[PATCH 3/7] Finish converting CONFIG_BOOTM_NETBSD et al to Kconfig
Tom Rini
trini at konsulko.com
Tue Mar 22 02:33:29 CET 2022
This converts the following to Kconfig:
CONFIG_BOOTM_NETBSD
CONFIG_BOOTM_RTEMS
CONFIG_DESIGNWARE_WATCHDOG
CONFIG_DISPLAY_CPUINFO
CONFIG_DM_ETH
CONFIG_DM_MMC
CONFIG_DM_REGULATOR
CONFIG_DM_SPI
CONFIG_DM_SPI_FLASH
CONFIG_ISO_PARTITION
CONFIG_OF_SEPARATE
CONFIG_SPI_FLASH_WINBOND
CONFIG_SPL_ETH
CONFIG_TIMER
CONFIG_USB_DWC3
CONFIG_USB_DWC3_GADGET
CONFIG_USB_DWC3_OMAP
CONFIG_USB_DWC3_PHY_OMAP
CONFIG_USB_EHCI_TEGRA
CONFIG_USB_GADGET_DOWNLOAD
CONFIG_USB_GADGET_DUALSPEED
CONFIG_USB_GADGET_MANUFACTURER
CONFIG_USB_GADGET_PRODUCT_NUM
CONFIG_USB_GADGET_VBUS_DRAW
CONFIG_USB_GADGET_VENDOR_NUM
This catches a number of cases where board config files were #undef
various CONFIG options when building SPL, and that doesn't work. Clean
up the related comments as well.
Signed-off-by: Tom Rini <trini at konsulko.com>
---
configs/s5p4418_nanopi2_defconfig | 2 ++
include/config_uncmd_spl.h | 1 -
include/configs/adp-ae3xx.h | 6 ------
include/configs/adp-ag101p.h | 6 ------
include/configs/am335x_evm.h | 20 --------------------
include/configs/am335x_shc.h | 10 ----------
include/configs/am43xx_evm.h | 22 ----------------------
include/configs/chiliboard.h | 10 ----------
include/configs/display5.h | 6 ------
include/configs/imx8mm_icore_mx8mm.h | 1 -
include/configs/imx8mm_venice.h | 1 -
include/configs/imx8mn_venice.h | 1 -
include/configs/imx8mp_evk.h | 2 --
include/configs/imx8mq_evk.h | 2 --
include/configs/imx8mq_phanbell.h | 2 --
include/configs/ls1088a_common.h | 3 ---
include/configs/novena.h | 5 -----
include/configs/opos6uldev.h | 4 ----
include/configs/pico-imx8mq.h | 2 --
include/configs/rcar-gen2-common.h | 10 ----------
include/configs/s5p4418_nanopi2.h | 6 ------
include/configs/socfpga_soc64_common.h | 3 ---
include/configs/tegra-common-post.h | 10 ----------
include/configs/ti816x_evm.h | 12 ------------
include/configs/ti_omap5_common.h | 3 ---
include/configs/topic_miami.h | 8 --------
include/configs/verdin-imx8mm.h | 1 -
include/configs/verdin-imx8mp.h | 1 -
28 files changed, 2 insertions(+), 158 deletions(-)
diff --git a/configs/s5p4418_nanopi2_defconfig b/configs/s5p4418_nanopi2_defconfig
index 0e17e759b587..02c17d010810 100644
--- a/configs/s5p4418_nanopi2_defconfig
+++ b/configs/s5p4418_nanopi2_defconfig
@@ -27,6 +27,8 @@ CONFIG_BOARD_LATE_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="nanopi2# "
CONFIG_CMD_BOOTZ=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_RTEMS is not set
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
diff --git a/include/config_uncmd_spl.h b/include/config_uncmd_spl.h
index af7e3e49fddf..a59b9bbafbdf 100644
--- a/include/config_uncmd_spl.h
+++ b/include/config_uncmd_spl.h
@@ -13,7 +13,6 @@
#ifndef CONFIG_SPL_DM
#undef CONFIG_DM_SERIAL
#undef CONFIG_DM_I2C
-#undef CONFIG_DM_SPI
#endif
#undef CONFIG_DM_STDIO
diff --git a/include/configs/adp-ae3xx.h b/include/configs/adp-ae3xx.h
index cac78479db08..e54a2b67f8e7 100644
--- a/include/configs/adp-ae3xx.h
+++ b/include/configs/adp-ae3xx.h
@@ -17,12 +17,6 @@
#define CONFIG_SKIP_TRUNOFF_WATCHDOG
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#ifdef CONFIG_OF_CONTROL
-#undef CONFIG_OF_SEPARATE
-#endif
-#endif
-
/*
* Timer
*/
diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h
index d05a4d048f3e..bfaa7f90c003 100644
--- a/include/configs/adp-ag101p.h
+++ b/include/configs/adp-ag101p.h
@@ -19,12 +19,6 @@
#define CONFIG_MEM_REMAP
#endif
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#ifdef CONFIG_OF_CONTROL
-#undef CONFIG_OF_SEPARATE
-#endif
-#endif
-
/*
* Timer
*/
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 4db04ff54e7e..e786672b83da 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -196,26 +196,6 @@
#endif
#endif /* !CONFIG_MTD_RAW_NAND */
-/*
- * For NOR boot, we must set this to the start of where NOR is mapped
- * in memory.
- */
-
-/*
- * Disable MMC DM for SPL build and can be re-enabled after adding
- * DM support in SPL
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_MMC
-#undef CONFIG_TIMER
-#endif
-
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USB_ETHER)
-/* Remove other SPL modes. */
-/* disable host part of MUSB in SPL */
-/* disable EFI partitions and partition UUID support */
-#endif
-
/* USB Device Firmware Update support */
#ifndef CONFIG_SPL_BUILD
#define DFUARGS \
diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h
index 62d64ff52256..4c8df57bdf0d 100644
--- a/include/configs/am335x_shc.h
+++ b/include/configs/am335x_shc.h
@@ -148,14 +148,4 @@
/* PMIC support */
#define CONFIG_POWER_TPS65217
-/* SPL */
-
-/*
- * Disable MMC DM for SPL build and can be re-enabled after adding
- * DM support in SPL
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_MMC
-#undef CONFIG_TIMER
-#endif
#endif /* ! __CONFIG_AM335X_SHC_H */
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index e4bd13b47dcc..5057441f7506 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -56,28 +56,6 @@
#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
#endif
-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USB_GADGET)
-#undef CONFIG_USB_DWC3_PHY_OMAP
-#undef CONFIG_USB_DWC3_OMAP
-#undef CONFIG_USB_DWC3
-#undef CONFIG_USB_DWC3_GADGET
-
-#undef CONFIG_USB_GADGET_DOWNLOAD
-#undef CONFIG_USB_GADGET_VBUS_DRAW
-#undef CONFIG_USB_GADGET_MANUFACTURER
-#undef CONFIG_USB_GADGET_VENDOR_NUM
-#undef CONFIG_USB_GADGET_PRODUCT_NUM
-#undef CONFIG_USB_GADGET_DUALSPEED
-#endif
-
-/*
- * Disable MMC DM for SPL build and can be re-enabled after adding
- * DM support in SPL
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_TIMER
-#endif
-
#ifndef CONFIG_SPL_BUILD
/* USB Device Firmware Update support */
#define DFUARGS \
diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
index aa2a07e910f8..ad1cd864c858 100644
--- a/include/configs/chiliboard.h
+++ b/include/configs/chiliboard.h
@@ -125,16 +125,6 @@
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-/* NAND: SPL related configs */
-
-/*
- * Disable MMC DM for SPL build and can be re-enabled after adding
- * DM support in SPL
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_MMC
-#undef CONFIG_TIMER
-#endif
#if defined(CONFIG_ENV_IS_IN_NAND)
#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
diff --git a/include/configs/display5.h b/include/configs/display5.h
index 72526d9bb82d..7bd653364d33 100644
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -33,12 +33,6 @@
* 0x1F00000 - 0x2000000 : SPI.factory (1MiB)
*/
-/* SPI Flash Configs */
-#if defined(CONFIG_SPL_BUILD)
-#undef CONFIG_DM_SPI
-#undef CONFIG_DM_SPI_FLASH
-#endif
-
/* Below values are "dummy" - only to avoid build break */
#define CONFIG_SYS_SPI_KERNEL_OFFS 0x150000
#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h
index d75fcf747e41..f521add5b046 100644
--- a/include/configs/imx8mm_icore_mx8mm.h
+++ b/include/configs/imx8mm_icore_mx8mm.h
@@ -33,7 +33,6 @@
func(MMC, mmc, 2) \
func(MMC, mmc, 0)
#include <config_distro_bootcmd.h>
-#undef CONFIG_ISO_PARTITION
#else
#define BOOTENV
#endif
diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h
index 1ec27f40f2b5..a4abf1f52819 100644
--- a/include/configs/imx8mm_venice.h
+++ b/include/configs/imx8mm_venice.h
@@ -41,7 +41,6 @@
func(MMC, mmc, 2) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#undef CONFIG_ISO_PARTITION
#else
#define BOOTENV
#endif
diff --git a/include/configs/imx8mn_venice.h b/include/configs/imx8mn_venice.h
index c01a590c8af6..81f9574340c3 100644
--- a/include/configs/imx8mn_venice.h
+++ b/include/configs/imx8mn_venice.h
@@ -38,7 +38,6 @@
func(MMC, mmc, 2) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#undef CONFIG_ISO_PARTITION
#else
#define BOOTENV
#endif
diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h
index fe07a3cde626..5b185cf1de23 100644
--- a/include/configs/imx8mp_evk.h
+++ b/include/configs/imx8mp_evk.h
@@ -26,8 +26,6 @@
#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-#undef CONFIG_DM_MMC
-
#define CONFIG_POWER_PCA9450
#endif
diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index 8fff3bf632e8..7389d75dceb3 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -29,8 +29,6 @@
/* For RAW image gives a error info not panic */
#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-#undef CONFIG_DM_MMC
-
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
#endif
diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h
index 6919f6d660ec..f40cacaed43f 100644
--- a/include/configs/imx8mq_phanbell.h
+++ b/include/configs/imx8mq_phanbell.h
@@ -25,8 +25,6 @@
#define CONFIG_MALLOC_F_ADDR 0x182000
/* For RAW image gives a error info not panic */
#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-
-#undef CONFIG_DM_MMC
#endif
/* ENET Config */
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 121fd3cf1822..0c73a9e0dce4 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -17,7 +17,6 @@
#define SPL_NO_SATA
#define SPL_NO_QSPI
#define SPL_NO_IFC
-#undef CONFIG_DISPLAY_CPUINFO
#endif
#include <asm/arch/stream_id_lsch3.h>
@@ -131,8 +130,6 @@ unsigned long long get_qixis_addr(void);
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
-/* #define CONFIG_DISPLAY_CPUINFO */
-
#ifndef SPL_NO_ENV
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/novena.h b/include/configs/novena.h
index c11d13a3483a..dbde7a0ade5a 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -42,11 +42,6 @@
/* SPL */
#include "imx6_spl.h" /* common IMX6 SPL configuration */
-/* Ethernet Configuration */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_ETH
-#endif
-
/* I2C */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_SPD_BUS_NUM 0
diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h
index ac8eb0527569..54b1a78affb6 100644
--- a/include/configs/opos6uldev.h
+++ b/include/configs/opos6uldev.h
@@ -12,10 +12,6 @@
#ifdef CONFIG_SPL
#include "imx6_spl.h"
-
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_REGULATOR
-#endif
#endif
/* Miscellaneous configurable options */
diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h
index 26946cd65ac6..a7ad4f35285d 100644
--- a/include/configs/pico-imx8mq.h
+++ b/include/configs/pico-imx8mq.h
@@ -25,8 +25,6 @@
#define CONFIG_MALLOC_F_ADDR 0x182000
/* For RAW image gives a error info not panic */
#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-
-#undef CONFIG_DM_MMC
#endif
/* ENET Config */
diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h
index f1f5d07bf81a..380156be4379 100644
--- a/include/configs/rcar-gen2-common.h
+++ b/include/configs/rcar-gen2-common.h
@@ -28,16 +28,6 @@
#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-/* ENV setting */
-
-/* Common ENV setting */
-
-/* SF MTD */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_SPI
-#undef CONFIG_DM_SPI_FLASH
-#endif
-
/* Timer */
#define CONFIG_TMU_TIMER
#define CONFIG_SYS_TIMER_COUNTS_DOWN
diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h
index 632fc0cc9eef..f0c72cab8346 100644
--- a/include/configs/s5p4418_nanopi2.h
+++ b/include/configs/s5p4418_nanopi2.h
@@ -88,12 +88,6 @@
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-/*-----------------------------------------------------------------------
- * Etc Command definition
- */
-#undef CONFIG_BOOTM_NETBSD
-#undef CONFIG_BOOTM_RTEMS
-
/*-----------------------------------------------------------------------
* serial console configuration
*/
diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h
index a06ac6b59687..601826d44ac8 100644
--- a/include/configs/socfpga_soc64_common.h
+++ b/include/configs/socfpga_soc64_common.h
@@ -137,9 +137,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
/*
* L4 Watchdog
*/
-#ifndef CONFIG_SPL_BUILD
-#undef CONFIG_DESIGNWARE_WATCHDOG
-#endif
#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
#ifdef CONFIG_TARGET_SOCFPGA_STRATIX10
#ifndef __ASSEMBLY__
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index 7cb8d64e4400..d9d89b6d7581 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -95,14 +95,4 @@
#define CONFIG_TEGRA_SPI
#endif
-/* overrides for SPL build here */
-#ifdef CONFIG_SPL_BUILD
-
-/* remove USB */
-#ifdef CONFIG_USB_EHCI_TEGRA
-#undef CONFIG_USB_EHCI_TEGRA
-#endif
-
-#endif /* CONFIG_SPL_BUILD */
-
#endif /* __TEGRA_COMMON_POST_H */
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index 05f787473a5c..c2dfdebcd5b6 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -68,16 +68,4 @@
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)
-/* Since SPL did pll and ddr initialization for us,
- * we don't need to do it twice.
- */
-
-/*
- * Disable MMC DM for SPL build and can be re-enabled after adding
- * DM support in SPL
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_MMC
-#undef CONFIG_TIMER
-#endif
#endif
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index 270ef9598d2d..714a1c55c7fb 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -307,8 +307,5 @@
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 << 20))
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_TIMER
-#endif
#endif /* __CONFIG_TI_OMAP5_COMMON_H */
diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h
index ba6c3f0cec34..f859656b396c 100644
--- a/include/configs/topic_miami.h
+++ b/include/configs/topic_miami.h
@@ -17,18 +17,10 @@
/* Fixup settings */
/* SPL settings */
-#undef CONFIG_SPL_ETH
#undef CONFIG_SPL_MAX_FOOTPRINT
#define CONFIG_SPL_MAX_FOOTPRINT CONFIG_SYS_SPI_U_BOOT_OFFS
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-/* FPGA commands that we don't use */
-
-/* Extras */
-
-/* Faster flash, ours may run at 108 MHz */
-#undef CONFIG_SPI_FLASH_WINBOND
-
/* Setup proper boot sequences for Miami boards */
#if defined(CONFIG_USB_HOST)
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index de84e3b66350..9fe6231e8d25 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -42,7 +42,6 @@
func(MMC, mmc, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#undef CONFIG_ISO_PARTITION
#else
#define BOOTENV
#endif
diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h
index 9a7dedf1ea57..9e29dc19033f 100644
--- a/include/configs/verdin-imx8mp.h
+++ b/include/configs/verdin-imx8mp.h
@@ -54,7 +54,6 @@
func(MMC, mmc, 2) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#undef CONFIG_ISO_PARTITION
#else
#define BOOTENV
#endif
--
2.25.1
More information about the U-Boot
mailing list