[PATCH v2 2/6] capsule: FMP: Populate the image descriptor array from platform data
Sughosh Ganu
sughosh.ganu at linaro.org
Sat Mar 26 07:00:08 CET 2022
Currently, the image descriptor array that has been passed to the
GetImageInfo function of the Firmware Management Protocol(FMP) gets
populated through the data stored with the dfu framework. The
dfu data is not restricted to contain information only of the images
updatable through the capsule update mechanism, but it also contains
information on other images.
The image descriptor array is also parsed by the ESRT generation code,
and thus the ESRT table contains entries for other images that are not
being handled by the FMP for the capsule updates.
The other issue fixed is assignment of a separate GUID for all images
in the image descriptor array. The UEFI specification mandates that
all entries in the ESRT table should have a unique GUID value as part
of the FwClass member of the EFI_SYSTEM_RESOURCE_ENTRY. Currently, all
images are assigned a single GUID value, either an FIT GUID or a raw
image GUID. This is fixed by obtaining the GUID values from the
efi_fw_images array defined per platform.
Signed-off-by: Sughosh Ganu <sughosh.ganu at linaro.org>
---
Changes since V1: None
include/efi_loader.h | 3 ++
lib/efi_loader/efi_firmware.c | 91 +++++++++++------------------------
2 files changed, 30 insertions(+), 64 deletions(-)
diff --git a/include/efi_loader.h b/include/efi_loader.h
index 1965b5a28f..e8f7234230 100644
--- a/include/efi_loader.h
+++ b/include/efi_loader.h
@@ -994,6 +994,9 @@ struct efi_fw_images {
const u16 *fw_name;
};
+extern struct efi_fw_images fw_images[];
+extern u8 num_image_type_guids;
+
/**
* Install the ESRT system table.
*
diff --git a/lib/efi_loader/efi_firmware.c b/lib/efi_loader/efi_firmware.c
index a5ff32f121..13cb492092 100644
--- a/lib/efi_loader/efi_firmware.c
+++ b/lib/efi_loader/efi_firmware.c
@@ -97,91 +97,60 @@ efi_status_t EFIAPI efi_firmware_set_package_info_unsupported(
}
/**
- * efi_get_dfu_info - return information about the current firmware image
+ * efi_fill_image_desc_array - populate image descriptor array
* @this: Protocol instance
* @image_info_size: Size of @image_info
* @image_info: Image information
* @descriptor_version: Pointer to version number
- * @descriptor_count: Pointer to number of descriptors
+ * @descriptor_count: Image count
* @descriptor_size: Pointer to descriptor size
- * package_version: Package version
- * package_version_name: Package version's name
- * image_type: Image type GUID
+ * @package_version: Package version
+ * @package_version_name: Package version's name
*
* Return information bout the current firmware image in @image_info.
* @image_info will consist of a number of descriptors.
- * Each descriptor will be created based on "dfu_alt_info" variable.
+ * Each descriptor will be created based on "efi_fw_images" variable.
*
* Return status code
*/
-static efi_status_t efi_get_dfu_info(
+static efi_status_t efi_fill_image_desc_array(
efi_uintn_t *image_info_size,
struct efi_firmware_image_descriptor *image_info,
u32 *descriptor_version,
u8 *descriptor_count,
efi_uintn_t *descriptor_size,
u32 *package_version,
- u16 **package_version_name,
- const efi_guid_t *image_type)
+ u16 **package_version_name)
{
- struct dfu_entity *dfu;
size_t names_len, total_size;
- int dfu_num, i;
- u16 *name, *next;
- int ret;
-
- ret = dfu_init_env_entities(NULL, NULL);
- if (ret)
- return EFI_SUCCESS;
+ struct efi_fw_images *fw_array;
+ u8 image_count;
+ int i;
+ fw_array = &fw_images[0];
+ *descriptor_count = image_count = num_image_type_guids;
names_len = 0;
- dfu_num = 0;
- list_for_each_entry(dfu, &dfu_list, list) {
- names_len += (utf8_utf16_strlen(dfu->name) + 1) * 2;
- dfu_num++;
- }
- if (!dfu_num) {
- log_warning("No entities in dfu_alt_info\n");
- *image_info_size = 0;
- dfu_free_entities();
- return EFI_SUCCESS;
- }
+ total_size = sizeof(*image_info) * image_count;
- total_size = sizeof(*image_info) * dfu_num + names_len;
- /*
- * we will assume that sizeof(*image_info) * dfu_name
- * is, at least, a multiple of 2. So the start address for
- * image_id_name would be aligned with 2 bytes.
- */
if (*image_info_size < total_size) {
*image_info_size = total_size;
- dfu_free_entities();
return EFI_BUFFER_TOO_SMALL;
}
*image_info_size = total_size;
*descriptor_version = EFI_FIRMWARE_IMAGE_DESCRIPTOR_VERSION;
- *descriptor_count = dfu_num;
*descriptor_size = sizeof(*image_info);
*package_version = 0xffffffff; /* not supported */
*package_version_name = NULL; /* not supported */
- /* DFU alt number should correspond to image_index */
- i = 0;
- /* Name area starts just after descriptors */
- name = (u16 *)((u8 *)image_info + sizeof(*image_info) * dfu_num);
- next = name;
- list_for_each_entry(dfu, &dfu_list, list) {
- image_info[i].image_index = dfu->alt + 1;
- image_info[i].image_type_id = *image_type;
- image_info[i].image_id = dfu->alt;
-
- /* copy the DFU entity name */
- utf8_utf16_strcpy(&next, dfu->name);
- image_info[i].image_id_name = name;
- name = ++next;
+ for (i = 0; i < image_count; i++) {
+ image_info[i].image_index = i + 1;
+ image_info[i].image_type_id = fw_array[i].image_type_id;
+ image_info[i].image_id = i + 1;
+
+ image_info[i].image_id_name = (u16 *)fw_array[i].fw_name;
image_info[i].version = 0; /* not supported */
image_info[i].version_name = NULL; /* not supported */
@@ -202,12 +171,8 @@ static efi_status_t efi_get_dfu_info(
image_info[i].last_attempt_status = LAST_ATTEMPT_STATUS_SUCCESS;
image_info[i].hardware_instance = 1;
image_info[i].dependencies = NULL;
-
- i++;
}
- dfu_free_entities();
-
return EFI_SUCCESS;
}
@@ -267,11 +232,10 @@ efi_status_t EFIAPI efi_firmware_fit_get_image_info(
!descriptor_size || !package_version || !package_version_name))
return EFI_EXIT(EFI_INVALID_PARAMETER);
- ret = efi_get_dfu_info(image_info_size, image_info,
- descriptor_version, descriptor_count,
- descriptor_size,
- package_version, package_version_name,
- &efi_firmware_image_type_uboot_fit);
+ ret = efi_fill_image_desc_array(image_info_size, image_info,
+ descriptor_version, descriptor_count,
+ descriptor_size, package_version,
+ package_version_name);
return EFI_EXIT(ret);
}
@@ -376,11 +340,10 @@ efi_status_t EFIAPI efi_firmware_raw_get_image_info(
!descriptor_size || !package_version || !package_version_name))
return EFI_EXIT(EFI_INVALID_PARAMETER);
- ret = efi_get_dfu_info(image_info_size, image_info,
- descriptor_version, descriptor_count,
- descriptor_size,
- package_version, package_version_name,
- &efi_firmware_image_type_uboot_raw);
+ ret = efi_fill_image_desc_array(image_info_size, image_info,
+ descriptor_version, descriptor_count,
+ descriptor_size, package_version,
+ package_version_name);
return EFI_EXIT(ret);
}
--
2.25.1
More information about the U-Boot
mailing list