[PATCH v5 0/4] add TCB driver for sama5d2

[Clément Léger]

When booting under OP-TEE, the SYSC is secured which means the PIT is
also not accessible by non-secure world. The TCB 0 however is always
available for non-secure world and thus can be used.
This series add a TCB driver and enables it in sama5d2 configs.

---
Changes in v5:
- Fixed missing include in .dts file for IRQ defines
- Add aic interrupt controller node to avoid DTC warnings

Changes in v4:
- Add missing interrupts property to tcb node

Changes in v3:
- Remove useless defines
- Add printf in case of unsupported timers specified in device-tree
- Add "syscon" compatible to tcb node

Changes in v2:
- Reworked driver to use existing Linux bindings

Clément Léger (4):
  timer: atmel_tcb_timer: add atmel_tcb driver
  ARM: dts: at91: sama5d2: add AIC node
  ARM: dts: at91: sama5d2: add TCB node
  configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER

 MAINTAINERS                                  |   1 +
 arch/arm/dts/sama5d2.dtsi                    |  27 ++++
 configs/sama5d2_icp_mmc_defconfig            |   1 +
 configs/sama5d2_ptc_ek_mmc_defconfig         |   1 +
 configs/sama5d2_ptc_ek_nandflash_defconfig   |   1 +
 configs/sama5d2_xplained_emmc_defconfig      |   1 +
 configs/sama5d2_xplained_mmc_defconfig       |   1 +
 configs/sama5d2_xplained_qspiflash_defconfig |   1 +
 configs/sama5d2_xplained_spiflash_defconfig  |   1 +
 drivers/timer/Kconfig                        |   8 +
 drivers/timer/Makefile                       |   1 +
 drivers/timer/atmel_tcb_timer.c              | 155 +++++++++++++++++++
 12 files changed, 199 insertions(+)
 create mode 100644 drivers/timer/atmel_tcb_timer.c

-- 
2.34.1