[PATCH v2] mtd: gpmi: fix the bch setting backward compatible issue

[Sean Nyekjaer]

Hi Han,

On Wed, Mar 23, 2022 at 04:24:54PM -0500, Han Xu wrote:
> Previous u-boot code changed the default bch setting behavior and caused
> backward compatible issue. This fix choose the legacy bch geometry back
> again as the default option. If the minimum ecc strength that NAND chips
> required need to be chosen, it can be enabled by either adding DT flag
> "fsl,use-minimum-ecc" or CONFIG_NAND_MXS_USE_MINIMUM_ECC in configs. The
> unused flag "fsl,legacy-bch-geometry" get removed.
> 
> Fixes: 51cdf83eea mtd: gpmi: provide the option to use legacy bch geometry
> Fixes: 616f03daba mtd: gpmi: change the BCH layout setting for large oob NAND
> Tested-by: Tim Harvey <tharvey at gateworks.com>
Tested-by: Sean Nyekjaer <sean at geanix.com>
> Signed-off-by: Han Xu <han.xu at nxp.com>
> 
> Changes in v2:
> -- change the commit log about backward compatible issue is in u-boot
> -- removed the unused flag
> -- add fixes and test tag
> ---

Changes ^ should be below the --- in order to be skipped from the commit
msg.

>  drivers/mtd/nand/raw/mxs_nand.c    | 71 ++++++++++++++++++++++++++----
>  drivers/mtd/nand/raw/mxs_nand_dt.c |  2 -
>  include/mxs_nand.h                 |  2 -
>  3 files changed, 62 insertions(+), 13 deletions(-)
> 

[ ... ]

I have only tested this with the legacy option. It seem to work :)

Thanks for finally fixing the Linux vs. U-boot unalignment.

/Sean