm: mvebu: turris_omnia: Add support for USB3.0 mode in WWAN MiniPCIe slot   Pali Rohár
• [PATCH u-boot-marvell 00/10] tools: kwboot: Fix boot and terminal mode   Pali Rohár
• [PATCH u-boot-marvell 00/10] tools: kwboot: Fix boot and terminal mode   Pali Rohár
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Pali Rohár
• [PATCH] WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO   Pali Rohár
• [PATCH] tools: kwboot: Allow to specify custom baudrate only in supported operations   Pali Rohár
• [PATCH] tools: kwboot: Check if baudrate value is supported before sending image   Pali Rohár
• [PATCH] WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO   Pali Rohár
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_VIDEO   Pali Rohár
• [PATCH] WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO   Pali Rohár
• kwboot - positional tty argument   Pali Rohár
• kwboot - positional tty argument   Pali Rohár
• [PATCH v2 1/3] tools: kwboot: Allow to specify custom baudrate only in supported operations   Pali Rohár
• [PATCH v2 2/3] tools: kwboot: Check if baudrate value is supported before sending image   Pali Rohár
• [PATCH v2 3/3] tools: kwboot: Allow to mix positional arguments with option -b   Pali Rohár
• [PATCH] arm: a37xx: Remap IO space to bus address 0x0   Pali Rohár
• [PATCH u-boot-mvebu v3 0/5] arm: mvebu: a37xx: Add support for reading OTP   Pali Rohár
• [PATCH] Nokia RX-51: Update documentation about QEMU   Pali Rohár
• [PATCH v2 3/3] tools: kwboot: Allow to mix positional arguments with option -b   Pali Rohár
• [PATCH] Nokia RX-51: Convert to CONFIG_DM_VIDEO   Pali Rohár
• [PATCH] WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO   Pali Rohár
• [PATCH v2 1/2] video: Allow drivers to allocate the frame buffer themselves   Pali Rohár
• [PATCH v2 2/2] Nokia RX-51: Convert to CONFIG_DM_VIDEO   Pali Rohár
• [PATCH] mmc: xenon_sdhci: remove wait_dat0 SDHCI OP   Pali Rohár
• [PATCH] WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO   Pali Rohár
• [PATCH] WIP: Nokia RX-51: Convert to CONFIG_DM_VIDEO   Pali Rohár
• [PATCH u-boot-marvell] arm: mvebu: dts: turris_mox: fix non-working network / MDIO   Pali Rohár
• [PATCH u-boot-marvell] arm: mvebu: dts: turris_mox: fix non-working USB port   Pali Rohár
• [PATCH u-boot-marvell] arm: a37xx: espressobin: Fix non-working SPI   Pali Rohár
• [PATCH u-boot-marvell] arm: a37xx: espressobin: Fix non-working SPI   Pali Rohár
• [PATCH u-boot-marvell v2] arm: a37xx: espressobin: Fix non-working SPI   Pali Rohár
• [PATCH] arm: kirkwood: Add nas440 board, Marvell 88SE6121 AHCI   Pali Rohár
• [PATCH 00/14] video: Drop old CFB code   Pali Rohár
• [PATCH] Fix URLs to old freescale git repos   Pali Rohár
• [PATCH] arm: kirkwood: Add nas440 board, Marvell 88SE6121 AHCI   Pali Rohár
• [PATCH] arm: kirkwood: Add nas440 board, Marvell 88SE6121 AHCI   Pali Rohár
• [PATCH] ahci: add PCI bindings for Marvell 88SE6121/45 SATA controllers   Pali Rohár
• [PATCH] arm: kirkwood: Add nas440 board, Marvell 88SE6121 AHCI   Pali Rohár
• Broken P2020 board since commit be7dbb60c5bf ("Convert CONFIG_SYS_IMMR to Kconfig")   Pali Rohár
• Broken P2020 board since commit be7dbb60c5bf ("Convert CONFIG_SYS_IMMR to Kconfig")   Pali Rohár
• Broken P2020 board since commit be7dbb60c5bf ("Convert CONFIG_SYS_IMMR to Kconfig")   Pali Rohár
• [PATCH] powerpc: Fix incorrect SYS_IMMR migration values   Pali Rohár
• [PATCH] cmd: gpio: Add `gpio read` subcommand   Diego Rondini
• [PATCH 0/3] Support any-salt for padding pss verification   SESA644425
• [PATCH 1/3] lib: rsa: Fix const-correctness of rsassa_pss functions   SESA644425
• [PATCH 2/3] lib: rsa: Leverage existing data buffer instead of systematic copy   SESA644425
• [PATCH 3/3] lib: rsa: Update function padding_pss_verify (any-salt)   SESA644425
• [PATCH] efi_loader: optional persistence of variables   Tom Saeger
• [PATCH] efi_loader: optional persistence of variables   Tom Saeger
• [PATCH] efi_loader: optional persistence of variables   Tom Saeger
• [PATCH] efi_loader: optional persistence of variables   Tom Saeger
• [PATCH 11/15] Remove CONFIG_HAS_ETH0 et al symbols   Heiko Schocher
• [PATCH] i2c: fix always-true condition in i2c_probe_chip()   Heiko Schocher
• [PATCH] cmd: eeprom: Do not rewrite EEPROM I2C bus with DM I2C enabled   Heiko Schocher
• [PATCH] bootcount: clarify documentation   Heiko Schocher
• [PATCH] i2c: fix always-true condition in i2c_probe_chip()   Heiko Schocher
• [PATCH] cmd: eeprom: Do not rewrite EEPROM I2C bus with DM I2C enabled   Heiko Schocher
• [PATCH] bootcount: clarify documentation   Heiko Schocher
• Please pull u-boot-i2c   Heiko Schocher
• [PATCH 09/22] kmtegr1: Drop CONFIG_KMTEGR1   Heiko Schocher
• [PATCH 08/25] corvus: Migrate CONFIG_*_LED out of CONFIG namespace   Heiko Schocher
• GPMI NAND Regression on i.MX6S   Frieder Schrempf
• GPMI NAND Regression on i.MX6S   Frieder Schrempf
• GPMI NAND Regression on i.MX6S   Frieder Schrempf
• GPMI NAND Regression on i.MX6S   Frieder Schrempf
• [EXT] [PATCH] mtd: mxs_nand: default to legacy bch and rename to modern bch option   Frieder Schrempf
• [EXT] [PATCH] mtd: mxs_nand: default to legacy bch and rename to modern bch option   Frieder Schrempf
• [EXT] [PATCH] mtd: mxs_nand: default to legacy bch and rename to modern bch option   Frieder Schrempf
• [PATCH 1/1] mkimage: error handling for FIT image   Heinrich Schuchardt
• [PATCH] lib: rsa: use actual OpenSSL 1.1.0 EVP MD API   Heinrich Schuchardt
• [PATCH 2/2] efi_loader: use short-form DP for load options   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: remove efi_disk_is_system_part()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: remove efi_disk_is_system_part()   Heinrich Schuchardt
• [PATCH] board: .gitignore: replace dsdt.c by dsdt_generated.c   Heinrich Schuchardt
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Heinrich Schuchardt
• [PATCH v2 00/13] event: Provide support for events to connect subsystems   Heinrich Schuchardt
• [PATCH v2 01/13] phy: nop-phy: Fix phy reset if no reset-gpio defined   Heinrich Schuchardt
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Heinrich Schuchardt
• [PATCH v3 01/19] scsi: call device_probe() after scanning   Heinrich Schuchardt
• Porting U-Boot's UEFI Payload to coreboot   Heinrich Schuchardt
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Heinrich Schuchardt
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Heinrich Schuchardt
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: copy GUID in InstallProtocolInterface()   Heinrich Schuchardt
• [PATCH 1/1] doc: path to u-boot-spl.bin on SiFive Unmatched board   Heinrich Schuchardt
• [PATCH v2 1/1] cmd: add serial console support for the cls command   Heinrich Schuchardt
• [PATCH 1/1] doc: add libgnutls28-dev to build dependencies   Heinrich Schuchardt
• [PATCH v2 1/1] cmd: add serial console support for the cls command   Heinrich Schuchardt
• Pull request for efi-2022-04-rc3-2   Heinrich Schuchardt
• [PATCH] lib/acpi: Enable QEMU special cases for ARM   Heinrich Schuchardt
• [PATCH] efi_loader: Use sysreset instead of reset command   Heinrich Schuchardt
• [PATCH] doc: board: raspberrypi: Add documentation   Heinrich Schuchardt
• [PATCH] efi_loader: Use sysreset instead of reset command   Heinrich Schuchardt
• [PATCH] doc: uefi: Fix reference to CONFIG_EFI_SECURE_BOOT   Heinrich Schuchardt
• [PATCH v2] efi_loader: Use sysreset instead of reset command   Heinrich Schuchardt
• [PATCH] efi_loader: Set variable attributes when EFI_BUFFER_TOO_SMALL is returned   Heinrich Schuchardt
• [PATCH v2] efi_loader: Set variable attributes when EFI_BUFFER_TOO_SMALL is returned   Heinrich Schuchardt
• [PATCH 1/1] cmd: sbi: add Performance Monitoring Unit Extension   Heinrich Schuchardt
• Re: [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   Heinrich Schuchardt
• [PATCH v3 0/2] cmd/sbi: add missing SBI information   Heinrich Schuchardt
• [PATCH v3 1/2] riscv: provide missing base extension functions   Heinrich Schuchardt
• [PATCH v3 2/2] cmd/sbi: add missing SBI information   Heinrich Schuchardt
• [PATCH v2] efi_loader: Use sysreset instead of reset command   Heinrich Schuchardt
• [PATCH v2 0/9] efi_loader: booting via short-form device-path   Heinrich Schuchardt
• [PATCH v2 1/9] efi_loader: export efi_dp_shorten()   Heinrich Schuchardt
• [PATCH v2 2/9] efi_loader: fix efi_dp_find_obj()   Heinrich Schuchardt
• [PATCH v2 3/9] efi_loader: efi_dp_find_obj() add protocol check   Heinrich Schuchardt
• [PATCH v2 4/9] efi_loader: support booting via short-form device-path   Heinrich Schuchardt
• [PATCH v2 5/9] efi_loader: use short-form DP for load options   Heinrich Schuchardt
• [PATCH v2 6/9] efi_loader: export efi_system_partition_guid   Heinrich Schuchardt
• [PATCH v2 7/9] efi_loader: remove efi_disk_is_system_part()   Heinrich Schuchardt
• [PATCH v2 8/9] efi_loader: move dtbdump.c, initrddump.c to lib/efi_loader   Heinrich Schuchardt
• [PATCH v2 9/9] test: test UEFI boot manager   Heinrich Schuchardt
• [PATCH] Makefile: add drivers/video/u_boot_logo.S to clean   Heinrich Schuchardt
• [PATCH v2 17/23] i2c: sun8i_rsb: Only do non-DM pin setup for non-DM I2C   Heinrich Schuchardt
• [PATCH v2 17/23] i2c: sun8i_rsb: Only do non-DM pin setup for non-DM I2C   Heinrich Schuchardt
• [PATCH] image-fdt: save name of FIT configuration in '/chosen' node   Heinrich Schuchardt
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Heinrich Schuchardt
• [PATCH 1/3] rng: add OP-TEE based Random Number Generator   Heinrich Schuchardt
• [PATCH v3 0/3] test: test UEFI boot manager   Heinrich Schuchardt
• [PATCH v3 1/3] efi_loader: nocolor command line attr for initrddump.efi   Heinrich Schuchardt
• [PATCH v3 2/3] efi_loader: initrddump: drain input before prompt   Heinrich Schuchardt
• [PATCH v3 3/3] test: test UEFI boot manager   Heinrich Schuchardt
• [PATCH] image-fdt: save name of FIT configuration in '/chosen' node   Heinrich Schuchardt
• [PATCH v2] dm: Add docs to explain how to enable DM_SERIAL for a board   Heinrich Schuchardt
• [PATCH] efi_loader: optional persistence of variables   Heinrich Schuchardt
• [PATCH v3 01/29] doc: Convert semihosting readme to rST   Heinrich Schuchardt
• [PATCH v3 00/29] arm: semihosting: Cleanups and new features   Heinrich Schuchardt
• [PATCH] efi_loader: optional persistence of variables   Heinrich Schuchardt
• How to debug u-boot data abort   Heinrich Schuchardt
• data abort when run 'dhcp'   Heinrich Schuchardt
• data abort when run 'dhcp'   Heinrich Schuchardt
• [PATCH] imx8m: Use a sane SYS_MALLOC_F_LEN default   Heinrich Schuchardt
• [PATCH] efi_loader: optional persistence of variables   Heinrich Schuchardt
• [PATCH 1/1] cmd: efidebug: simplify do_efi_boot_add()   Heinrich Schuchardt
• [PATCH 1/1] riscv: enable CONFIG_CMD_SBI for QEMU boards   Heinrich Schuchardt
• [PATCH 1/3] rng: add OP-TEE based Random Number Generator   Heinrich Schuchardt
• [PATCH 1/1] dm: fix function documentation in include/dm/ofnode.h   Heinrich Schuchardt
• [PATCH] efi_loader: Expose relocated address for gdb debugging purposes   Heinrich Schuchardt
• [PATCH v5 5/9] qemu: arm: Remove platform specific function to get RNG device   Heinrich Schuchardt
• [PATCH 1/1] doc: update doc/sphinx/requirements.txt   Heinrich Schuchardt
• [PATCH] doc: man-page for the wdt command   Heinrich Schuchardt
• [PATCH v3 1/3] efi_loader: nocolor command line attr for initrddump.efi   Heinrich Schuchardt
• [PATCH v3 3/3] test: test UEFI boot manager   Heinrich Schuchardt
• [PATCH v3 3/3] test: test UEFI boot manager   Heinrich Schuchardt
• Pull request for efi-2022-04-rc5-2   Heinrich Schuchardt
• [PATCH 1/1] test: fix pylint warnings for test_efi_fit.py   Heinrich Schuchardt
• [PATCH 1/1] test: fix pylint warnings in test_efi_bootmgr   Heinrich Schuchardt
• [PATCH v2 1/3] rng: add OP-TEE based Random Number Generator   Heinrich Schuchardt
• [PATCH] doc: usage: Group all shell command docs into cmd/ sub-direcotry   Heinrich Schuchardt
• [PATCH 1/3] doc: usage: Convert README.vxworks to reST   Heinrich Schuchardt
• [PATCH 2/3] doc: usage: Update vxworks doc to mention RISC-V support   Heinrich Schuchardt
• [PATCH 3/3] doc: usage: Convert README.plan9 to reST   Heinrich Schuchardt
• [PATCH 1/1] Makefile: make clean should delete include/generated/env.in   Heinrich Schuchardt
• [PATCH v1 1/2] hexdump: Introduce debug APIs   Heinrich Schuchardt
• [PATCH v1 1/1] efi_loader: initrddump: Actually use the custom CFLAGS   Heinrich Schuchardt
• [PATCH 3/3] doc: usage: Convert README.plan9 to reST   Heinrich Schuchardt
• [PATCH] efi_loader (v2): Expose relocated address for gdb debugging purposes   Heinrich Schuchardt
• Issue with CI/CD   Quentin Schulz
• [RFC PATCH] mips: dts: add initial support for ls1c300 SoC   Daniel Schwierzeck
• [PATCH 00/52] mips: octeon: Add ethernet support   Daniel Schwierzeck
• [PATCH 00/11] virtio: pci: Add and fix consistency checks   Andrew Scull
• [PATCH 01/11] virtio: pci: Fix discovery of device config length   Andrew Scull
• [PATCH 02/11] virtio: pci: Bounds check device config access   Andrew Scull
• [PATCH 03/11] virtio: pci: Bounds check notification writes   Andrew Scull
• [PATCH 04/11] virtio: pci: Check virtio common config size   Andrew Scull
• [PATCH 05/11] virtio: pci: Check virtio capability is in bounds   Andrew Scull
• [PATCH 06/11] virtio: pci: Read entire capability into memory   Andrew Scull
• [PATCH 07/11] virtio: pci: Check virtio configs are mapped   Andrew Scull
• [PATCH 08/11] pci: Check region ranges are addressable   Andrew Scull
• [PATCH 09/11] pci: Add function to validate PCI address range   Andrew Scull
• [PATCH 10/11] virtio: pci: Check mapped range is in a PCI region   Andrew Scull
• [PATCH 11/11] virtio: pci: Allow exclusion of legacy driver   Andrew Scull
• [PATCH] sandbox: sdl: Add stub sandbox_sdl_remove_display()   Andrew Scull
• [PATCH] sandbox: sdl: Add stub sandbox_sdl_remove_display()   Andrew Scull
• [PATCH v2] sandbox: sdl: Add stub sandbox_sdl_remove_display()   Andrew Scull
• [PATCH 03/11] virtio: pci: Bounds check notification writes   Andrew Scull
• [PATCH 05/11] virtio: pci: Check virtio capability is in bounds   Andrew Scull
• [PATCH 06/11] virtio: pci: Read entire capability into memory   Andrew Scull
• [PATCH 07/11] virtio: pci: Check virtio configs are mapped   Andrew Scull
• [PATCH 06/11] virtio: pci: Read entire capability into memory   Andrew Scull
• [PATCH 09/11] pci: Add function to validate PCI address range   Andrew Scull
• [PATCH 06/11] virtio: pci: Read entire capability into memory   Andrew Scull
• [PATCH v2 00/18] virtio: pci: Add and fix consistency checks   Andrew Scull
• [PATCH v2 01/18] virtio: pci: Allow exclusion of legacy driver   Andrew Scull
• [PATCH v2 02/18] virtio: pci: Fix discovery of device config length   Andrew Scull
• [PATCH v2 03/18] virtio: pci: Bounds check device config access   Andrew Scull
• [PATCH v2 04/18] virtio: pci: Bounds check notification writes   Andrew Scull
• [PATCH v2 05/18] virtio: pci: Check virtio common config size   Andrew Scull
• [PATCH v2 06/18] virtio: pci: Check virtio capability is in bounds   Andrew Scull
• [PATCH v2 07/18] virtio: pci: Read entire capability into memory   Andrew Scull
• [PATCH v2 08/18] pci: Fix use of flags in dm_pci_map_bar()   Andrew Scull
• [PATCH v2 09/18] pci: Add config for Enhanced Allocation   Andrew Scull
• [PATCH v2 10/18] pci: Check region ranges are addressable   Andrew Scull
• [PATCH v2 11/18] pci: Range check address conversions   Andrew Scull
• [PATCH v2 12/18] test: pci: Test PCI address conversion functions   Andrew Scull
• [PATCH v2 13/18] pci: Map bars with offset and length   Andrew Scull
• [PATCH v2 14/18] pci: Match region flags using a mask   Andrew Scull
• [PATCH v2 15/18] pci: Update dm_pci_bus_to_virt() parameters   Andrew Scull
• [PATCH v2 16/18] pci: Add mask parameter to dm_pci_map_bar()   Andrew Scull
• [PATCH v2 17/18] virtio: pci: Check virtio configs are mapped   Andrew Scull
• [PATCH v2 18/18] virtio: pci: Make use of dm_pci_map_bar()   Andrew Scull
• [PATCH 00/11] virtio: Harden and test vring   Andrew Scull
• [PATCH 01/11] virtio_ring: Merge identical variables   Andrew Scull
• [PATCH 02/11] virtio_ring: Add helper to attach vring descriptor   Andrew Scull
• [PATCH 03/11] virtio_ring: Maintain a shadow copy of descriptors   Andrew Scull
• [PATCH 04/11] virtio_ring: Check used descriptors are chain heads   Andrew Scull
• [PATCH 05/11] dm: test: virtio: Test the virtio ring   Andrew Scull
• [PATCH 06/11] virtio: sandbox: Fix device features bitfield   Andrew Scull
• [PATCH 07/11] test: dm: virtio: Test notify before del_vqs   Andrew Scull
• [PATCH 08/11] virtio: sandbox: Bind RNG rather than block device   Andrew Scull
• [PATCH 09/11] test: dm: virtio: Test virtio device driver probing   Andrew Scull
• [PATCH 10/11] virtio: rng: Check length before copying   Andrew Scull
• [PATCH 11/11] RFC: test: dm: virtio: Test virtio-rng with faked device   Andrew Scull
• [PATCH 01/10] Makefile: v2 Allow LTO to be disabled for a build   Andrew Scull
• [PATCH 2/5] imx8mm-cl-iot-gate: Retrieve the DDR type from EEPROM   Harald Seiler
• [PATCH v1 1/1] efi_loader: initrddump: Actually use the custom CFLAGS   Andy Shevchenko
• [ANN] U-Boot v2022.04-rc1 released   Andy Shevchenko
• [PATCH v1 1/1] Makefile.lib: Always rebuild DSDT   Andy Shevchenko
• [ANN] U-Boot v2022.04-rc5 released   Andy Shevchenko
• [PATCH v1 1/1] Makefile.lib: Re-use $(UBOOTINCLUDE) in dtc_cpp_flags   Andy Shevchenko
• [PATCH v1 1/2] hexdump: Introduce debug APIs   Andy Shevchenko
• [ANN] U-Boot v2022.04-rc1 released   Andy Shevchenko
• [PATCH v1 1/1] Revert "x86: Move FACP table into separate functions"   Andy Shevchenko
• [PATCH] IOMUX: Fix access past end of console_devices   Andy Shevchenko
• [PATCH] IOMUX: Fix access past end of console_devices   Andy Shevchenko
• [PATCH] IOMUX: Fix access past end of console_devices   Andy Shevchenko
• [PATCH] IOMUX: Fix access past end of console_devices   Andy Shevchenko
• [PATCH] IOMUX: Fix access past end of console_devices   Andy Shevchenko
• [0/3] Add support for different mediatek pinctrl designs   Sam Shih
• [1/3] pinctrl: mediatek: rewrite mtk_pinconf_set and related functions   Sam Shih
• [2/3] pinctrl: mediatek: introduce multiple memory bases support   Sam Shih
• [3/3] pinctrl: mediatek: add support for different types of IO pins   Sam Shih
• I just want to make a simple change to the README   Clay Shoaf
• [PATCH] ARM: mvebu: x530: clearfog: Add ODT configuration   Baruch Siach
• [PATCH 0/2] board/armltd: add support for corstone1000   Rui Miguel Silva
• [PATCH 1/2] cmd: load: add load command for memory mapped   Rui Miguel Silva
• [PATCH 2/2] arm: add support to corstone1000 platform   Rui Miguel Silva
• [PATCH 2/2] arm: add support to corstone1000 platform   Rui Miguel Silva
• [PATCH] power: zynqmp: Use zynqmp_pmufw_node() from firmware   Michal Simek
• [PATCH] microblaze: Do not place u-boot to reserved memory location   Michal Simek
• [PATCH 0/3] i2c: i2c-cdns: Driver fixes   Michal Simek
• [PATCH 1/3] i2c: i2c-cdns: Start read transaction after write to transfer_size reg   Michal Simek
• [PATCH 2/3] i2c: i2c-cdns: Fix write transaction state   Michal Simek
• [PATCH 3/3] i2c: i2c-cdns: Prevent early termination of write   Michal Simek
• [PATCH] .mailmap: Record all address for main U-Boot contributor   Michal Simek
• [PATCH] gpio: slg7xl45106: Add support for slg7xl45106 i2c gpo expander   Michal Simek
• [PATCH] arm64: zynqmp: add support for zcu106 rev1.0   Michal Simek
• [PATCH v2] usb: dwc3: Add support to reset usb ULPI phy   Michal Simek
• [PATCH] usb: dwc3: Add support to reset usb ULPI phy   Michal Simek
• [PATCH] .mailmap: Fix Heinrich's xypron.glpk at gmx.de record   Michal Simek
• [PATCH] MAINTAINERS: Remove duplicated entry for ehci-zynq.c   Michal Simek
• [PATCH] dm: pinctrl: Use explicit values for enums   Michal Simek
• [PATCH] Revert "board: zynqmp: Fix for wrong AMS setting by ROM"   Michal Simek
• [PATCH 0/4] xilinx: Fru tool update   Michal Simek
• [PATCH] arm64: zynqmp: Fix i2c addresses for zynqmp-p-a2197   Michal Simek
• [PATCH 0/3] mmc: zynqmp_sdhci: Driver fixes   Michal Simek
• [PATCH 1/2] pinctrl: Increase length of pinmux status buffer   Michal Simek
• [PATCH 2/2] pinctrl: zynqmp: Add pinctrl driver   Michal Simek
• [PATCH] gpio: slg7xl45106: Add support for slg7xl45106 i2c gpo expander   Michal Simek
• [PATCH] power: zynqmp: Use zynqmp_pmufw_node() from firmware   Michal Simek
• [PATCH] microblaze: Do not place u-boot to reserved memory location   Michal Simek
• [PATCH 0/6] arm64: zynqmp: Update SOM boards   Michal Simek
• [PATCH] cmd: test: pinmux: Do not check all empty spaces   Michal Simek
• [PATCH v2 1/2] generic-phy: s/CONFIG_PHY/CONFIG_IS_ENABLED(PHY)/   Michal Simek
• [PATCH v2 2/2] usb: dwc3: Add support for usb3-phy PHY configuration   Michal Simek
• [PATCH] usb: dwc3: Add support for usb3-phy PHY configuration   Michal Simek
• [PATCH] usb: dwc3: Add support for usb3-phy PHY configuration   Michal Simek
• [PATCH v2 2/2] usb: dwc3: Add support for usb3-phy PHY configuration   Michal Simek
• [PATCH] usb: dwc3: Add support for usb3-phy PHY configuration   Michal Simek
• [PATCH v3 0/2] usb: dwc3: Enable PHY support   Michal Simek
• [PATCH v3 1/2] generic-phy: s/CONFIG_PHY/CONFIG_IS_ENABLED(PHY)/   Michal Simek
• [PATCH v3 2/2] usb: dwc3: Add support for usb3-phy PHY configuration   Michal Simek
• [PATCH 0/4] mmc: zynq_sdhci: Add support for dynamic IP configuration   Michal Simek
• [PATCH 0/2] xilinx: video: add skeleton drivers for zynqmp DP   Michal Simek
• [PATCH 0/3] i2c: i2c-cdns: Driver fixes   Michal Simek
• [PATCH] tools: zynqmp: add support for PM_CONFIG_OBJECT_TYPE_BASE define   Michal Simek
• [PATCH] arm64: zynqmp: add support for zcu106 rev1.0   Michal Simek
• [PATCH] MAINTAINERS: Remove duplicated entry for ehci-zynq.c   Michal Simek
• [PATCH 0/3] net: phy: Add support for ethernet-phy-id   Michal Simek
• [PATCH V3] dt-bindings: nvmem: add U-Boot environment variables binding   Michal Simek
• [PATCH 03/15] Convert CONFIG_ARMV8_SWITCH_TO_EL1 to Kconfig   Michal Simek
• [PATCH V3] dt-bindings: nvmem: add U-Boot environment variables binding   Michal Simek
• [v2 03/15] Convert CONFIG_ARMV8_SWITCH_TO_EL1 to Kconfig   Michal Simek
• [PATCH] cmd: test: pinmux: Do not check all empty spaces   Michal Simek
• [PATCH] arm64: zynqmp: Fix i2c addresses for zynqmp-p-a2197   Michal Simek
• [PATCH] arm64: zynqmp: Add pinctrl emmc description to SM-K26   Michal Simek
• [PATCH] arm64: zynqmp: Add pinctrl emmc description to SM-K26   Michal Simek
• [GIT PULL] xilinx patches for v2022.07-rc1   Michal Simek
• [PATCH] arm64: versal: Do not place u-boot to reserved memory location   Michal Simek
• [PATCH] arm64: zynqmp: Add resets property to sdhci nodes   Michal Simek
• [PATCH] firmware: zynqmp: Do not bind PD driver in SPL if disabled   Michal Simek
• Fwd: [PATCH] spi: zynq_spi: add chip select decoder support   Michal Simek
• [PATCH] dt-bindings: phy: Sync phy.h with Linux kernel   Michal Simek
• [PATCH] arm64: zynqmp: enable the PMUFW watchdog   Michal Simek
• [PATCH] arm64: zynqmp: Remove low level UART setting cont   Michal Simek
• [RFC PATCH 6/6] mkeficapsule: Remove raw and FIT GUID types   Michal Simek
• [RFC PATCH 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Michal Simek
• [RFC PATCH 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Michal Simek
• [RFC PATCH 6/6] mkeficapsule: Remove raw and FIT GUID types   Michal Simek
• [PATCH] arm64: zynqmp: enable the PMUFW watchdog   Michal Simek
• [PATCH] serial: zynq: Change fifor behavior in debug mode   Michal Simek
• [PATCH] mmc: zynq_sdhci: Fix SDx_BASECLK configuration   Michal Simek
• [PATCH v2 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Michal Simek
• Promlem with booting on a cora-z7-10   Michal Simek
• [PATCH] arm64: versal: Do not place u-boot to reserved memory location   Michal Simek
• [PATCH] dt-bindings: phy: Sync phy.h with Linux kernel   Michal Simek
• [PATCH] arm64: zynqmp: Remove low level UART setting cont   Michal Simek
• [PATCH] serial: zynq: Change fifor behavior in debug mode   Michal Simek
• [PATCH] mmc: zynq_sdhci: Fix SDx_BASECLK configuration   Michal Simek
• [PATCH] xilinx: Increase max size of image from 60 to 100MB   Michal Simek
• [PATCH] clk: zynqmp: Add support for for DP audio/video clocks   Michal Simek
• [PATCH] net: phy: Fix rgmii-id phy reset timeout issue   Michal Simek
• [PATCH] arm64: zynqmp: Record ID code for XCZU1EG device   Michal Simek
• [PATCH] dt-bindings: xilinx: Add missing ids for PD   Michal Simek
• [PATCH 0/6] xilinx: Add support for DM_ETH_PHY   Michal Simek
• [PATCH 1/6] net: zynq_gem: Use shared MDIO bus support for zynqmp   Michal Simek
• [PATCH 2/6] net: phy: Avoid phy gpio reset sequence if DM_ETH_PHY is enabled   Michal Simek
• [PATCH 3/6] net: zynq_gem: Move ethernet info print statement   Michal Simek
• [PATCH 4/6] gpio: slg7xl45106: Update gpio desc flags from DT   Michal Simek
• [PATCH 5/6] firmware: firmware-zynqmp: Add zynqmp_pm_set_gem_config api   Michal Simek
• [PATCH 6/6] net: zynq_gem: Add SGMII dynamic config support   Michal Simek
• [PATCH v4 3/4] pwm: Add driver for cadence TTC   Michal Simek
• [PATCH v4 2/4] timer: cadence: Add bind function to driver   Michal Simek
• [PATCH v4 4/4] arm: zynqmp: Enable PWM command and cadence ttc pwm driver   Michal Simek
• [PATCH v4 1/4] dm: core: Bind another driver with the same compatible string   Michal Simek
• [PATCH 16/25] microblaze: Migrate DCACHE/ICACHE to Kconfig   Michal Simek
• [PATCH v3 1/9] capsule: Add Image GUIDs and image index for platforms using capsule updates   Michal Simek
• atsama5d27 SD card boot question   Andrew Steinert
• arm: stm32h7: Support for the STM32H747I-DISCO board   Alexandre TORGUE
• [PATCH 14/18] Make ASYMMETRIC_KEY_TYPE depend on FIT_SIGNATURE   AKASHI Takahiro
• [PATCH 2/2] efi_loader: use short-form DP for load options   AKASHI Takahiro
• [PATCH 1/1] efi_loader: remove efi_disk_is_system_part()   AKASHI Takahiro
• [PATCH v2 05/13] event: Add basic support for events   AKASHI Takahiro
• [PATCH 1/1] efi_loader: remove efi_disk_is_system_part()   AKASHI Takahiro
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH v3 01/19] scsi: call device_probe() after scanning   AKASHI Takahiro
• [PATCH v3 02/19] usb: storage: call device_probe() after scanning   AKASHI Takahiro
• [PATCH v3 03/19] mmc: call device_probe() after scanning   AKASHI Takahiro
• [PATCH v3 04/19] nvme: call device_probe() after scanning   AKASHI Takahiro
• [PATCH v3 05/19] sata: call device_probe() after scanning   AKASHI Takahiro
• [PATCH v3 06/19] block: ide: call device_probe() after scanning   AKASHI Takahiro
• [PATCH v3 07/19] virtio: call device_probe() in scanning   AKASHI Takahiro
• [PATCH v3 09/19] dm: tag: add some document   AKASHI Takahiro
• [PATCH v3 10/19] test: dm: add tests for tag support   AKASHI Takahiro
• [PATCH v3 11/19] dm: disk: add UCLASS_PARTITION   AKASHI Takahiro
• [PATCH v3 12/19] dm: blk: add a device-probe hook for scanning disk partitions   AKASHI Takahiro
• [PATCH v3 14/19] efi_loader: disk: a helper function to create efi_disk objects from udevice   AKASHI Takahiro
• [PATCH v3 15/19] efi_loader: disk: a helper function to delete efi_disk objects   AKASHI Takahiro
• [PATCH v3 16/19] dm: disk: add read/write interfaces with udevice   AKASHI Takahiro
• [PATCH v3 17/19] efi_loader: disk: use udevice instead of blk_desc   AKASHI Takahiro
• [PATCH v3 18/19] efi_loader: disk: not create BLK device for BLK(IF_TYPE_EFI_LOADER) devices   AKASHI Takahiro
• [PATCH v3 19/19] efi_driver: align with efi_disk-dm integration   AKASHI Takahiro
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH v4 05/11] EFI: FMP: Add provision to update image's ImageTypeId in image descriptor   AKASHI Takahiro
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH v3 08/19] dm: add tag support   AKASHI Takahiro
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   AKASHI Takahiro
• [PATCH 14/18] Make ASYMMETRIC_KEY_TYPE depend on FIT_SIGNATURE   AKASHI Takahiro
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   AKASHI Takahiro
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   AKASHI Takahiro
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   AKASHI Takahiro
• [PATCH] test/py: efi_capsule: Handle expected reset after capsule on disk   AKASHI Takahiro
• [PATCH v3 3/3] test: test UEFI boot manager   AKASHI Takahiro
• [PATCH v2 1/9] efi_loader: export efi_dp_shorten()   AKASHI Takahiro
• [PATCH v2 8/9] efi_loader: move dtbdump.c, initrddump.c to lib/efi_loader   AKASHI Takahiro
• [PATCH v2 2/9] efi_loader: fix efi_dp_find_obj()   AKASHI Takahiro
• [PATCH v2 3/9] efi_loader: efi_dp_find_obj() add protocol check   AKASHI Takahiro
• [PATCH v2 4/9] efi_loader: support booting via short-form device-path   AKASHI Takahiro
• [PATCH v2 5/9] efi_loader: use short-form DP for load options   AKASHI Takahiro
• How to debug u-boot data abort   AKASHI Takahiro
• [RFC PATCH 0/6] efi: capsule: Image GUID usage cleanup   AKASHI Takahiro
• [PATCH v2 0/9] efi_loader: booting via short-form device-path   AKASHI Takahiro
• [PATCH v2 0/9] efi_loader: booting via short-form device-path   AKASHI Takahiro
• [RFC PATCH 0/6] efi: capsule: Image GUID usage cleanup   AKASHI Takahiro
• [PATCH v2 0/3] Add SPI boot to SPL on SUNIV/F1C100s   Jesse Taube
• [PATCH v1] clk: imxrt: Use dts for anatop base address   Jesse Taube
• [PATCH v1 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Jesse Taube
• [PATCH v1 2/2] imx: imxrt1050-evk: Add documentation for SPI boot   Jesse Taube
• [PATCH v1 0/8] Add support for the i.MXRT1170   Jesse Taube
• [PATCH v1 1/8] imx: imxrt1170-evk: Add support for the NXP i.MXRT1170-EVK   Jesse Taube
• [PATCH v1 2/8] ARM: dts: imxrt11170-pinfunc: Add pinctrl binding header   Jesse Taube
• [PATCH v1 3/8] dt-bindings: imx: Add clock binding for i.MXRT1170   Jesse Taube
• [PATCH v1 4/8] clk: imx: Add i.MXRT11xx pllv3 variant   Jesse Taube
• [PATCH v1 5/8] clk: imx: Add initial support for i.MXRT1170 clock driver   Jesse Taube
• [PATCH v1 6/8] RAM: Add changes for i.MXRT11xx series   Jesse Taube
• [PATCH v1 7/8] ARM: dts: imx: add i.MXRT1170-EVK support   Jesse Taube
• [PATCH v1 8/8] ARM: imxrt1170_defconfig: Add i.MXRT1170 defconfig   Jesse Taube
• [PATCH v2 0/4] IMXRT: Maintnice updates   Jesse Taube
• [PATCH v2 1/4] clk: imxrt: Use dts for anatop base address   Jesse Taube
• [PATCH v2 2/4] configs/*imxrt10*: SYS_MALLOC_LEN is too large   Jesse Taube
• [PATCH v2 3/4] ARM: dts: imxrt10..-evk: Linux moved pins-imxrt1020 to dts   Jesse Taube
• [PATCH v2 4/4] board: freescale: imxrt10..-evk: Fix missing include of serial.h   Jesse Taube
• [PATCH v1 5/8] clk: imx: Add initial support for i.MXRT1170 clock driver   Jesse Taube
• [PATCH v4 0/3] mtd: Support slc-mode for NTC CHIP   Jagan Teki
• [PATCH 0/7] sunxi: Fix U-Boot proper SPI operation   Jagan Teki
• [PATCH 1/2] reset: introduce reset_get_bulk_optional()   Jagan Teki
• [PATCH v3 01/12] rockchip: rk3228-power: sync power domain dt-binding header from Linux   Jagan Teki
• [RFC PATCH v1 1/6] arm: dts: rockchip: update rk3328.dtsi   Jagan Teki
• [RFC PATCH v1 5/6] rockchip: rk3318: add a95x-z2-rk3318_defconfig file   Jagan Teki
• [PATCH v4 0/3] mtd: Support slc-mode for NTC CHIP   Jagan Teki
• [PATCH v3 1/3] rockchip: Kconfig: Enable SPL support for rk3568   Jagan Teki
• [PATCH v3] spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode   Jagan Teki
• [PATCH v3 1/4] rockchip: gru: Set up SoC IO domain registers   Jagan Teki
• [PATCH v3 3/4] rockchip: bob: Enable more configs   Jagan Teki
• [PATCH v3 4/4] rockchip: rk3399: Add support for chromebook_kevin   Jagan Teki
• [PATCH v1] MAINTAINERS: add rockchip regex for more files and directories   Jagan Teki
• Pull request: u-boot-spi/master   Jagan Teki
• [PATCH v3 1/6] rockchip: move ROCKCHIP_STIMER_BASE to Kconfig   Jagan Teki
• [PATCH v1 3/3] rockchip: serial: Kconfig: add select SYS_NS16550 to config ROCKCHIP_SERIAL   Jagan Teki
• [PATCH v1 2/2] rockchip: mmc: rockchip_dw_mmc: add rk3066/rk3188 support   Jagan Teki
• [PATCH] rockchip: ram: sdram_rk3x88: replace comma by semicolon   Jagan Teki
• [PATCH v2 2/2] mmc: dw_mmc: support transfer mode auto detection   Jagan Teki
• [PATCH v1 00/11] rockchip fixes and extend rk3568 support   Jagan Teki
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Heiko Thiery
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Heiko Thiery
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Heiko Thiery
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Heiko Thiery
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Heiko Thiery
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Heiko Thiery
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Heiko Thiery
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Heiko Thiery
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Heiko Thiery
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Heiko Thiery
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Heiko Thiery
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Heiko Thiery
• [PATCH 0/2] enable DM_SERIAL on imx8mn-evk and imx8mn-ddr4-evk   Heiko Thiery
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Heiko Thiery
• [PATCH] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Heiko Thiery
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Heiko Thiery
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Heiko Thiery
• [PATCH v2] board: kontron: increase the CONFIG_SYS_MALLOC_F_LEN   Heiko Thiery
• [PATCH v2] imx8m: Use a sane SYS_MALLOC_F_LEN default   Heiko Thiery
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Heiko Thiery
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Heiko Thiery
• [PATCH v2 1/6] capsule: Add Image GUIDs for platforms using capsule updates   Heiko Thiery
• booting of renesas rcar v3u   Tuschik Thilo
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Joakim Tjernlund
• ARM A53 and initial MMU mapping for EL0/1/2/3 ?   Joakim Tjernlund
• No u-boot-rockchip pull request sent or merged for v2022.04   Philipp Tomsich
• [PATCH v1 06/11] rockchip: handle bootrom recovery mode in spl   Philipp Tomsich
• [PATCH 1/9] net: gmac_rockchip: Fix misuse of GENMASK macro   Pierre-Clément Tosi
• [PATCH 2/9] lib: crypt: Avoid redefining static_assert   Pierre-Clément Tosi
• [PATCH 3/9] scripts: Makefile.lib: Pass __UBOOT__ to DTC's CPP   Pierre-Clément Tosi
• [PATCH 4/9] linux/const.h: Upgrade & Merge vDSO and uAPI   Pierre-Clément Tosi
• [PATCH 5/9] include: Import <linux/bits.h> & Update bitops.h   Pierre-Clément Tosi
• [PATCH 6/9] include: Carve <linux/export.h> out of compat.h   Pierre-Clément Tosi
• [PATCH 7/9] include: Upgrade <linux/typecheck.h>   Pierre-Clément Tosi
• [PATCH 8/9] arm64: Import <asm/sysreg.h> from Linux   Pierre-Clément Tosi
• [PATCH 9/9] arm64: Import <asm/esr.h> from Linux   Pierre-Clément Tosi
• [PATCH 3/9] scripts: Makefile.lib: Pass __UBOOT__ to DTC's CPP   Pierre-Clément Tosi
• [PATCH 4/9] linux/const.h: Upgrade & Merge vDSO and uAPI   Pierre-Clément Tosi
• [PATCH 7/9] include: Upgrade <linux/typecheck.h>   Pierre-Clément Tosi
• [PATCH 9/9] arm64: Import <asm/esr.h> from Linux   Pierre-Clément Tosi
• [PATCH 1/3] armv8: Include <linux/types.h> in mmu.h   Pierre-Clément Tosi
• [PATCH 2/3] armv8: Drop support for non-MEMORY_ATTRIBUTES MAIR   Pierre-Clément Tosi
• [PATCH 3/3] armv8: Initialize MAIR in early boot   Pierre-Clément Tosi
• [PATCH] configs: imx6dl_mamoj_defconfig: Enable LTO on imx6dl_mamoj board   Michael Trimarchi
• [PATCH] drivers: adc: fix return value if timeout occurs   Michael Nazzareno Trimarchi
• [PATCH v2] drivers: adc: fix return value if timeout occurs   Michael Nazzareno Trimarchi
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Michael Nazzareno Trimarchi
• iMX8MM USB support?   Michael Nazzareno Trimarchi
• [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Michael Nazzareno Trimarchi
• [PATCH 4/9] arm: imx: imx8mm: add enable_pwm_clk function   Michael Nazzareno Trimarchi
• [PATCH v2 4/9] arm: imx: imx8mm: add enable_pwm_clk function   Michael Nazzareno Trimarchi
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Michael Nazzareno Trimarchi
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Michael Nazzareno Trimarchi
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Michael Nazzareno Trimarchi
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Michael Nazzareno Trimarchi
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Michael Nazzareno Trimarchi
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Michael Nazzareno Trimarchi
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Michael Nazzareno Trimarchi
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Michael Nazzareno Trimarchi
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Michael Nazzareno Trimarchi
• [PATCH v3 0/6] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Michael Nazzareno Trimarchi
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Michael Nazzareno Trimarchi
• [PATCH v4 00/33] Initial implementation of standard boot   Michael Nazzareno Trimarchi
• [PATCH v4 00/33] Initial implementation of standard boot   Michael Nazzareno Trimarchi
• [PATCH v4 00/33] Initial implementation of standard boot   Michael Nazzareno Trimarchi
• [PATCH] Add ethernet0 alias in Nanopi NEO's device tree   Michael Nazzareno Trimarchi
• [PATCH v4 00/33] Initial implementation of standard boot   Michael Nazzareno Trimarchi
• [PATCH v11 01/14] crypto/fsl: Add support for CAAM Job ring driver model   Michael Nazzareno Trimarchi
• [ANN] U-Boot v2022.04-rc5 released   Michael Nazzareno Trimarchi
• [ANN] U-Boot v2022.04-rc5 released   Michael Nazzareno Trimarchi
• [ANN] U-Boot v2022.04-rc5 released   Michael Nazzareno Trimarchi
• [ANN] U-Boot v2022.04-rc5 released   Michael Nazzareno Trimarchi
• [PATCH 0/3] Support pwm driver for aspeed ast26xx   Billy Tsai
• [PATCH 1/3] pwm: Add Aspeed ast2600 PWM support   Billy Tsai
• [PATCH 2/3] pinctrl: Add the pinctrl setting for PWM.   Billy Tsai
• [PATCH 3/3] ARM: dts: ast2600: Add PWM to device tree   Billy Tsai
• [PATCH u-boot 0/3] renesas: Fix RPC-IF enablement   Geert Uytterhoeven
• [PATCH u-boot 1/3] ARM: dts: rmobile: Fix RPC-IF device node names   Geert Uytterhoeven
• [PATCH u-boot 2/3] ARM: renesas: Propagate RPC-IF enablement to subsequent software   Geert Uytterhoeven
• [PATCH/RFC u-boot 3/3] renesas: Fix RPC-IF compatible values   Geert Uytterhoeven
• Fwd: [PATCH] spi: zynq_spi: add chip select decoder support   Nikita Vasilev
• Fwd: [PATCH] spi: zynq_spi: add chip select decoder support   Nikita Vasilev
• [PATCH v2] spi: zynq_spi: add chip select decoder support   Nikita Vasilev
• [PATCH v3] spi: zynq_spi: add chip select decoder support   Nikita Vasilev
• [PATCH v3] spi: zynq_spi: add chip select decoder support   Nikita Vasilev
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH] usb: dwc3: Add support for usb3-phy PHY configuration   Marek Vasut
• [PATCH] usb: dwc3: Add support for usb3-phy PHY configuration   Marek Vasut
• [PATCH] usb: gadget: ci: Make various ops const   Marek Vasut
• [PATCH] usb: dwc3: Add support for usb3-phy PHY configuration   Marek Vasut
• [PATCH v2 2/2] usb: dwc3: Add support for usb3-phy PHY configuration   Marek Vasut
• [PATCH] usb: dwc3: Add support for usb3-phy PHY configuration   Marek Vasut
• [PATCH] usb: dwc3: Add support for usb3-phy PHY configuration   Marek Vasut
• [PATCH] mtd: spi-nor-ids: Add Winbond W25Q128JW ID   Marek Vasut
• [PATCH] spi: nxp_fspi: Add i.MX8MP compatible string   Marek Vasut
• [PATCH] ARM: dts: imx: Add flexspi node to i.MX8MP   Marek Vasut
• [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Marek Vasut
• [PATCH] mmc: fsl_esdhc_imx: Add i.MX8MP compatible string   Marek Vasut
• [PATCH 1/2] pmic: pca9450: Add upstream regulators subnode match   Marek Vasut
• [PATCH 2/2] pmic: pca9450: Add regulator driver   Marek Vasut
• [PATCH] ARM: dts: stm32: Add USB OTG pinctrl and regulator nodes into SPL DT on DHCOR   Marek Vasut
• [PATCH] ARM: dts: stm32: Move vdd_io extras into Avenger96 extras   Marek Vasut
• [PATCH] clk: imx8mq: Add a clock driver for the imx8mq   Marek Vasut
• [PATCH] ARM: dts: stm32: Move vdd_io extras into Avenger96 extras   Marek Vasut
• [PATCH] clk: imx8mq: Add a clock driver for the imx8mq   Marek Vasut
• [PATCH v2 1/2] dt-bindings: imx8mq-clock: add mainline definitions   Marek Vasut
• [PATCH v2 2/2] clk: imx8mq: Add a clock driver for the imx8mq   Marek Vasut
• [PATCH v2 2/2] clk: imx8mq: Add a clock driver for the imx8mq   Marek Vasut
• [PATCH v2 2/2] clk: imx8mq: Add a clock driver for the imx8mq   Marek Vasut
• [PATCH][RFC] image: fdt: Fix DT relocation handling with multiple DRAM banks with gap   Marek Vasut
• [PATCH][RFC] image: fdt: Fix DT relocation handling with multiple DRAM banks with gap   Marek Vasut
• [PATCH] usb: dwc2: handle return code of dev_read_size() in of to plat function   Marek Vasut
• [PATCH v2 2/2] clk: imx8mq: Add a clock driver for the imx8mq   Marek Vasut
• [PATCH v2] usb: dwc2: handle return code of dev_read_size() in of to, plat function   Marek Vasut
• [PATCH v2] usb: dwc2: handle return code of dev_read_size() in of to, plat function   Marek Vasut
• [PATCH v3] usb: dwc2: handle return code of dev_read_size() in of to, plat function   Marek Vasut
• ARM: socfpga: gen5: release reset before using USB as device with ums   Marek Vasut
• [PATCH] ARM: dts: stm32: Add DFU support for DHCOM recovery   Marek Vasut
• [PATCH v3 1/4] dt-bindings: imx8mq-clock: add mainline definitions   Marek Vasut
• [PATCH v3 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Marek Vasut
• [PATCH v3 3/4] clk: imx8m: reduce rate table duplication   Marek Vasut
• [PATCH v3 4/4] clk: imx8m: remove code duplication   Marek Vasut
• [PATCH v3 3/4] clk: imx8m: reduce rate table duplication   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [Uboot-stm32] [PATCH] arm: dts: stm32mp15: alignment with v5.17   Marek Vasut
• [PATCH] ARM: dts: stm32: Add USB OTG pinctrl and regulator nodes into SPL DT on DHCOR   Marek Vasut
• [PATCH] ARM: dts: stm32: Move vdd_io extras into Avenger96 extras   Marek Vasut
• [PATCH v3 1/2] ram: stm32mp1: Unconditionally enable ASR   Marek Vasut
• [PATCH] ARM: dts: stm32: Add DFU support for DHCOM recovery   Marek Vasut
• [Uboot-stm32] [PATCH] arm: dts: stm32mp15: alignment with v5.17   Marek Vasut
• [PATCH] ARM: dts: stm32: Add DFU support for DHCOM recovery   Marek Vasut
• [PATCH] ARM: dts: stm32: Add DFU support for DHCOM recovery   Marek Vasut
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH] mtd: spi-nor-ids: Add Winbond W25Q128JW ID   Marek Vasut
• [PATCH] mtd: spi-nor-ids: Add Winbond W25Q128JW ID   Marek Vasut
• [PATCH 2/2] pmic: pca9450: Add regulator driver   Marek Vasut
• [PATCH v2 4/9] arm: imx: imx8mm: add enable_pwm_clk function   Marek Vasut
• [PATCH v2 4/9] arm: imx: imx8mm: add enable_pwm_clk function   Marek Vasut
• [PATCH v2 4/9] arm: imx: imx8mm: add enable_pwm_clk function   Marek Vasut
• [PATCH v2 4/9] arm: imx: imx8mm: add enable_pwm_clk function   Marek Vasut
• [PATCH 1/2] ARM: imx: imx8m: Add 933 MHz PLL settings   Marek Vasut
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Marek Vasut
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Marek Vasut
• [PATCH] ARM: imx: Decode ECSPI env location from i.MX8M ROMAPI tables   Marek Vasut
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Marek Vasut
• [PATCH] usb_hub: Set DM_FLAG_DEFAULT_PD_CTRL_OFF to usb_hub driver   Marek Vasut
• [PULL] u-boot-socfpga/master   Marek Vasut
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Marek Vasut
• [PATCH v2] ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBC   Marek Vasut
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Marek Vasut
• [PATCH] power-domain: Return 0 if ops unimplemented and remove empty functions   Marek Vasut
• [PATCH] ARM: imx: Get rid of only i.MX8M SMCCC arch call   Marek Vasut
• [PATCH 1/3] imx: power-domain: Descend into pgc subnode if present   Marek Vasut
• [PATCH 2/3] imx: power-domain: Inline arch-imx8m/power-domain.h   Marek Vasut
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Marek Vasut
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Marek Vasut
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Marek Vasut
• [EXT] [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   Marek Vasut
• [PATCH] led: led_pwm: Add a driver for LEDs connected to PWM   Ivan Vozvakhov
• [PATCH v3 00/31] Initial implementation of standard boot   Michael Walle
• phy_connect_dev calling phy_reset???   Michael Walle
• [PATCH v3 22/31] bootstd: Add an implementation of EFI boot   Michael Walle
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Michael Walle
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Michael Walle
• [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Michael Walle
• [PATCH 8/9] arm: dts: imx8mm_evk: add pwm1/backlight support   Michael Walle
• [PATCH 8/9] arm: dts: imx8mm_evk: add pwm1/backlight support   Michael Walle
• [PATCH 8/9] arm: dts: imx8mm_evk: add pwm1/backlight support   Michael Walle
• [PATCH v4 2/4] clk: imx8mq: Add a clock driver for the imx8mq   Michael Walle
• [RFC] serial: mxc: get the clock frequency from the used clock for the device   Michael Walle
• [PATCH v4] wdt: nuvoton: Add support for Nuvoton   Michael Walle
• [PATCH v6] wdt: nuvoton: Add support for Nuvoton   Michael Walle
• [PATCH v7] wdt: nuvoton: Add support for Nuvoton   Michael Walle
• [PATCH 12/22] Convert CONFIG_LSCHLV2 to Kconfig et al   Michael Walle
• [PATCH 00/17] arm: semihosting: Cleanups and new features   Linus Walleij
• [PATCH 00/11] vexpress64: OF_CONTROL and ARMv8-R64 support   Linus Walleij
• [PATCH 1/3] pwm: Add Aspeed ast2600 PWM support   ChiaWei Wang
• [PATCH 2/3] pinctrl: Add the pinctrl setting for PWM.   ChiaWei Wang
• [PATCH 3/3] ARM: dts: ast2600: Add PWM to device tree   ChiaWei Wang
• [EXT] [PATCH] mtd: mxs_nand: default to legacy bch and rename to modern bch option   Han Xu
• [PATCH] mtd: gpmi: fix the gpmi bch setting unalignment issue   Han Xu
• [PATCH] mtd: gpmi: fix the gpmi bch setting unalignment issue   Han Xu
• [PATCH v2] mtd: gpmi: fix the bch setting backward compatible issue   Han Xu
• [PATCH v3] mtd: gpmi: fix the bch setting backward compatible issue   Han Xu
• [PATCH v4] mtd: gpmi: fix the bch setting backward compatible issue   Han Xu
• [PATCH 13/25] spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to Kconfig   Pratyush Yadav
• [PATCH 13/25] spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to Kconfig   Pratyush Yadav
• [v2 13/25] spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to Kconfig   Pratyush Yadav
• No u-boot-rockchip pull request sent or merged for v2022.04   Kever Yang
• [PATCH v1] MAINTAINERS: add rockchip regex for more files and directories   Kever Yang
• No u-boot-rockchip pull request sent or merged for v2022.04   Kever Yang
• [PATCH v3 1/6] rockchip: move ROCKCHIP_STIMER_BASE to Kconfig   Kever Yang
• [PATCH v1 00/11] rockchip fixes and extend rk3568 support   Kever Yang
• No u-boot-rockchip pull request sent or merged for v2022.04   Kever Yang
• [PATCH] Enable USB mass storage on Renegade   Kever Yang
• [PATCH] arm: dts: rk3399-puma: re-add vdd_log for uboot   Kever Yang
• [PATCH] rockchip: ram: sdram_rk3x88: replace comma by semicolon   Kever Yang
• [PATCH] include: configs: move USB first in the boot order for rk3399   Kever Yang
• [PATCH] rockchip: Set default LNX_KRNL_IMG_TEXT_OFFSET_BASE to SYS_TEXT_BASE   Kever Yang
• [PATCH] drivers/adc/rockchip-saradc: remove double semi-colon   Kever Yang
• [PATCH v2] adc: rockchip-saradc: add support for getting reference voltage value   Kever Yang
• [PATCH 1/2] arm64: dts: rk3399-rock-pi-4b-u-boot: add optee node   Kever Yang
• [PATCH 2/2] configs: rock-pi-4: Enable OP-TEE secure os support   Kever Yang
• [PATCH v1 02/11] mmc: sdhci: allow disabling sdma in spl   Kever Yang
• [PATCH v1 03/11] spi: rockchip-sfc: fix building rockchip-sfc   Kever Yang
• [PATCH v1 01/11] clk: rockchip: rk3568: fix reset handler   Kever Yang
• [PATCH v1 08/11] rockchip: rk3568: enable automatic clock gating   Kever Yang
• [PATCH v1 04/11] spi: rockchip-sfc: sanity check minimum freq   Kever Yang
• [PATCH v1 00/11] rockchip fixes and extend rk3568 support   Kever Yang
• [PATCH v1 06/11] rockchip: handle bootrom recovery mode in spl   Kever Yang
• [PATCH v2] rockchip: saradc: remove double semi-colon   Kever Yang
• No u-boot-rockchip pull request sent or merged for v2022.04   Kever Yang
• [PATCH v5 1/3] mmc: sdhci: Add HS400 Enhanced Strobe support   Kever Yang
• [PATCH v5 2/3] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3399   Kever Yang
• [PATCH v5 3/3] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3568   Kever Yang
• [PATCH] rockchip: rk3328: enable USB mass storage on Renegade   Kever Yang
• [PATCH v3 1/6] rockchip: move ROCKCHIP_STIMER_BASE to Kconfig   Kever Yang
• Pull request: u-boot-rockchip-20220318   Kever Yang
• [PATCH] rockchip: clk: add clocks to px30_clk_enable   Kever Yang
• [PATCH] spi: rockchip_sfc: Add missing include for dm/device_compat.h   Kever Yang
• [PATCH v3 02/12] rockchip: rk3228-cru: sync the clock dt-binding header from Linux   Kever Yang
• [PATCH v3 01/12] rockchip: rk3228-power: sync power domain dt-binding header from Linux   Kever Yang
• [PATCH v3 03/12] arm: dts: rockchip: move all rk322x u-boot specific properties in separate dtsi files   Kever Yang
• [PATCH v3 04/12] arm: dts: rockchip: sync rk322x.dtsi from Linux   Kever Yang
• [PATCH v3 05/12] arm: dts: rockchip: sync rk3229-evb.dts from Linux   Kever Yang
• [PATCH v3 06/12] rockchip: rk3288-power: sync power domain dt-binding header from Linux   Kever Yang
• [PATCH v3 07/12] rockchip: rk3288-cru: sync the clock dt-binding header from Linux   Kever Yang
• [PATCH v3 08/12] arm: dts: rockchip: move all rk3288 u-boot specific properties in separate dtsi files   Kever Yang
• [PATCH v3 09/12] arm: dts: rockchip: sync rk3288.dtsi from Linux   Kever Yang
• [PATCH v3 10/12] arm: dts: rockchip: sync rk3288 DT boards from Linux   Kever Yang
• [PATCH v3 11/12] arm: dts: rockchip: sync rk3288-veyron DT from Linux   Kever Yang
• [PATCH v3 12/12] rockchip: fix boot_devices constants   Kever Yang
• [PATCH] mmc: rockchip_sdhci: Correct error checking   Kever Yang
• [PATCH] tools: mkimage: No need to verify_header for header_v2   Kever Yang
• [PATCH 03/24] spl: x86: Correct the binman symbols for SPL   Alper Nebi Yasak
• [PATCH 06/24] dtoc: Support adding a string list to a device tree   Alper Nebi Yasak
• [PATCH 09/24] dtoc: Support reading a list of arguments   Alper Nebi Yasak
• [PATCH 20/24] binman: Support splitting an ELF file into multiple nodes   Alper Nebi Yasak
• [PATCH v2 01/25] dtoc: Make GetArgs() more flexible   Alper Nebi Yasak
• [PATCH v2 02/25] moveconfig: Remove remove_defconfig()   Alper Nebi Yasak
• [PATCH v2 03/25] moveconfig: Use re.fullmatch() to avoid extra check   Alper Nebi Yasak
• [PATCH v2 04/25] spl: Correct Kconfig help for TPL_BINMAN_SYMBOLS   Alper Nebi Yasak
• [PATCH v2 05/25] dtoc: Tidy up implementation of AddStringList()   Alper Nebi Yasak
• [PATCH v2 06/25] elf: Rename load_segments() and module failure   Alper Nebi Yasak
• [PATCH v2 07/25] binman: Tweak collect_contents_to_file() and docs   Alper Nebi Yasak
• [PATCH v2 08/25] binman: Rename ExpandToLimit to extend_to_limit   Alper Nebi Yasak
• [PATCH v2 09/25] binman: Rename ExpandEntries to gen_entries   Alper Nebi Yasak
• [PATCH v2 10/25] binman: Refactor fit to generate output at the end   Alper Nebi Yasak
• [PATCH v2 11/25] binman: Rename tools parameter to btools   Alper Nebi Yasak
• [PATCH v2 12/25] binman: Change how faked blobs are created   Alper Nebi Yasak
• [PATCH v2 13/25] binman: Make fake blobs zero-sized by default   Alper Nebi Yasak
• [PATCH v2 14/25] binman: Allow mkimage to use a non-zero fake-blob size   Alper Nebi Yasak
• [PATCH v2 15/25] binman: Read the fit entries only once   Alper Nebi Yasak
• [PATCH v2 16/25] binman: Fix some pylint warnings in fit   Alper Nebi Yasak
• [PATCH v2 17/25] binman: Add a consistent way to report errors with fit   Alper Nebi Yasak
• [PATCH v2 18/25] binman: Update fit to use node instead of subnode   Alper Nebi Yasak
• [PATCH v2 19/25] binman: Keep a separate list of entries for fit   Alper Nebi Yasak
• [PATCH v2 20/25] binman: Support splitting an ELF file into multiple nodes   Alper Nebi Yasak
• [PATCH v2 22/25] rockchip: Include binman script in 64-bit boards   Alper Nebi Yasak
• [PATCH v2 23/25] rockchip: Support building the all output files in binman   Alper Nebi Yasak
• [RFC] [PATCH] binman: support mkimage split files   Alper Nebi Yasak
• [PATCH v2] binman: support mkimage separate files   Alper Nebi Yasak
• [PATCH v2 12/25] binman: Change how faked blobs are created   Alper Nebi Yasak
• [PATCH v2 14/25] binman: Allow mkimage to use a non-zero fake-blob size   Alper Nebi Yasak
• [PATCH v2 19/25] binman: Keep a separate list of entries for fit   Alper Nebi Yasak
• [PATCH v3 16/26] binman: Update fit to move node reading into the ReadNode() method   Alper Nebi Yasak
• [PATCH v3 21/26] binman: Support splitting an ELF file into multiple nodes   Alper Nebi Yasak
• [PATCH v3 22/26] rockchip: evb-rk3288: Drop raw-image support   Alper Nebi Yasak
• No u-boot-rockchip pull request sent or merged for v2022.04   Alper Nebi Yasak
• No u-boot-rockchip pull request sent or merged for v2022.04   Alper Nebi Yasak
• No u-boot-rockchip pull request sent or merged for v2022.04   Alper Nebi Yasak
• No u-boot-rockchip pull request sent or merged for v2022.04   Alper Nebi Yasak
• No u-boot-rockchip pull request sent or merged for v2022.04   Alper Nebi Yasak
• [PATCH v2 12/25] binman: Change how faked blobs are created   Alper Nebi Yasak
• [PATCH v3 22/26] rockchip: evb-rk3288: Drop raw-image support   Alper Nebi Yasak
• [PATCH v3 1/4] rockchip: gru: Set up SoC IO domain registers   Alper Nebi Yasak
• [PATCH v3 3/4] rockchip: bob: Enable more configs   Alper Nebi Yasak
• [PATCH v3 4/4] rockchip: rk3399: Add support for chromebook_kevin   Alper Nebi Yasak
• No u-boot-rockchip pull request sent or merged for v2022.04   Alper Nebi Yasak
• [PATCH v5 0/3] rockchip: sdhci: Add HS400 Enhanced Strobe support   Alper Nebi Yasak
• [PATCH v5 1/3] mmc: sdhci: Add HS400 Enhanced Strobe support   Alper Nebi Yasak
• [PATCH v5 2/3] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3399   Alper Nebi Yasak
• [PATCH v5 3/3] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3568   Alper Nebi Yasak
• [PATCH 0/7] binman: Fix replacing FIT subentries   Alper Nebi Yasak
• [PATCH 1/7] binman: Fix unique names having '/.' for images read from files   Alper Nebi Yasak
• [PATCH 2/7] binman: Collect bintools for images when replacing entries   Alper Nebi Yasak
• [PATCH 3/7] binman: Don't reset offset/size if image doesn't allow repacking   Alper Nebi Yasak
• [PATCH 4/7] binman: Remove '/images/' fragment from FIT subentry paths   Alper Nebi Yasak
• [PATCH 5/7] binman: Create FIT subentries in the FIT section, not its parent   Alper Nebi Yasak
• [PATCH 6/7] binman: Test replacing non-section entries in FIT subsections   Alper Nebi Yasak
• [PATCH 7/7] binman: Refuse to replace sections for now   Alper Nebi Yasak
• [PATCH 1/2] reset: introduce reset_get_bulk_optional()   Nikita Yushchenko
• Odroid C2 - No autoboot without serial   ? Yuu?
• [PATCH 0/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   William Zhang
• [PATCH 1/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   William Zhang
• [PATCH 1/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   William Zhang
• [PATCH 1/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   William Zhang
• [PATCH 1/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   William Zhang
• [PATCH 1/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   William Zhang
• [PATCH] sunxi: fix build when CONFIG_UART0_PORT_F is selected   Icenowy Zheng
• [PATCH] sunxi: fix build when CONFIG_UART0_PORT_F is selected   Icenowy Zheng
• [RFC 0/4] mtd: spinand: Add continuous read mode support   Zhengxun
• [RFC 1/4] mtd: spinand: Add support continuous read mode   Zhengxun
• [RFC 2/4] mtd: spinand: Add continuous read state   Zhengxun
• [RFC 3/4] mtd: spinand: Add support continuous read operation   Zhengxun
• [RFC 4/4] mtd: spinand: macronix: Add support for MX35LF2GE4AD   Zhengxun
• [PATCH] net: tftp: fix tftp server initialization   Arjan Minzinga Zijlstra
• imx8mp EQoS "EQOS_DMA_MODE_SWR stuck"   Marcel Ziswiler
• Status of Intel (Altera) Arria-10 support   Marcel Gielen [Celestia-STS]
• u-boot v2022.01 and Arria-10 socdk not booting   Marcel Gielen [Celestia-STS]
• [PATCH 0/6] introduce Arm FF-A support   abdellatif.elkhlifi at arm.com
• [PATCH 1/6] arm_ffa: introduce Arm FF-A low-level driver   abdellatif.elkhlifi at arm.com
• [PATCH 2/6] arm_ffa: introduce armffa command   abdellatif.elkhlifi at arm.com
• [PATCH 3/6] arm_ffa: introduce the FF-A Sandbox driver   abdellatif.elkhlifi at arm.com
• [PATCH 4/6] arm_ffa: introduce Sandbox test cases for UCLASS_FFA   abdellatif.elkhlifi at arm.com
• [PATCH 5/6] arm_ffa: introduce armffa command Sandbox test   abdellatif.elkhlifi at arm.com
• [PATCH 6/6] arm_ffa: introduce FF-A MM communication   abdellatif.elkhlifi at arm.com
• [PATCH] drivers: led: bcm6858: Set default brightness when setting LED state   Paul HENRYS d'AUBIGNY
• [PATCH 1/3] configs: falcon: Enabled I2C support for R-Car V3U   marek.vasut at gmail.com
• [PATCH 2/3] configs: eagle: Enabled I2C support for R-Car V3M   marek.vasut at gmail.com
• [PATCH 3/3] configs: condor: Enabled I2C support for R-Car V3H   marek.vasut at gmail.com
• [PATCH] mtd: rawnand: mxs_nand: Fix use_minimum_ecc for spl driver   han.xu
• How to register a "clk-divider" with a "clk_div_table"   dhu at hodcarrier.org
• [PATCH] mtd: spi: Add ISSI QSPI to lightweight SPI flash stack for spl   raaj.lokanathan at intel.com
• [PATCH] mtd: spi-nor: Parse SFDP Command Sequence to change to Octal DDR(8D-8D-8D) mode   liao jaime
• [PATCH] mtd: spi-nor: Parse SFDP Command Sequence to change to Octal DDR(8D-8D-8D) mode   liao jaime
• [PATCH v1 0/1]wdt: nuvoton: Add support for Nuvoton   jimliu2
• [PATCH v1 1/1] wdt: nuvoton: Add support for Nuvoton   jimliu2
• [PATCH v2 0/1]wdt: nuvoton: Add support for Nuvoton   jimliu2
• [PATCH v2 1/1] wdt: nuvoton: Add support for Nuvoton   jimliu2
• [PATCH v3] wdt: nuvoton: Add support for Nuvoton   jimliu2
• [PATCH] doc: board: raspberrypi: Add documentation   matthias.bgg at kernel.org
• [PATCH] armv8/fsl-lsch3: Suppress spurious warning on Layerscape CPUs   stcarlso at linux.microsoft.com
• [PATCH v5 1/4] timer: atmel_tcb_timer: add atmel_tcb driver   Claudiu.Beznea at microchip.com
• [PATCH v5 2/4] ARM: dts: at91: sama5d2: add AIC node   Claudiu.Beznea at microchip.com
• [PATCH v5 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Claudiu.Beznea at microchip.com
• [PATCH v5 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Claudiu.Beznea at microchip.com
• [PATCH v6 1/4] timer: atmel_tcb_timer: add atmel_tcb driver   Claudiu.Beznea at microchip.com
• [PATCH v6 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Claudiu.Beznea at microchip.com
• [PATCH 2/2] clk: Use generic CCF ops where possible   Claudiu.Beznea at microchip.com
• [PATCH 1/4] board: Add sam9x60_curiosity support   Durai.ManickamKR at microchip.com
• [PATCH v2 1/3] timer: atmel_tcb_timer: add atmel_tcb driver   Eugen.Hristev at microchip.com
• [PULL] u-boot-at91-fixes-2022.04-a   Eugen.Hristev at microchip.com
• [PATCH v2 1/3] timer: atmel_tcb_timer: add atmel_tcb driver   Eugen.Hristev at microchip.com
• [PATCH v3 2/3] ARM: dts: at91: sama5d2: add TCB node   Eugen.Hristev at microchip.com
• [PATCH v4 2/3] ARM: dts: at91: sama5d2: add TCB node   Eugen.Hristev at microchip.com
• [PATCH v5 3/4] ARM: dts: at91: sama5d2: add TCB node   Eugen.Hristev at microchip.com
• [PATCH v5 2/4] ARM: dts: at91: sama5d2: add AIC node   Eugen.Hristev at microchip.com
• [PATCH 2/2] ARM: dts: at91: sama7g5/sama7g5ek: align with Linux DT   Eugen.Hristev at microchip.com
• [PATCH v5 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Eugen.Hristev at microchip.com
• [PATCH v2 1/2] ARM: dts: at91: rename sama7g5ek.dts to at91-sama7g5ek.dts   Eugen.Hristev at microchip.com
• [PATCH v6 2/4] ARM: dts: at91: sama5d2: add AIC node   Eugen.Hristev at microchip.com
• [PATCH 0/2] ARM: at91: sama7g5: Reset external devices at software reset   Eugen.Hristev at microchip.com
• [PATCH 1/4] board: Add sam9x60_curiosity support   Eugen.Hristev at microchip.com
• [PATCH v7 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Eugen.Hristev at microchip.com
• [PATCH] board: at91: sama5d2: set blue led on at boot time   Eugen.Hristev at microchip.com
• [PATCH v3 1/2] ARM: dts: at91: rename sama7g5ek.dts to at91-sama7g5ek.dts   Eugen.Hristev at microchip.com
• [PATCH 0/4] Add support for sam9x60_curiosity   Eugen.Hristev at microchip.com
• [PATCH-next] include: configs: at91/sam: remove stray #ifdef/#else   Eugen.Hristev at microchip.com
• [PATCH v7 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Eugen.Hristev at microchip.com
• [PATCH v7 4/4] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER   Eugen.Hristev at microchip.com
• [PATCH 1/2] ARM: dts: at91: rename sama7g5ek.dts to at91-sama7g5ek.dts   Tudor.Ambarus at microchip.com
• [PATCH 2/2] ARM: dts: at91: sama7g5/sama7g5ek: align with Linux DT   Tudor.Ambarus at microchip.com
• [PATCH v2 1/2] ARM: dts: at91: rename sama7g5ek.dts to at91-sama7g5ek.dts   Tudor.Ambarus at microchip.com
• [PATCH v3 1/2] ARM: dts: at91: rename sama7g5ek.dts to at91-sama7g5ek.dts   Tudor.Ambarus at microchip.com
• [PATCH v3 2/2] ARM: dts: at91: sama7g5/sama7g5ek: align with Linux DT   Tudor.Ambarus at microchip.com
• [PATCH] mtd: spi-nor-ids: Add Winbond W25Q128JW ID   Tudor.Ambarus at microchip.com
• [PATCH] mtd: spi-nor: Parse SFDP Command Sequence to change to Octal DDR(8D-8D-8D) mode   Tudor.Ambarus at microchip.com
• [PATCH] mtd: spi-nor: Parse SFDP Command Sequence to change to Octal DDR(8D-8D-8D) mode   Tudor.Ambarus at microchip.com
• [PATCH] mtd: spi-nor: Parse SFDP Command Sequence to change to Octal DDR(8D-8D-8D) mode   Tudor.Ambarus at microchip.com
• [PATCH] mtd: spi-nor-ids: Add Winbond W25Q128JW ID   Tudor.Ambarus at microchip.com
• [PATCH] armv8: layerscape: fix the function mismatch issue   andy.tang at nxp.com
• [PATCH v2] armv8: layerscape: fix the function mismatch issue   andy.tang at nxp.com
• [PATCH v<9>] arm: add initial support for the Phytium Pomelo Board   nicholas_zheng at outlook.com
• How to debug u-boot data abort   qianfan
• How to debug u-boot data abort   qianfan
• How to debug u-boot data abort   qianfan
• data abort when run 'dhcp'   qianfan
• data abort when run 'dhcp'   qianfan
• data abort when run 'dhcp'   qianfan
• data abort when run 'dhcp'   qianfan
• How to debug u-boot data abort   qianfan
• data abort when run 'dhcp'   qianfan
• data abort when run 'dhcp'   qianfan
• [PATCH] net: phy: dp83867: Fix a never true comparison   li.haolin at qq.com
• [PATCH] mmc: rockchip_sdhci: Correct error checking   li.haolin at qq.com
• [PATCH v5 3/3] rockchip: sdhci: Add HS400 Enhanced Strobe support for RK3568   zyf at rock-chips.com
• [PATCH]armv7: cache: support L2 cache disable   haifeng.li at timesintelli.com
• cache: l2x0: Fix incorrect behavior if the latency is 1 cycle   haifeng.li at timesintelli.com
• 回复: [PATCH V8] arm: add initial support for the Phytium Pomelo Board   Nicholas zheng
• [PATCH 1/2] sunxi: Fix old GMAC pinmux setup   Jernej Škrabec
• A20-OLinuXino-LIME2 network regression [Was: [PATCH v2 1/5] sunxi: move non-essential code out of s_init()]   Petr Štetiar
• [PATCH 1/2] sunxi: Fix old GMAC pinmux setup   Petr Štetiar
• Poky defconfig error   مشاري
• [PATCH v7] wdt: nuvoton: Add support for Nuvoton   劉家君
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   陈健洪
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   陈健洪