[PATCH 13/22] Convert CONFIG_LPUART et al to Kconfig
Tom Rini
trini at konsulko.com
Wed Mar 23 22:20:00 CET 2022
This converts the following to Kconfig:
CONFIG_LPUART
CONFIG_LPUART_32B_REG
And note that CONFIG_LPUART_32B_REG is unused in code.
Signed-off-by: Tom Rini <trini at konsulko.com>
---
configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 2 +-
configs/ls1021aqds_nor_lpuart_defconfig | 2 +-
configs/ls1021atwr_nor_lpuart_defconfig | 2 +-
configs/ls1028aqds_tfa_lpuart_defconfig | 2 +-
configs/ls1043aqds_lpuart_defconfig | 2 +-
configs/ls1046aqds_lpuart_defconfig | 2 +-
drivers/serial/Kconfig | 4 ++++
include/configs/ls1021aqds.h | 4 +---
include/configs/ls1021atwr.h | 4 +---
include/configs/ls1028aqds.h | 1 -
include/configs/ls1043aqds.h | 5 -----
include/configs/ls1046aqds.h | 1 -
12 files changed, 12 insertions(+), 19 deletions(-)
diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
index aedc12a46939..7766f1244c66 100644
--- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
@@ -20,7 +20,6 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_BOOTDELAY=3
CONFIG_SILENT_CONSOLE=y
@@ -88,6 +87,7 @@ CONFIG_SYS_QE_FW_ADDR=0x60940000
CONFIG_DM_SCSI=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig
index 56e00a70b116..43f93f4324dc 100644
--- a/configs/ls1021aqds_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_nor_lpuart_defconfig
@@ -20,7 +20,6 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_BOOTDELAY=3
CONFIG_SILENT_CONSOLE=y
@@ -89,6 +88,7 @@ CONFIG_SYS_QE_FW_ADDR=0x60940000
CONFIG_DM_SCSI=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig
index 5bb3175df41a..973b499fc920 100644
--- a/configs/ls1021atwr_nor_lpuart_defconfig
+++ b/configs/ls1021atwr_nor_lpuart_defconfig
@@ -20,7 +20,6 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
@@ -76,6 +75,7 @@ CONFIG_SYS_QE_FW_ADDR=0x60940000
CONFIG_DM_SCSI=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
diff --git a/configs/ls1028aqds_tfa_lpuart_defconfig b/configs/ls1028aqds_tfa_lpuart_defconfig
index 1d0e303da2e1..0f4a33c66d1e 100644
--- a/configs/ls1028aqds_tfa_lpuart_defconfig
+++ b/configs/ls1028aqds_tfa_lpuart_defconfig
@@ -22,7 +22,6 @@ CONFIG_MP=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32 at 60 cma=256M"
@@ -90,6 +89,7 @@ CONFIG_DM_SCSI=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_DSPI=y
diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig
index d583573f1794..105fc5a0d891 100644
--- a/configs/ls1043aqds_lpuart_defconfig
+++ b/configs/ls1043aqds_lpuart_defconfig
@@ -25,7 +25,6 @@ CONFIG_REMAKE_ELF=y
CONFIG_MP=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
@@ -92,6 +91,7 @@ CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_DM_SCSI=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_USB=y
diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig
index 282cb435007d..47636f10e214 100644
--- a/configs/ls1046aqds_lpuart_defconfig
+++ b/configs/ls1046aqds_lpuart_defconfig
@@ -25,7 +25,6 @@ CONFIG_REMAKE_ELF=y
CONFIG_MP=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
@@ -93,6 +92,7 @@ CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_DM_SCSI=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_DSPI=y
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 345d1881f552..610f8062c76b 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -647,6 +647,10 @@ config FSL_LPUART
Select this to enable a Low Power UART for Freescale VF610 and
QorIQ Layerscape devices.
+config LPUART
+ bool "Use the LPUART as console"
+ depends on FSL_LPUART
+
config MVEBU_A3700_UART
bool "UART support for Armada 3700"
help
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 91e73c7d4569..b97d2ea05f84 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -268,9 +268,7 @@
/*
* Serial Port
*/
-#ifdef CONFIG_LPUART
-#define CONFIG_LPUART_32B_REG
-#else
+#ifndef CONFIG_LPUART
#define CONFIG_SYS_NS16550_SERIAL
#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index f5d40aa3023b..8e5f6a560cf2 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -165,9 +165,7 @@
/*
* Serial Port
*/
-#ifdef CONFIG_LPUART
-#define CONFIG_LPUART_32B_REG
-#else
+#ifndef CONFIG_LPUART
#define CONFIG_SYS_NS16550_SERIAL
#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index 1b4d181310fa..843cd5991500 100644
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -66,7 +66,6 @@
/* LPUART */
#ifdef CONFIG_LPUART
-#define CONFIG_LPUART_32B_REG
#define CFG_LPUART_MUX_MASK 0xf0
#define CFG_LPUART_EN 0xf0
#endif
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index e9919cd05f7a..bc02ac5ccb69 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -39,11 +39,6 @@
#define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB
#endif
-/* LPUART */
-#ifdef CONFIG_LPUART
-#define CONFIG_LPUART_32B_REG
-#endif
-
/* SATA */
/* EEPROM */
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 2972e3beac22..ce68d3f929fc 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -54,7 +54,6 @@
/* LPUART */
#ifdef CONFIG_LPUART
-#define CONFIG_LPUART_32B_REG
#define CFG_UART_MUX_MASK 0x6
#define CFG_UART_MUX_SHIFT 1
#define CFG_LPUART_EN 0x2
--
2.25.1
More information about the U-Boot
mailing list