[PATCH 50/52] net: Add ethernet support for MIPS Octeon

Stefan Roese sr at denx.de
Wed Mar 30 12:07:26 CEST 2022


This patchs adds the ethernet & MDIO driver for the MIPS Octeon II / III
SoC platform. Please note that these drivers are based on the 2013
U-Boot version from Marvell and make use of the platform supported
helper functions for the ethernet functionality, including stuff like
SFP handling.

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Ramon Fried <rfried.dev at gmail.com>
Cc: Joe Hershberger <joe.hershberger at ni.com>
---
 drivers/net/Kconfig              |    7 +
 drivers/net/Makefile             |    1 +
 drivers/net/octeon/Makefile      |    6 +
 drivers/net/octeon/octeon_eth.c  | 1060 ++++++++++++++++++++++++++++++
 drivers/net/octeon/octeon_mdio.c |  226 +++++++
 5 files changed, 1300 insertions(+)
 create mode 100644 drivers/net/octeon/Makefile
 create mode 100644 drivers/net/octeon/octeon_eth.c
 create mode 100644 drivers/net/octeon/octeon_mdio.c

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 71e0cbafb412..76cf61f4c862 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -485,6 +485,13 @@ config MT7628_ETH
 	  The MediaTek MT7628 ethernet interface is used on MT7628 and
 	  MT7688 based boards.
 
+config NET_OCTEON
+	bool "MIPS Octeon ethernet support"
+	depends on ARCH_OCTEON
+	help
+	  You must select Y to enable network device support for
+	  MIPS Octeon SoCs. If unsure, say n
+
 config NET_OCTEONTX
 	bool "OcteonTX Ethernet support"
 	depends on ARCH_OCTEONTX
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index a6d0c23f02d3..63144b27bf02 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_MVNETA) += mvneta.o
 obj-$(CONFIG_MVPP2) += mvpp2.o
 obj-$(CONFIG_NATSEMI) += natsemi.o
 obj-$(CONFIG_NETCONSOLE) += netconsole.o
+obj-$(CONFIG_NET_OCTEON) += octeon/
 obj-$(CONFIG_NET_OCTEONTX) += octeontx/
 obj-$(CONFIG_NET_OCTEONTX2) += octeontx2/
 obj-$(CONFIG_NS8382X) += ns8382x.o
diff --git a/drivers/net/octeon/Makefile b/drivers/net/octeon/Makefile
new file mode 100644
index 000000000000..c573411a6293
--- /dev/null
+++ b/drivers/net/octeon/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier:    GPL-2.0+
+#
+# Copyright (C) 2018-2022 Marvell International Ltd.
+#
+
+obj-$(CONFIG_NET_OCTEON) += octeon_eth.o octeon_mdio.o
diff --git a/drivers/net/octeon/octeon_eth.c b/drivers/net/octeon/octeon_eth.c
new file mode 100644
index 000000000000..fbb1afc08abc
--- /dev/null
+++ b/drivers/net/octeon/octeon_eth.c
@@ -0,0 +1,1060 @@
+// SPDX-License-Identifier:    GPL-2.0
+/*
+ * Copyright (C) 2018-2022 Marvell International Ltd.
+ */
+
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <env.h>
+#include <net.h>
+#include <netdev.h>
+#include <malloc.h>
+#include <miiphy.h>
+#include <misc.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+
+#include <mach/cvmx-regs.h>
+#include <mach/cvmx-csr.h>
+#include <mach/cvmx-bootmem.h>
+#include <mach/octeon-model.h>
+#include <mach/cvmx-fuse.h>
+#include <mach/octeon-feature.h>
+#include <mach/octeon_fdt.h>
+#include <mach/cvmx-qlm.h>
+#include <mach/octeon_eth.h>
+#include <mach/octeon_qlm.h>
+#include <mach/cvmx-pcie.h>
+#include <mach/cvmx-coremask.h>
+
+#include <mach/cvmx-agl-defs.h>
+#include <mach/cvmx-asxx-defs.h>
+#include <mach/cvmx-bgxx-defs.h>
+#include <mach/cvmx-dbg-defs.h>
+#include <mach/cvmx-gmxx-defs.h>
+#include <mach/cvmx-gserx-defs.h>
+#include <mach/cvmx-ipd-defs.h>
+#include <mach/cvmx-l2c-defs.h>
+#include <mach/cvmx-npi-defs.h>
+#include <mach/cvmx-pcsx-defs.h>
+#include <mach/cvmx-pexp-defs.h>
+#include <mach/cvmx-pki-defs.h>
+#include <mach/cvmx-pko-defs.h>
+#include <mach/cvmx-smix-defs.h>
+#include <mach/cvmx-sriox-defs.h>
+#include <mach/cvmx-xcv-defs.h>
+#include <mach/cvmx-pcsxx-defs.h>
+
+#include <mach/cvmx-helper.h>
+#include <mach/cvmx-helper-board.h>
+#include <mach/cvmx-helper-fdt.h>
+#include <mach/cvmx-helper-bgx.h>
+#include <mach/cvmx-helper-cfg.h>
+
+#include <mach/cvmx-hwpko.h>
+#include <mach/cvmx-pko.h>
+#include <mach/cvmx-pki.h>
+#include <mach/cvmx-config.h>
+#include <mach/cvmx-mdio.h>
+
+/** Maximum receive packet size (hardware default is 1536) */
+#define CONFIG_OCTEON_NETWORK_MRU 1536
+
+#define OCTEON_BOOTLOADER_NAMED_BLOCK_TMP_PREFIX "__tmp"
+
+/**
+ * Enables RX packet debugging if octeon_debug_rx_packets is set in the
+ * environment.
+ */
+#define DEBUG_RX_PACKET
+
+/**
+ * Enables TX packet debugging if octeon_debug_tx_packets is set in the
+ * environment.
+ */
+#define DEBUG_TX_PACKET
+
+/* Global flag indicating common hw has been set up */
+static int octeon_global_hw_inited;
+
+#if defined(DEBUG_RX_PACKET) || defined(DEBUG_TX_PACKET)
+static int packet_rx_debug;
+static int packet_tx_debug;
+#endif
+
+/* Make sure that we have enough buffers to keep prefetching blocks happy.
+ * Absolute minimum is probably about 200.
+ */
+#define NUM_PACKET_BUFFERS 1000
+
+#define PKO_SHUTDOWN_TIMEOUT_VAL 100
+
+/* Define the offsets from the base CSR */
+#define GMX_PRT_CFG 0x10
+
+#define GMX_RX_FRM_MAX 0x30
+#define GMX_RX_JABBER  0x38
+
+#define GMX_RX_ADR_CTL	  0x100
+#define GMX_RX_ADR_CAM_EN 0x108
+#define GMX_RX_ADR_CAM0	  0x180
+#define GMX_RX_ADR_CAM1	  0x188
+#define GMX_RX_ADR_CAM2	  0x190
+#define GMX_RX_ADR_CAM3	  0x198
+#define GMX_RX_ADR_CAM4	  0x1a0
+#define GMX_RX_ADR_CAM5	  0x1a8
+#define GMX_TX_OVR_BP	  0x4c8
+
+/**
+ * Set the hardware MAC address for a device
+ *
+ * @param interface    interface of port to set
+ * @param index    index of port to set MAC address for
+ * @param addr   Address structure to change it too.
+ * @return Zero on success
+ */
+static int cvm_oct_set_mac_address(struct udevice *dev)
+{
+	struct octeon_eth_info *priv = dev_get_priv(dev);
+	struct eth_pdata *pdata = dev_get_plat(dev);
+	cvmx_gmxx_prtx_cfg_t gmx_cfg;
+	cvmx_helper_interface_mode_t mode;
+	cvmx_gmxx_rxx_adr_ctl_t control;
+	u8 *ptr = (uint8_t *)pdata->enetaddr;
+	int interface = priv->interface;
+	int index = priv->index;
+	u64 mac = 0;
+	u64 gmx_reg;
+	int xipd_port;
+	int i;
+
+	for (i = 0; i < 6; i++)
+		mac = (mac << 8) | (u64)(ptr[i]);
+
+	debug("%s(%s (%pM))\n", __func__, dev->name, ptr);
+	mode = cvmx_helper_interface_get_mode(interface);
+
+	/* It's rather expensive to change the MAC address for BGX so we only
+	 * do this if it has changed or not been set previously.
+	 */
+	if (octeon_has_feature(OCTEON_FEATURE_BGX)) {
+		xipd_port = cvmx_helper_get_ipd_port(interface, index);
+		if (priv->last_bgx_mac != mac || !priv->bgx_mac_set) {
+			cvmx_helper_bgx_set_mac(xipd_port, 1, 2, mac);
+			priv->last_bgx_mac = mac;
+			priv->bgx_mac_set = 1;
+		}
+		return 0;
+	}
+
+	if (mode == CVMX_HELPER_INTERFACE_MODE_AGL) {
+		gmx_reg = CVMX_AGL_GMX_RXX_INT_REG(0);
+	} else {
+		gmx_reg = CVMX_GMXX_RXX_INT_REG(index, interface);
+		csr_wr(CVMX_GMXX_SMACX(index, interface), mac);
+	}
+
+	/* Disable interface */
+	gmx_cfg.u64 = csr_rd(gmx_reg + GMX_PRT_CFG);
+	csr_wr(gmx_reg + GMX_PRT_CFG, gmx_cfg.u64 & ~1ull);
+	debug("%s: gmx reg: 0x%llx\n", __func__, gmx_reg);
+
+	csr_wr(gmx_reg + GMX_RX_ADR_CAM0, ptr[0]);
+	csr_wr(gmx_reg + GMX_RX_ADR_CAM1, ptr[1]);
+	csr_wr(gmx_reg + GMX_RX_ADR_CAM2, ptr[2]);
+	csr_wr(gmx_reg + GMX_RX_ADR_CAM3, ptr[3]);
+	csr_wr(gmx_reg + GMX_RX_ADR_CAM4, ptr[4]);
+	csr_wr(gmx_reg + GMX_RX_ADR_CAM5, ptr[5]);
+
+	control.u64 = 0;
+	control.s.bcst = 1;	/* Allow broadcast MAC addresses */
+	control.s.mcst = 1;	/* Force reject multicast packets */
+	control.s.cam_mode = 1; /* Filter packets based on the CAM */
+
+	csr_wr(gmx_reg + GMX_RX_ADR_CTL, control.u64);
+
+	csr_wr(gmx_reg + GMX_RX_ADR_CAM_EN, 1);
+
+	/* Return interface to previous enable state */
+	csr_wr(gmx_reg + GMX_PRT_CFG, gmx_cfg.u64);
+
+	return 0;
+}
+
+static void cvm_oct_fill_hw_memory(u64 pool, u64 size, u64 elements)
+{
+	static int alloc_count;
+	char tmp_name[64];
+	int ret;
+
+	debug("%s: pool: 0x%llx, size: 0xx%llx, count: 0x%llx\n",
+	      __func__, pool, size, elements);
+	sprintf(tmp_name, "%s_fpa_alloc_%d",
+		OCTEON_BOOTLOADER_NAMED_BLOCK_TMP_PREFIX, alloc_count++);
+	ret = cvmx_fpa_setup_pool(pool, tmp_name, NULL, size, elements);
+}
+
+/**
+ * Configure common hardware for all interfaces
+ */
+static void cvm_oct_configure_common_hw(void)
+{
+	int mru = env_get_ulong("octeon_mru", 0, CONFIG_OCTEON_NETWORK_MRU);
+	int packet_pool_size = CVMX_FPA_PACKET_POOL_SIZE;
+
+	if (mru > packet_pool_size)
+		packet_pool_size = (mru + CVMX_CACHE_LINE_SIZE - 1) &
+				   ~(CVMX_CACHE_LINE_SIZE - 1);
+
+	/* Setup the FPA */
+	cvmx_fpa_enable();
+
+	cvm_oct_fill_hw_memory(CVMX_FPA_WQE_POOL, CVMX_FPA_WQE_POOL_SIZE,
+			       NUM_PACKET_BUFFERS);
+#if CVMX_FPA_OUTPUT_BUFFER_POOL != CVMX_FPA_PACKET_POOL
+	if (!octeon_has_feature(OCTEON_FEATURE_CN78XX_WQE)) {
+		cvm_oct_fill_hw_memory(CVMX_FPA_OUTPUT_BUFFER_POOL,
+				       CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE, 128);
+	}
+#endif
+	cvm_oct_fill_hw_memory(CVMX_FPA_PACKET_POOL, packet_pool_size,
+			       NUM_PACKET_BUFFERS);
+
+	cvmx_helper_initialize_packet_io_global();
+	cvmx_helper_initialize_packet_io_local();
+
+	/* The MRU defaults to 1536 bytes by the hardware.  Setting
+	 * CONFIG_OCTEON_NETWORK_MRU allows this to be overridden.
+	 */
+	if (octeon_has_feature(OCTEON_FEATURE_PKI)) {
+		struct cvmx_pki_global_config gbl_cfg;
+		int i;
+
+		cvmx_pki_read_global_config(0, &gbl_cfg);
+		for (i = 0; i < CVMX_PKI_NUM_FRAME_CHECK; i++)
+			gbl_cfg.frm_len[i].maxlen = mru;
+		cvmx_pki_write_global_config(0, &gbl_cfg);
+	}
+
+	/* Set POW get work timeout to maximum value */
+	if (octeon_has_feature(OCTEON_FEATURE_CN68XX_WQE) ||
+	    octeon_has_feature(OCTEON_FEATURE_CN78XX_WQE))
+		csr_wr(CVMX_SSO_NW_TIM, 0x3ff);
+	else
+		csr_wr(CVMX_POW_NW_TIM, 0x3ff);
+}
+
+/**
+ * Enables Ethernet devices to allow packets to be transmitted and received.
+ * For example, this is activated when the DHCP command is issued.
+ *
+ * @param	dev	Ethernet device to initialize
+ * @param	bis	board data structure, not used.
+ *
+ * @return	1 for success
+ */
+int octeon_eth_init(struct udevice *dev)
+{
+	struct octeon_eth_info *priv = dev_get_priv(dev);
+
+	debug("%s(), dev_ptr: %p, dev: %s, port: %d\n", __func__, dev,
+	      dev->name, priv->port);
+
+	if (priv->initted_flag) {
+		debug("%s already initialized\n", dev->name);
+		return 1;
+	}
+
+	if (!octeon_global_hw_inited) {
+		debug("Initializing common hardware\n");
+		cvm_oct_configure_common_hw();
+	}
+
+	/* Ignore backpressure on RGMII ports */
+	if (!octeon_has_feature(OCTEON_FEATURE_BGX))
+		csr_wr(priv->gmx_base + GMX_TX_OVR_BP, 0xf << 8 | 0xf);
+
+	debug("%s: Setting MAC address\n", __func__);
+	cvm_oct_set_mac_address(dev);
+
+	if (!octeon_global_hw_inited) {
+		debug("Enabling packet input\n");
+		cvmx_helper_ipd_and_packet_input_enable();
+		octeon_global_hw_inited = 1;
+
+		/* Connect, configure and start the PHY, if the device is
+		 * connected to one. If not, then it's most likely an SPF
+		 * enabled port, which does not have such PHY setup here.
+		 */
+		if (priv->mdio_dev) {
+			priv->phy_dev = dm_eth_phy_connect(dev);
+			phy_config(priv->phy_dev);
+			phy_startup(priv->phy_dev);
+		}
+	}
+	priv->enabled = 0;
+	priv->initted_flag = 1;
+
+	debug("%s exiting successfully\n", __func__);
+	return 1;
+}
+
+/**
+ * Initializes the specified interface and port
+ *
+ * @param	interface	interface to initialize
+ * @param	index		port index on interface
+ * @param	port		ipd port number
+ * @param	if_mode		interface mode
+ *
+ * @return	0 for success, -1 if out of memory, 1 if port is invalid
+ */
+static int octeon_eth_initialize(struct udevice *dev, int interface,
+				 int index, int port,
+				 cvmx_helper_interface_mode_t if_mode)
+{
+	struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
+	int eth;
+
+	eth = cvmx_helper_get_port_fdt_node_offset(interface, index);
+	if (eth <= 0) {
+		debug("ERROR: No fdt node for interface %d, index %d\n",
+		      interface, index);
+		return 1;
+	}
+
+	oct_eth_info->is_c45 = (if_mode == CVMX_HELPER_INTERFACE_MODE_XAUI) ||
+			       (if_mode == CVMX_HELPER_INTERFACE_MODE_RXAUI) ||
+			       (if_mode == CVMX_HELPER_INTERFACE_MODE_XFI) ||
+			       (if_mode == CVMX_HELPER_INTERFACE_MODE_XLAUI) ||
+			       (if_mode == CVMX_HELPER_INTERFACE_MODE_10G_KR) ||
+			       (if_mode == CVMX_HELPER_INTERFACE_MODE_10G_KR);
+	oct_eth_info->port = port;
+	oct_eth_info->index = index;
+	oct_eth_info->interface = interface;
+	oct_eth_info->initted_flag = 0;
+	/* This is guaranteed to force the link state to be printed out */
+	oct_eth_info->link_state = 0xffffffffffffffffULL;
+	debug("Setting up port: %d, int: %d, index: %d, device: octeth%d\n",
+	      oct_eth_info->port, oct_eth_info->interface, oct_eth_info->index,
+	      dev_seq(dev));
+	if (if_mode == CVMX_HELPER_INTERFACE_MODE_AGL) {
+		oct_eth_info->gmx_base = CVMX_AGL_GMX_RXX_INT_REG(0);
+	} else {
+		if (!octeon_has_feature(OCTEON_FEATURE_BGX))
+			oct_eth_info->gmx_base =
+				CVMX_GMXX_RXX_INT_REG(index, interface);
+	}
+
+	return 0;
+}
+
+/**
+ * @INTERNAL
+ * Converts a BGX address to the node, interface and port number
+ *
+ * @param bgx_addr	Address of CSR register
+ *
+ * @return node, interface and port number, will be -1 for invalid address.
+ */
+static struct cvmx_xiface __cvmx_bgx_reg_addr_to_xiface(u64 bgx_addr)
+{
+	struct cvmx_xiface xi = { -1, -1 };
+
+	xi.node = cvmx_csr_addr_to_node(bgx_addr);
+	bgx_addr = cvmx_csr_addr_strip_node(bgx_addr);
+	if ((bgx_addr & 0xFFFFFFFFF0000000) != 0x00011800E0000000) {
+		debug("%s: Invalid BGX address 0x%llx\n", __func__,
+		      (unsigned long long)bgx_addr);
+		xi.node = -1;
+		return xi;
+	}
+	xi.interface = (bgx_addr >> 24) & 0x0F;
+
+	return xi;
+}
+
+static int octeon_nic_probe(struct udevice *dev)
+{
+	struct octeon_eth_info *info = dev_get_priv(dev);
+	struct ofnode_phandle_args phandle;
+	struct cvmx_xiface xi;
+	ofnode node, mdio_node;
+	int ipd_port;
+	int intf;
+	int ret;
+
+	/* The empty stub is to keep cvmx_user_app_init() happy. */
+	cvmx_npi_max_pknds = 1;
+	__cvmx_helper_init_port_valid();
+
+	xi = __cvmx_bgx_reg_addr_to_xiface(dev_read_addr(dev));
+	intf = xi.interface;
+	debug("%s: Found BGX node %d, interface %d\n", __func__, xi.node, intf);
+
+	ipd_port = cvmx_helper_get_ipd_port(intf, xi.node);
+	ret = octeon_eth_initialize(dev, intf, xi.node, ipd_port,
+				    cvmx_helper_interface_get_mode(intf));
+
+	/* Move to subnode, as this includes the "phy-handle" */
+	node = dev_read_first_subnode(dev);
+
+	/* Check if an SPF module is conneted, then no MDIO is probed */
+	ret = ofnode_parse_phandle_with_args(node, "sfp-slot", NULL, 0, 0,
+					     &phandle);
+	if (!ret) {
+		dev_dbg(dev, "sfp-slot found, not probing for MDIO\n");
+		return 0;
+	}
+
+	/* Continue with MDIO probing */
+	ret = ofnode_parse_phandle_with_args(node, "phy-handle", NULL, 0, 0,
+					     &phandle);
+	if (ret) {
+		dev_err(dev, "phy-handle not found in subnode\n");
+		return -ENODEV;
+	}
+
+	/* Get MDIO node */
+	mdio_node = ofnode_get_parent(phandle.node);
+	ret = uclass_get_device_by_ofnode(UCLASS_MDIO, mdio_node,
+					  &info->mdio_dev);
+	if (ret) {
+		dev_err(dev, "mdio_dev not found\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/**
+ * Sets the hardware MAC address of the Ethernet device
+ *
+ * @param dev - Ethernet device
+ *
+ * @return 0 for success
+ */
+int octeon_eth_write_hwaddr(struct udevice *dev)
+{
+	struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
+	struct eth_pdata *pdata = dev_get_plat(dev);
+
+	/* Skip if the interface isn't yet enabled */
+	if (!oct_eth_info->enabled) {
+		debug("%s: Interface not enabled, not setting MAC address\n",
+		      __func__);
+		return 0;
+	}
+	debug("%s: Setting %s address to %02x:%02x:%02x:%02x:%02x:%02x\n",
+	      __func__, dev->name, pdata->enetaddr[0], pdata->enetaddr[1],
+	      pdata->enetaddr[2], pdata->enetaddr[3], pdata->enetaddr[4],
+	      pdata->enetaddr[5]);
+	return cvm_oct_set_mac_address(dev);
+}
+
+/**
+ * Enables and disables the XCV RGMII interface
+ *
+ * @param	interface	Interface number
+ * @param	index		Port index (should be 0 for RGMII)
+ * @param	enable		True to enable it, false to disable it
+ */
+static void octeon_bgx_xcv_rgmii_enable(int interface, int index, bool enable)
+{
+	union cvmx_xcv_reset xcv_reset;
+
+	debug("%s(%d, %d, %sable)\n", __func__, interface, index,
+	      enable ? "en" : "dis");
+	xcv_reset.u64 = csr_rd(CVMX_XCV_RESET);
+	xcv_reset.s.rx_pkt_rst_n = enable ? 1 : 0;
+	csr_wr(CVMX_XCV_RESET, xcv_reset.u64);
+}
+
+/**
+ * Enables a SGMII interface
+ *
+ * @param dev - Ethernet device to initialize
+ */
+void octeon_eth_sgmii_enable(struct udevice *dev)
+{
+	struct octeon_eth_info *oct_eth_info;
+	cvmx_gmxx_prtx_cfg_t gmx_cfg;
+	int index, interface;
+	cvmx_helper_interface_mode_t if_mode;
+
+	oct_eth_info = dev_get_priv(dev);
+	interface = oct_eth_info->interface;
+	index = oct_eth_info->index;
+
+	debug("%s(%s) (%d.%d)\n", __func__, dev->name, interface, index);
+	if (octeon_has_feature(OCTEON_FEATURE_BGX)) {
+		cvmx_bgxx_cmrx_config_t cmr_config;
+
+		cmr_config.u64 =
+			csr_rd(CVMX_BGXX_CMRX_CONFIG(index, interface));
+		cmr_config.s.enable = 1;
+		cmr_config.s.data_pkt_tx_en = 1;
+		cmr_config.s.data_pkt_rx_en = 1;
+		csr_wr(CVMX_BGXX_CMRX_CONFIG(index, interface), cmr_config.u64);
+		mdelay(100);
+		if (cvmx_helper_bgx_is_rgmii(interface, index))
+			octeon_bgx_xcv_rgmii_enable(interface, index, true);
+	} else {
+		if_mode = cvmx_helper_interface_get_mode(interface);
+		/* Normal operating mode. */
+
+		if (if_mode == CVMX_HELPER_INTERFACE_MODE_SGMII ||
+		    if_mode == CVMX_HELPER_INTERFACE_MODE_QSGMII) {
+			cvmx_pcsx_miscx_ctl_reg_t pcsx_miscx_ctl_reg;
+
+			debug("  if mode: (Q)SGMII\n");
+			pcsx_miscx_ctl_reg.u64 = csr_rd(CVMX_PCSX_MISCX_CTL_REG(index, interface));
+			pcsx_miscx_ctl_reg.s.gmxeno = 0;
+			csr_wr(CVMX_PCSX_MISCX_CTL_REG(index, interface),
+			       pcsx_miscx_ctl_reg.u64);
+		} else if (if_mode != CVMX_HELPER_INTERFACE_MODE_AGL) {
+			cvmx_pcsxx_misc_ctl_reg_t pcsxx_misc_ctl_reg;
+
+			debug("  if mode: AGM\n");
+			pcsxx_misc_ctl_reg.u64 =
+				csr_rd(CVMX_PCSXX_MISC_CTL_REG(interface));
+			pcsxx_misc_ctl_reg.s.gmxeno = 0;
+			csr_wr(CVMX_PCSXX_MISC_CTL_REG(interface),
+			       pcsxx_misc_ctl_reg.u64);
+		}
+
+		gmx_cfg.u64 = csr_rd(oct_eth_info->gmx_base + GMX_PRT_CFG);
+		gmx_cfg.s.en = 1;
+		csr_wr(oct_eth_info->gmx_base + GMX_PRT_CFG, gmx_cfg.u64);
+		gmx_cfg.u64 = csr_rd(oct_eth_info->gmx_base + GMX_PRT_CFG);
+	}
+}
+
+/**
+ * Enables an Ethernet interface
+ *
+ * @param dev - Ethernet device to enable
+ */
+void octeon_eth_enable(struct udevice *dev)
+{
+	struct octeon_eth_info *oct_eth_info;
+	u64 tmp;
+	int interface;
+	cvmx_helper_interface_mode_t if_mode;
+
+	oct_eth_info = dev_get_priv(dev);
+	interface = oct_eth_info->interface;
+	if_mode = cvmx_helper_interface_get_mode(interface);
+
+	switch (if_mode) {
+	case CVMX_HELPER_INTERFACE_MODE_RGMII:
+	case CVMX_HELPER_INTERFACE_MODE_GMII:
+		debug("  rgmii/gmii mode\n");
+		tmp = csr_rd(CVMX_ASXX_RX_PRT_EN(interface));
+		tmp |= (1ull << (oct_eth_info->port & 0x3));
+		csr_wr(CVMX_ASXX_RX_PRT_EN(interface), tmp);
+		tmp = csr_rd(CVMX_ASXX_TX_PRT_EN(interface));
+		tmp |= (1ull << (oct_eth_info->port & 0x3));
+		csr_wr(CVMX_ASXX_TX_PRT_EN(interface), tmp);
+		octeon_eth_write_hwaddr(dev);
+		break;
+
+	case CVMX_HELPER_INTERFACE_MODE_SGMII:
+	case CVMX_HELPER_INTERFACE_MODE_XAUI:
+	case CVMX_HELPER_INTERFACE_MODE_RXAUI:
+	case CVMX_HELPER_INTERFACE_MODE_XLAUI:
+	case CVMX_HELPER_INTERFACE_MODE_XFI:
+	case CVMX_HELPER_INTERFACE_MODE_10G_KR:
+	case CVMX_HELPER_INTERFACE_MODE_40G_KR4:
+	case CVMX_HELPER_INTERFACE_MODE_MIXED:
+	case CVMX_HELPER_INTERFACE_MODE_AGL:
+		debug("  SGMII/XAUI/etc.\n");
+		octeon_eth_sgmii_enable(dev);
+		octeon_eth_write_hwaddr(dev);
+		break;
+
+	default:
+		break;
+	}
+}
+
+void octeon_phy_port_check(struct udevice *dev)
+{
+	struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
+	struct phy_device *phydev = oct_eth_info->phydev;
+
+	if (oct_eth_info->phy_port_check)
+		oct_eth_info->phy_port_check(phydev);
+}
+
+/**
+ * Configure the RGMII port for the negotiated speed
+ *
+ * @param dev    Linux device for the RGMII port
+ */
+static void cvm_oct_configure_rgmii_speed(struct udevice *dev)
+{
+	struct octeon_eth_info *priv = dev_get_priv(dev);
+	int port = priv->port;
+	cvmx_helper_link_info_t link_state = cvmx_helper_link_get(port);
+
+	/* If the port is down some PHYs we need to check modules, etc. */
+	if (!link_state.s.link_up)
+		octeon_phy_port_check(dev);
+
+	if (link_state.u64 != priv->link_state) {
+		cvmx_helper_interface_mode_t mode;
+
+		octeon_phy_port_check(dev);
+
+		debug("%s(%s): Link state changed\n", __func__, dev->name);
+		printf("%s: ", dev->name);
+		if (!link_state.s.link_up) {
+			puts("Down ");
+		} else {
+			printf("Up %d Mbps ", link_state.s.speed);
+			if (link_state.s.full_duplex)
+				puts("Full duplex ");
+			else
+				puts("Half duplex ");
+		}
+		mode = cvmx_helper_interface_get_mode(priv->interface);
+		printf("(port %2d) (%s)\n", port,
+		       cvmx_helper_interface_mode_to_string(mode));
+		debug("%s: Setting link state\n", __func__);
+		cvmx_helper_link_set(priv->port, link_state);
+		priv->link_state = link_state.u64;
+	}
+}
+
+#if defined(DEBUG_TX_PACKET) || defined(DEBUG_RX_PACKET)
+static void print_mac(const char *label, const uint8_t *mac_addr)
+{
+	printf("%s: %02x:%02x:%02x:%02x:%02x:%02x", label, mac_addr[0],
+	       mac_addr[1], mac_addr[2], mac_addr[3], mac_addr[4], mac_addr[5]);
+}
+
+static void print_ip(const void *packet)
+{
+	u8 *p = (uint8_t *)packet;
+	u16 length;
+	u8 hdr_len;
+
+	puts("IP Header:\n");
+	if ((p[0] & 0xF0) != 0x40) {
+		printf("Invalid IP version %d\n", *p >> 4);
+		return;
+	}
+	hdr_len = *p & 0x0F;
+	if (hdr_len < 5)
+		printf("Invalid IP header length %d\n", hdr_len);
+	printf("  Version: 4, Header length: %d\n", hdr_len);
+	length = (p[2] << 8) | p[3];
+	printf("  TOS: 0x%02x, length: %d\n", p[1], length);
+	printf("  ID: %d, %s%s%s fragment offset: %d\n", (p[4] << 8) | p[5],
+	       p[6] & 0x80 ? "congested, " : "", p[6] & 0x40 ? "DF, " : "",
+	       p[6] & 0x20 ? "MF, " : "", ((p[6] & 0x1F) << 8) | p[7]);
+	printf("  TTL: %d, Protocol: %d, Header Checksum: 0x%x\n", p[8], p[9],
+	       (p[10] << 8) | p[11]);
+	printf("  Source IP: %d.%d.%d.%d\n  Destination IP: %d.%d.%d.%d\n",
+	       p[12], p[13], p[14], p[15], p[16], p[17], p[18], p[19]);
+	if (p[9] == 17 || p[9] == 6)
+		printf("  Source port: %u, Destination port: %u\n",
+		       (p[20] << 8) | p[21], (p[22] << 8) | p[23]);
+	puts("\n");
+}
+
+/**
+ * Prints out a packet for debugging purposes
+ *
+ * @param[in]	packet - pointer to packet data
+ * @param	length - length of packet in bytes
+ */
+static void print_packet(const void *packet, int length)
+{
+	int i, j;
+	const unsigned char *up = packet;
+	u16 type = (up[12] << 8 | up[13]);
+	int start = 14;
+
+	print_mac("DMAC", &up[0]);
+	puts("    ");
+	print_mac("SMAC", &up[6]);
+	printf("    TYPE: %04x\n", type);
+
+	if (type == 0x0800)
+		print_ip(&up[start]);
+
+	for (i = start; (i + 16) < length; i += 16) {
+		printf("%04x ", i);
+		for (j = 0; j < 16; ++j)
+			printf("%02x ", up[i + j]);
+
+		printf("    ");
+		for (j = 0; j < 16; ++j)
+			printf("%c",
+			       ((up[i + j] >= ' ') && (up[i + j] <= '~')) ?
+				       up[i + j] :
+					     '.');
+		printf("\n");
+	}
+	printf("%04x ", i);
+	for (j = 0; i + j < length; ++j)
+		printf("%02x ", up[i + j]);
+
+	for (; j < 16; ++j)
+		printf("   ");
+
+	printf("    ");
+	for (j = 0; i + j < length; ++j)
+		printf("%c", ((up[i + j] >= ' ') && (up[i + j] <= '~')) ?
+				     up[i + j] :
+					   '.');
+
+	printf("\n");
+}
+#endif
+
+/**
+ * String representation of error codes.
+ */
+static const char * const rx_error_codes[] = {
+	"OK",
+	"partial",
+	"jabber",
+	"overrun",
+	"oversize",
+	"alignment",
+	"fragment",
+	"fcs",
+	"undersize",
+	"extend",
+	"length mismatch",
+	"rgmii rx",
+	"skip error",
+	"nibble error (studder)",
+	"(undefined)",
+	"(undefined)",
+	"SPI 4.2 FCS",
+	"skip",
+	"L2 malformed",
+};
+
+/**
+ * Called to receive a packet
+ *
+ * @param dev - device to receive on
+ *
+ * @return - length of packet
+ *
+ * This function is used to poll packets.  In turn it calls NetReceive
+ * to process the packets.
+ */
+static int nic_recv(struct udevice *dev, int flags, uchar **packetp)
+{
+	cvmx_wqe_t *work = cvmx_pow_work_request_sync(CVMX_POW_WAIT);
+	struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
+	cvmx_buf_ptr_t buf_ptr;
+	void *packet_data;
+	int length;
+	int error_code;
+
+	if (!oct_eth_info->enabled) {
+		oct_eth_info->enabled = 1;
+		debug("%s: Enabling interface %s\n", __func__, dev->name);
+		octeon_eth_enable(dev);
+	}
+
+	if (!work) {
+		/*
+		 * Somtimes the link is not up yet. Return here in this
+		 * case, this function will be called again later.
+		 */
+		return 0;
+	}
+
+	error_code = cvmx_wqe_get_rcv_err(work);
+	if (error_code) {
+		/* Work has error, so drop */
+		cvmx_helper_free_packet_data(work);
+		cvmx_wqe_free(work);
+		if (error_code < ARRAY_SIZE(rx_error_codes) &&
+		    !octeon_has_feature(OCTEON_FEATURE_BGX))
+			printf("Receive error (code %d: %s), dropping\n",
+			       error_code, rx_error_codes[error_code]);
+		else
+			printf("Receive error (code %d (unknown), dropping\n",
+			       error_code);
+		return 0;
+	}
+	if (cvmx_wqe_get_bufs(work) != 1) {
+		/* can only support single-buffer packets */
+		printf("Abnormal packet received in %u bufs, dropping\n",
+		       cvmx_wqe_get_bufs(work));
+		length = cvmx_wqe_get_len(work);
+		buf_ptr = cvmx_wqe_get_packet_ptr(work);
+		packet_data = cvmx_phys_to_ptr(buf_ptr.s.addr);
+		print_packet(packet_data, length);
+		cvmx_helper_free_packet_data(work);
+		cvmx_wqe_free(work);
+		return 0;
+	}
+
+	buf_ptr = cvmx_wqe_get_packet_ptr(work);
+	packet_data = cvmx_phys_to_ptr(buf_ptr.s.addr);
+	length = cvmx_wqe_get_len(work);
+
+	oct_eth_info->packets_received++;
+	debug("############# got work: %p, len: %d, packet_ptr: %p\n", work,
+	      length, packet_data);
+#if defined(DEBUG_RX_PACKET)
+	if (packet_rx_debug) {
+		printf("\nRX packet: interface: %d, index: %d\n",
+		       oct_eth_info->interface, oct_eth_info->index);
+		print_packet(packet_data, length);
+	}
+#endif
+	*packetp = (uchar *)packet_data;
+
+	/* Save work for free_pkt() */
+	oct_eth_info->work = work;
+
+	/* Free WQE and packet data */
+	return length;
+}
+
+static int nic_free_pkt(struct udevice *dev, uchar *pkt, int pkt_len)
+{
+	struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
+	cvmx_wqe_t *work = oct_eth_info->work;
+
+	if (!work)
+		return 0;
+
+	cvmx_helper_free_packet_data(work);
+	cvmx_wqe_free(work);
+	oct_eth_info->work = NULL;
+
+	return 0;
+}
+
+/**
+ * Packet transmit
+ *
+ * @param skb    Packet to send
+ * @param dev    Device info structure
+ * @return Always returns zero
+ */
+static int cvm_oct_xmit(struct udevice *dev, void *packet, int len)
+{
+	struct octeon_eth_info *priv = dev_get_priv(dev);
+	int queue = cvmx_pko_get_base_queue(priv->port);
+	cvmx_pko_command_word0_t pko_command;
+	cvmx_buf_ptr_t hw_buffer;
+	int rv;
+
+	debug("%s: addr: %p, len: %d\n", __func__, packet, len);
+
+	hw_buffer.u64 = 0;
+	hw_buffer.s.addr = cvmx_ptr_to_phys(packet);
+	hw_buffer.s.pool = CVMX_FPA_PACKET_POOL;
+	hw_buffer.s.size = len;
+	hw_buffer.s.back = 0;
+
+	/* Build the PKO command */
+	pko_command.u64 = 0;
+	pko_command.s.subone0 = 1;
+	pko_command.s.dontfree = 0;
+	pko_command.s.segs = 1;
+	pko_command.s.total_bytes = len;
+	/* Send the packet to the output queue */
+
+	debug("%s: port: %d, queue: %d\n", __func__, priv->port, queue);
+	cvmx_pko_send_packet_prepare(priv->port, queue, 0);
+	rv = cvmx_pko_send_packet_finish(priv->port, queue, pko_command,
+					 hw_buffer, 0);
+	if (rv)
+		printf("Failed to send the packet rv=%d\n", rv);
+
+	return 0;
+}
+
+static int nic_xmit(struct udevice *dev, void *pkt, int pkt_len)
+{
+	struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
+	void *fpa_buf = cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL);
+
+	if (!oct_eth_info->enabled) {
+		oct_eth_info->enabled = 1;
+		octeon_eth_enable(dev);
+	}
+
+	/* We need to copy this to a FPA buffer, then give that to TX */
+
+	if (oct_eth_info->packets_sent == 0 &&
+	    !octeon_has_feature(OCTEON_FEATURE_BGX))
+		cvm_oct_configure_rgmii_speed(dev);
+
+	if (!fpa_buf) {
+		printf("ERROR allocating buffer for packet!\n");
+		return -1;
+	}
+
+	memcpy(fpa_buf, pkt, pkt_len);
+#ifdef DEBUG_TX_PACKET
+	if (packet_tx_debug) {
+		printf("\nTX packet: interface: %d, index: %d\n",
+		       oct_eth_info->interface, oct_eth_info->index);
+		print_packet(pkt, pkt_len);
+	}
+#endif
+	cvm_oct_xmit(dev, fpa_buf, pkt_len);
+	oct_eth_info->packets_sent++;
+
+	return 0;
+}
+
+int nic_open(struct udevice *dev)
+{
+	octeon_eth_init(dev);
+
+	return 0;
+}
+
+static void octeon_eth_halt_bgx(struct udevice *dev,
+				cvmx_helper_interface_mode_t mode)
+{
+	union cvmx_bgxx_cmrx_config cmr_config;
+	union cvmx_bgxx_cmr_rx_adrx_cam cmr_cam;
+	struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
+	int index = oct_eth_info->index;
+	int xiface = oct_eth_info->interface;
+	struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+
+	debug("%s(%s(%d.%d), %d)\n", __func__, dev->name, xiface, index, mode);
+
+	/* For RGMII we need to properly shut down the XCV interface */
+	if (cvmx_helper_bgx_is_rgmii(xiface, index)) {
+		debug("  Shut down XCV RGMII\n");
+		octeon_bgx_xcv_rgmii_enable(xi.interface, index, false);
+	} else {
+		cmr_config.u64 = csr_rd_node(xi.node,
+					     CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
+		cmr_config.s.data_pkt_tx_en = 0;
+		cmr_config.s.data_pkt_rx_en = 0;
+		csr_wr_node(xi.node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface),
+			    cmr_config.u64);
+
+		cmr_cam.u64 = csr_rd_node(xi.node,
+					  CVMX_BGXX_CMR_RX_ADRX_CAM(index * 8, xi.interface));
+		cmr_cam.s.en = 0;
+		csr_wr_node(xi.node,
+			    CVMX_BGXX_CMR_RX_ADRX_CAM(index * 8, xi.interface),
+			    cmr_cam.u64);
+		oct_eth_info->last_bgx_mac = 0;
+		oct_eth_info->bgx_mac_set = 0;
+	}
+}
+
+/**
+ * Halts the specified Ethernet interface preventing it from receiving any more
+ * packets.
+ *
+ * @param dev - Ethernet device to shut down.
+ */
+void octeon_eth_halt(struct udevice *dev)
+{
+	struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
+	int index = oct_eth_info->index;
+	int interface = oct_eth_info->interface;
+	cvmx_helper_interface_mode_t mode;
+	union cvmx_gmxx_rxx_adr_ctl adr_ctl;
+	cvmx_gmxx_prtx_cfg_t gmx_cfg;
+	u64 tmp;
+
+	debug("%s(%s): Halting\n", __func__, dev->name);
+
+	oct_eth_info->enabled = 0;
+
+	mode = cvmx_helper_interface_get_mode(oct_eth_info->interface);
+	if (octeon_has_feature(OCTEON_FEATURE_BGX)) {
+		octeon_eth_halt_bgx(dev, mode);
+		return;
+	}
+
+	/* Stop SCC */
+	/* Disable reception on this port at the GMX block */
+	switch (mode) {
+	case CVMX_HELPER_INTERFACE_MODE_RGMII:
+	case CVMX_HELPER_INTERFACE_MODE_GMII:
+		debug("  RGMII/GMII\n");
+		tmp = csr_rd(CVMX_ASXX_RX_PRT_EN(oct_eth_info->interface));
+		tmp &= ~(1ull << index);
+		/* Disable the RGMII RX ports */
+		csr_wr(CVMX_ASXX_RX_PRT_EN(oct_eth_info->interface), tmp);
+		tmp = csr_rd(CVMX_ASXX_TX_PRT_EN(oct_eth_info->interface));
+		tmp &= ~(1ull << index);
+		/* Disable the RGMII TX ports */
+		csr_wr(CVMX_ASXX_TX_PRT_EN(oct_eth_info->interface), tmp);
+		/* No break! */
+	case CVMX_HELPER_INTERFACE_MODE_SGMII:
+	case CVMX_HELPER_INTERFACE_MODE_QSGMII:
+	case CVMX_HELPER_INTERFACE_MODE_XAUI:
+	case CVMX_HELPER_INTERFACE_MODE_RXAUI:
+	case CVMX_HELPER_INTERFACE_MODE_XLAUI:
+	case CVMX_HELPER_INTERFACE_MODE_XFI:
+	case CVMX_HELPER_INTERFACE_MODE_10G_KR:
+	case CVMX_HELPER_INTERFACE_MODE_40G_KR4:
+	case CVMX_HELPER_INTERFACE_MODE_MIXED:
+	case CVMX_HELPER_INTERFACE_MODE_AGL:
+		/* Disable MAC filtering */
+		gmx_cfg.u64 = csr_rd(oct_eth_info->gmx_base + GMX_PRT_CFG);
+		csr_wr(oct_eth_info->gmx_base + GMX_PRT_CFG,
+		       gmx_cfg.u64 & ~1ull);
+		adr_ctl.u64 = 0;
+		adr_ctl.s.bcst = 1; /* Reject broadcast */
+		csr_wr(oct_eth_info->gmx_base + GMX_RX_ADR_CTL, adr_ctl.u64);
+		csr_wr(oct_eth_info->gmx_base + GMX_RX_ADR_CAM_EN, 0);
+		csr_wr(oct_eth_info->gmx_base + GMX_PRT_CFG, gmx_cfg.u64);
+		break;
+	default:
+		printf("%s: Unknown mode %d for interface 0x%x:%d\n", __func__,
+		       mode, interface, index);
+		break;
+	}
+}
+
+void nic_stop(struct udevice *dev)
+{
+	octeon_eth_halt(dev);
+}
+
+int nic_write_hwaddr(struct udevice *dev)
+{
+	cvm_oct_set_mac_address(dev);
+
+	return 0;
+}
+
+static const struct eth_ops octeon_nic_ops = {
+	.start = nic_open,
+	.stop = nic_stop,
+	.send = nic_xmit,
+	.recv = nic_recv,
+	.free_pkt = nic_free_pkt,
+	.write_hwaddr = nic_write_hwaddr,
+};
+
+static const struct udevice_id octeon_nic_ids[] = {
+	{ .compatible = "cavium,octeon-7890-bgx" },
+	{}
+};
+
+U_BOOT_DRIVER(octeon_nic) = {
+	.name = "octeon_nic",
+	.id = UCLASS_ETH,
+	.probe = octeon_nic_probe,
+	.of_match = octeon_nic_ids,
+	.ops = &octeon_nic_ops,
+	.priv_auto = sizeof(struct octeon_eth_info),
+};
diff --git a/drivers/net/octeon/octeon_mdio.c b/drivers/net/octeon/octeon_mdio.c
new file mode 100644
index 000000000000..34ee80901fb6
--- /dev/null
+++ b/drivers/net/octeon/octeon_mdio.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier:    GPL-2.0
+/*
+ * Copyright (C) 2018-2022 Marvell International Ltd.
+ */
+
+#include <dm.h>
+#include <fdt_support.h>
+#include <log.h>
+#include <miiphy.h>
+#include <net.h>
+#include <linux/delay.h>
+
+#include <mach/cvmx-regs.h>
+#include <mach/cvmx-csr.h>
+#include <mach/octeon-model.h>
+#include <mach/octeon-feature.h>
+#include <mach/cvmx-smix-defs.h>
+#include <mach/cvmx-config.h>
+#include <mach/cvmx-helper.h>
+#include <mach/cvmx-helper-board.h>
+#include <mach/cvmx-mdio.h>
+
+#define CVMX_SMI_DRV_CTL   0x0001180000001828ull
+#define DEFAULT_MDIO_SPEED 2500000 /** 2.5 MHz default speed */
+
+/**
+ * cvmx_smi_drv_ctl
+ *
+ * Enables the SMI interface.
+ *
+ */
+union cvmx_smi_drv_ctl {
+	u64 u64;
+	struct cvmx_smi_drv_ctl_s {
+		u64 reserved_14_63 : 50;
+		u64 pctl : 6;
+		u64 reserved_6_7 : 2;
+		u64 nctl : 6;
+	} s;
+};
+
+struct octeon_mdiobus {
+	struct mii_dev *mii_dev;
+	/**
+	 * The local bus is in the lower 8 bits, followed by the remote bus in
+	 * the top 8 bits.  Bit 16 will be set if the bus is non-local.
+	 */
+	u32 bus_id;
+
+	int node;     /** Node number */
+	int speed;    /** Bus speed, normally 2.5 MHz */
+	int fdt_node; /** Node in FDT */
+	bool local;   /** true if local MDIO bus */
+};
+
+static int octeon_mdio_read(struct udevice *mdio_dev, int phy_addr,
+			    int dev_addr, int reg_addr)
+{
+	struct octeon_mdiobus *p = dev_get_priv(mdio_dev);
+	struct mii_dev *dev = p->mii_dev;
+	int value;
+
+	debug("%s(0x%p(%s): bus_id=%d phy_addr=%d, 0x%x, 0x%x) - ", __func__,
+	      dev, dev->name, p->bus_id, phy_addr, dev_addr, reg_addr);
+	if (IS_ENABLED(CONFIG_PHYLIB_10G) && dev_addr != MDIO_DEVAD_NONE) {
+		debug("clause 45 mode\n");
+		value = cvmx_mdio_45_read(p->bus_id & 0xff, phy_addr, dev_addr,
+					  reg_addr);
+	} else {
+		value = cvmx_mdio_read(p->bus_id & 0xff, phy_addr, reg_addr);
+	}
+
+	debug("Return value: 0x%x\n", value);
+	return value;
+}
+
+static int octeon_mdio_write(struct udevice *mdio_dev, int phy_addr,
+			     int dev_addr, int reg_addr, u16 value)
+{
+	struct octeon_mdiobus *p = dev_get_priv(mdio_dev);
+	struct mii_dev *dev = p->mii_dev;
+
+	debug("%s(0x%p(%s): bus_id=%d phy_addr=%d, 0x%x, 0x%x, 0x%x)\n",
+	      __func__, dev, dev->name, p->bus_id, phy_addr, dev_addr, reg_addr,
+	      value);
+
+	if (IS_ENABLED(CONFIG_PHYLIB_10G) && dev_addr != MDIO_DEVAD_NONE) {
+		debug("clause 45 mode\n");
+		return cvmx_mdio_45_write(p->bus_id & 0xff, phy_addr, dev_addr,
+					  reg_addr, value);
+	}
+
+	return cvmx_mdio_write(p->bus_id & 0xff, phy_addr, reg_addr, value);
+}
+
+/**
+ * Converts a MDIO register address to a bus number
+ *
+ * @param reg_addr	MDIO base register address
+ *
+ * @return	MDIO bus number or -1 if invalid address
+ */
+int octeon_mdio_reg_addr_to_bus(u64 reg_addr)
+{
+	int bus_base;
+	int bus;
+
+	/* Adjust the bus number based on the node number */
+	bus_base = cvmx_csr_addr_to_node(reg_addr) * 4;
+	reg_addr = cvmx_csr_addr_strip_node(reg_addr);
+
+	switch (reg_addr) {
+	case 0x1180000001800:
+	case 0x1180000003800: /* 68XX/78XX address */
+		bus = 0;
+		break;
+	case 0x1180000001900:
+	case 0x1180000003880:
+		bus = 1;
+		break;
+	case 0x1180000003900:
+		bus = 2;
+		break;
+	case 0x1180000003980:
+		bus = 3;
+		break;
+	default:
+		printf("%s: Unknown register address 0x%llx\n", __func__,
+		       reg_addr);
+		return -1;
+	}
+	bus += bus_base;
+	debug("%s: address 0x%llx is bus %d\n", __func__, reg_addr, bus);
+	return bus;
+}
+
+static int octeon_mdio_probe(struct udevice *dev)
+{
+	struct octeon_mdiobus *p = dev_get_priv(dev);
+	union cvmx_smi_drv_ctl drv_ctl;
+	cvmx_smix_clk_t smi_clk;
+	u64 mdio_addr;
+	int bus;
+	u64 sclock;
+	u32 sample_dly;
+	u64 denom;
+
+	mdio_addr = dev_read_addr(dev);
+	debug("%s: Translated address: 0x%llx\n", __func__, mdio_addr);
+	bus = octeon_mdio_reg_addr_to_bus(mdio_addr);
+	p->bus_id = bus;
+	debug("%s: bus: %d\n", __func__, bus);
+
+	drv_ctl.u64 = csr_rd(CVMX_SMI_DRV_CTL);
+	drv_ctl.s.pctl = dev_read_u32_default(dev, "cavium,pctl-drive-strength",
+					      drv_ctl.s.pctl);
+	drv_ctl.s.nctl = dev_read_u32_default(dev, "cavium,nctl-drive-strength",
+					      drv_ctl.s.nctl);
+	debug("%s: Set MDIO PCTL drive strength to 0x%x and NCTL drive strength to 0x%x\n",
+	      __func__, drv_ctl.s.pctl, drv_ctl.s.nctl);
+	csr_wr(CVMX_SMI_DRV_CTL, drv_ctl.u64);
+
+	/* Set the bus speed, default is 2.5MHz */
+	p->speed = dev_read_u32_default(dev, "cavium,max-speed",
+					DEFAULT_MDIO_SPEED);
+	sclock = gd->bus_clk;
+	smi_clk.u64 = csr_rd(CVMX_SMIX_CLK(bus & 3));
+	smi_clk.s.phase = sclock / (p->speed * 2);
+
+	/* Allow sample delay to be specified */
+	sample_dly = dev_read_u32_default(dev, "cavium,sample-delay", 0);
+	/* Only change the sample delay if it is set, otherwise use
+	 * the default value of 2.
+	 */
+	if (sample_dly) {
+		u32 sample;
+
+		denom = (sclock * 1000ULL) / sample_dly;
+		debug("%s: sclock: %llu, sample_dly: %u ps, denom: %llu\n",
+		      __func__, sclock, sample_dly, denom);
+		sample = (sclock + denom - 1) / denom;
+		debug("%s: sample: %u\n", __func__, smi_clk.s.sample);
+		if (sample < 2) {
+			printf("%s: warning: cavium,sample-delay %u ps is too small in device tree for %s\n",
+			       __func__, sample_dly, dev->name);
+			sample = 2;
+		}
+		if (sample > (2 * smi_clk.s.phase - 3)) {
+			printf("%s: warning: cavium,sample-delay %u ps is too large in device tree for %s\n",
+			       __func__, sample_dly, dev->name);
+			sample = 2 * smi_clk.s.phase - 3;
+		}
+		smi_clk.s.sample = sample & 0xf;
+		smi_clk.s.sample_hi = (sample >> 4) & 0xf;
+		debug("%s(%s): sample delay: %u ps (%d clocks)\n", __func__,
+		      dev->name, sample_dly, smi_clk.s.sample);
+	}
+	csr_wr(CVMX_SMIX_CLK(bus & 3), smi_clk.u64);
+
+	debug("mdio clock phase: %d clocks\n", smi_clk.s.phase);
+	csr_wr(CVMX_SMIX_CLK(bus & 3), smi_clk.u64);
+	debug("Enabling SMI interface %s\n", dev->name);
+	csr_wr(CVMX_SMIX_EN(bus & 3), 1);
+
+	/* Muxed MDIO bus support removed for now! */
+	return 0;
+}
+
+static const struct mdio_ops octeon_mdio_ops = {
+	.read = octeon_mdio_read,
+	.write = octeon_mdio_write,
+};
+
+static const struct udevice_id octeon_mdio_ids[] = {
+	{ .compatible = "cavium,octeon-3860-mdio" },
+	{}
+};
+
+U_BOOT_DRIVER(octeon_mdio) = {
+	.name = "octeon_mdio",
+	.id = UCLASS_MDIO,
+	.of_match = octeon_mdio_ids,
+	.probe = octeon_mdio_probe,
+	.ops = &octeon_mdio_ops,
+	.priv_auto = sizeof(struct octeon_mdiobus),
+};
-- 
2.35.1




More information about the U-Boot mailing list