[EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job ring driver model
Gaurav Jain
gaurav.jain at nxp.com
Thu Mar 3 13:44:27 CET 2022
Hello Stefano
A gentle reminder!!
Need your help to check the proposed solution to fix imx6dl_mamoj SPL size issue shared in last mail.
Regards
Gaurav Jain
> -----Original Message-----
> From: Gaurav Jain
> Sent: Friday, February 25, 2022 12:33 PM
> To: Stefano Babic <sbabic at denx.de>; u-boot at lists.denx.de; Marek Vasut
> <marex at denx.de>
> Cc: Fabio Estevam <festevam at gmail.com>; Peng Fan <peng.fan at nxp.com>;
> Simon Glass <sjg at chromium.org>; Priyanka Jain <priyanka.jain at nxp.com>; Ye
> Li <ye.li at nxp.com>; Horia Geanta <horia.geanta at nxp.com>; Ji Luo
> <ji.luo at nxp.com>; Franck Lenormand <franck.lenormand at nxp.com>; Silvano Di
> Ninno <silvano.dininno at nxp.com>; Sahil Malhotra <sahil.malhotra at nxp.com>;
> Pankaj Gupta <pankaj.gupta at nxp.com>; Varun Sethi <V.Sethi at nxp.com>; dl-
> uboot-imx <uboot-imx at nxp.com>; Shengzhou Liu <shengzhou.liu at nxp.com>;
> Mingkai Hu <mingkai.hu at nxp.com>; Rajesh Bhagat <rajesh.bhagat at nxp.com>;
> Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>; Wasim Khan
> <wasim.khan at nxp.com>; Alison Wang <alison.wang at nxp.com>; Pramod
> Kumar <pramod.kumar_1 at nxp.com>; Andy Tang <andy.tang at nxp.com>;
> Adrian Alonso <adrian.alonso at nxp.com>; Vladimir Oltean <olteanv at gmail.com>
> Subject: RE: [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for CAAM Job
> ring driver model
>
> Hello Stefano
>
> > -----Original Message-----
> > From: Gaurav Jain
> > Sent: Friday, February 11, 2022 3:09 PM
> > To: Stefano Babic <sbabic at denx.de>; u-boot at lists.denx.de; Marek Vasut
> > <marex at denx.de>
> > Cc: Fabio Estevam <festevam at gmail.com>; Peng Fan <peng.fan at nxp.com>;
> > Simon Glass <sjg at chromium.org>; Priyanka Jain <priyanka.jain at nxp.com>;
> > Ye Li <ye.li at nxp.com>; Horia Geanta <horia.geanta at nxp.com>; Ji Luo
> > <ji.luo at nxp.com>; Franck Lenormand <franck.lenormand at nxp.com>; Silvano
> > Di Ninno <silvano.dininno at nxp.com>; Sahil Malhotra
> > <sahil.malhotra at nxp.com>; Pankaj Gupta <pankaj.gupta at nxp.com>; Varun
> > Sethi <V.Sethi at nxp.com>; dl- uboot-imx <uboot-imx at nxp.com>; Shengzhou
> > Liu <shengzhou.liu at nxp.com>; Mingkai Hu <mingkai.hu at nxp.com>; Rajesh
> > Bhagat <rajesh.bhagat at nxp.com>; Meenakshi Aggarwal
> > <meenakshi.aggarwal at nxp.com>; Wasim Khan <wasim.khan at nxp.com>;
> Alison
> > Wang <alison.wang at nxp.com>; Pramod Kumar
> <pramod.kumar_1 at nxp.com>;
> > Andy Tang <andy.tang at nxp.com>; Adrian Alonso <adrian.alonso at nxp.com>;
> > Vladimir Oltean <olteanv at gmail.com>
> > Subject: RE: [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for
> > CAAM Job ring driver model
> >
> > Hello Marek
> >
> > A gentle reminder!!
> > Please help to check if some feature can be dropped in SPL from
> > imx6dl_mamoj board so that CAAM driver model patches can be accepted.
> >
> > Regards
> > Gaurav Jain
> >
> > > -----Original Message-----
> > > From: Gaurav Jain
> > > Sent: Monday, February 7, 2022 12:43 PM
> > > To: Stefano Babic <sbabic at denx.de>; u-boot at lists.denx.de; Marek
> > > Vasut <marex at denx.de>
> > > Cc: Fabio Estevam <festevam at gmail.com>; Peng Fan <peng.fan at nxp.com>;
> > > Simon Glass <sjg at chromium.org>; Priyanka Jain
> > > <priyanka.jain at nxp.com>; Ye Li <ye.li at nxp.com>; Horia Geanta
> > > <horia.geanta at nxp.com>; Ji Luo <ji.luo at nxp.com>; Franck Lenormand
> > > <franck.lenormand at nxp.com>; Silvano Di Ninno
> > > <silvano.dininno at nxp.com>; Sahil Malhotra <sahil.malhotra at nxp.com>;
> > > Pankaj Gupta <pankaj.gupta at nxp.com>; Varun Sethi <V.Sethi at nxp.com>;
> > > dl- uboot-imx <uboot-imx at nxp.com>; Shengzhou Liu
> > > <shengzhou.liu at nxp.com>; Mingkai Hu <mingkai.hu at nxp.com>; Rajesh
> > > Bhagat <rajesh.bhagat at nxp.com>; Meenakshi Aggarwal
> > > <meenakshi.aggarwal at nxp.com>; Wasim Khan <wasim.khan at nxp.com>;
> > Alison
> > > Wang <alison.wang at nxp.com>; Pramod Kumar
> > <pramod.kumar_1 at nxp.com>;
> > > Andy Tang <andy.tang at nxp.com>; Adrian Alonso
> > > <adrian.alonso at nxp.com>; Vladimir Oltean <olteanv at gmail.com>
> > > Subject: RE: [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for
> > > CAAM Job ring driver model
> > >
> > > Hello Marek
> > >
> > > > -----Original Message-----
> > > > From: Stefano Babic <sbabic at denx.de>
> > > > Sent: Saturday, February 5, 2022 7:46 PM
> > > > To: Gaurav Jain <gaurav.jain at nxp.com>; u-boot at lists.denx.de
> > > > Cc: Stefano Babic <sbabic at denx.de>; Fabio Estevam
> > > > <festevam at gmail.com>; Peng Fan <peng.fan at nxp.com>; Simon Glass
> > > > <sjg at chromium.org>; Priyanka Jain <priyanka.jain at nxp.com>; Ye Li
> > > > <ye.li at nxp.com>; Horia Geanta <horia.geanta at nxp.com>; Ji Luo
> > > > <ji.luo at nxp.com>; Franck Lenormand <franck.lenormand at nxp.com>;
> > > > Silvano Di Ninno <silvano.dininno at nxp.com>; Sahil Malhotra
> > > > <sahil.malhotra at nxp.com>; Pankaj Gupta <pankaj.gupta at nxp.com>;
> > > > Varun Sethi <V.Sethi at nxp.com>; dl-uboot-imx <uboot-imx at nxp.com>;
> > > > Shengzhou Liu <shengzhou.liu at nxp.com>; Mingkai Hu
> > > > <mingkai.hu at nxp.com>; Rajesh Bhagat <rajesh.bhagat at nxp.com>;
> > > > Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>; Wasim Khan
> > > > <wasim.khan at nxp.com>;
> > > Alison
> > > > Wang <alison.wang at nxp.com>; Pramod Kumar
> > > <pramod.kumar_1 at nxp.com>;
> > > > Andy Tang <andy.tang at nxp.com>; Adrian Alonso
> > > > <adrian.alonso at nxp.com>; Vladimir Oltean <olteanv at gmail.com>;
> > > > Marek Vasut <marex at denx.de>
> > > > Subject: [EXT] Re: [PATCH v8 01/15] crypto/fsl: Add support for
> > > > CAAM Job ring driver model
> > > >
> > > > Caution: EXT Email
> > > >
> > > > Hi Gaurav,
> > > >
> > > > rather I still have issues to run CI with this applied. The reason
> > > > is that this adds an overhead to SPL and it breaks the board
> > > > imx6dl_mamoj because SPL exceeds the maximum size for a DL SOC.
> > > >
> > > > See
> > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2F
> > > > so
> > > > ur
> > > > ce.d
> > > > enx.de%2Fu-boot%2Fcustodians%2Fu-boot-imx%2F-
> > > > %2Fjobs%2F387370&data=04%7C01%7Cgaurav.jain%40nxp.com%7C
> 3a
> > 2
> > > 73
> > > >
> > >
> >
> 1dd27fc4bebcad308d9e8b21464%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C
> > > >
> > >
> >
> 0%7C0%7C637796673834942697%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4
> > > >
> > >
> >
> wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&am
> > > >
> > >
> >
> p;sdata=pI%2F%2FlNtrdrGCa8sSvcr6uNu4jze7pzDqZtI52FIDj50%3D&reserve
> > > > d=0
> > > >
> > > > I do not know if it is possible to drop some features from SPL for
> > > > this board (Added Marek as board maintainer).
>
> As we have not received any response from imx6dl_mamoj board maintainer.
> I propose the below solution
>
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -49,8 +49,8 @@ config USE_IMXIMG_PLUGIN config IMX_HAB
> - select FSL_CAAM if HAS_CAAM
> - imply CMD_DEKBLOB if HAS_CAAM
> + imply FSL_CAAM if HAS_CAAM
> + imply CMD_DEKBLOB if FSL_CAAM
> Help
>
> --- a/configs/imx6dl_mamoj_defconfig
> +++ b/configs/imx6dl_mamoj_defconfig
> @@ -59,3 +59,4 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL"
> +CONFIG_FSL_CAAM=n
>
> Need your help to review this or suggest any other solution.
>
> Regards
> Gaurav Jain
>
> > >
> > > CONFIG_IMX_HAB is enabled for imx6dl_mamoj. So CAAM is built for
> > > SPL, results in increased size.
> > > However CAAM is not initialized in SPL. As Stefano suggested, Can
> > > you drop some features from SPL?
> > >
> > > Regards
> > > Gaurav Jain
> > > >
> > > > Best regards,
> > > > Stefano
> > > >
> > > > On 10.01.22 13:27, Gaurav Jain wrote:
> > > > > added device tree support for job ring driver.
> > > > > sec is initialized based on job ring information processed from
> > > > > device tree.
> > > > >
> > > > > Signed-off-by: Gaurav Jain <gaurav.jain at nxp.com>
> > > > > Reviewed-by: Ye Li <ye.li at nxp.com>
> > > > > ---
> > > > > drivers/crypto/fsl/jr.c | 323 ++++++++++++++++++++++++++--------------
> > > > > drivers/crypto/fsl/jr.h | 31 +++-
> > > > > 2 files changed, 240 insertions(+), 114 deletions(-)
> > > > >
> > > > > diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c
> > > > > index
> > > > > 22b649219e..8103987425 100644
> > > > > --- a/drivers/crypto/fsl/jr.c
> > > > > +++ b/drivers/crypto/fsl/jr.c
> > > > > @@ -1,7 +1,7 @@
> > > > > // SPDX-License-Identifier: GPL-2.0+
> > > > > /*
> > > > > * Copyright 2008-2014 Freescale Semiconductor, Inc.
> > > > > - * Copyright 2018 NXP
> > > > > + * Copyright 2018, 2021 NXP
> > > > > *
> > > > > * Based on CAAM driver in drivers/crypto/caam in Linux
> > > > > */
> > > > > @@ -11,7 +11,6 @@
> > > > > #include <linux/kernel.h>
> > > > > #include <log.h>
> > > > > #include <malloc.h>
> > > > > -#include "fsl_sec.h"
> > > > > #include "jr.h"
> > > > > #include "jobdesc.h"
> > > > > #include "desc_constr.h"
> > > > > @@ -21,7 +20,10 @@
> > > > > #include <asm/cache.h>
> > > > > #include <asm/fsl_pamu.h>
> > > > > #endif
> > > > > +#include <dm.h>
> > > > > #include <dm/lists.h>
> > > > > +#include <dm/root.h>
> > > > > +#include <dm/device-internal.h>
> > > > > #include <linux/delay.h>
> > > > >
> > > > > #define CIRC_CNT(head, tail, size) (((head) - (tail)) & (size
> > > > > -
> > > > > 1)) @@ -35,20 +37,29 @@ uint32_t
> > > > sec_offset[CONFIG_SYS_FSL_MAX_NUM_OF_SEC] = {
> > > > > #endif
> > > > > };
> > > > >
> > > > > +#if CONFIG_IS_ENABLED(DM)
> > > > > +struct udevice *caam_dev;
> > > > > +#else
> > > > > #define SEC_ADDR(idx) \
> > > > > (ulong)((CONFIG_SYS_FSL_SEC_ADDR + sec_offset[idx]))
> > > > >
> > > > > #define SEC_JR0_ADDR(idx) \
> > > > > (ulong)(SEC_ADDR(idx) + \
> > > > > (CONFIG_SYS_FSL_JR0_OFFSET - CONFIG_SYS_FSL_SEC_OFFSET))
> > > > > +struct caam_regs caam_st;
> > > > > +#endif
> > > > >
> > > > > -struct jobring jr0[CONFIG_SYS_FSL_MAX_NUM_OF_SEC];
> > > > > +static inline u32 jr_start_reg(u8 jrid) {
> > > > > + return (1 << jrid);
> > > > > +}
> > > > >
> > > > > -static inline void start_jr0(uint8_t sec_idx)
> > > > > +static inline void start_jr(struct caam_regs *caam)
> > > > > {
> > > > > - ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx);
> > > > > + ccsr_sec_t *sec = caam->sec;
> > > > > u32 ctpr_ms = sec_in32(&sec->ctpr_ms);
> > > > > u32 scfgr = sec_in32(&sec->scfgr);
> > > > > + u32 jrstart = jr_start_reg(caam->jrid);
> > > > >
> > > > > if (ctpr_ms & SEC_CTPR_MS_VIRT_EN_INCL) {
> > > > > /* VIRT_EN_INCL = 1 & VIRT_EN_POR = 1 or @@ -56,23
> > > > > +67,16 @@ static inline void start_jr0(uint8_t sec_idx)
> > > > > */
> > > > > if ((ctpr_ms & SEC_CTPR_MS_VIRT_EN_POR) ||
> > > > > (scfgr & SEC_SCFGR_VIRT_EN))
> > > > > - sec_out32(&sec->jrstartr, CONFIG_JRSTARTR_JR0);
> > > > > + sec_out32(&sec->jrstartr, jrstart);
> > > > > } else {
> > > > > /* VIRT_EN_INCL = 0 && VIRT_EN_POR_VALUE = 1 */
> > > > > if (ctpr_ms & SEC_CTPR_MS_VIRT_EN_POR)
> > > > > - sec_out32(&sec->jrstartr, CONFIG_JRSTARTR_JR0);
> > > > > + sec_out32(&sec->jrstartr, jrstart);
> > > > > }
> > > > > }
> > > > >
> > > > > -static inline void jr_reset_liodn(uint8_t sec_idx)
> > > > > +static inline void jr_disable_irq(struct jr_regs *regs)
> > > > > {
> > > > > - ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx);
> > > > > - sec_out32(&sec->jrliodnr[0].ls, 0);
> > > > > -}
> > > > > -
> > > > > -static inline void jr_disable_irq(uint8_t sec_idx) -{
> > > > > - struct jr_regs *regs = (struct jr_regs *)SEC_JR0_ADDR(sec_idx);
> > > > > uint32_t jrcfg = sec_in32(®s->jrcfg1);
> > > > >
> > > > > jrcfg = jrcfg | JR_INTMASK; @@ -80,10 +84,10 @@ static
> > > > > inline void jr_disable_irq(uint8_t sec_idx)
> > > > > sec_out32(®s->jrcfg1, jrcfg);
> > > > > }
> > > > >
> > > > > -static void jr_initregs(uint8_t sec_idx)
> > > > > +static void jr_initregs(uint8_t sec_idx, struct caam_regs
> > > > > +*caam)
> > > > > {
> > > > > - struct jr_regs *regs = (struct jr_regs *)SEC_JR0_ADDR(sec_idx);
> > > > > - struct jobring *jr = &jr0[sec_idx];
> > > > > + struct jr_regs *regs = caam->regs;
> > > > > + struct jobring *jr = &caam->jr[sec_idx];
> > > > > caam_dma_addr_t ip_base = virt_to_phys((void *)jr->input_ring);
> > > > > caam_dma_addr_t op_base = virt_to_phys((void
> > > > > *)jr->output_ring);
> > > > >
> > > > > @@ -103,16 +107,16 @@ static void jr_initregs(uint8_t sec_idx)
> > > > > sec_out32(®s->irs, JR_SIZE);
> > > > >
> > > > > if (!jr->irq)
> > > > > - jr_disable_irq(sec_idx);
> > > > > + jr_disable_irq(regs);
> > > > > }
> > > > >
> > > > > -static int jr_init(uint8_t sec_idx)
> > > > > +static int jr_init(uint8_t sec_idx, struct caam_regs *caam)
> > > > > {
> > > > > - struct jobring *jr = &jr0[sec_idx];
> > > > > + struct jobring *jr = &caam->jr[sec_idx];
> > > > >
> > > > > memset(jr, 0, sizeof(struct jobring));
> > > > >
> > > > > - jr->jq_id = DEFAULT_JR_ID;
> > > > > + jr->jq_id = caam->jrid;
> > > > > jr->irq = DEFAULT_IRQ;
> > > > >
> > > > > #ifdef CONFIG_FSL_CORENET
> > > > > @@ -134,53 +138,8 @@ static int jr_init(uint8_t sec_idx)
> > > > > memset(jr->input_ring, 0, JR_SIZE * sizeof(caam_dma_addr_t));
> > > > > memset(jr->output_ring, 0, jr->op_size);
> > > > >
> > > > > - start_jr0(sec_idx);
> > > > > -
> > > > > - jr_initregs(sec_idx);
> > > > > -
> > > > > - return 0;
> > > > > -}
> > > > > -
> > > > > -static int jr_sw_cleanup(uint8_t sec_idx) -{
> > > > > - struct jobring *jr = &jr0[sec_idx];
> > > > > -
> > > > > - jr->head = 0;
> > > > > - jr->tail = 0;
> > > > > - jr->read_idx = 0;
> > > > > - jr->write_idx = 0;
> > > > > - memset(jr->info, 0, sizeof(jr->info));
> > > > > - memset(jr->input_ring, 0, jr->size * sizeof(caam_dma_addr_t));
> > > > > - memset(jr->output_ring, 0, jr->size * sizeof(struct op_ring));
> > > > > -
> > > > > - return 0;
> > > > > -}
> > > > > -
> > > > > -static int jr_hw_reset(uint8_t sec_idx) -{
> > > > > - struct jr_regs *regs = (struct jr_regs *)SEC_JR0_ADDR(sec_idx);
> > > > > - uint32_t timeout = 100000;
> > > > > - uint32_t jrint, jrcr;
> > > > > -
> > > > > - sec_out32(®s->jrcr, JRCR_RESET);
> > > > > - do {
> > > > > - jrint = sec_in32(®s->jrint);
> > > > > - } while (((jrint & JRINT_ERR_HALT_MASK) ==
> > > > > - JRINT_ERR_HALT_INPROGRESS) && --timeout);
> > > > > -
> > > > > - jrint = sec_in32(®s->jrint);
> > > > > - if (((jrint & JRINT_ERR_HALT_MASK) !=
> > > > > - JRINT_ERR_HALT_INPROGRESS) && timeout == 0)
> > > > > - return -1;
> > > > > -
> > > > > - timeout = 100000;
> > > > > - sec_out32(®s->jrcr, JRCR_RESET);
> > > > > - do {
> > > > > - jrcr = sec_in32(®s->jrcr);
> > > > > - } while ((jrcr & JRCR_RESET) && --timeout);
> > > > > -
> > > > > - if (timeout == 0)
> > > > > - return -1;
> > > > > + start_jr(caam);
> > > > > + jr_initregs(sec_idx, caam);
> > > > >
> > > > > return 0;
> > > > > }
> > > > > @@ -188,10 +147,10 @@ static int jr_hw_reset(uint8_t sec_idx)
> > > > > /* -1 --- error, can't enqueue -- no space available */
> > > > > static int jr_enqueue(uint32_t *desc_addr,
> > > > > void (*callback)(uint32_t status, void *arg),
> > > > > - void *arg, uint8_t sec_idx)
> > > > > + void *arg, uint8_t sec_idx, struct caam_regs *caam)
> > > > > {
> > > > > - struct jr_regs *regs = (struct jr_regs *)SEC_JR0_ADDR(sec_idx);
> > > > > - struct jobring *jr = &jr0[sec_idx];
> > > > > + struct jr_regs *regs = caam->regs;
> > > > > + struct jobring *jr = &caam->jr[sec_idx];
> > > > > int head = jr->head;
> > > > > uint32_t desc_word;
> > > > > int length = desc_len(desc_addr); @@ -263,10 +222,10 @@
> > > > > static int jr_enqueue(uint32_t *desc_addr,
> > > > > return 0;
> > > > > }
> > > > >
> > > > > -static int jr_dequeue(int sec_idx)
> > > > > +static int jr_dequeue(int sec_idx, struct caam_regs *caam)
> > > > > {
> > > > > - struct jr_regs *regs = (struct jr_regs *)SEC_JR0_ADDR(sec_idx);
> > > > > - struct jobring *jr = &jr0[sec_idx];
> > > > > + struct jr_regs *regs = caam->regs;
> > > > > + struct jobring *jr = &caam->jr[sec_idx];
> > > > > int head = jr->head;
> > > > > int tail = jr->tail;
> > > > > int idx, i, found;
> > > > > @@ -349,14 +308,18 @@ static void desc_done(uint32_t status, void
> *arg)
> > > > > {
> > > > > struct result *x = arg;
> > > > > x->status = status;
> > > > > -#ifndef CONFIG_SPL_BUILD
> > > > > caam_jr_strstatus(status); -#endif
> > > > > x->done = 1;
> > > > > }
> > > > >
> > > > > static inline int run_descriptor_jr_idx(uint32_t *desc, uint8_t sec_idx)
> > > > > {
> > > > > + struct caam_regs *caam;
> > > > > +#if CONFIG_IS_ENABLED(DM)
> > > > > + caam = dev_get_priv(caam_dev); #else
> > > > > + caam = &caam_st;
> > > > > +#endif
> > > > > unsigned long long timeval = 0;
> > > > > unsigned long long timeout = CONFIG_USEC_DEQ_TIMEOUT;
> > > > > struct result op;
> > > > > @@ -364,7 +327,7 @@ static inline int
> > > > > run_descriptor_jr_idx(uint32_t *desc, uint8_t sec_idx)
> > > > >
> > > > > memset(&op, 0, sizeof(op));
> > > > >
> > > > > - ret = jr_enqueue(desc, desc_done, &op, sec_idx);
> > > > > + ret = jr_enqueue(desc, desc_done, &op, sec_idx, caam);
> > > > > if (ret) {
> > > > > debug("Error in SEC enq\n");
> > > > > ret = JQ_ENQ_ERR;
> > > > > @@ -375,7 +338,7 @@ static inline int
> > > > > run_descriptor_jr_idx(uint32_t *desc,
> > > > uint8_t sec_idx)
> > > > > udelay(1);
> > > > > timeval += 1;
> > > > >
> > > > > - ret = jr_dequeue(sec_idx);
> > > > > + ret = jr_dequeue(sec_idx, caam);
> > > > > if (ret) {
> > > > > debug("Error in SEC deq\n");
> > > > > ret = JQ_DEQ_ERR; @@ -402,13 +365,62 @@
> > > > > int run_descriptor_jr(uint32_t *desc)
> > > > > return run_descriptor_jr_idx(desc, 0);
> > > > > }
> > > > >
> > > > > +static int jr_sw_cleanup(uint8_t sec_idx, struct caam_regs *caam) {
> > > > > + struct jobring *jr = &caam->jr[sec_idx];
> > > > > +
> > > > > + jr->head = 0;
> > > > > + jr->tail = 0;
> > > > > + jr->read_idx = 0;
> > > > > + jr->write_idx = 0;
> > > > > + memset(jr->info, 0, sizeof(jr->info));
> > > > > + memset(jr->input_ring, 0, jr->size * sizeof(caam_dma_addr_t));
> > > > > + memset(jr->output_ring, 0, jr->size * sizeof(struct
> > > > > + op_ring));
> > > > > +
> > > > > + return 0;
> > > > > +}
> > > > > +
> > > > > +static int jr_hw_reset(struct jr_regs *regs) {
> > > > > + uint32_t timeout = 100000;
> > > > > + uint32_t jrint, jrcr;
> > > > > +
> > > > > + sec_out32(®s->jrcr, JRCR_RESET);
> > > > > + do {
> > > > > + jrint = sec_in32(®s->jrint);
> > > > > + } while (((jrint & JRINT_ERR_HALT_MASK) ==
> > > > > + JRINT_ERR_HALT_INPROGRESS) && --timeout);
> > > > > +
> > > > > + jrint = sec_in32(®s->jrint);
> > > > > + if (((jrint & JRINT_ERR_HALT_MASK) !=
> > > > > + JRINT_ERR_HALT_INPROGRESS) && timeout == 0)
> > > > > + return -1;
> > > > > +
> > > > > + timeout = 100000;
> > > > > + sec_out32(®s->jrcr, JRCR_RESET);
> > > > > + do {
> > > > > + jrcr = sec_in32(®s->jrcr);
> > > > > + } while ((jrcr & JRCR_RESET) && --timeout);
> > > > > +
> > > > > + if (timeout == 0)
> > > > > + return -1;
> > > > > +
> > > > > + return 0;
> > > > > +}
> > > > > +
> > > > > static inline int jr_reset_sec(uint8_t sec_idx)
> > > > > {
> > > > > - if (jr_hw_reset(sec_idx) < 0)
> > > > > + struct caam_regs *caam;
> > > > > +#if CONFIG_IS_ENABLED(DM)
> > > > > + caam = dev_get_priv(caam_dev); #else
> > > > > + caam = &caam_st;
> > > > > +#endif
> > > > > + if (jr_hw_reset(caam->regs) < 0)
> > > > > return -1;
> > > > >
> > > > > /* Clean up the jobring structure maintained by software */
> > > > > - jr_sw_cleanup(sec_idx);
> > > > > + jr_sw_cleanup(sec_idx, caam);
> > > > >
> > > > > return 0;
> > > > > }
> > > > > @@ -418,9 +430,15 @@ int jr_reset(void)
> > > > > return jr_reset_sec(0);
> > > > > }
> > > > >
> > > > > -static inline int sec_reset_idx(uint8_t sec_idx)
> > > > > +int sec_reset(void)
> > > > > {
> > > > > - ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx);
> > > > > + struct caam_regs *caam;
> > > > > +#if CONFIG_IS_ENABLED(DM)
> > > > > + caam = dev_get_priv(caam_dev); #else
> > > > > + caam = &caam_st;
> > > > > +#endif
> > > > > + ccsr_sec_t *sec = caam->sec;
> > > > > uint32_t mcfgr = sec_in32(&sec->mcfgr);
> > > > > uint32_t timeout = 100000;
> > > > >
> > > > > @@ -446,11 +464,7 @@ static inline int sec_reset_idx(uint8_t
> > > > > sec_idx)
> > > > >
> > > > > return 0;
> > > > > }
> > > > > -int sec_reset(void)
> > > > > -{
> > > > > - return sec_reset_idx(0);
> > > > > -}
> > > > > -#ifndef CONFIG_SPL_BUILD
> > > > > +
> > > > > static int deinstantiate_rng(u8 sec_idx, int state_handle_mask)
> > > > > {
> > > > > u32 *desc;
> > > > > @@ -496,12 +510,11 @@ static int deinstantiate_rng(u8 sec_idx,
> > > > > int
> > > > state_handle_mask)
> > > > > return ret;
> > > > > }
> > > > >
> > > > > -static int instantiate_rng(u8 sec_idx, int gen_sk)
> > > > > +static int instantiate_rng(uint8_t sec_idx, ccsr_sec_t *sec,
> > > > > +int
> > > > > +gen_sk)
> > > > > {
> > > > > u32 *desc;
> > > > > u32 rdsta_val;
> > > > > int ret = 0, sh_idx, size;
> > > > > - ccsr_sec_t __iomem *sec = (ccsr_sec_t __iomem
> *)SEC_ADDR(sec_idx);
> > > > > struct rng4tst __iomem *rng =
> > > > > (struct rng4tst __iomem *)&sec->rng;
> > > > >
> > > > > @@ -554,9 +567,8 @@ static int instantiate_rng(u8 sec_idx, int gen_sk)
> > > > > return ret;
> > > > > }
> > > > >
> > > > > -static u8 get_rng_vid(uint8_t sec_idx)
> > > > > +static u8 get_rng_vid(ccsr_sec_t *sec)
> > > > > {
> > > > > - ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx);
> > > > > u8 vid;
> > > > >
> > > > > if (caam_get_era() < 10) { @@ -574,9 +586,8 @@ static u8
> > > > > get_rng_vid(uint8_t sec_idx)
> > > > > * By default, the TRNG runs for 200 clocks per sample;
> > > > > * 1200 clocks per sample generates better entropy.
> > > > > */
> > > > > -static void kick_trng(int ent_delay, uint8_t sec_idx)
> > > > > +static void kick_trng(int ent_delay, ccsr_sec_t *sec)
> > > > > {
> > > > > - ccsr_sec_t __iomem *sec = (ccsr_sec_t __iomem
> *)SEC_ADDR(sec_idx);
> > > > > struct rng4tst __iomem *rng =
> > > > > (struct rng4tst __iomem *)&sec->rng;
> > > > > u32 val;
> > > > > @@ -603,10 +614,9 @@ static void kick_trng(int ent_delay,
> > > > > uint8_t
> > sec_idx)
> > > > > sec_clrbits32(&rng->rtmctl, RTMCTL_PRGM);
> > > > > }
> > > > >
> > > > > -static int rng_init(uint8_t sec_idx)
> > > > > +static int rng_init(uint8_t sec_idx, ccsr_sec_t *sec)
> > > > > {
> > > > > int ret, gen_sk, ent_delay = RTSDCTL_ENT_DLY_MIN;
> > > > > - ccsr_sec_t __iomem *sec = (ccsr_sec_t __iomem
> *)SEC_ADDR(sec_idx);
> > > > > struct rng4tst __iomem *rng =
> > > > > (struct rng4tst __iomem *)&sec->rng;
> > > > > u32 inst_handles;
> > > > > @@ -624,7 +634,7 @@ static int rng_init(uint8_t sec_idx)
> > > > > * the TRNG parameters.
> > > > > */
> > > > > if (!inst_handles) {
> > > > > - kick_trng(ent_delay, sec_idx);
> > > > > + kick_trng(ent_delay, sec);
> > > > > ent_delay += 400;
> > > > > }
> > > > > /*
> > > > > @@ -634,7 +644,7 @@ static int rng_init(uint8_t sec_idx)
> > > > > * interval, leading to a sucessful initialization of
> > > > > * the RNG.
> > > > > */
> > > > > - ret = instantiate_rng(sec_idx, gen_sk);
> > > > > + ret = instantiate_rng(sec_idx, sec, gen_sk);
> > > > > } while ((ret == -1) && (ent_delay < RTSDCTL_ENT_DLY_MAX));
> > > > > if (ret) {
> > > > > printf("SEC%u: Failed to instantiate RNG\n",
> > > > > sec_idx); @@ -646,13 +656,28 @@ static int rng_init(uint8_t
> > > > > sec_idx)
> > > > >
> > > > > return ret;
> > > > > }
> > > > > -#endif
> > > > > +
> > > > > int sec_init_idx(uint8_t sec_idx)
> > > > > {
> > > > > - ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx);
> > > > > - uint32_t mcr = sec_in32(&sec->mcfgr);
> > > > > int ret = 0;
> > > > > -
> > > > > + struct caam_regs *caam;
> > > > > +#if CONFIG_IS_ENABLED(DM)
> > > > > + if (!caam_dev) {
> > > > > + printf("caam_jr: caam not found\n");
> > > > > + return -1;
> > > > > + }
> > > > > + caam = dev_get_priv(caam_dev); #else
> > > > > + caam_st.sec = (void *)SEC_ADDR(sec_idx);
> > > > > + caam_st.regs = (struct jr_regs *)SEC_JR0_ADDR(sec_idx);
> > > > > + caam_st.jrid = 0;
> > > > > + caam = &caam_st;
> > > > > +#endif
> > > > > + ccsr_sec_t *sec = caam->sec;
> > > > > + uint32_t mcr = sec_in32(&sec->mcfgr); #if
> > > > > +defined(CONFIG_SPL_BUILD) && defined(CONFIG_IMX8M)
> > > > > + uint32_t jrdid_ms = 0;
> > > > > +#endif
> > > > > #ifdef CONFIG_FSL_CORENET
> > > > > uint32_t liodnr;
> > > > > uint32_t liodn_ns;
> > > > > @@ -682,6 +707,11 @@ int sec_init_idx(uint8_t sec_idx)
> > > > > mcr |= (1 << MCFGR_PS_SHIFT);
> > > > > #endif
> > > > > sec_out32(&sec->mcfgr, mcr);
> > > > > +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_IMX8M)
> > > > > + jrdid_ms = JRDID_MS_TZ_OWN | JRDID_MS_PRIM_TZ |
> > > > JRDID_MS_PRIM_DID;
> > > > > + sec_out32(&sec->jrliodnr[caam->jrid].ms, jrdid_ms); #endif
> > > > > + jr_reset();
> > > > >
> > > > > #ifdef CONFIG_FSL_CORENET
> > > > > #ifdef CONFIG_SPL_BUILD
> > > > > @@ -693,20 +723,19 @@ int sec_init_idx(uint8_t sec_idx)
> > > > > liodn_ns = CONFIG_SPL_JR0_LIODN_NS & JRNSLIODN_MASK;
> > > > > liodn_s = CONFIG_SPL_JR0_LIODN_S & JRSLIODN_MASK;
> > > > >
> > > > > - liodnr = sec_in32(&sec->jrliodnr[0].ls) &
> > > > > + liodnr = sec_in32(&sec->jrliodnr[caam->jrid].ls) &
> > > > > ~(JRNSLIODN_MASK | JRSLIODN_MASK);
> > > > > liodnr = liodnr |
> > > > > (liodn_ns << JRNSLIODN_SHIFT) |
> > > > > (liodn_s << JRSLIODN_SHIFT);
> > > > > - sec_out32(&sec->jrliodnr[0].ls, liodnr);
> > > > > + sec_out32(&sec->jrliodnr[caam->jrid].ls, liodnr);
> > > > > #else
> > > > > - liodnr = sec_in32(&sec->jrliodnr[0].ls);
> > > > > + liodnr = sec_in32(&sec->jrliodnr[caam->jrid].ls);
> > > > > liodn_ns = (liodnr & JRNSLIODN_MASK) >> JRNSLIODN_SHIFT;
> > > > > liodn_s = (liodnr & JRSLIODN_MASK) >> JRSLIODN_SHIFT;
> > > > > #endif
> > > > > #endif
> > > > > -
> > > > > - ret = jr_init(sec_idx);
> > > > > + ret = jr_init(sec_idx, caam);
> > > > > if (ret < 0) {
> > > > > printf("SEC%u: initialization failed\n", sec_idx);
> > > > > return -1;
> > > > > @@ -719,9 +748,9 @@ int sec_init_idx(uint8_t sec_idx)
> > > > >
> > > > > pamu_enable();
> > > > > #endif
> > > > > -#ifndef CONFIG_SPL_BUILD
> > > > > - if (get_rng_vid(sec_idx) >= 4) {
> > > > > - if (rng_init(sec_idx) < 0) {
> > > > > +
> > > > > + if (get_rng_vid(caam->sec) >= 4) {
> > > > > + if (rng_init(sec_idx, caam->sec) < 0) {
> > > > > printf("SEC%u: RNG instantiation failed\n", sec_idx);
> > > > > return -1;
> > > > > }
> > > > > @@ -735,7 +764,6 @@ int sec_init_idx(uint8_t sec_idx)
> > > > >
> > > > > printf("SEC%u: RNG instantiated\n", sec_idx);
> > > > > }
> > > > > -#endif
> > > > > return ret;
> > > > > }
> > > > >
> > > > > @@ -743,3 +771,76 @@ int sec_init(void)
> > > > > {
> > > > > return sec_init_idx(0);
> > > > > }
> > > > > +
> > > > > +#if CONFIG_IS_ENABLED(DM)
> > > > > +static int caam_jr_ioctl(struct udevice *dev, unsigned long
> > > > > +request, void *buf) {
> > > > > + if (request != CAAM_JR_RUN_DESC)
> > > > > + return -ENOSYS;
> > > > > +
> > > > > + return run_descriptor_jr(buf); }
> > > > > +
> > > > > +static int caam_jr_probe(struct udevice *dev) {
> > > > > + struct caam_regs *caam = dev_get_priv(dev);
> > > > > + fdt_addr_t addr;
> > > > > + ofnode node;
> > > > > + unsigned int jr_node = 0;
> > > > > +
> > > > > + caam_dev = dev;
> > > > > +
> > > > > + addr = dev_read_addr(dev);
> > > > > + if (addr == FDT_ADDR_T_NONE) {
> > > > > + printf("caam_jr: crypto not found\n");
> > > > > + return -EINVAL;
> > > > > + }
> > > > > + caam->sec = (ccsr_sec_t *)(uintptr_t)addr;
> > > > > + caam->regs = (struct jr_regs *)caam->sec;
> > > > > +
> > > > > + /* Check for enabled job ring node */
> > > > > + ofnode_for_each_subnode(node, dev_ofnode(dev)) {
> > > > > + if (!ofnode_is_available(node))
> > > > > + continue;
> > > > > +
> > > > > + jr_node = ofnode_read_u32_default(node, "reg", -1);
> > > > > + if (jr_node > 0) {
> > > > > + caam->regs = (struct jr_regs *)((ulong)caam->sec + jr_node);
> > > > > + while (!(jr_node & 0x0F))
> > > > > + jr_node = jr_node >> 4;
> > > > > +
> > > > > + caam->jrid = jr_node - 1;
> > > > > + break;
> > > > > + }
> > > > > + }
> > > > > +
> > > > > + if (sec_init())
> > > > > + printf("\nsec_init failed!\n");
> > > > > +
> > > > > + return 0;
> > > > > +}
> > > > > +
> > > > > +static int caam_jr_bind(struct udevice *dev) {
> > > > > + return 0;
> > > > > +}
> > > > > +
> > > > > +static const struct misc_ops caam_jr_ops = {
> > > > > + .ioctl = caam_jr_ioctl,
> > > > > +};
> > > > > +
> > > > > +static const struct udevice_id caam_jr_match[] = {
> > > > > + { .compatible = "fsl,sec-v4.0" },
> > > > > + { }
> > > > > +};
> > > > > +
> > > > > +U_BOOT_DRIVER(caam_jr) = {
> > > > > + .name = "caam_jr",
> > > > > + .id = UCLASS_MISC,
> > > > > + .of_match = caam_jr_match,
> > > > > + .ops = &caam_jr_ops,
> > > > > + .bind = caam_jr_bind,
> > > > > + .probe = caam_jr_probe,
> > > > > + .priv_auto = sizeof(struct caam_regs),
> > > > > +};
> > > > > +#endif
> > > > > diff --git a/drivers/crypto/fsl/jr.h b/drivers/crypto/fsl/jr.h
> > > > > index 1047aa772c..3eb7be79da 100644
> > > > > --- a/drivers/crypto/fsl/jr.h
> > > > > +++ b/drivers/crypto/fsl/jr.h
> > > > > @@ -1,6 +1,7 @@
> > > > > /* SPDX-License-Identifier: GPL-2.0+ */
> > > > > /*
> > > > > * Copyright 2008-2014 Freescale Semiconductor, Inc.
> > > > > + * Copyright 2021 NXP
> > > > > *
> > > > > */
> > > > >
> > > > > @@ -8,7 +9,9 @@
> > > > > #define __JR_H
> > > > >
> > > > > #include <linux/compiler.h>
> > > > > +#include "fsl_sec.h"
> > > > > #include "type.h"
> > > > > +#include <misc.h>
> > > > >
> > > > > #define JR_SIZE 4
> > > > > /* Timeout currently defined as 10 sec */ @@ -35,12 +38,21 @@
> > > > > #define JRSLIODN_SHIFT 0
> > > > > #define JRSLIODN_MASK 0x00000fff
> > > > >
> > > > > -#define JQ_DEQ_ERR -1
> > > > > -#define JQ_DEQ_TO_ERR -2
> > > > > -#define JQ_ENQ_ERR -3
> > > > > +#define JRDID_MS_PRIM_DID BIT(0)
> > > > > +#define JRDID_MS_PRIM_TZ BIT(4)
> > > > > +#define JRDID_MS_TZ_OWN BIT(15)
> > > > > +
> > > > > +#define JQ_DEQ_ERR (-1)
> > > > > +#define JQ_DEQ_TO_ERR (-2)
> > > > > +#define JQ_ENQ_ERR (-3)
> > > > >
> > > > > #define RNG4_MAX_HANDLES 2
> > > > >
> > > > > +enum {
> > > > > + /* Run caam jobring descriptor(in buf) */
> > > > > + CAAM_JR_RUN_DESC,
> > > > > +};
> > > > > +
> > > > > struct op_ring {
> > > > > caam_dma_addr_t desc;
> > > > > uint32_t status;
> > > > > @@ -102,6 +114,19 @@ struct result {
> > > > > uint32_t status;
> > > > > };
> > > > >
> > > > > +/*
> > > > > + * struct caam_regs - CAAM initialization register interface
> > > > > + *
> > > > > + * Interface to caam memory map, jobring register, jobring storage.
> > > > > + */
> > > > > +struct caam_regs {
> > > > > + ccsr_sec_t *sec; /*caam initialization registers*/
> > > > > + struct jr_regs *regs; /*jobring configuration registers*/
> > > > > + u8 jrid; /*id to identify a jobring*/
> > > > > + /*Private sub-storage for a single JobR*/
> > > > > + struct jobring jr[CONFIG_SYS_FSL_MAX_NUM_OF_SEC];
> > > > > +};
> > > > > +
> > > > > void caam_jr_strstatus(u32 status);
> > > > > int run_descriptor_jr(uint32_t *desc);
> > > > >
> > > >
> > > > --
> > > >
> > >
> >
> =================================================================
> > > > ====
> > > > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> > > > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > > > Germany
> > > > Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email:
> > > > sbabic at denx.de
> > > >
> > >
> >
> =================================================================
> > > > ====
More information about the U-Boot
mailing list