[PATCH 13/25] spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to Kconfig

[Tom Rini]

On Thu, Mar 31, 2022 at 10:00:52PM +0530, Pratyush Yadav wrote:
> +Vignesh
> 
> Hi Tom,
> 
> On 30/03/22 06:07PM, Tom Rini wrote:
> > This is a little tricky since SoCFPGA has code to determine this as
> > runtime.  Introduce a guard variable for platforms to select if they
> > have a static value to use.  Then for ARCH_SOCFPGA, call
> > cm_get_qspi_controller_clk_hz() and otherwise continue the previous
> > behavior.
> > 
> > Cc: Jagan Teki <jagan at amarulasolutions.com>
> > Signed-off-by: Tom Rini <trini at konsulko.com>
> > ---
> >  arch/arm/mach-socfpga/misc_soc64.c     | 1 +
> >  configs/j7200_evm_a72_defconfig        | 2 ++
> >  configs/j7200_evm_r5_defconfig         | 2 ++
> >  configs/j721e_evm_a72_defconfig        | 2 ++
> >  configs/j721e_evm_r5_defconfig         | 2 ++
> >  configs/j721e_hs_evm_a72_defconfig     | 2 ++
> >  configs/j721e_hs_evm_r5_defconfig      | 2 ++
> >  configs/j721s2_evm_a72_defconfig       | 2 ++
> >  configs/j721s2_evm_r5_defconfig        | 2 ++
> >  configs/k2g_evm_defconfig              | 2 ++
> >  configs/k2g_hs_evm_defconfig           | 2 ++
> >  configs/stv0991_defconfig              | 2 ++
> >  drivers/spi/Kconfig                    | 8 ++++++++
> >  drivers/spi/cadence_qspi.c             | 4 +++-
> >  drivers/spi/cadence_qspi.h             | 1 +
> >  include/configs/j721e_evm.h            | 1 -
> >  include/configs/j721s2_evm.h           | 1 -
> >  include/configs/k2g_evm.h              | 4 ----
> >  include/configs/socfpga_common.h       | 9 ---------
> >  include/configs/socfpga_soc64_common.h | 5 -----
> >  include/configs/stv0991.h              | 8 --------
> >  21 files changed, 35 insertions(+), 29 deletions(-)
> > 
> > diff --git a/arch/arm/mach-socfpga/misc_soc64.c b/arch/arm/mach-socfpga/misc_soc64.c
> > index 7b973a79e807..2acdfad07b35 100644
> > --- a/arch/arm/mach-socfpga/misc_soc64.c
> > +++ b/arch/arm/mach-socfpga/misc_soc64.c
> > @@ -16,6 +16,7 @@
> >  #include <errno.h>
> >  #include <init.h>
> >  #include <log.h>
> > +#include <mach/clock_manager.h>
> >  
> >  DECLARE_GLOBAL_DATA_PTR;
> >  
> > diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig
> > index eb1d7d46b82a..3d0d1977ff99 100644
> > --- a/configs/j7200_evm_a72_defconfig
> > +++ b/configs/j7200_evm_a72_defconfig
> > @@ -173,6 +173,8 @@ CONFIG_SOC_TI=y
> >  CONFIG_SPI=y
> >  CONFIG_DM_SPI=y
> >  CONFIG_CADENCE_QSPI=y
> > +CONFIG_HAS_CQSPI_REF_CLK=y
> > +CONFIG_CQSPI_REF_CLK=133333333
> >  CONFIG_SYSRESET=y
> >  CONFIG_SPL_SYSRESET=y
> >  CONFIG_SYSRESET_TI_SCI=y
> > diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig
> > index e500a27bb692..0f4b006b80b5 100644
> > --- a/configs/j7200_evm_r5_defconfig
> > +++ b/configs/j7200_evm_r5_defconfig
> > @@ -134,6 +134,8 @@ CONFIG_SOC_TI=y
> >  CONFIG_SPI=y
> >  CONFIG_DM_SPI=y
> >  CONFIG_CADENCE_QSPI=y
> > +CONFIG_HAS_CQSPI_REF_CLK=y
> > +CONFIG_CQSPI_REF_CLK=133333333
> 
> This clock is configured to 166 MHz via device tree. I would prefer TI 
> platforms to use device tree and not set CONFIG_HAS_CQSPI_REF_CLK at 
> all. The clock _is_ 133 MHz by default but I think it is better if we 
> just return an error when clk_get fails.

For these migration patches, it's important to not include functional
changes as the same time in case there's problems later on (see for
example the SYS_IMMR fix I merged today).  So please send a follow-up to
this patch or something vs master to disable the current behavior on the
TI platforms.

> >  CONFIG_SYSRESET=y
> >  CONFIG_SPL_SYSRESET=y
> >  CONFIG_SYSRESET_TI_SCI=y
> [...]
> > diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
> > index db680618ee9b..7209bb43a776 100644
> > --- a/drivers/spi/cadence_qspi.c
> > +++ b/drivers/spi/cadence_qspi.c
> > @@ -188,8 +188,10 @@ static int cadence_spi_probe(struct udevice *bus)
> >  	if (plat->ref_clk_hz == 0) {
> >  		ret = clk_get_by_index(bus, 0, &clk);
> >  		if (ret) {
> > -#ifdef CONFIG_CQSPI_REF_CLK
> > +#ifdef CONFIG_HAS_CQSPI_REF_CLK
> >  			plat->ref_clk_hz = CONFIG_CQSPI_REF_CLK;
> > +#elif defined(CONFIG_ARCH_SOCFPGA)
> > +			plat->ref_clk_hz = cm_get_qspi_controller_clk_hz();
> 
> While you are here, please change all this to use if (IS_ENABLED()) 
> instead.

In this case IS_ENABLED() does not increase readibity of the code nor
increase static code coverage testing.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20220331/81ee77a0/attachment.sig>