[PATCH v2 1/3] rng: add OP-TEE based Random Number Generator

Heinrich Schuchardt xypron.glpk at gmx.de
Mon Mar 28 15:25:18 CEST 2022


On 3/28/22 15:11, Patrick Delaunay wrote:
> Add driver for OP-TEE based Random Number Generator on ARM SoCs
> where hardware entropy sources are not accessible to normal world
> and the RNG service is provided by a HWRNG Trusted Application (TA).
>
> This driver is based on the linux driver: char/hw_random/optee-rng.c
>
> Series_changes: 2
> - change SPDX-License-Identifier, becausee "GPL-2.0+” is obsolete
>    reference: https://spdx.dev/ids/
> - update Kconfig long help message as proposed by Heinrich
> - replace memset(.., 0, sizeof(..)) by struct initialisation (= {0};)
> - add function descriptions
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
>
> (no changes since v1)
>
>   MAINTAINERS             |   1 +
>   drivers/rng/Kconfig     |   9 ++
>   drivers/rng/Makefile    |   1 +
>   drivers/rng/optee_rng.c | 180 ++++++++++++++++++++++++++++++++++++++++
>   4 files changed, 191 insertions(+)
>   create mode 100644 drivers/rng/optee_rng.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f25ca7cd00..3356c65dd0 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -481,6 +481,7 @@ F:	drivers/power/regulator/stpmic1.c
>   F:	drivers/ram/stm32mp1/
>   F:	drivers/remoteproc/stm32_copro.c
>   F:	drivers/reset/stm32-reset.c
> +F:	drivers/rng/optee_rng.c
>   F:	drivers/rng/stm32mp1_rng.c
>   F:	drivers/rtc/stm32_rtc.c
>   F:	drivers/serial/serial_stm32.*
> diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig
> index b1c5ab93d1..c10f7d345b 100644
> --- a/drivers/rng/Kconfig
> +++ b/drivers/rng/Kconfig
> @@ -31,6 +31,15 @@ config RNG_MSM
>   	  This driver provides support for the Random Number
>   	  Generator hardware found on Qualcomm SoCs.
>
> +config RNG_OPTEE
> +	bool "OP-TEE based Random Number Generator support"
> +	depends on DM_RNG && OPTEE
> +	help
> +	  This driver provides support for the OP-TEE based Random Number
> +	  Generator on ARM SoCs where hardware entropy sources are not
> +	  accessible to normal world but reserved and used by the OP-TEE
> +	  to avoid the weakness of a software PRNG.
> +
>   config RNG_STM32MP1
>   	bool "Enable random number generator for STM32MP1"
>   	depends on ARCH_STM32MP
> diff --git a/drivers/rng/Makefile b/drivers/rng/Makefile
> index 39f7ee3f03..435b3b965a 100644
> --- a/drivers/rng/Makefile
> +++ b/drivers/rng/Makefile
> @@ -7,6 +7,7 @@ obj-$(CONFIG_DM_RNG) += rng-uclass.o
>   obj-$(CONFIG_RNG_MESON) += meson-rng.o
>   obj-$(CONFIG_RNG_SANDBOX) += sandbox_rng.o
>   obj-$(CONFIG_RNG_MSM) += msm_rng.o
> +obj-$(CONFIG_RNG_OPTEE) += optee_rng.o
>   obj-$(CONFIG_RNG_STM32MP1) += stm32mp1_rng.o
>   obj-$(CONFIG_RNG_ROCKCHIP) += rockchip_rng.o
>   obj-$(CONFIG_RNG_IPROC200) += iproc_rng200.o
> diff --git a/drivers/rng/optee_rng.c b/drivers/rng/optee_rng.c
> new file mode 100644
> index 0000000000..7be428ac91
> --- /dev/null
> +++ b/drivers/rng/optee_rng.c
> @@ -0,0 +1,180 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause
> +/*
> + * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
> + */
> +#define LOG_CATEGORY UCLASS_RNG
> +
> +#include <common.h>
> +
> +#include <rng.h>
> +#include <tee.h>
> +#include <dm/device.h>
> +#include <dm/device_compat.h>
> +#include <linux/sizes.h>
> +
> +#define TEE_ERROR_HEALTH_TEST_FAIL	0x00000001
> +
> +/*
> + * TA_CMD_GET_ENTROPY - Get Entropy from RNG
> + *
> + * param[0] (inout memref) - Entropy buffer memory reference
> + * param[1] unused
> + * param[2] unused
> + * param[3] unused
> + *
> + * Result:
> + * TEE_SUCCESS - Invoke command success
> + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> + * TEE_ERROR_NOT_SUPPORTED - Requested entropy size greater than size of pool
> + * TEE_ERROR_HEALTH_TEST_FAIL - Continuous health testing failed
> + */
> +#define TA_CMD_GET_ENTROPY		0x0
> +
> +#define MAX_ENTROPY_REQ_SZ		SZ_4K
> +
> +#define TA_HWRNG_UUID { 0xab7a617c, 0xb8e7, 0x4d8f, \
> +			{ 0x83, 0x01, 0xd0, 0x9b, 0x61, 0x03, 0x6b, 0x64 } }
> +
> +/**
> + * struct optee_rng_priv - OP-TEE Random Number Generator private data
> + * @session_id:		RNG TA session identifier.
> + */
> +struct optee_rng_priv {
> +	u32 session_id;
> +};
> +
> +/**
> + * get_optee_rng_data() - read RNG data from OP-TEE TA
> + *
> + * @dev:		device
> + * @entropy_shm_pool:	shared memory pool used for TEE message
> + * @buf:		buffer to receive data
> + * @size:		size of buffer, limited by entropy_shm_pool size
> + * Return:		0 if ok
> + */
> +static int get_optee_rng_data(struct udevice *dev,
> +			      struct tee_shm *entropy_shm_pool,
> +			      void *buf, size_t *size)
> +{
> +	struct optee_rng_priv *priv = dev_get_priv(dev);
> +	int ret = 0;
> +	struct tee_invoke_arg arg = {0};
> +	struct tee_param param = {0};
> +
> +	/* Invoke TA_CMD_GET_ENTROPY function of Trusted App */
> +	arg.func = TA_CMD_GET_ENTROPY;
> +	arg.session = priv->session_id;
> +
> +	/* Fill invoke cmd params */
> +	param.attr = TEE_PARAM_ATTR_TYPE_MEMREF_INOUT;
> +	param.u.memref.shm = entropy_shm_pool;
> +	param.u.memref.size = *size;
> +
> +	ret = tee_invoke_func(dev->parent, &arg, 1, &param);
> +	if (ret || arg.ret) {
> +		if (!ret)
> +			ret = -EPROTO;
> +		dev_err(dev, "TA_CMD_GET_ENTROPY invoke err: %d 0x%x\n", ret, arg.ret);
> +		*size = 0;
> +
> +		return ret;
> +	}
> +
> +	memcpy(buf, param.u.memref.shm->addr, param.u.memref.size);
> +	*size = param.u.memref.size;
> +
> +	return 0;
> +}
> +
> +/**
> + * optee_rng_read() - rng read ops for OP-TEE RNG device
> + *
> + * @dev:		device
> + * @buf:		buffer to receive data
> + * @len:		size of buffer
> + * Return:		0 if ok
> + */
> +static int optee_rng_read(struct udevice *dev, void *buf, size_t len)
> +{
> +	size_t read = 0, rng_size = 0;
> +	struct tee_shm *entropy_shm_pool;
> +	u8 *data = buf;
> +	int ret;
> +
> +	ret = tee_shm_alloc(dev->parent, MAX_ENTROPY_REQ_SZ, 0, &entropy_shm_pool);
> +	if (ret) {
> +		dev_err(dev, "tee_shm_alloc failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	while (read < len) {
> +		rng_size = min(len - read, (size_t)MAX_ENTROPY_REQ_SZ);
> +		ret = get_optee_rng_data(dev, entropy_shm_pool, data, &rng_size);
> +		if (ret)
> +			goto shm_free;
> +		data += rng_size;
> +		read += rng_size;
> +	}
> +
> +shm_free:
> +	tee_shm_free(entropy_shm_pool);
> +
> +	return ret;
> +}
> +
> +/**
> + * optee_rng_probe() - probe function for OP-TEE RNG device
> + *
> + * @dev:		device
> + * Return:		0 if ok
> + */
> +static int optee_rng_probe(struct udevice *dev)
> +{
> +	const struct tee_optee_ta_uuid uuid = TA_HWRNG_UUID;
> +	struct optee_rng_priv *priv = dev_get_priv(dev);
> +	struct tee_open_session_arg sess_arg = {0};
> +	int ret;
> +
> +	/* Open session with hwrng Trusted App */
> +	tee_optee_ta_uuid_to_octets(sess_arg.uuid, &uuid);
> +	sess_arg.clnt_login = TEE_LOGIN_PUBLIC;
> +
> +	ret = tee_open_session(dev->parent, &sess_arg, 0, NULL);
> +	if (ret || sess_arg.ret) {
> +		if (!ret)
> +			ret = -EIO;
> +		dev_err(dev, "can't open session: %d 0x%x\n", ret, sess_arg.ret);
> +		return ret;
> +	}
> +	priv->session_id = sess_arg.session;

Is it really necessary to keep the session open?
Or should we reopen a session whenever a random number is requested?

Best regards

Heinrich

> +
> +	return 0;
> +}
> +
> +/**
> + * optee_rng_remove() - remove function for OP-TEE RNG device
> + *
> + * @dev:		device
> + * Return:		0
> + */
> +static int optee_rng_remove(struct udevice *dev)
> +{
> +	struct optee_rng_priv *priv = dev_get_priv(dev);
> +
> +	tee_close_session(dev->parent, priv->session_id);
> +
> +	return 0;
> +}
> +
> +static const struct dm_rng_ops optee_rng_ops = {
> +	.read = optee_rng_read,
> +};
> +
> +U_BOOT_DRIVER(optee_rng) = {
> +	.name = "optee-rng",
> +	.id = UCLASS_RNG,
> +	.ops = &optee_rng_ops,
> +	.probe = optee_rng_probe,
> +	.remove = optee_rng_remove,
> +	.priv_auto = sizeof(struct optee_rng_priv),
> +};



More information about the U-Boot mailing list