[PATCH 5/8] usb: ehci-mx6: Allow building SDP for imx8mm

[Fabio Estevam]

Hi Jaap,

On Sun, Mar 27, 2022 at 6:19 PM Jaap Crezee <jaap at jcz.nl> wrote:

> But then SDP boot still fails with:
>
> ( make flash.bin && uuu ./flash.bin )
> U-Boot SPL 2022.04-rc4-00079-gcbc05bba8c (Mar 27 2022 - 22:52:29 +0200)
> PMIC:  PFUZE100 ID=0x10
> Normal Boot
> SPL: Unsupported Boot Device 9
> SPL: failed to boot from all boot devices (err=-6)
> ### ERROR ### Please RESET the board ###
>
> I have attached my complete .config is that helps anyone.

Have you tried applying this patch?
https://lists.denx.de/pipermail/u-boot/2021-July/453633.html

I need to resend the imx8mm_evk SDP support.