[PATCH v2 1/6] capsule: Add Image GUIDs for platforms using capsule updates
Michal Simek
michal.simek at xilinx.com
Mon Mar 28 11:08:44 CEST 2022
On 3/26/22 07:00, Sughosh Ganu wrote:
> Currently, all platforms that enable capsule updates do so using
> either EFI_FIRMWARE_IMAGE_TYPE_UBOOT_RAW_GUID or
> EFI_FIRMWARE_IMAGE_TYPE_UBOOT_FIT_GUID. This is based on the Firmware
> Management Protocol(FMP) instance used on the platform. However, this
> means that all platforms that enable a particular FMP instance have
> the same GUID value for all the updatable images, either the FIT image
> GUID or the raw image GUID, and that an image for some platform can be
> updated on any other platform which uses the same FMP instance. Another
> issue with this implementation is that the ESRT table shows the same
> GUID value for all images on the platform and also across platforms,
> which is not in compliance with the UEFI specification.
>
> Fix this by defining image GUID values and firmware names for
> individual images per platform. The GetImageInfo FMP hook would then
> populate these values in the image descriptor array.
>
> Signed-off-by: Sughosh Ganu <sughosh.ganu at linaro.org>
> ---
>
> Changes since V1:
> * Make changes for the xilinx boards as suggested by Michal Simek.
> * Add a GUID for the sandbox FIT image
>
> .../imx8mp_rsb3720a1/imx8mp_rsb3720a1.c | 19 ++++++++++++++
> .../imx8mm-cl-iot-gate/imx8mm-cl-iot-gate.c | 18 +++++++++++++
> board/emulation/qemu-arm/qemu-arm.c | 20 +++++++++++++++
> board/kontron/pitx_imx8m/pitx_imx8m.c | 15 ++++++++++-
> board/kontron/sl-mx8mm/sl-mx8mm.c | 14 +++++++++++
> board/kontron/sl28/sl28.c | 14 +++++++++++
> board/sandbox/sandbox.c | 25 +++++++++++++++++++
> board/socionext/developerbox/developerbox.c | 23 +++++++++++++++++
> board/xilinx/common/board.c | 18 +++++++++++++
> include/configs/imx8mm-cl-iot-gate.h | 10 ++++++++
> include/configs/imx8mp_rsb3720.h | 10 ++++++++
> include/configs/kontron-sl-mx8mm.h | 6 +++++
> include/configs/kontron_pitx_imx8m.h | 6 +++++
> include/configs/kontron_sl28.h | 6 +++++
> include/configs/qemu-arm.h | 10 ++++++++
> include/configs/sandbox.h | 14 +++++++++++
> include/configs/synquacer.h | 14 +++++++++++
> include/configs/xilinx_versal.h | 10 ++++++++
> include/configs/xilinx_zynqmp.h | 10 ++++++++
> include/configs/zynq-common.h | 10 ++++++++
> include/efi_loader.h | 15 +++++++++++
> 21 files changed, 286 insertions(+), 1 deletion(-)
>
> diff --git a/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c b/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c
> index 16566092bd..6b534660fe 100644
> --- a/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c
> +++ b/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c
> @@ -6,6 +6,8 @@
>
> #include <common.h>
> #include <dwc3-uboot.h>
> +#include <efi.h>
> +#include <efi_loader.h>
> #include <errno.h>
> #include <miiphy.h>
> #include <netdev.h>
> @@ -21,6 +23,7 @@
> #include <asm/arch/clock.h>
> #include <asm/mach-imx/dma.h>
> #include <linux/delay.h>
> +#include <linux/kernel.h>
> #include <power/pmic.h>
>
> DECLARE_GLOBAL_DATA_PTR;
> @@ -44,6 +47,22 @@ static void setup_gpmi_nand(void)
> }
> #endif
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +struct efi_fw_images fw_images[] = {
> + {
> +#if defined(CONFIG_TARGET_IMX8MP_RSB3720A1_4G)
> + .image_type_id = IMX8MP_RSB3720A1_4G_FIT_IMAGE_GUID,
> +#elif defined(CONFIG_TARGET_IMX8MP_RSB3720A1_6G)
> + .image_type_id = IMX8MP_RSB3720A1_6G_FIT_IMAGE_GUID,
> +#endif
> + .fw_name = u"IMX8MP-RSB3720-FIT"
> + },
> +};
> +
> +u8 num_image_type_guids = ARRAY_SIZE(fw_images);
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> +
> int board_early_init_f(void)
> {
> struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
> diff --git a/board/compulab/imx8mm-cl-iot-gate/imx8mm-cl-iot-gate.c b/board/compulab/imx8mm-cl-iot-gate/imx8mm-cl-iot-gate.c
> index 7e2d88f449..ec73d75db3 100644
> --- a/board/compulab/imx8mm-cl-iot-gate/imx8mm-cl-iot-gate.c
> +++ b/board/compulab/imx8mm-cl-iot-gate/imx8mm-cl-iot-gate.c
> @@ -5,6 +5,8 @@
> */
>
> #include <common.h>
> +#include <efi.h>
> +#include <efi_loader.h>
> #include <env.h>
> #include <extension_board.h>
> #include <hang.h>
> @@ -21,11 +23,27 @@
> #include <asm/mach-imx/gpio.h>
> #include <asm/mach-imx/mxc_i2c.h>
> #include <asm/sections.h>
> +#include <linux/kernel.h>
>
> #include "ddr/ddr.h"
>
> DECLARE_GLOBAL_DATA_PTR;
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +struct efi_fw_images fw_images[] = {
> + {
> +#if defined(CONFIG_TARGET_IMX8MM_CL_IOT_GATE)
> + .image_type_id = IMX8MM_CL_IOT_GATE_FIT_IMAGE_GUID,
> +#elif defined(CONFIG_TARGET_IMX8MM_CL_IOT_GATE_OPTEE)
> + .image_type_id = IMX8MM_CL_IOT_GATE_OPTEE_FIT_IMAGE_GUID,
> +#endif
> + .fw_name = u"IMX8MM-CL-IOT-GATE-FIT",
> + },
> +};
> +
> +u8 num_image_type_guids = ARRAY_SIZE(fw_images);
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> int board_phys_sdram_size(phys_size_t *size)
> {
> struct lpddr4_tcm_desc *lpddr4_tcm_desc =
> diff --git a/board/emulation/qemu-arm/qemu-arm.c b/board/emulation/qemu-arm/qemu-arm.c
> index 16d5a97167..99872ce0b8 100644
> --- a/board/emulation/qemu-arm/qemu-arm.c
> +++ b/board/emulation/qemu-arm/qemu-arm.c
> @@ -6,15 +6,35 @@
> #include <common.h>
> #include <cpu_func.h>
> #include <dm.h>
> +#include <efi.h>
> +#include <efi_loader.h>
> +#include <efi_loader.h>
> #include <fdtdec.h>
> #include <init.h>
> #include <log.h>
> #include <virtio_types.h>
> #include <virtio.h>
>
> +#include <linux/kernel.h>
> +
> #ifdef CONFIG_ARM64
> #include <asm/armv8/mmu.h>
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +struct efi_fw_images fw_images[] = {
> + {
> +#if defined(CONFIG_TARGET_QEMU_ARM_32BIT)
> + .image_type_id = QEMU_ARM_UBOOT_IMAGE_GUID,
> +#elif defined(CONFIG_TARGET_QEMU_ARM_64BIT)
> + .image_type_id = QEMU_ARM64_UBOOT_IMAGE_GUID,
> +#endif
> + .fw_name = u"Qemu-Arm-UBOOT",
> + },
> +};
> +
> +u8 num_image_type_guids = ARRAY_SIZE(fw_images);
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> static struct mm_region qemu_arm64_mem_map[] = {
> {
> /* Flash */
> diff --git a/board/kontron/pitx_imx8m/pitx_imx8m.c b/board/kontron/pitx_imx8m/pitx_imx8m.c
> index d655fe099b..c3af951b14 100644
> --- a/board/kontron/pitx_imx8m/pitx_imx8m.c
> +++ b/board/kontron/pitx_imx8m/pitx_imx8m.c
> @@ -2,6 +2,8 @@
>
> #include "pitx_misc.h"
> #include <common.h>
> +#include <efi.h>
> +#include <efi_loader.h>
> #include <init.h>
> #include <mmc.h>
> #include <miiphy.h>
> @@ -12,7 +14,7 @@
> #include <asm/mach-imx/gpio.h>
> #include <asm/mach-imx/iomux-v3.h>
> #include <linux/delay.h>
> -
> +#include <linux/kernel.h>
>
> DECLARE_GLOBAL_DATA_PTR;
>
> @@ -30,6 +32,17 @@ static iomux_v3_cfg_t const uart_pads[] = {
> IMX8MQ_PAD_ECSPI1_MISO__UART3_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
> };
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +struct efi_fw_images fw_images[] = {
> + {
> + .image_type_id = KONTRON_PITX_IMX8M_FIT_IMAGE_GUID,
> + .fw_name = u"KONTRON-PITX-IMX8M-UBOOT",
> + },
> +};
> +
> +u8 num_image_type_guids = ARRAY_SIZE(fw_images);
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> int board_early_init_f(void)
> {
> struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
> diff --git a/board/kontron/sl-mx8mm/sl-mx8mm.c b/board/kontron/sl-mx8mm/sl-mx8mm.c
> index 48376cb826..4d25618895 100644
> --- a/board/kontron/sl-mx8mm/sl-mx8mm.c
> +++ b/board/kontron/sl-mx8mm/sl-mx8mm.c
> @@ -6,12 +6,26 @@
> #include <asm/arch/imx-regs.h>
> #include <asm/global_data.h>
> #include <asm/io.h>
> +#include <efi.h>
> +#include <efi_loader.h>
> #include <fdt_support.h>
> #include <linux/errno.h>
> +#include <linux/kernel.h>
> #include <net.h>
>
> DECLARE_GLOBAL_DATA_PTR;
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +struct efi_fw_images fw_images[] = {
> + {
> + .image_type_id = KONTRON_SL_MX8MM_FIT_IMAGE_GUID,
> + .fw_name = u"KONTROL-SL-MX8MM-UBOOT",
> + },
> +};
> +
> +u8 num_image_type_guids = ARRAY_SIZE(fw_images);
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> int board_phys_sdram_size(phys_size_t *size)
> {
> u32 ddr_size = readl(M4_BOOTROM_BASE_ADDR);
> diff --git a/board/kontron/sl28/sl28.c b/board/kontron/sl28/sl28.c
> index 3c48a9141d..a4985df4ea 100644
> --- a/board/kontron/sl28/sl28.c
> +++ b/board/kontron/sl28/sl28.c
> @@ -3,11 +3,14 @@
> #include <common.h>
> #include <dm.h>
> #include <malloc.h>
> +#include <efi.h>
> +#include <efi_loader.h>
> #include <errno.h>
> #include <fsl_ddr.h>
> #include <fdt_support.h>
> #include <asm/global_data.h>
> #include <linux/libfdt.h>
> +#include <linux/kernel.h>
> #include <env_internal.h>
> #include <asm/arch-fsl-layerscape/soc.h>
> #include <asm/arch-fsl-layerscape/fsl_icid.h>
> @@ -23,6 +26,17 @@
>
> DECLARE_GLOBAL_DATA_PTR;
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +struct efi_fw_images fw_images[] = {
> + {
> + .image_type_id = KONTRON_SL28_FIT_IMAGE_GUID,
> + .fw_name = u"KONTRON-SL28-FIT",
> + },
> +};
> +
> +u8 num_image_type_guids = ARRAY_SIZE(fw_images);
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> int board_early_init_f(void)
> {
> fsl_lsch3_early_init_f();
> diff --git a/board/sandbox/sandbox.c b/board/sandbox/sandbox.c
> index 5d9a945d64..a82e7971e4 100644
> --- a/board/sandbox/sandbox.c
> +++ b/board/sandbox/sandbox.c
> @@ -7,6 +7,8 @@
> #include <cpu_func.h>
> #include <cros_ec.h>
> #include <dm.h>
> +#include <efi.h>
> +#include <efi_loader.h>
> #include <env_internal.h>
> #include <init.h>
> #include <led.h>
> @@ -14,6 +16,7 @@
> #include <asm/global_data.h>
> #include <asm/test.h>
> #include <asm/u-boot-sandbox.h>
> +#include <linux/kernel.h>
> #include <malloc.h>
>
> #include <extension_board.h>
> @@ -25,6 +28,28 @@
> */
> gd_t *gd;
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +struct efi_fw_images fw_images[] = {
> +#if defined(CONFIG_EFI_CAPSULE_FIRMWARE_RAW)
> + {
> + .image_type_id = SANDBOX_UBOOT_IMAGE_GUID,
> + .fw_name = u"SANDBOX-UBOOT",
> + },
> + {
> + .image_type_id = SANDBOX_UBOOT_ENV_IMAGE_GUID,
> + .fw_name = u"SANDBOX-UBOOT-ENV",
> + },
> +#elif defined(CONFIG_EFI_CAPSULE_FIRMWARE_FIT)
> + {
> + .image_type_id = SANDBOX_FIT_IMAGE_GUID,
> + .fw_name = u"SANDBOX-FIT",
> + },
> +#endif
> +};
> +
> +u8 num_image_type_guids = ARRAY_SIZE(fw_images);
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> #if !CONFIG_IS_ENABLED(OF_PLATDATA)
> /*
> * Add a simple GPIO device (don't use with of-platdata as it interferes with
> diff --git a/board/socionext/developerbox/developerbox.c b/board/socionext/developerbox/developerbox.c
> index 9552bfcdc3..4df26f4019 100644
> --- a/board/socionext/developerbox/developerbox.c
> +++ b/board/socionext/developerbox/developerbox.c
> @@ -10,10 +10,33 @@
> #include <asm/global_data.h>
> #include <asm/io.h>
> #include <common.h>
> +#include <efi.h>
> +#include <efi_loader.h>
> #include <env_internal.h>
> #include <fdt_support.h>
> #include <log.h>
>
> +#include <linux/kernel.h>
> +
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +struct efi_fw_images fw_images[] = {
> + {
> + .image_type_id = DEVELOPERBOX_UBOOT_IMAGE_GUID,
> + .fw_name = u"DEVELOPERBOX-UBOOT",
> + },
> + {
> + .image_type_id = DEVELOPERBOX_FIP_IMAGE_GUID,
> + .fw_name = u"DEVELOPERBOX-FIP",
> + },
> + {
> + .image_type_id = DEVELOPERBOX_OPTEE_IMAGE_GUID,
> + .fw_name = u"DEVELOPERBOX-OPTEE",
> + },
> +};
> +
> +u8 num_image_type_guids = ARRAY_SIZE(fw_images);
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> static struct mm_region sc2a11_mem_map[] = {
> {
> .virt = 0x0UL,
> diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
> index 0068cb8792..4ff0baf711 100644
> --- a/board/xilinx/common/board.c
> +++ b/board/xilinx/common/board.c
> @@ -5,6 +5,8 @@
> */
>
> #include <common.h>
> +#include <efi.h>
> +#include <efi_loader.h>
> #include <env.h>
> #include <log.h>
> #include <asm/global_data.h>
> @@ -20,9 +22,25 @@
> #include <generated/dt.h>
> #include <soc.h>
> #include <linux/ctype.h>
> +#include <linux/kernel.h>
>
> #include "fru.h"
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +struct efi_fw_images fw_images[] = {
#if defined(XILINX_BOOT_IMAGE_GUID)
> + {
> + .image_type_id = XILINX_BOOT_IMAGE_GUID,
> + .fw_name = u"XILINX-BOOT",
> + },
#endif
#if defined(XILINX_UBOOT_IMAGE_GUID)
> + {
> + .image_type_id = XILINX_UBOOT_IMAGE_GUID,
> + .fw_name = u"XILINX-UBOOT",
> + },
#endif
> +};
> +
> +u8 num_image_type_guids = ARRAY_SIZE(fw_images);
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> #if defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET)
> int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
> {
> diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h
> index 7e6be6050c..35df2e755e 100644
> --- a/include/configs/imx8mm-cl-iot-gate.h
> +++ b/include/configs/imx8mm-cl-iot-gate.h
> @@ -31,6 +31,16 @@
>
> #endif
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +#define IMX8MM_CL_IOT_GATE_FIT_IMAGE_GUID \
> + EFI_GUID(0x7a32a939, 0xab92, 0x467b, 0x91, 0x52, \
> + 0x74, 0x77, 0x1b, 0x95, 0xe6, 0x46)
> +
> +#define IMX8MM_CL_IOT_GATE_OPTEE_FIT_IMAGE_GUID \
> + EFI_GUID(0x0bf1165c, 0x1831, 0x4864, 0x94, 0x5e, \
> + 0xac, 0x3d, 0x38, 0x48, 0xf4, 0x99)
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> #if CONFIG_IS_ENABLED(CMD_MMC)
> # define BOOT_TARGET_MMC(func) \
> func(MMC, mmc, 2) \
> diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h
> index ac4a7d0cb3..a5a845c2da 100644
> --- a/include/configs/imx8mp_rsb3720.h
> +++ b/include/configs/imx8mp_rsb3720.h
> @@ -21,6 +21,16 @@
> #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
> #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +#define IMX8MP_RSB3720A1_4G_FIT_IMAGE_GUID \
> + EFI_GUID(0xb1251e89, 0x384a, 0x4635, 0xa8, 0x06, \
> + 0x3a, 0xa0, 0xb0, 0xe9, 0xf9, 0x65)
> +
> +#define IMX8MP_RSB3720A1_6G_FIT_IMAGE_GUID \
> + EFI_GUID(0xb5fb6f08, 0xe142, 0x4db1, 0x97, 0xea, \
> + 0x5f, 0xd3, 0x6b, 0x9b, 0xe5, 0xb9)
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT*/
> +
> #ifdef CONFIG_SPL_BUILD
> #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
> #define CONFIG_SPL_STACK 0x960000
> diff --git a/include/configs/kontron-sl-mx8mm.h b/include/configs/kontron-sl-mx8mm.h
> index 788ae77cd3..aff1b90010 100644
> --- a/include/configs/kontron-sl-mx8mm.h
> +++ b/include/configs/kontron-sl-mx8mm.h
> @@ -38,6 +38,12 @@
> #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
> #endif
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +#define KONTRON_SL_MX8MM_FIT_IMAGE_GUID \
> + EFI_GUID(0xd488e45a, 0x4929, 0x4b55, 0x8c, 0x14, \
> + 0x86, 0xce, 0xa2, 0xcd, 0x66, 0x29)
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> #ifndef CONFIG_SPL_BUILD
> #define BOOT_TARGET_DEVICES(func) \
> func(MMC, mmc, 1) \
> diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h
> index 0f96b905ab..678364e367 100644
> --- a/include/configs/kontron_pitx_imx8m.h
> +++ b/include/configs/kontron_pitx_imx8m.h
> @@ -14,6 +14,12 @@
> #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
> #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +#define KONTRON_PITX_IMX8M_FIT_IMAGE_GUID \
> + EFI_GUID(0xc898e959, 0x5b1f, 0x4e6d, 0x88, 0xe0, \
> + 0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99)
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> #ifdef CONFIG_SPL_BUILD
> #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
> #define CONFIG_SPL_STACK 0x187FF0
> diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h
> index 448749a7f8..97d0d365f6 100644
> --- a/include/configs/kontron_sl28.h
> +++ b/include/configs/kontron_sl28.h
> @@ -57,6 +57,12 @@
> #define CONFIG_SYS_SPL_MALLOC_START 0x80200000
> #define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +#define KONTRON_SL28_FIT_IMAGE_GUID \
> + EFI_GUID(0x86ebd44f, 0xfeb8, 0x466f, 0x8b, 0xb8, \
> + 0x89, 0x06, 0x18, 0x45, 0x6d, 0x8b)
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> /* environment */
> /* see include/configs/ti_armv7_common.h */
> #define ENV_MEM_LAYOUT_SETTINGS \
> diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h
> index d45f606860..2f2abc746d 100644
> --- a/include/configs/qemu-arm.h
> +++ b/include/configs/qemu-arm.h
> @@ -17,6 +17,16 @@
>
> #define CONFIG_SYS_BOOTM_LEN SZ_64M
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +#define QEMU_ARM_UBOOT_IMAGE_GUID \
> + EFI_GUID(0xf885b085, 0x99f8, 0x45af, 0x84, 0x7d, \
> + 0xd5, 0x14, 0x10, 0x7a, 0x4a, 0x2c)
> +
> +#define QEMU_ARM64_UBOOT_IMAGE_GUID \
> + EFI_GUID(0x058b7d83, 0x50d5, 0x4c47, 0xa1, 0x95, \
> + 0x60, 0xd8, 0x6a, 0xd3, 0x41, 0xc4)
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> /* For timer, QEMU emulates an ARMv7/ARMv8 architected timer */
>
> /* Environment options */
> diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
> index 75efbf3448..e951d08056 100644
> --- a/include/configs/sandbox.h
> +++ b/include/configs/sandbox.h
> @@ -14,6 +14,20 @@
>
> #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +#define SANDBOX_UBOOT_IMAGE_GUID \
> + EFI_GUID(0x09d7cf52, 0x0720, 0x4710, 0x91, 0xd1, \
> + 0x08, 0x46, 0x9b, 0x7f, 0xe9, 0xc8)
> +
> +#define SANDBOX_UBOOT_ENV_IMAGE_GUID \
> + EFI_GUID(0x5a7021f5, 0xfef2, 0x48b4, 0xaa, 0xba, \
> + 0x83, 0x2e, 0x77, 0x74, 0x18, 0xc0)
> +
> +#define SANDBOX_FIT_IMAGE_GUID \
> + EFI_GUID(0x3673b45d, 0x6a7c, 0x46f3, 0x9e, 0x60, \
> + 0xad, 0xab, 0xb0, 0x3f, 0x79, 0x37)
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> /* Size of our emulated memory */
> #define SB_CONCAT(x, y) x ## y
> #define SB_TO_UL(s) SB_CONCAT(s, UL)
> diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h
> index 8dd092fc59..07e1f56e3d 100644
> --- a/include/configs/synquacer.h
> +++ b/include/configs/synquacer.h
> @@ -51,6 +51,20 @@
> "fip.bin raw 180000 78000;" \
> "optee.bin raw 500000 100000\0"
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +#define DEVELOPERBOX_UBOOT_IMAGE_GUID \
> + EFI_GUID(0x53a92e83, 0x4ef4, 0x473a, 0x8b, 0x0d, \
> + 0xb5, 0xd8, 0xc7, 0xb2, 0xd6, 0x00)
> +
> +#define DEVELOPERBOX_FIP_IMAGE_GUID \
> + EFI_GUID(0x880866e9, 0x84ba, 0x4793, 0xa9, 0x08, \
> + 0x33, 0xe0, 0xb9, 0x16, 0xf3, 0x98)
> +
> +#define DEVELOPERBOX_OPTEE_IMAGE_GUID \
> + EFI_GUID(0xc1b629f1, 0xce0e, 0x4894, 0x82, 0xbf, \
> + 0xf0, 0xa3, 0x83, 0x87, 0xe6, 0x30)
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
> /* Distro boot settings */
> #ifndef CONFIG_SPL_BUILD
> #ifdef CONFIG_CMD_USB
> diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h
> index bc72f5f35f..b203918973 100644
> --- a/include/configs/xilinx_versal.h
> +++ b/include/configs/xilinx_versal.h
> @@ -31,6 +31,16 @@
> #define CONFIG_BOOTP_BOOTFILESIZE
> #define CONFIG_BOOTP_MAY_FAIL
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +#define XILINX_BOOT_IMAGE_GUID \
> + EFI_GUID(0x20c5fba5, 0x0171, 0x457f, 0xb9, 0xcd, \
> + 0xf5, 0x12, 0x9c, 0xd0, 0x72, 0x28)
> +
> +#define XILINX_UBOOT_IMAGE_GUID \
> + EFI_GUID(0x5965bf3f, 0xd7d4, 0x49b7, 0xb4, 0x24, \
> + 0x9f, 0x31, 0xe7, 0x51, 0xd8, 0x95)
Please remove this uboot macro. Versal doesn't use SPL that's why only BOOT guid
is enought.
Thanks,
Michal
More information about the U-Boot
mailing list