[PATCH 24/52] mips: octeon: Add cvmx-agl.c
Stefan Roese
sr at denx.de
Wed Mar 30 12:07:00 CEST 2022
From: Aaron Williams <awilliams at marvell.com>
Import cvmx-agl.c from 2013 U-Boot. It will be used by the later
added drivers to support networking on the MIPS Octeon II / III
platforms.
Signed-off-by: Aaron Williams <awilliams at marvell.com>
Signed-off-by: Stefan Roese <sr at denx.de>
---
arch/mips/mach-octeon/cvmx-agl.c | 216 +++++++++++++++++++++++++++++++
1 file changed, 216 insertions(+)
create mode 100644 arch/mips/mach-octeon/cvmx-agl.c
diff --git a/arch/mips/mach-octeon/cvmx-agl.c b/arch/mips/mach-octeon/cvmx-agl.c
new file mode 100644
index 000000000000..9eea857e47c7
--- /dev/null
+++ b/arch/mips/mach-octeon/cvmx-agl.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2022 Marvell International Ltd.
+ *
+ * Functions for RGMII (MGMT) initialization, configuration,
+ * and monitoring.
+ */
+
+#include <log.h>
+#include <time.h>
+#include <linux/delay.h>
+
+#include <mach/cvmx-regs.h>
+#include <mach/cvmx-csr.h>
+#include <mach/cvmx-bootmem.h>
+#include <mach/octeon-model.h>
+#include <mach/cvmx-fuse.h>
+#include <mach/octeon-feature.h>
+#include <mach/cvmx-qlm.h>
+#include <mach/octeon_qlm.h>
+#include <mach/cvmx-pcie.h>
+#include <mach/cvmx-coremask.h>
+
+#include <mach/cvmx-pki.h>
+#include <mach/cvmx-helper.h>
+#include <mach/cvmx-helper-board.h>
+#include <mach/cvmx-helper-cfg.h>
+
+#include <mach/cvmx-agl.h>
+#include <mach/cvmx-agl-defs.h>
+
+/*
+ * @param port to enable
+ *
+ * @return Zero on success, negative on failure
+ */
+int cvmx_agl_enable(int port)
+{
+ cvmx_agl_gmx_rxx_frm_ctl_t rxx_frm_ctl;
+
+ rxx_frm_ctl.u64 = 0;
+ rxx_frm_ctl.s.pre_align = 1;
+ /* When set, disables the length check for non-min sized pkts with
+ * padding in the client data
+ */
+ rxx_frm_ctl.s.pad_len = 1;
+ /* When set, disables the length check for VLAN pkts */
+ rxx_frm_ctl.s.vlan_len = 1;
+ /* When set, PREAMBLE checking is less strict */
+ rxx_frm_ctl.s.pre_free = 1;
+ /* Control Pause Frames can match station SMAC */
+ rxx_frm_ctl.s.ctl_smac = 0;
+ /* Control Pause Frames can match globally assign Multicast address */
+ rxx_frm_ctl.s.ctl_mcst = 1;
+ rxx_frm_ctl.s.ctl_bck = 1; /* Forward pause information to TX block */
+ rxx_frm_ctl.s.ctl_drp = 1; /* Drop Control Pause Frames */
+ rxx_frm_ctl.s.pre_strp = 1; /* Strip off the preamble */
+ /* This port is configured to send PREAMBLE+SFD to begin every frame.
+ * GMX checks that the PREAMBLE is sent correctly
+ */
+ rxx_frm_ctl.s.pre_chk = 1;
+ csr_wr(CVMX_AGL_GMX_RXX_FRM_CTL(port), rxx_frm_ctl.u64);
+
+ return 0;
+}
+
+cvmx_helper_link_info_t cvmx_agl_link_get(int port)
+{
+ cvmx_helper_link_info_t result;
+ int interface, port_index;
+
+ /* Fake IPD port is used on some older models. */
+ if (port < 0)
+ return __cvmx_helper_board_link_get(port);
+
+ /* Simulator does not have PHY, use some defaults. */
+ interface = cvmx_helper_get_interface_num(port);
+ port_index = cvmx_helper_get_interface_index_num(port);
+ if (cvmx_helper_get_port_force_link_up(interface, port_index)) {
+ result.u64 = 0;
+ result.s.full_duplex = 1;
+ result.s.link_up = 1;
+ result.s.speed = 1000;
+ return result;
+ }
+
+ return __cvmx_helper_board_link_get(port);
+}
+
+/*
+ * Set MII/RGMII link based on mode.
+ *
+ * @param port interface port to set the link.
+ * @param link_info Link status
+ *
+ * @return 0 on success and 1 on failure
+ */
+int cvmx_agl_link_set(int port, cvmx_helper_link_info_t link_info)
+{
+ cvmx_agl_gmx_prtx_cfg_t agl_gmx_prtx;
+
+ /* Disable GMX before we make any changes. */
+ agl_gmx_prtx.u64 = csr_rd(CVMX_AGL_GMX_PRTX_CFG(port));
+ agl_gmx_prtx.s.en = 0;
+ agl_gmx_prtx.s.tx_en = 0;
+ agl_gmx_prtx.s.rx_en = 0;
+ csr_wr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64);
+
+ if (OCTEON_IS_MODEL(OCTEON_CN6XXX) || OCTEON_IS_OCTEON3()) {
+ u64 one_second = 0x1000000; /* todo: this needs checking */
+
+ /* Wait for GMX to be idle */
+ if (CVMX_WAIT_FOR_FIELD64(CVMX_AGL_GMX_PRTX_CFG(port),
+ cvmx_agl_gmx_prtx_cfg_t, rx_idle, ==,
+ 1, one_second) ||
+ CVMX_WAIT_FOR_FIELD64(CVMX_AGL_GMX_PRTX_CFG(port),
+ cvmx_agl_gmx_prtx_cfg_t, tx_idle, ==,
+ 1, one_second)) {
+ debug("AGL%d: Timeout waiting for GMX to be idle\n",
+ port);
+ return -1;
+ }
+ }
+
+ agl_gmx_prtx.u64 = csr_rd(CVMX_AGL_GMX_PRTX_CFG(port));
+
+ /* Set duplex mode */
+ if (!link_info.s.link_up)
+ agl_gmx_prtx.s.duplex = 1; /* Force full duplex on down links */
+ else
+ agl_gmx_prtx.s.duplex = link_info.s.full_duplex;
+
+ switch (link_info.s.speed) {
+ case 10:
+ agl_gmx_prtx.s.speed = 0;
+ agl_gmx_prtx.s.slottime = 0;
+ if (OCTEON_IS_MODEL(OCTEON_CN6XXX) || OCTEON_IS_OCTEON3()) {
+ agl_gmx_prtx.s.speed_msb = 1;
+ agl_gmx_prtx.s.burst = 1;
+ }
+ break;
+
+ case 100:
+ agl_gmx_prtx.s.speed = 0;
+ agl_gmx_prtx.s.slottime = 0;
+ if (OCTEON_IS_MODEL(OCTEON_CN6XXX) || OCTEON_IS_OCTEON3()) {
+ agl_gmx_prtx.s.speed_msb = 0;
+ agl_gmx_prtx.s.burst = 1;
+ }
+ break;
+
+ case 1000:
+ /* 1000 MBits is only supported on 6XXX chips */
+ if (OCTEON_IS_MODEL(OCTEON_CN6XXX) || OCTEON_IS_OCTEON3()) {
+ agl_gmx_prtx.s.speed_msb = 0;
+ agl_gmx_prtx.s.speed = 1;
+ agl_gmx_prtx.s.slottime =
+ 1; /* Only matters for half-duplex */
+ agl_gmx_prtx.s.burst = agl_gmx_prtx.s.duplex;
+ }
+ break;
+
+ /* No link */
+ case 0:
+ default:
+ break;
+ }
+
+ /* Write the new GMX setting with the port still disabled. */
+ csr_wr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64);
+
+ /* Read GMX CFG again to make sure the config is completed. */
+ agl_gmx_prtx.u64 = csr_rd(CVMX_AGL_GMX_PRTX_CFG(port));
+
+ if (OCTEON_IS_MODEL(OCTEON_CN6XXX) || OCTEON_IS_OCTEON3()) {
+ cvmx_agl_gmx_txx_clk_t agl_clk;
+ cvmx_agl_prtx_ctl_t prt_ctl;
+
+ prt_ctl.u64 = csr_rd(CVMX_AGL_PRTX_CTL(port));
+ agl_clk.u64 = csr_rd(CVMX_AGL_GMX_TXX_CLK(port));
+ /* MII (both speeds) and RGMII 1000 setting */
+ agl_clk.s.clk_cnt = 1;
+ /* Check other speeds for RGMII mode */
+ if (prt_ctl.s.mode == 0 || OCTEON_IS_OCTEON3()) {
+ if (link_info.s.speed == 10)
+ agl_clk.s.clk_cnt = 50;
+ else if (link_info.s.speed == 100)
+ agl_clk.s.clk_cnt = 5;
+ }
+ csr_wr(CVMX_AGL_GMX_TXX_CLK(port), agl_clk.u64);
+ }
+
+ /* Enable transmit and receive ports */
+ agl_gmx_prtx.s.tx_en = 1;
+ agl_gmx_prtx.s.rx_en = 1;
+ csr_wr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64);
+
+ /* Enable the link. */
+ agl_gmx_prtx.s.en = 1;
+ csr_wr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64);
+
+ if (OCTEON_IS_OCTEON3()) {
+ union cvmx_agl_prtx_ctl agl_prtx_ctl;
+ /* Enable the interface, set clkrst */
+ agl_prtx_ctl.u64 = csr_rd(CVMX_AGL_PRTX_CTL(port));
+ agl_prtx_ctl.s.clkrst = 1;
+ csr_wr(CVMX_AGL_PRTX_CTL(port), agl_prtx_ctl.u64);
+ csr_rd(CVMX_AGL_PRTX_CTL(port));
+ agl_prtx_ctl.s.enable = 1;
+ csr_wr(CVMX_AGL_PRTX_CTL(port), agl_prtx_ctl.u64);
+ /* Read the value back to force the previous write */
+ csr_rd(CVMX_AGL_PRTX_CTL(port));
+ }
+
+ return 0;
+}
--
2.35.1
More information about the U-Boot
mailing list