[PATCH v3 1/4] arm: mvebu: dts: uDPU: update DTS

Robert Marko robert.marko at sartura.hr
Thu Mar 24 10:57:36 CET 2022


Update the uDPU DTS to the version that is pending upstream [1][2].

[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220322105857.1107016-1-robert.marko@sartura.hr/
[2] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220322105857.1107016-2-robert.marko@sartura.hr/

Signed-off-by: Robert Marko <robert.marko at sartura.hr>
---
 arch/arm/dts/armada-3720-uDPU.dts | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts
index 95d46e8d08..1f534c0c65 100644
--- a/arch/arm/dts/armada-3720-uDPU.dts
+++ b/arch/arm/dts/armada-3720-uDPU.dts
@@ -99,7 +99,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi_quad_pins>;
 
-	m25p80 at 0 {
+	spi-flash at 0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <54000000>;
@@ -108,10 +108,15 @@
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			/* only bootloader is located on the SPI */
+
 			partition at 0 {
-				label = "uboot";
-				reg = <0 0x400000>;
+				label = "firmware";
+				reg = <0x0 0x180000>;
+			};
+
+			partition at 180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x10000>;
 			};
 		};
 	};
@@ -148,15 +153,15 @@
 	scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
-	lm75 at 48 {
+	nct375 at 48 {
 		status = "okay";
-		compatible = "lm75";
+		compatible = "ti,tmp75c";
 		reg = <0x48>;
 	};
 
-	lm75 at 49 {
+	nct375 at 49 {
 		status = "okay";
-		compatible = "lm75";
+		compatible = "ti,tmp75c";
 		reg = <0x49>;
 	};
 };
-- 
2.35.1



More information about the U-Boot mailing list