[PATCH 5/8] usb: ehci-mx6: Allow building SDP for imx8mm

[Jaap Crezee]

Hello Fabio,

On 3/27/22 23:43, Fabio Estevam wrote:
> Have you tried applying this patch?
> https://lists.denx.de/pipermail/u-boot/2021-July/453633.html

I have not tried this (yet) as there is no board/freescale/imx8mm_evk/spl.o so I guess this is not used in my tree.
The imx8mq_evk/spl.[co] is not present.

> I need to resend the imx8mm_evk SDP support.

Maybe this needs more attention? I have seen the u-boot-imx boot this way, so there migt be the missing link.
I can investigate further if my efforts could ultimately result into mainline support?

Jaap