[PATCH 3/4] configs: Add sam9x60_curiosity_mmc_defconfig
Durai Manickam KR
durai.manickamkr at microchip.com
Mon Mar 21 11:34:52 CET 2022
Add boot from SDMMC (sdcard) support for sam9x60_curiosity.
Signed-off-by: Durai Manickam KR <durai.manickamkr at microchip.com>
---
board/atmel/sam9x60_curiosity/MAINTAINERS | 1 +
configs/sam9x60_curiosity_mmc_defconfig | 82 +++++++++++++++++++++++
2 files changed, 83 insertions(+)
create mode 100644 configs/sam9x60_curiosity_mmc_defconfig
diff --git a/board/atmel/sam9x60_curiosity/MAINTAINERS b/board/atmel/sam9x60_curiosity/MAINTAINERS
index 84a3a9f186..3e1dce2980 100644
--- a/board/atmel/sam9x60_curiosity/MAINTAINERS
+++ b/board/atmel/sam9x60_curiosity/MAINTAINERS
@@ -4,3 +4,4 @@ M: Eugen Hristev <eugen.hristev at microchip.com>
S: Maintained
F: board/atmel/sam9x60_curiosity/
F: include/configs/sam9x60_curiosity.h
+F: configs/sam9x60_curiosity_mmc_defconfig
diff --git a/configs/sam9x60_curiosity_mmc_defconfig b/configs/sam9x60_curiosity_mmc_defconfig
new file mode 100644
index 0000000000..475f06a0c3
--- /dev/null
+++ b/configs/sam9x60_curiosity_mmc_defconfig
@@ -0,0 +1,82 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x23f00000
+CONFIG_SYS_MALLOC_LEN=0x81000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_TARGET_SAM9X60_CURIOSITY=y
+CONFIG_ATMEL_LEGACY=y
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_ENV_SIZE=0x4000
+CONFIG_DM_GPIO=y
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=200000000
+CONFIG_DEFAULT_DEVICE_TREE="at91-sam9x60_curiosity"
+CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_FIT=y
+CONFIG_SD_BOOT=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="mem=128M console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x21000000 at91-sam9x60_curiosity.dtb; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000"
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_MISC_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_HASH=y
+CONFIG_HASH_VERIFY=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_CCF=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_GENERIC_CLK=y
+CONFIG_AT91_SAM9X60_PLL=y
+CONFIG_CPU=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
+CONFIG_MICROCHIP_FLEXCOM=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ATMEL=y
+CONFIG_MTD=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_ATMEL=y
+CONFIG_ATMEL_NAND_HW_PMECC=y
+CONFIG_PMECC_CAP=8
+CONFIG_PHY_MICREL=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_TIMER=y
+CONFIG_MCHP_PIT64B_TIMER=y
+CONFIG_OF_LIBFDT_OVERLAY=y
--
2.25.1
More information about the U-Boot
mailing list