[PATCH v3] spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode
Patrice Chotard
patrice.chotard at foss.st.com
Mon Mar 7 18:50:34 CET 2022
Since commit e2e95e5e2542 ("spi: Update speed/mode on change")
when calling "sf probe" or "env save" on SPI flash,
spi_set_speed_mode() is called twice.
spi_get_bus_and_cs()
|--> spi_claim_bus()
| |--> spi_set_speed_mode(speed and mode from DT)
...
|--> spi_set_speed_mode(default speed and mode value)
The first spi_set_speed_mode() call is done with speed and mode
values from DT, whereas the second call is done with speed
and mode set to default value (speed is set to CONFIG_SF_DEFAULT_SPEED)
This is an issue because SPI flash performance are impacted by
using default speed which can be lower than the one defined in DT.
One solution is to set CONFIG_SF_DEFAULT_SPEED to the speed defined
in DT, but we loose flexibility offered by DT.
Another issue can be encountered with 2 SPI flashes using 2 different
speeds. In this specific case usage of CONFIG_SF_DEFAULT_SPEED is not
flexible compared to get the 2 different speeds from DT.
To fix this issue, the legacy spi_get_bus_and_cs() is renamed to
_spi_get_bus_and_cs() and keep the same behaviour.
Add a new spi_get_bus_and_cs() which rely on DT for spi speed and mode
values.
Now, spi_flash_probe_bus_cs() relies on DT for spi speed and mode
and logically calls spi_get_bus_and_cs(). In case spi mode and speed are
not read from DT, make usage of spi_flash_probe().
This patch impacts the following :
- cmd/sf.c: if spi mode and/or speed is passed in argument, call
spi_flash_probe() otherwise call spi_flash_probe_bus_cs().
_ cmd/spi.c: keep legacy, replace spi_get_bus_and_cs() by
_spi_get_bus_and_cs()
_ drivers/net/fm/fm.c: no impact as by default spi speed and mode
was set to 0 and a comment indicates that speed and mode are read
from DT.
_ drivers/net/pfe_eth/pfe_firmware.c: spi speed and mode are not read
from DT by all platforms using this driver, so keep legacy and replace
spi_flash_probe_bus_cs() by spi_flash_probe();
_ drivers/usb/gadget/max3420_udc.c: spi speed and mode are not read
from DT, keep legacy, replace spi_get_bus_and_cs() by
_spi_get_bus_and_cs()
_ drivers/net/sni_netsec.c : spi speed and mode are not read from DT,
so replace spi_flash_probe_bus_cs() by spi_flash_probe().
_ drivers/usb/gadget/max3420_udc.c: Can't find any platform which make
usage of this driver, nevertheless, keep legacy and replace
spi_get_bus_and_cs() by _spi_get_bus_and_cs().
_ env/sf.c: no impact, as by default spi speed and mode
was set to 0 and a comment indicates that speed and mode are read
from DT.
- update test/dm/spi.c: when spi_get_bus_and_cs() was used wihtout
driver and device name, no change.
When spi_get_bus_and_cs() was used with driver and device name,
use the legacy by calling _spi_get_bus_and_cs().
Cc: Marek Behun <marek.behun at nic.cz>
Cc: Jagan Teki <jagan at amarulasolutions.com>
Cc: Vignesh R <vigneshr at ti.com>
Cc: Joe Hershberger <joe.hershberger at ni.com>
Cc: Ramon Fried <rfried.dev at gmail.com>
Cc: Lukasz Majewski <lukma at denx.de>
Cc: Marek Vasut <marex at denx.de>
Cc: Wolfgang Denk <wd at denx.de>
Cc: Simon Glass <sjg at chromium.org>
Cc: Stefan Roese <sr at denx.de>
Cc: "Pali Rohár" <pali at kernel.org>
Cc: Konstantin Porotchkin <kostap at marvell.com>
Cc: Igal Liberman <igall at marvell.com>
Cc: Bin Meng <bmeng.cn at gmail.com>
Cc: Pratyush Yadav <p.yadav at ti.com>
Cc: Sean Anderson <seanga2 at gmail.com>
Cc: Anji J <anji.jagarlmudi at nxp.com>
Cc: Biwen Li <biwen.li at nxp.com>
Cc: Priyanka Jain <priyanka.jain at nxp.com>
Cc: Chaitanya Sakinam <chaitanya.sakinam at nxp.com>
Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
---
Changes in v3:
- Update commit header to reflect what the patch really do.
- Rename legacy spi_get_bus_and_cs() to _spi_get_bus_and_cs().
- New spi_get_bus_and_cs() rely on DT for spi speed and mode values.
- spi_flash_probe_bus_cs() rely also on DT for spi and mode values.
Changes in v2:
- add spi_flash_probe_bus_cs_default() which calls spi_get_bus_and_cs()
with "use_dt" param set to true, whereas spi_flash_probe_bus_cs() calls
spi_get_bus_and_cs() with "use_dt" param set to true.
board/CZ.NIC/turris_mox/turris_mox.c | 5 +--
cmd/sf.c | 15 +++++--
cmd/spi.c | 4 +-
drivers/mtd/spi/sf-uclass.c | 34 ++++++++-------
drivers/net/fm/fm.c | 4 +-
drivers/net/pfe_eth/pfe_firmware.c | 15 +------
drivers/net/sni_netsec.c | 6 +--
drivers/spi/spi-uclass.c | 65 +++++++++++++++++++++++++---
drivers/usb/gadget/max3420_udc.c | 4 +-
env/sf.c | 1 -
include/spi.h | 19 +++++++-
include/spi_flash.h | 1 -
test/dm/spi.c | 32 +++++++-------
13 files changed, 134 insertions(+), 71 deletions(-)
diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c
index 8888a2dcab..8fec1622cd 100644
--- a/board/CZ.NIC/turris_mox/turris_mox.c
+++ b/board/CZ.NIC/turris_mox/turris_mox.c
@@ -148,9 +148,8 @@ static int mox_do_spi(u8 *in, u8 *out, size_t size)
struct udevice *dev;
int ret;
- ret = spi_get_bus_and_cs(0, 1, 1000000, SPI_CPHA | SPI_CPOL,
- "spi_generic_drv", "moxtet at 1", &dev,
- &slave);
+ ret = _spi_get_bus_and_cs(0, 1, 1000000, SPI_CPHA | SPI_CPOL,
+ "spi_generic_drv", "moxtet at 1", &dev, &slave);
if (ret)
goto fail;
diff --git a/cmd/sf.c b/cmd/sf.c
index 8bdebd9fd8..8713736b2a 100644
--- a/cmd/sf.c
+++ b/cmd/sf.c
@@ -91,6 +91,7 @@ static int do_spi_flash_probe(int argc, char *const argv[])
unsigned int speed = CONFIG_SF_DEFAULT_SPEED;
unsigned int mode = CONFIG_SF_DEFAULT_MODE;
char *endp;
+ bool use_dt = true;
#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
struct udevice *new, *bus_dev;
int ret;
@@ -117,11 +118,13 @@ static int do_spi_flash_probe(int argc, char *const argv[])
speed = simple_strtoul(argv[2], &endp, 0);
if (*argv[2] == 0 || *endp != 0)
return -1;
+ use_dt = false;
}
if (argc >= 4) {
mode = hextoul(argv[3], &endp);
if (*argv[3] == 0 || *endp != 0)
return -1;
+ use_dt = false;
}
#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
@@ -131,14 +134,18 @@ static int do_spi_flash_probe(int argc, char *const argv[])
device_remove(new, DM_REMOVE_NORMAL);
}
flash = NULL;
- ret = spi_flash_probe_bus_cs(bus, cs, speed, mode, &new);
- if (ret) {
+ if (use_dt) {
+ spi_flash_probe_bus_cs(bus, cs, &new);
+ flash = dev_get_uclass_priv(new);
+ } else {
+ flash = spi_flash_probe(bus, cs, speed, mode);
+ }
+
+ if (!flash) {
printf("Failed to initialize SPI flash at %u:%u (error %d)\n",
bus, cs, ret);
return 1;
}
-
- flash = dev_get_uclass_priv(new);
#else
if (flash)
spi_flash_free(flash);
diff --git a/cmd/spi.c b/cmd/spi.c
index 6dc32678da..454ebe37d7 100644
--- a/cmd/spi.c
+++ b/cmd/spi.c
@@ -46,8 +46,8 @@ static int do_spi_xfer(int bus, int cs)
str = strdup(name);
if (!str)
return -ENOMEM;
- ret = spi_get_bus_and_cs(bus, cs, freq, mode, "spi_generic_drv",
- str, &dev, &slave);
+ ret = _spi_get_bus_and_cs(bus, cs, freq, mode, "spi_generic_drv",
+ str, &dev, &slave);
if (ret)
return ret;
#else
diff --git a/drivers/mtd/spi/sf-uclass.c b/drivers/mtd/spi/sf-uclass.c
index 63d16291ff..4f186011e0 100644
--- a/drivers/mtd/spi/sf-uclass.c
+++ b/drivers/mtd/spi/sf-uclass.c
@@ -46,25 +46,12 @@ int spl_flash_get_sw_write_prot(struct udevice *dev)
* TODO(sjg at chromium.org): This is an old-style function. We should remove
* it when all SPI flash drivers use dm
*/
-struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+struct spi_flash *spi_flash_probe(unsigned int busnum, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode)
-{
- struct udevice *dev;
-
- if (spi_flash_probe_bus_cs(bus, cs, max_hz, spi_mode, &dev))
- return NULL;
-
- return dev_get_uclass_priv(dev);
-}
-
-int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
- unsigned int max_hz, unsigned int spi_mode,
- struct udevice **devp)
{
struct spi_slave *slave;
struct udevice *bus;
char *str;
- int ret;
#if defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(USE_TINY_PRINTF)
str = "spi_flash";
@@ -74,12 +61,27 @@ int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
snprintf(name, sizeof(name), "spi_flash@%d:%d", busnum, cs);
str = strdup(name);
#endif
- ret = spi_get_bus_and_cs(busnum, cs, max_hz, spi_mode,
- "jedec_spi_nor", str, &bus, &slave);
+
+ if (_spi_get_bus_and_cs(busnum, cs, max_hz, spi_mode,
+ "jedec_spi_nor", str, &bus, &slave))
+ return NULL;
+
+ return dev_get_uclass_priv(slave->dev);
+}
+
+int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
+ struct udevice **devp)
+{
+ struct spi_slave *slave;
+ struct udevice *bus;
+ int ret;
+
+ ret = spi_get_bus_and_cs(busnum, cs, &bus, &slave);
if (ret)
return ret;
*devp = slave->dev;
+
return 0;
}
diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c
index f825612640..d0b492b5a1 100644
--- a/drivers/net/fm/fm.c
+++ b/drivers/net/fm/fm.c
@@ -388,7 +388,7 @@ int fm_init_common(int index, struct ccsr_fman *reg)
/* speed and mode will be read from DT */
ret = spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS,
- CONFIG_SF_DEFAULT_CS, 0, 0, &new);
+ CONFIG_SF_DEFAULT_CS, &new);
ucode_flash = dev_get_uclass_priv(new);
#else
@@ -475,7 +475,7 @@ int fm_init_common(int index, struct ccsr_fman *reg)
/* speed and mode will be read from DT */
ret = spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
- 0, 0, &new);
+ &new);
ucode_flash = dev_get_uclass_priv(new);
#else
diff --git a/drivers/net/pfe_eth/pfe_firmware.c b/drivers/net/pfe_eth/pfe_firmware.c
index 6669048181..52142e1976 100644
--- a/drivers/net/pfe_eth/pfe_firmware.c
+++ b/drivers/net/pfe_eth/pfe_firmware.c
@@ -172,31 +172,20 @@ static int pfe_fit_check(void)
int pfe_spi_flash_init(void)
{
struct spi_flash *pfe_flash;
- struct udevice *new;
int ret = 0;
void *addr = malloc(CONFIG_SYS_LS_PFE_FW_LENGTH);
if (!addr)
return -ENOMEM;
- ret = spi_flash_probe_bus_cs(CONFIG_SYS_FSL_PFE_SPI_BUS,
+ pfe_flash = spi_flash_probe(CONFIG_SYS_FSL_PFE_SPI_BUS,
CONFIG_SYS_FSL_PFE_SPI_CS,
CONFIG_SYS_FSL_PFE_SPI_MAX_HZ,
- CONFIG_SYS_FSL_PFE_SPI_MODE,
- &new);
- if (ret) {
- printf("SF: failed to probe spi\n");
- free(addr);
- device_remove(new, DM_REMOVE_NORMAL);
- return ret;
- }
-
+ CONFIG_SYS_FSL_PFE_SPI_MODE);
- pfe_flash = dev_get_uclass_priv(new);
if (!pfe_flash) {
printf("SF: probe for pfe failed\n");
free(addr);
- device_remove(new, DM_REMOVE_NORMAL);
return -ENODEV;
}
diff --git a/drivers/net/sni_netsec.c b/drivers/net/sni_netsec.c
index 4901321d0c..c132e9bb32 100644
--- a/drivers/net/sni_netsec.c
+++ b/drivers/net/sni_netsec.c
@@ -621,12 +621,10 @@ static int netsec_stop_gmac(struct netsec_priv *priv)
static void netsec_spi_read(char *buf, loff_t len, loff_t offset)
{
- struct udevice *new;
struct spi_flash *flash;
- spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
- CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE, &new);
- flash = dev_get_uclass_priv(new);
+ flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
+ CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE);
spi_flash_read(flash, offset, len, buf);
}
diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
index f8ec312d71..b6cda6ef99 100644
--- a/drivers/spi/spi-uclass.c
+++ b/drivers/spi/spi-uclass.c
@@ -340,9 +340,65 @@ int spi_find_bus_and_cs(int busnum, int cs, struct udevice **busp,
return ret;
}
-int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
- const char *drv_name, const char *dev_name,
- struct udevice **busp, struct spi_slave **devp)
+int spi_get_bus_and_cs(int busnum, int cs, struct udevice **busp,
+ struct spi_slave **devp)
+{
+ struct udevice *bus, *dev;
+ struct dm_spi_bus *bus_data;
+ struct spi_slave *slave;
+ int ret;
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+ ret = uclass_first_device_err(UCLASS_SPI, &bus);
+#else
+ ret = uclass_get_device_by_seq(UCLASS_SPI, busnum, &bus);
+#endif
+ if (ret) {
+ log_err("Invalid bus %d (err=%d)\n", busnum, ret);
+ return ret;
+ }
+ ret = spi_find_chip_select(bus, cs, &dev);
+ if (ret) {
+ dev_err(bus, "Invalid chip select %d:%d (err=%d)\n", busnum, cs, ret);
+ return ret;
+ }
+
+ if (!device_active(dev)) {
+ struct spi_slave *slave;
+
+ ret = device_probe(dev);
+ if (ret)
+ goto err;
+ slave = dev_get_parent_priv(dev);
+ slave->dev = dev;
+ }
+
+ slave = dev_get_parent_priv(dev);
+ bus_data = dev_get_uclass_priv(bus);
+
+ /*
+ * In case the operation speed is not yet established by
+ * dm_spi_claim_bus() ensure the bus is configured properly.
+ */
+ if (!bus_data->speed) {
+ ret = spi_claim_bus(slave);
+ if (ret)
+ goto err;
+ }
+ *busp = bus;
+ *devp = slave;
+
+ return 0;
+
+err:
+ log_debug("%s: Error path, device '%s'\n", __func__, dev->name);
+
+ return ret;
+}
+
+int _spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
+ const char *drv_name, const char *dev_name,
+ struct udevice **busp, struct spi_slave **devp)
{
struct udevice *bus, *dev;
struct dm_spi_slave_plat *plat;
@@ -453,8 +509,7 @@ struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs,
struct udevice *dev;
int ret;
- ret = spi_get_bus_and_cs(busnum, cs, speed, mode, NULL, 0, &dev,
- &slave);
+ ret = spi_get_bus_and_cs(busnum, cs, &dev, &slave);
if (ret)
return NULL;
diff --git a/drivers/usb/gadget/max3420_udc.c b/drivers/usb/gadget/max3420_udc.c
index a16095f892..fa655c98dc 100644
--- a/drivers/usb/gadget/max3420_udc.c
+++ b/drivers/usb/gadget/max3420_udc.c
@@ -830,8 +830,8 @@ static int max3420_udc_probe(struct udevice *dev)
cs = slave_pdata->cs;
speed = slave_pdata->max_hz;
mode = slave_pdata->mode;
- spi_get_bus_and_cs(busnum, cs, speed, mode, "spi_generic_drv",
- NULL, &spid, &udc->slave);
+ _spi_get_bus_and_cs(busnum, cs, speed, mode, false, "spi_generic_drv",
+ NULL, &spid, &udc->slave);
udc->dev = dev;
udc->gadget.ep0 = &udc->ep[0].ep_usb;
diff --git a/env/sf.c b/env/sf.c
index 6a4bb756f0..3467097345 100644
--- a/env/sf.c
+++ b/env/sf.c
@@ -52,7 +52,6 @@ static int setup_flash_device(struct spi_flash **env_flash)
/* speed and mode will be read from DT */
ret = spi_flash_probe_bus_cs(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
- CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE,
&new);
if (ret) {
env_set_default("spi_flash_probe_bus_cs() failed", 0);
diff --git a/include/spi.h b/include/spi.h
index fa9ab12dbe..9a8c1fb260 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -572,6 +572,23 @@ int spi_find_bus_and_cs(int busnum, int cs, struct udevice **busp,
* Given a bus number and chip select, this finds the corresponding bus
* device and slave device.
*
+ * @busnum: SPI bus number
+ * @cs: Chip select to look for
+ * @busp: Returns bus device
+ * @devp: Return slave device
+ * @return 0 if found, -ve on error
+ */
+int spi_get_bus_and_cs(int busnum, int cs,
+ struct udevice **busp, struct spi_slave **devp);
+
+/**
+ * _spi_get_bus_and_cs() - Find and activate bus and slave devices by number
+ * As spi_flash_probe(), This is an old-style function. We should remove
+ * it when all SPI flash drivers use dm
+ *
+ * Given a bus number and chip select, this finds the corresponding bus
+ * device and slave device.
+ *
* If no such slave exists, and drv_name is not NULL, then a new slave device
* is automatically bound on this chip select with requested speed and mode.
*
@@ -588,7 +605,7 @@ int spi_find_bus_and_cs(int busnum, int cs, struct udevice **busp,
* @devp: Return slave device
* Return: 0 if found, -ve on error
*/
-int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
+int _spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
const char *drv_name, const char *dev_name,
struct udevice **busp, struct spi_slave **devp);
diff --git a/include/spi_flash.h b/include/spi_flash.h
index d33d0dd46a..10d19fd4b1 100644
--- a/include/spi_flash.h
+++ b/include/spi_flash.h
@@ -102,7 +102,6 @@ int spl_flash_get_sw_write_prot(struct udevice *dev);
int spi_flash_std_probe(struct udevice *dev);
int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
- unsigned int max_hz, unsigned int spi_mode,
struct udevice **devp);
/* Compatibility function - this is the old U-Boot API */
diff --git a/test/dm/spi.c b/test/dm/spi.c
index ee4ad3abaa..cf14b6c900 100644
--- a/test/dm/spi.c
+++ b/test/dm/spi.c
@@ -46,8 +46,7 @@ static int dm_test_spi_find(struct unit_test_state *uts)
/* This finds nothing because we removed the device */
ut_asserteq(-ENODEV, spi_find_bus_and_cs(busnum, cs, &bus, &dev));
- ut_asserteq(-ENODEV, spi_get_bus_and_cs(busnum, cs, speed, mode,
- NULL, 0, &bus, &slave));
+ ut_asserteq(-ENODEV, spi_get_bus_and_cs(busnum, cs, &bus, &slave));
/*
* This forces the device to be re-added, but there is no emulation
@@ -56,9 +55,9 @@ static int dm_test_spi_find(struct unit_test_state *uts)
* a 'partially-inited' device.
*/
ut_asserteq(-ENODEV, spi_find_bus_and_cs(busnum, cs, &bus, &dev));
- ut_asserteq(-ENOENT, spi_get_bus_and_cs(busnum, cs, speed, mode,
- "jedec_spi_nor", "name", &bus,
- &slave));
+ ut_asserteq(-ENOENT, _spi_get_bus_and_cs(busnum, cs, speed, mode,
+ "jedec_spi_nor", "name", &bus,
+ &slave));
sandbox_sf_unbind_emul(state_get_current(), busnum, cs);
ut_assertok(spi_cs_info(bus, cs, &info));
ut_asserteq_ptr(NULL, info.dev);
@@ -67,8 +66,8 @@ static int dm_test_spi_find(struct unit_test_state *uts)
ut_assertok(sandbox_sf_bind_emul(state, busnum, cs, bus, node,
"name"));
ut_assertok(spi_find_bus_and_cs(busnum, cs, &bus, &dev));
- ut_assertok(spi_get_bus_and_cs(busnum, cs, speed, mode,
- "jedec_spi_nor", "name", &bus, &slave));
+ ut_assertok(_spi_get_bus_and_cs(busnum, cs, speed, mode,
+ "jedec_spi_nor", "name", &bus, &slave));
ut_assertok(spi_cs_info(bus, cs, &info));
ut_asserteq_ptr(info.dev, slave->dev);
@@ -76,8 +75,9 @@ static int dm_test_spi_find(struct unit_test_state *uts)
/* We should be able to add something to another chip select */
ut_assertok(sandbox_sf_bind_emul(state, busnum, cs_b, bus, node,
"name"));
- ut_asserteq(-EINVAL, spi_get_bus_and_cs(busnum, cs_b, speed, mode,
- "jedec_spi_nor", "name", &bus, &slave));
+ ut_asserteq(-EINVAL, _spi_get_bus_and_cs(busnum, cs_b, speed, mode,
+ "jedec_spi_nor", "name",
+ &bus, &slave));
ut_asserteq(-EINVAL, spi_cs_info(bus, cs_b, &info));
ut_asserteq_ptr(NULL, info.dev);
@@ -142,14 +142,13 @@ static int dm_test_spi_claim_bus(struct unit_test_state *uts)
struct udevice *bus;
struct spi_slave *slave_a, *slave_b;
struct dm_spi_slave_plat *slave_plat;
- const int busnum = 0, cs_a = 0, cs_b = 1, mode = 0;
+ const int busnum = 0, cs_a = 0, cs_b = 1;
/* Get spi slave on CS0 */
- ut_assertok(spi_get_bus_and_cs(busnum, cs_a, 1000000, mode, NULL, 0,
- &bus, &slave_a));
+ ut_assertok(spi_get_bus_and_cs(busnum, cs_a, &bus, &slave_a));
+
/* Get spi slave on CS1 */
- ut_assertok(spi_get_bus_and_cs(busnum, cs_b, 1000000, mode, NULL, 0,
- &bus, &slave_b));
+ ut_assertok(spi_get_bus_and_cs(busnum, cs_b, &bus, &slave_b));
/* Different max_hz, different mode. */
ut_assert(slave_a->max_hz != slave_b->max_hz);
@@ -178,12 +177,11 @@ static int dm_test_spi_xfer(struct unit_test_state *uts)
{
struct spi_slave *slave;
struct udevice *bus;
- const int busnum = 0, cs = 0, mode = 0;
+ const int busnum = 0, cs = 0;
const char dout[5] = {0x9f};
unsigned char din[5];
- ut_assertok(spi_get_bus_and_cs(busnum, cs, 1000000, mode, NULL, 0,
- &bus, &slave));
+ ut_assertok(spi_get_bus_and_cs(busnum, cs, &bus, &slave));
ut_assertok(spi_claim_bus(slave));
ut_assertok(spi_xfer(slave, 40, dout, din,
SPI_XFER_BEGIN | SPI_XFER_END));
--
2.17.1
More information about the U-Boot
mailing list