[PATCH 10/10] arm: Remove unused ep93xx code
Tom Rini
trini at konsulko.com
Thu Mar 31 19:46:53 CEST 2022
There are no platforms for this architecture anymore, remove unused
code.
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/arm/cpu/arm920t/Makefile | 1 -
arch/arm/cpu/arm920t/ep93xx/Makefile | 19 -
arch/arm/cpu/arm920t/ep93xx/cpu.c | 37 --
arch/arm/cpu/arm920t/ep93xx/led.c | 85 ---
arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S | 457 --------------
arch/arm/cpu/arm920t/ep93xx/speed.c | 96 ---
arch/arm/cpu/arm920t/ep93xx/timer.c | 117 ----
arch/arm/include/asm/arch-ep93xx/ep93xx.h | 666 --------------------
drivers/net/Makefile | 1 -
drivers/net/ep93xx_eth.c | 654 -------------------
drivers/net/ep93xx_eth.h | 126 ----
drivers/usb/host/Makefile | 1 -
drivers/usb/host/ohci-ep93xx.c | 37 --
13 files changed, 2297 deletions(-)
delete mode 100644 arch/arm/cpu/arm920t/ep93xx/Makefile
delete mode 100644 arch/arm/cpu/arm920t/ep93xx/cpu.c
delete mode 100644 arch/arm/cpu/arm920t/ep93xx/led.c
delete mode 100644 arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
delete mode 100644 arch/arm/cpu/arm920t/ep93xx/speed.c
delete mode 100644 arch/arm/cpu/arm920t/ep93xx/timer.c
delete mode 100644 arch/arm/include/asm/arch-ep93xx/ep93xx.h
delete mode 100644 drivers/net/ep93xx_eth.c
delete mode 100644 drivers/net/ep93xx_eth.h
delete mode 100644 drivers/usb/host/ohci-ep93xx.c
diff --git a/arch/arm/cpu/arm920t/Makefile b/arch/arm/cpu/arm920t/Makefile
index c63f578f1a95..b70822c67ab9 100644
--- a/arch/arm/cpu/arm920t/Makefile
+++ b/arch/arm/cpu/arm920t/Makefile
@@ -7,7 +7,6 @@ extra-y = start.o
obj-y += cpu.o
-obj-$(CONFIG_EP93XX) += ep93xx/
obj-$(CONFIG_IMX) += imx/
# some files can only build in ARM mode
diff --git a/arch/arm/cpu/arm920t/ep93xx/Makefile b/arch/arm/cpu/arm920t/ep93xx/Makefile
deleted file mode 100644
index 152b5e7c5a2e..000000000000
--- a/arch/arm/cpu/arm920t/ep93xx/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Cirrus Logic EP93xx CPU-specific Makefile
-#
-# Copyright (C) 2009 Matthias Kaehlcke <matthias at kaehlcke.net>
-#
-# Copyright (C) 2004, 2005
-# Cory T. Tusar, Videon Central, Inc., <ctusar at videon-central.com>
-#
-# Copyright (C) 2006
-# Dominic Rath <Dominic.Rath at gmx.de>
-#
-# Based on an original Makefile, which is
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-obj-y = cpu.o led.o speed.o timer.o
-obj-y += lowlevel_init.o
diff --git a/arch/arm/cpu/arm920t/ep93xx/cpu.c b/arch/arm/cpu/arm920t/ep93xx/cpu.c
deleted file mode 100644
index 3435bdc748a2..000000000000
--- a/arch/arm/cpu/arm920t/ep93xx/cpu.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Cirrus Logic EP93xx CPU-specific support.
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias at kaehlcke.net>
- *
- * Copyright (C) 2004, 2005
- * Cory T. Tusar, Videon Central, Inc., <ctusar at videon-central.com>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
-
-/* We reset the CPU by generating a 1-->0 transition on DeviceCfg bit 31. */
-extern void reset_cpu(void)
-{
- struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
- uint32_t value;
-
- /* Unlock DeviceCfg and set SWRST */
- writel(0xAA, &syscon->sysswlock);
- value = readl(&syscon->devicecfg);
- value |= SYSCON_DEVICECFG_SWRST;
- writel(value, &syscon->devicecfg);
-
- /* Unlock DeviceCfg and clear SWRST */
- writel(0xAA, &syscon->sysswlock);
- value = readl(&syscon->devicecfg);
- value &= ~SYSCON_DEVICECFG_SWRST;
- writel(value, &syscon->devicecfg);
-
- /* Dying... */
- while (1)
- ; /* noop */
-}
diff --git a/arch/arm/cpu/arm920t/ep93xx/led.c b/arch/arm/cpu/arm920t/ep93xx/led.c
deleted file mode 100644
index 862663acbab5..000000000000
--- a/arch/arm/cpu/arm920t/ep93xx/led.c
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2010, 2009 Matthias Kaehlcke <matthias at kaehlcke.net>
- */
-
-#include <asm/io.h>
-#include <asm/arch/ep93xx.h>
-#include <config.h>
-#include <status_led.h>
-
-static uint8_t saved_state[2] = {CONFIG_LED_STATUS_OFF, CONFIG_LED_STATUS_OFF};
-static uint32_t gpio_pin[2] = {1 << CONFIG_LED_STATUS_GREEN,
- 1 << CONFIG_LED_STATUS_RED};
-
-static inline void switch_LED_on(uint8_t led)
-{
- register struct gpio_regs *gpio = (struct gpio_regs *)GPIO_BASE;
-
- writel(readl(&gpio->pedr) | gpio_pin[led], &gpio->pedr);
- saved_state[led] = CONFIG_LED_STATUS_ON;
-}
-
-static inline void switch_LED_off(uint8_t led)
-{
- register struct gpio_regs *gpio = (struct gpio_regs *)GPIO_BASE;
-
- writel(readl(&gpio->pedr) & ~gpio_pin[led], &gpio->pedr);
- saved_state[led] = CONFIG_LED_STATUS_OFF;
-}
-
-void red_led_on(void)
-{
- switch_LED_on(CONFIG_LED_STATUS_RED);
-}
-
-void red_led_off(void)
-{
- switch_LED_off(CONFIG_LED_STATUS_RED);
-}
-
-void green_led_on(void)
-{
- switch_LED_on(CONFIG_LED_STATUS_GREEN);
-}
-
-void green_led_off(void)
-{
- switch_LED_off(CONFIG_LED_STATUS_GREEN);
-}
-
-void __led_init(led_id_t mask, int state)
-{
- __led_set(mask, state);
-}
-
-void __led_toggle(led_id_t mask)
-{
- if (CONFIG_LED_STATUS_RED == mask) {
- if (CONFIG_LED_STATUS_ON == saved_state[CONFIG_LED_STATUS_RED])
- red_led_off();
- else
- red_led_on();
- } else if (CONFIG_LED_STATUS_GREEN == mask) {
- if (CONFIG_LED_STATUS_ON ==
- saved_state[CONFIG_LED_STATUS_GREEN])
- green_led_off();
- else
- green_led_on();
- }
-}
-
-void __led_set(led_id_t mask, int state)
-{
- if (CONFIG_LED_STATUS_RED == mask) {
- if (CONFIG_LED_STATUS_ON == state)
- red_led_on();
- else
- red_led_off();
- } else if (CONFIG_LED_STATUS_GREEN == mask) {
- if (CONFIG_LED_STATUS_ON == state)
- green_led_on();
- else
- green_led_off();
- }
-}
diff --git a/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S b/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
deleted file mode 100644
index 5239b1053c25..000000000000
--- a/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
+++ /dev/null
@@ -1,457 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Low-level initialization for EP93xx
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias at kaehlcke.net>
- * Copyright (C) 2013
- * Sergey Kostanabev <sergey.kostanbaev <at> fairwaves.ru>
- *
- * Copyright (C) 2006 Dominic Rath <Dominic.Rath at gmx.de>
- * Copyright (C) 2006 Cirrus Logic Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- */
-
-#include <config.h>
-#include <asm/arch-ep93xx/ep93xx.h>
-
-/*
-/* Configure the SDRAM based on the supplied settings.
- *
- * Input: r0 - SDRAM DEVCFG register
- * r2 - configuration for SDRAM chips
- * Output: none
- * Modifies: r3, r4
- */
-ep93xx_sdram_config:
- /* Program the SDRAM device configuration register. */
- ldr r3, =SDRAM_BASE
-#ifdef CONFIG_EDB93XX_SDCS0
- str r0, [r3, #SDRAM_OFF_DEVCFG0]
-#endif
-#ifdef CONFIG_EDB93XX_SDCS1
- str r0, [r3, #SDRAM_OFF_DEVCFG1]
-#endif
-#ifdef CONFIG_EDB93XX_SDCS2
- str r0, [r3, #SDRAM_OFF_DEVCFG2]
-#endif
-#ifdef CONFIG_EDB93XX_SDCS3
- str r0, [r3, #SDRAM_OFF_DEVCFG3]
-#endif
-
- /* Set the Initialize and MRS bits (issue continuous NOP commands
- * (INIT & MRS set))
- */
- ldr r4, =(EP93XX_SDRAMCTRL_GLOBALCFG_INIT | \
- EP93XX_SDRAMCTRL_GLOBALCFG_MRS | \
- EP93XX_SDRAMCTRL_GLOBALCFG_CKE)
- str r4, [r3, #SDRAM_OFF_GLCONFIG]
-
- /* Delay for 200us. */
- mov r4, #0x3000
-delay1:
- subs r4, r4, #1
- bne delay1
-
- /* Clear the MRS bit to issue a precharge all. */
- ldr r4, =(EP93XX_SDRAMCTRL_GLOBALCFG_INIT | \
- EP93XX_SDRAMCTRL_GLOBALCFG_CKE)
- str r4, [r3, #SDRAM_OFF_GLCONFIG]
-
- /* Temporarily set the refresh timer to 0x10. Make it really low so
- * that refresh cycles are generated.
- */
- ldr r4, =0x10
- str r4, [r3, #SDRAM_OFF_REFRSHTIMR]
-
- /* Delay for at least 80 SDRAM clock cycles. */
- mov r4, #80
-delay2:
- subs r4, r4, #1
- bne delay2
-
- /* Set the refresh timer to the fastest required for any device
- * that might be used. Set 9.6 ms refresh time.
- */
- ldr r4, =0x01e0
- str r4, [r3, #SDRAM_OFF_REFRSHTIMR]
-
- /* Select mode register update mode. */
- ldr r4, =(EP93XX_SDRAMCTRL_GLOBALCFG_CKE | \
- EP93XX_SDRAMCTRL_GLOBALCFG_MRS)
- str r4, [r3, #SDRAM_OFF_GLCONFIG]
-
- /* Program the mode register on the SDRAM by performing fake read */
- ldr r4, [r2]
-
- /* Select normal operating mode. */
- ldr r4, =EP93XX_SDRAMCTRL_GLOBALCFG_CKE
- str r4, [r3, #SDRAM_OFF_GLCONFIG]
-
- /* Return to the caller. */
- mov pc, lr
-
-/*
- * Test to see if the SDRAM has been configured in a usable mode.
- *
- * Input: r0 - Test address of SDRAM
- * Output: r0 - 0 -- Test OK, -1 -- Failed
- * Modifies: r0-r5
- */
-ep93xx_sdram_test:
- /* Load the test patterns to be written to SDRAM. */
- ldr r1, =0xf00dface
- ldr r2, =0xdeadbeef
- ldr r3, =0x08675309
- ldr r4, =0xdeafc0ed
-
- /* Store the test patterns to SDRAM. */
- stmia r0, {r1-r4}
-
- /* Load the test patterns from SDRAM one at a time and compare them
- * to the actual pattern.
- */
- ldr r5, [r0]
- cmp r5, r1
- ldreq r5, [r0, #0x0004]
- cmpeq r5, r2
- ldreq r5, [r0, #0x0008]
- cmpeq r5, r3
- ldreq r5, [r0, #0x000c]
- cmpeq r5, r4
-
- /* Return -1 if a mismatch was encountered, 0 otherwise. */
- mvnne r0, #0xffffffff
- moveq r0, #0x00000000
-
- /* Return to the caller. */
- mov pc, lr
-
-/*
- * Determine the size of the SDRAM. Use data=address for the scan.
- *
- * Input: r0 - Start SDRAM address
- * Return: r0 - Single block size
- * r1 - Valid block mask
- * r2 - Total block count
- * Modifies: r0-r5
- */
-ep93xx_sdram_size:
- /* Store zero at offset zero. */
- str r0, [r0]
-
- /* Start checking for an alias at 1MB into SDRAM. */
- ldr r1, =0x00100000
-
- /* Store the offset at the current offset. */
-check_block_size:
- str r1, [r0, r1]
-
- /* Read back from zero. */
- ldr r2, [r0]
-
- /* Stop searching of an alias was found. */
- cmp r1, r2
- beq found_block_size
-
- /* Advance to the next power of two boundary. */
- mov r1, r1, lsl #1
-
- /* Loop back if the size has not reached 256MB. */
- cmp r1, #0x10000000
- bne check_block_size
-
- /* A full 256MB of memory was found, so return it now. */
- ldr r0, =0x10000000
- ldr r1, =0x00000000
- ldr r2, =0x00000001
- mov pc, lr
-
- /* An alias was found. See if the first block is 128MB in size. */
-found_block_size:
- cmp r1, #0x08000000
-
- /* The first block is 128MB, so there is no further memory. Return it
- * now.
- */
- ldreq r0, =0x08000000
- ldreq r1, =0x00000000
- ldreq r2, =0x00000001
- moveq pc, lr
-
- /* Save the block size, set the block address bits to zero, and
- * initialize the block count to one.
- */
- mov r3, r1
- ldr r4, =0x00000000
- ldr r5, =0x00000001
-
- /* Look for additional blocks of memory by searching for non-aliases. */
-find_blocks:
- /* Store zero back to address zero. It may be overwritten. */
- str r0, [r0]
-
- /* Advance to the next power of two boundary. */
- mov r1, r1, lsl #1
-
- /* Store the offset at the current offset. */
- str r1, [r0, r1]
-
- /* Read back from zero. */
- ldr r2, [r0]
-
- /* See if a non-alias was found. */
- cmp r1, r2
-
- /* If a non-alias was found, then or in the block address bit and
- * multiply the block count by two (since there are two unique
- * blocks, one with this bit zero and one with it one).
- */
- orrne r4, r4, r1
- movne r5, r5, lsl #1
-
- /* Continue searching if there are more address bits to check. */
- cmp r1, #0x08000000
- bne find_blocks
-
- /* Return the block size, address mask, and count. */
- mov r0, r3
- mov r1, r4
- mov r2, r5
-
- /* Return to the caller. */
- mov pc, lr
-
-
-.globl lowlevel_init
-lowlevel_init:
-
- mov r6, lr
-
- /* Make sure caches are off and invalidated. */
- ldr r0, =0x00000000
- mcr p15, 0, r0, c1, c0, 0
- nop
- nop
- nop
- nop
- nop
-
- /* Turn off the green LED and turn on the red LED. If the red LED
- * is left on for too long, the external reset circuit described
- * by application note AN258 will cause the system to reset.
- */
- ldr r1, =EP93XX_LED_DATA
- ldr r0, [r1]
- bic r0, r0, #EP93XX_LED_GREEN_ON
- orr r0, r0, #EP93XX_LED_RED_ON
- str r0, [r1]
-
- /* Undo the silly static memory controller programming performed
- * by the boot rom.
- */
- ldr r0, =SMC_BASE
-
- /* Set WST1 and WST2 to 31 HCLK cycles (slowest access) */
- ldr r1, =0x0000fbe0
-
- /* Reset EP93XX_OFF_SMCBCR0 */
- ldr r2, [r0]
- orr r2, r2, r1
- str r2, [r0]
-
- ldr r2, [r0, #EP93XX_OFF_SMCBCR1]
- orr r2, r2, r1
- str r2, [r0, #EP93XX_OFF_SMCBCR1]
-
- ldr r2, [r0, #EP93XX_OFF_SMCBCR2]
- orr r2, r2, r1
- str r2, [r0, #EP93XX_OFF_SMCBCR2]
-
- ldr r2, [r0, #EP93XX_OFF_SMCBCR3]
- orr r2, r2, r1
- str r2, [r0, #EP93XX_OFF_SMCBCR3]
-
- ldr r2, [r0, #EP93XX_OFF_SMCBCR6]
- orr r2, r2, r1
- str r2, [r0, #EP93XX_OFF_SMCBCR6]
-
- ldr r2, [r0, #EP93XX_OFF_SMCBCR7]
- orr r2, r2, r1
- str r2, [r0, #EP93XX_OFF_SMCBCR7]
-
- /* Set the PLL1 and processor clock. */
- ldr r0, =SYSCON_BASE
-#ifdef CONFIG_EDB9301
- /* 332MHz, giving a 166MHz processor clock. */
- ldr r1, = 0x02b49907
-#else
-
-#ifdef CONFIG_EDB93XX_INDUSTRIAL
- /* 384MHz, giving a 196MHz processor clock. */
- ldr r1, =0x02a4bb38
-#else
- /* 400MHz, giving a 200MHz processor clock. */
- ldr r1, =0x02a4e39e
-#endif
-#endif
- str r1, [r0, #SYSCON_OFF_CLKSET1]
-
- nop
- nop
- nop
- nop
- nop
-
- /* Need to make sure that SDRAM is configured correctly before
- * coping the code into it.
- */
-
-#ifdef CONFIG_EDB93XX_SDCS0
- mov r11, #SDRAM_DEVCFG0_BASE
-#endif
-#ifdef CONFIG_EDB93XX_SDCS1
- mov r11, #SDRAM_DEVCFG1_BASE
-#endif
-#ifdef CONFIG_EDB93XX_SDCS2
- mov r11, #SDRAM_DEVCFG2_BASE
-#endif
-#ifdef CONFIG_EDB93XX_SDCS3
- ldr r0, =SYSCON_BASE
- ldr r0, [r0, #SYSCON_OFF_SYSCFG]
- ands r0, r0, #SYSCON_SYSCFG_LASDO
- moveq r11, #SDRAM_DEVCFG3_ASD0_BASE
- movne r11, #SDRAM_DEVCFG3_ASD1_BASE
-#endif
- /* See Table 13-5 in EP93xx datasheet for more info about DRAM
- * register mapping */
-
- /* Try a 32-bit wide configuration of SDRAM. */
- ldr r0, =(EP93XX_SDRAMCTRL_DEVCFG_BANKCOUNT | \
- EP93XX_SDRAMCTRL_DEVCFG_SROMLL | \
- EP93XX_SDRAMCTRL_DEVCFG_CASLAT_2 | \
- EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_2)
-
- /* Set burst count: 4 and CAS: 2
- * Burst mode [A11:A10]; CAS [A16:A14]
- */
- orr r2, r11, #0x00008800
- bl ep93xx_sdram_config
-
- /* Test the SDRAM. */
- mov r0, r11
- bl ep93xx_sdram_test
- cmp r0, #0x00000000
- beq ep93xx_sdram_done
-
- /* Try a 16-bit wide configuration of SDRAM. */
- ldr r0, =(EP93XX_SDRAMCTRL_DEVCFG_BANKCOUNT | \
- EP93XX_SDRAMCTRL_DEVCFG_SROMLL | \
- EP93XX_SDRAMCTRL_DEVCFG_CASLAT_2 | \
- EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_2 | \
- EP93XX_SDRAMCTRL_DEVCFG_EXTBUSWIDTH)
-
- /* Set burst count: 8, CAS: 2, sequential burst
- * Accoring to Table 13-3 for 16bit operations mapping must be shifted.
- * Burst mode [A10:A9]; CAS [A15:A13]
- */
- orr r2, r11, #0x00004600
- bl ep93xx_sdram_config
-
- /* Test the SDRAM. */
- mov r0, r11
- bl ep93xx_sdram_test
- cmp r0, #0x00000000
- beq ep93xx_sdram_done
-
- /* Turn off the red LED. */
- ldr r0, =EP93XX_LED_DATA
- ldr r1, [r0]
- bic r1, r1, #EP93XX_LED_RED_ON
- str r1, [r0]
-
- /* There is no SDRAM so flash the green LED. */
-flash_green:
- orr r1, r1, #EP93XX_LED_GREEN_ON
- str r1, [r0]
- ldr r2, =0x00010000
-flash_green_delay_1:
- subs r2, r2, #1
- bne flash_green_delay_1
- bic r1, r1, #EP93XX_LED_GREEN_ON
- str r1, [r0]
- ldr r2, =0x00010000
-flash_green_delay_2:
- subs r2, r2, #1
- bne flash_green_delay_2
- orr r1, r1, #EP93XX_LED_GREEN_ON
- str r1, [r0]
- ldr r2, =0x00010000
-flash_green_delay_3:
- subs r2, r2, #1
- bne flash_green_delay_3
- bic r1, r1, #EP93XX_LED_GREEN_ON
- str r1, [r0]
- ldr r2, =0x00050000
-flash_green_delay_4:
- subs r2, r2, #1
- bne flash_green_delay_4
- b flash_green
-
-
-ep93xx_sdram_done:
- ldr r1, =EP93XX_LED_DATA
- ldr r0, [r1]
- bic r0, r0, #EP93XX_LED_RED_ON
- str r0, [r1]
-
- /* Determine the size of the SDRAM. */
- mov r0, r11
- bl ep93xx_sdram_size
-
- /* Save the SDRAM characteristics. */
- mov r8, r0
- mov r9, r1
- mov r10, r2
-
- /* Compute total memory size into r1 */
- mul r1, r8, r10
-#ifdef CONFIG_EDB93XX_SDCS0
- ldr r2, [r0, #SDRAM_OFF_DEVCFG0]
-#endif
-#ifdef CONFIG_EDB93XX_SDCS1
- ldr r2, [r0, #SDRAM_OFF_DEVCFG1]
-#endif
-#ifdef CONFIG_EDB93XX_SDCS2
- ldr r2, [r0, #SDRAM_OFF_DEVCFG2]
-#endif
-#ifdef CONFIG_EDB93XX_SDCS3
- ldr r2, [r0, #SDRAM_OFF_DEVCFG3]
-#endif
-
- /* Consider small DRAM size as:
- * < 32Mb for 32bit bus
- * < 64Mb for 16bit bus
- */
- tst r2, #EP93XX_SDRAMCTRL_DEVCFG_EXTBUSWIDTH
- moveq r1, r1, lsr #1
- cmp r1, #0x02000000
-
-#if defined(CONFIG_EDB9301)
- /* Set refresh counter to 20ms for small DRAM size, otherwise 9.6ms */
- movlt r1, #0x03f0
- movge r1, #0x01e0
-#else
- /* Set refresh counter to 30.7ms for small DRAM size, otherwise 15ms */
- movlt r1, #0x0600
- movge r1, #0x2f0
-#endif
- str r1, [r0, #SDRAM_OFF_REFRSHTIMR]
-
- /* Save the memory configuration information. */
- orr r0, r11, #UBOOT_MEMORYCNF_BANK_SIZE
- stmia r0, {r8-r11}
-
- mov lr, r6
- mov pc, lr
diff --git a/arch/arm/cpu/arm920t/ep93xx/speed.c b/arch/arm/cpu/arm920t/ep93xx/speed.c
deleted file mode 100644
index 8dd3904e82c8..000000000000
--- a/arch/arm/cpu/arm920t/ep93xx/speed.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Cirrus Logic EP93xx PLL support.
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias at kaehlcke.net>
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
-#include <div64.h>
-
-/*
- * get_board_sys_clk() should be defined as the input frequency of the PLL.
- *
- * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
- * the specified bus in HZ.
- */
-
-/*
- * return the PLL output frequency
- *
- * PLL rate = get_board_sys_clk() * (X1FBD + 1) * (X2FBD + 1)
- * / (X2IPD + 1) / 2^PS
- */
-static ulong get_PLLCLK(uint32_t *pllreg)
-{
- uint8_t i;
- const uint32_t clkset = readl(pllreg);
- uint64_t rate = get_board_sys_clk();
- rate *= ((clkset >> SYSCON_CLKSET_PLL_X1FBD1_SHIFT) & 0x1f) + 1;
- rate *= ((clkset >> SYSCON_CLKSET_PLL_X2FBD2_SHIFT) & 0x3f) + 1;
- do_div(rate, (clkset & 0x1f) + 1); /* X2IPD */
- for (i = 0; i < ((clkset >> SYSCON_CLKSET_PLL_PS_SHIFT) & 3); i++)
- rate >>= 1;
-
- return (ulong)rate;
-}
-
-/* return FCLK frequency */
-ulong get_FCLK(void)
-{
- const uint8_t fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
- struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-
- const uint32_t clkset1 = readl(&syscon->clkset1);
- const uint8_t fclk_div =
- fclk_divisors[(clkset1 >> SYSCON_CLKSET1_FCLK_DIV_SHIFT) & 7];
- const ulong fclk_rate = get_PLLCLK(&syscon->clkset1) / fclk_div;
-
- return fclk_rate;
-}
-
-/* return HCLK frequency */
-ulong get_HCLK(void)
-{
- const uint8_t hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
- struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-
- const uint32_t clkset1 = readl(&syscon->clkset1);
- const uint8_t hclk_div =
- hclk_divisors[(clkset1 >> SYSCON_CLKSET1_HCLK_DIV_SHIFT) & 7];
- const ulong hclk_rate = get_PLLCLK(&syscon->clkset1) / hclk_div;
-
- return hclk_rate;
-}
-
-/* return PCLK frequency */
-ulong get_PCLK(void)
-{
- const uint8_t pclk_divisors[] = { 1, 2, 4, 8 };
- struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-
- const uint32_t clkset1 = readl(&syscon->clkset1);
- const uint8_t pclk_div =
- pclk_divisors[(clkset1 >> SYSCON_CLKSET1_PCLK_DIV_SHIFT) & 3];
- const ulong pclk_rate = get_HCLK() / pclk_div;
-
- return pclk_rate;
-}
-
-/* return UCLK frequency */
-ulong get_UCLK(void)
-{
- struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
- ulong uclk_rate;
-
- const uint32_t value = readl(&syscon->pwrcnt);
- if (value & SYSCON_PWRCNT_UART_BAUD)
- uclk_rate = get_board_sys_clk();
- else
- uclk_rate = get_board_sys_clk() / 2;
-
- return uclk_rate;
-}
diff --git a/arch/arm/cpu/arm920t/ep93xx/timer.c b/arch/arm/cpu/arm920t/ep93xx/timer.c
deleted file mode 100644
index 892bb06db10e..000000000000
--- a/arch/arm/cpu/arm920t/ep93xx/timer.c
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Cirrus Logic EP93xx timer support.
- *
- * Copyright (C) 2009, 2010 Matthias Kaehlcke <matthias at kaehlcke.net>
- *
- * Copyright (C) 2004, 2005
- * Cory T. Tusar, Videon Central, Inc., <ctusar at videon-central.com>
- *
- * Based on the original intr.c Cirrus Logic EP93xx Rev D. interrupt support,
- * author unknown.
- */
-
-#include <common.h>
-#include <init.h>
-#include <time.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
-#include <div64.h>
-
-#define TIMER_CLKSEL (1 << 3)
-#define TIMER_ENABLE (1 << 7)
-
-#define TIMER_FREQ 508469 /* ticks / second */
-#define TIMER_MAX_VAL 0xFFFFFFFF
-
-static struct ep93xx_timer
-{
- unsigned long long ticks;
- unsigned long last_read;
-} timer;
-
-static inline unsigned long long usecs_to_ticks(unsigned long usecs)
-{
- unsigned long long ticks = (unsigned long long)usecs * TIMER_FREQ;
- do_div(ticks, 1000 * 1000);
-
- return ticks;
-}
-
-static inline void read_timer(void)
-{
- struct timer_regs *timer_regs = (struct timer_regs *)TIMER_BASE;
- const unsigned long now = TIMER_MAX_VAL - readl(&timer_regs->timer3.value);
-
- if (now >= timer.last_read)
- timer.ticks += now - timer.last_read;
- else
- /* an overflow occurred */
- timer.ticks += TIMER_MAX_VAL - timer.last_read + now;
-
- timer.last_read = now;
-}
-
-/*
- * Get the number of ticks (in CONFIG_SYS_HZ resolution)
- */
-unsigned long long get_ticks(void)
-{
- unsigned long long sys_ticks;
-
- read_timer();
-
- sys_ticks = timer.ticks * CONFIG_SYS_HZ;
- do_div(sys_ticks, TIMER_FREQ);
-
- return sys_ticks;
-}
-
-unsigned long get_timer(unsigned long base)
-{
- return get_ticks() - base;
-}
-
-void __udelay(unsigned long usec)
-{
- unsigned long long target;
-
- read_timer();
-
- target = timer.ticks + usecs_to_ticks(usec);
-
- while (timer.ticks < target)
- read_timer();
-}
-
-int timer_init(void)
-{
- struct timer_regs *timer_regs = (struct timer_regs *)TIMER_BASE;
-
- /* use timer 3 with 508KHz and free running, not enabled now */
- writel(TIMER_CLKSEL, &timer_regs->timer3.control);
-
- /* set initial timer value */
- writel(TIMER_MAX_VAL, &timer_regs->timer3.load);
-
- /* Enable the timer */
- writel(TIMER_ENABLE | TIMER_CLKSEL,
- &timer_regs->timer3.control);
-
- /* Reset the timer */
- read_timer();
- timer.ticks = 0;
-
- return 0;
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-unsigned long get_tbclk(void)
-{
- return CONFIG_SYS_HZ;
-}
diff --git a/arch/arm/include/asm/arch-ep93xx/ep93xx.h b/arch/arm/include/asm/arch-ep93xx/ep93xx.h
deleted file mode 100644
index 272b64480d1f..000000000000
--- a/arch/arm/include/asm/arch-ep93xx/ep93xx.h
+++ /dev/null
@@ -1,666 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Cirrus Logic EP93xx register definitions.
- *
- * Copyright (C) 2013
- * Sergey Kostanbaev <sergey.kostanbaev <at> fairwaves.ru>
- *
- * Copyright (C) 2009
- * Matthias Kaehlcke <matthias at kaehlcke.net>
- *
- * Copyright (C) 2006
- * Dominic Rath <Dominic.Rath at gmx.de>
- *
- * Copyright (C) 2004, 2005
- * Cory T. Tusar, Videon Central, Inc., <ctusar at videon-central.com>
- *
- * Based in large part on linux/include/asm-arm/arch-ep93xx/regmap.h, which is
- *
- * Copyright (C) 2004 Ray Lehtiniemi
- * Copyright (C) 2003 Cirrus Logic, Inc
- * Copyright (C) 1999 ARM Limited.
- */
-
-#define EP93XX_AHB_BASE 0x80000000
-#define EP93XX_APB_BASE 0x80800000
-
-/*
- * 0x80000000 - 0x8000FFFF: DMA
- */
-#define DMA_OFFSET 0x000000
-#define DMA_BASE (EP93XX_AHB_BASE | DMA_OFFSET)
-
-#ifndef __ASSEMBLY__
-struct dma_channel {
- uint32_t control;
- uint32_t interrupt;
- uint32_t ppalloc;
- uint32_t status;
- uint32_t reserved0;
- uint32_t remain;
- uint32_t reserved1[2];
- uint32_t maxcnt0;
- uint32_t base0;
- uint32_t current0;
- uint32_t reserved2;
- uint32_t maxcnt1;
- uint32_t base1;
- uint32_t current1;
- uint32_t reserved3;
-};
-
-struct dma_regs {
- struct dma_channel m2p_channel_0;
- struct dma_channel m2p_channel_1;
- struct dma_channel m2p_channel_2;
- struct dma_channel m2p_channel_3;
- struct dma_channel m2m_channel_0;
- struct dma_channel m2m_channel_1;
- struct dma_channel reserved0[2];
- struct dma_channel m2p_channel_5;
- struct dma_channel m2p_channel_4;
- struct dma_channel m2p_channel_7;
- struct dma_channel m2p_channel_6;
- struct dma_channel m2p_channel_9;
- struct dma_channel m2p_channel_8;
- uint32_t channel_arbitration;
- uint32_t reserved[15];
- uint32_t global_interrupt;
-};
-#endif
-
-/*
- * 0x80010000 - 0x8001FFFF: Ethernet MAC
- */
-#define MAC_OFFSET 0x010000
-#define MAC_BASE (EP93XX_AHB_BASE | MAC_OFFSET)
-
-#ifndef __ASSEMBLY__
-struct mac_queue {
- uint32_t badd;
- union { /* deal with half-word aligned registers */
- uint32_t blen;
- union {
- uint16_t filler;
- uint16_t curlen;
- };
- };
- uint32_t curadd;
-};
-
-struct mac_regs {
- uint32_t rxctl;
- uint32_t txctl;
- uint32_t testctl;
- uint32_t reserved0;
- uint32_t miicmd;
- uint32_t miidata;
- uint32_t miists;
- uint32_t reserved1;
- uint32_t selfctl;
- uint32_t inten;
- uint32_t intstsp;
- uint32_t intstsc;
- uint32_t reserved2[2];
- uint32_t diagad;
- uint32_t diagdata;
- uint32_t gt;
- uint32_t fct;
- uint32_t fcf;
- uint32_t afp;
- union {
- struct {
- uint32_t indad;
- uint32_t indad_upper;
- };
- uint32_t hashtbl;
- };
- uint32_t reserved3[2];
- uint32_t giintsts;
- uint32_t giintmsk;
- uint32_t giintrosts;
- uint32_t giintfrc;
- uint32_t txcollcnt;
- uint32_t rxmissnct;
- uint32_t rxruntcnt;
- uint32_t reserved4;
- uint32_t bmctl;
- uint32_t bmsts;
- uint32_t rxbca;
- uint32_t reserved5;
- struct mac_queue rxdq;
- uint32_t rxdqenq;
- struct mac_queue rxstsq;
- uint32_t rxstsqenq;
- struct mac_queue txdq;
- uint32_t txdqenq;
- struct mac_queue txstsq;
- uint32_t reserved6;
- uint32_t rxbufthrshld;
- uint32_t txbufthrshld;
- uint32_t rxststhrshld;
- uint32_t txststhrshld;
- uint32_t rxdthrshld;
- uint32_t txdthrshld;
- uint32_t maxfrmlen;
- uint32_t maxhdrlen;
-};
-#endif
-
-#define SELFCTL_RWP (1 << 7)
-#define SELFCTL_GPO0 (1 << 5)
-#define SELFCTL_PUWE (1 << 4)
-#define SELFCTL_PDWE (1 << 3)
-#define SELFCTL_MIIL (1 << 2)
-#define SELFCTL_RESET (1 << 0)
-
-#define INTSTS_RWI (1 << 30)
-#define INTSTS_RXMI (1 << 29)
-#define INTSTS_RXBI (1 << 28)
-#define INTSTS_RXSQI (1 << 27)
-#define INTSTS_TXLEI (1 << 26)
-#define INTSTS_ECIE (1 << 25)
-#define INTSTS_TXUHI (1 << 24)
-#define INTSTS_MOI (1 << 18)
-#define INTSTS_TXCOI (1 << 17)
-#define INTSTS_RXROI (1 << 16)
-#define INTSTS_MIII (1 << 12)
-#define INTSTS_PHYI (1 << 11)
-#define INTSTS_TI (1 << 10)
-#define INTSTS_AHBE (1 << 8)
-#define INTSTS_OTHER (1 << 4)
-#define INTSTS_TXSQ (1 << 3)
-#define INTSTS_RXSQ (1 << 2)
-
-#define BMCTL_MT (1 << 13)
-#define BMCTL_TT (1 << 12)
-#define BMCTL_UNH (1 << 11)
-#define BMCTL_TXCHR (1 << 10)
-#define BMCTL_TXDIS (1 << 9)
-#define BMCTL_TXEN (1 << 8)
-#define BMCTL_EH2 (1 << 6)
-#define BMCTL_EH1 (1 << 5)
-#define BMCTL_EEOB (1 << 4)
-#define BMCTL_RXCHR (1 << 2)
-#define BMCTL_RXDIS (1 << 1)
-#define BMCTL_RXEN (1 << 0)
-
-#define BMSTS_TXACT (1 << 7)
-#define BMSTS_TP (1 << 4)
-#define BMSTS_RXACT (1 << 3)
-#define BMSTS_QID_MASK 0x07
-#define BMSTS_QID_RXDATA 0x00
-#define BMSTS_QID_TXDATA 0x01
-#define BMSTS_QID_RXSTS 0x02
-#define BMSTS_QID_TXSTS 0x03
-#define BMSTS_QID_RXDESC 0x04
-#define BMSTS_QID_TXDESC 0x05
-
-#define AFP_MASK 0x07
-#define AFP_IAPRIMARY 0x00
-#define AFP_IASECONDARY1 0x01
-#define AFP_IASECONDARY2 0x02
-#define AFP_IASECONDARY3 0x03
-#define AFP_TX 0x06
-#define AFP_HASH 0x07
-
-#define RXCTL_PAUSEA (1 << 20)
-#define RXCTL_RXFCE1 (1 << 19)
-#define RXCTL_RXFCE0 (1 << 18)
-#define RXCTL_BCRC (1 << 17)
-#define RXCTL_SRXON (1 << 16)
-#define RXCTL_RCRCA (1 << 13)
-#define RXCTL_RA (1 << 12)
-#define RXCTL_PA (1 << 11)
-#define RXCTL_BA (1 << 10)
-#define RXCTL_MA (1 << 9)
-#define RXCTL_IAHA (1 << 8)
-#define RXCTL_IA3 (1 << 3)
-#define RXCTL_IA2 (1 << 2)
-#define RXCTL_IA1 (1 << 1)
-#define RXCTL_IA0 (1 << 0)
-
-#define TXCTL_DEFDIS (1 << 7)
-#define TXCTL_MBE (1 << 6)
-#define TXCTL_ICRC (1 << 5)
-#define TXCTL_TPD (1 << 4)
-#define TXCTL_OCOLL (1 << 3)
-#define TXCTL_SP (1 << 2)
-#define TXCTL_PB (1 << 1)
-#define TXCTL_STXON (1 << 0)
-
-#define MIICMD_REGAD_MASK (0x001F)
-#define MIICMD_PHYAD_MASK (0x03E0)
-#define MIICMD_OPCODE_MASK (0xC000)
-#define MIICMD_PHYAD_8950 (0x0000)
-#define MIICMD_OPCODE_READ (0x8000)
-#define MIICMD_OPCODE_WRITE (0x4000)
-
-#define MIISTS_BUSY (1 << 0)
-
-/*
- * 0x80020000 - 0x8002FFFF: USB OHCI
- */
-#define USB_OFFSET 0x020000
-#define USB_BASE (EP93XX_AHB_BASE | USB_OFFSET)
-
-/*
- * 0x80030000 - 0x8003FFFF: Raster engine
- */
-#if (defined(CONFIG_EP9307) || defined(CONFIG_EP9312) || defined(CONFIG_EP9315))
-#define RASTER_OFFSET 0x030000
-#define RASTER_BASE (EP93XX_AHB_BASE | RASTER_OFFSET)
-#endif
-
-/*
- * 0x80040000 - 0x8004FFFF: Graphics accelerator
- */
-#if defined(CONFIG_EP9315)
-#define GFX_OFFSET 0x040000
-#define GFX_BASE (EP93XX_AHB_BASE | GFX_OFFSET)
-#endif
-
-/*
- * 0x80050000 - 0x8005FFFF: Reserved
- */
-
-/*
- * 0x80060000 - 0x8006FFFF: SDRAM controller
- */
-#define SDRAM_OFFSET 0x060000
-#define SDRAM_BASE (EP93XX_AHB_BASE | SDRAM_OFFSET)
-
-#ifndef __ASSEMBLY__
-struct sdram_regs {
- uint32_t reserved;
- uint32_t glconfig;
- uint32_t refrshtimr;
- uint32_t bootsts;
- uint32_t devcfg0;
- uint32_t devcfg1;
- uint32_t devcfg2;
- uint32_t devcfg3;
-};
-#endif
-
-#define SDRAM_DEVCFG_EXTBUSWIDTH (1 << 2)
-#define SDRAM_DEVCFG_BANKCOUNT (1 << 3)
-#define SDRAM_DEVCFG_SROMLL (1 << 5)
-#define SDRAM_DEVCFG_CASLAT_2 0x00010000
-#define SDRAM_DEVCFG_RASTOCAS_2 0x00200000
-
-#define SDRAM_OFF_GLCONFIG 0x0004
-#define SDRAM_OFF_REFRSHTIMR 0x0008
-
-#define SDRAM_OFF_DEVCFG0 0x0010
-#define SDRAM_OFF_DEVCFG1 0x0014
-#define SDRAM_OFF_DEVCFG2 0x0018
-#define SDRAM_OFF_DEVCFG3 0x001C
-
-#define SDRAM_DEVCFG0_BASE 0xC0000000
-#define SDRAM_DEVCFG1_BASE 0xD0000000
-#define SDRAM_DEVCFG2_BASE 0xE0000000
-#define SDRAM_DEVCFG3_ASD0_BASE 0xF0000000
-#define SDRAM_DEVCFG3_ASD1_BASE 0x00000000
-
-#define GLCONFIG_INIT (1 << 0)
-#define GLCONFIG_MRS (1 << 1)
-#define GLCONFIG_SMEMBUSY (1 << 5)
-#define GLCONFIG_LCR (1 << 6)
-#define GLCONFIG_REARBEN (1 << 7)
-#define GLCONFIG_CLKSHUTDOWN (1 << 30)
-#define GLCONFIG_CKE (1 << 31)
-
-#define EP93XX_SDRAMCTRL 0x80060000
-#define EP93XX_SDRAMCTRL_GLOBALCFG_INIT 0x00000001
-#define EP93XX_SDRAMCTRL_GLOBALCFG_MRS 0x00000002
-#define EP93XX_SDRAMCTRL_GLOBALCFG_SMEMBUSY 0x00000020
-#define EP93XX_SDRAMCTRL_GLOBALCFG_LCR 0x00000040
-#define EP93XX_SDRAMCTRL_GLOBALCFG_REARBEN 0x00000080
-#define EP93XX_SDRAMCTRL_GLOBALCFG_CLKSHUTDOWN 0x40000000
-#define EP93XX_SDRAMCTRL_GLOBALCFG_CKE 0x80000000
-
-#define EP93XX_SDRAMCTRL_REFRESH_MASK 0x0000FFFF
-
-#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_32 0x00000002
-#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_16 0x00000001
-#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_8 0x00000000
-#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_MASK 0x00000003
-#define EP93XX_SDRAMCTRL_BOOTSTATUS_MEDIA 0x00000004
-
-#define EP93XX_SDRAMCTRL_DEVCFG_EXTBUSWIDTH 0x00000004
-#define EP93XX_SDRAMCTRL_DEVCFG_BANKCOUNT 0x00000008
-#define EP93XX_SDRAMCTRL_DEVCFG_SROM512 0x00000010
-#define EP93XX_SDRAMCTRL_DEVCFG_SROMLL 0x00000020
-#define EP93XX_SDRAMCTRL_DEVCFG_2KPAGE 0x00000040
-#define EP93XX_SDRAMCTRL_DEVCFG_SFCONFIGADDR 0x00000080
-#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_MASK 0x00070000
-#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_2 0x00010000
-#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_3 0x00020000
-#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_4 0x00030000
-#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_5 0x00040000
-#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_6 0x00050000
-#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_7 0x00060000
-#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_8 0x00070000
-#define EP93XX_SDRAMCTRL_DEVCFG_WBL 0x00080000
-#define EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_MASK 0x00300000
-#define EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_2 0x00200000
-#define EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_3 0x00300000
-#define EP93XX_SDRAMCTRL_DEVCFG_AUTOPRECHARGE 0x01000000
-
-/*
- * 0x80070000 - 0x8007FFFF: Reserved
- */
-
-/*
- * 0x80080000 - 0x8008FFFF: SRAM controller & PCMCIA
- */
-#define SMC_OFFSET 0x080000
-#define SMC_BASE (EP93XX_AHB_BASE | SMC_OFFSET)
-
-#ifndef __ASSEMBLY__
-struct smc_regs {
- uint32_t bcr0;
- uint32_t bcr1;
- uint32_t bcr2;
- uint32_t bcr3;
- uint32_t reserved0[2];
- uint32_t bcr6;
- uint32_t bcr7;
-#if defined(CONFIG_EP9315)
- uint32_t pcattribute;
- uint32_t pccommon;
- uint32_t pcio;
- uint32_t reserved1[5];
- uint32_t pcmciactrl;
-#endif
-};
-#endif
-
-#define EP93XX_OFF_SMCBCR0 0x00
-#define EP93XX_OFF_SMCBCR1 0x04
-#define EP93XX_OFF_SMCBCR2 0x08
-#define EP93XX_OFF_SMCBCR3 0x0C
-#define EP93XX_OFF_SMCBCR6 0x18
-#define EP93XX_OFF_SMCBCR7 0x1C
-
-#define SMC_BCR_IDCY_SHIFT 0
-#define SMC_BCR_WST1_SHIFT 5
-#define SMC_BCR_BLE (1 << 10)
-#define SMC_BCR_WST2_SHIFT 11
-#define SMC_BCR_MW_SHIFT 28
-
-/*
- * 0x80090000 - 0x8009FFFF: Boot ROM
- */
-
-/*
- * 0x800A0000 - 0x800AFFFF: IDE interface
- */
-
-/*
- * 0x800B0000 - 0x800BFFFF: VIC1
- */
-
-/*
- * 0x800C0000 - 0x800CFFFF: VIC2
- */
-
-/*
- * 0x800D0000 - 0x800FFFFF: Reserved
- */
-
-/*
- * 0x80800000 - 0x8080FFFF: Reserved
- */
-
-/*
- * 0x80810000 - 0x8081FFFF: Timers
- */
-#define TIMER_OFFSET 0x010000
-#define TIMER_BASE (EP93XX_APB_BASE | TIMER_OFFSET)
-
-#ifndef __ASSEMBLY__
-struct timer {
- uint32_t load;
- uint32_t value;
- uint32_t control;
- uint32_t clear;
-};
-
-struct timer4 {
- uint32_t value_low;
- uint32_t value_high;
-};
-
-struct timer_regs {
- struct timer timer1;
- uint32_t reserved0[4];
- struct timer timer2;
- uint32_t reserved1[12];
- struct timer4 timer4;
- uint32_t reserved2[6];
- struct timer timer3;
-};
-#endif
-
-/*
- * 0x80820000 - 0x8082FFFF: I2S
- */
-#define I2S_OFFSET 0x020000
-#define I2S_BASE (EP93XX_APB_BASE | I2S_OFFSET)
-
-/*
- * 0x80830000 - 0x8083FFFF: Security
- */
-#define SECURITY_OFFSET 0x030000
-#define SECURITY_BASE (EP93XX_APB_BASE | SECURITY_OFFSET)
-
-#define EXTENSIONID (SECURITY_BASE + 0x2714)
-
-/*
- * 0x80840000 - 0x8084FFFF: GPIO
- */
-#define GPIO_OFFSET 0x040000
-#define GPIO_BASE (EP93XX_APB_BASE | GPIO_OFFSET)
-
-#ifndef __ASSEMBLY__
-struct gpio_int {
- uint32_t inttype1;
- uint32_t inttype2;
- uint32_t eoi;
- uint32_t inten;
- uint32_t intsts;
- uint32_t rawintsts;
- uint32_t db;
-};
-
-struct gpio_regs {
- uint32_t padr;
- uint32_t pbdr;
- uint32_t pcdr;
- uint32_t pddr;
- uint32_t paddr;
- uint32_t pbddr;
- uint32_t pcddr;
- uint32_t pdddr;
- uint32_t pedr;
- uint32_t peddr;
- uint32_t reserved0[2];
- uint32_t pfdr;
- uint32_t pfddr;
- uint32_t pgdr;
- uint32_t pgddr;
- uint32_t phdr;
- uint32_t phddr;
- uint32_t reserved1;
- uint32_t finttype1;
- uint32_t finttype2;
- uint32_t reserved2;
- struct gpio_int pfint;
- uint32_t reserved3[10];
- struct gpio_int paint;
- struct gpio_int pbint;
- uint32_t eedrive;
-};
-#endif
-
-#define EP93XX_LED_DATA 0x80840020
-#define EP93XX_LED_GREEN_ON 0x0001
-#define EP93XX_LED_RED_ON 0x0002
-
-#define EP93XX_LED_DDR 0x80840024
-#define EP93XX_LED_GREEN_ENABLE 0x0001
-#define EP93XX_LED_RED_ENABLE 0x00020000
-
-/*
- * 0x80850000 - 0x8087FFFF: Reserved
- */
-
-/*
- * 0x80880000 - 0x8088FFFF: AAC
- */
-#define AAC_OFFSET 0x080000
-#define AAC_BASE (EP93XX_APB_BASE | AAC_OFFSET)
-
-/*
- * 0x80890000 - 0x8089FFFF: Reserved
- */
-
-/*
- * 0x808A0000 - 0x808AFFFF: SPI
- */
-#define SPI_OFFSET 0x0A0000
-#define SPI_BASE (EP93XX_APB_BASE | SPI_OFFSET)
-
-/*
- * 0x808B0000 - 0x808BFFFF: IrDA
- */
-#define IRDA_OFFSET 0x0B0000
-#define IRDA_BASE (EP93XX_APB_BASE | IRDA_OFFSET)
-
-/*
- * 0x808C0000 - 0x808CFFFF: UART1
- */
-#define UART1_OFFSET 0x0C0000
-#define UART1_BASE (EP93XX_APB_BASE | UART1_OFFSET)
-
-/*
- * 0x808D0000 - 0x808DFFFF: UART2
- */
-#define UART2_OFFSET 0x0D0000
-#define UART2_BASE (EP93XX_APB_BASE | UART2_OFFSET)
-
-/*
- * 0x808E0000 - 0x808EFFFF: UART3
- */
-#define UART3_OFFSET 0x0E0000
-#define UART3_BASE (EP93XX_APB_BASE | UART3_OFFSET)
-
-/*
- * 0x808F0000 - 0x808FFFFF: Key Matrix
- */
-#define KEY_OFFSET 0x0F0000
-#define KEY_BASE (EP93XX_APB_BASE | KEY_OFFSET)
-
-/*
- * 0x80900000 - 0x8090FFFF: Touchscreen
- */
-#define TOUCH_OFFSET 0x900000
-#define TOUCH_BASE (EP93XX_APB_BASE | TOUCH_OFFSET)
-
-/*
- * 0x80910000 - 0x8091FFFF: Pulse Width Modulation
- */
-#define PWM_OFFSET 0x910000
-#define PWM_BASE (EP93XX_APB_BASE | PWM_OFFSET)
-
-/*
- * 0x80920000 - 0x8092FFFF: Real time clock
- */
-#define RTC_OFFSET 0x920000
-#define RTC_BASE (EP93XX_APB_BASE | RTC_OFFSET)
-
-/*
- * 0x80930000 - 0x8093FFFF: Syscon
- */
-#define SYSCON_OFFSET 0x930000
-#define SYSCON_BASE (EP93XX_APB_BASE | SYSCON_OFFSET)
-
-/* Security */
-#define SECURITY_EXTENSIONID 0x80832714
-
-#ifndef __ASSEMBLY__
-struct syscon_regs {
- uint32_t pwrsts;
- uint32_t pwrcnt;
- uint32_t halt;
- uint32_t stby;
- uint32_t reserved0[2];
- uint32_t teoi;
- uint32_t stfclr;
- uint32_t clkset1;
- uint32_t clkset2;
- uint32_t reserved1[6];
- uint32_t scratch0;
- uint32_t scratch1;
- uint32_t reserved2[2];
- uint32_t apbwait;
- uint32_t bustmstrarb;
- uint32_t bootmodeclr;
- uint32_t reserved3[9];
- uint32_t devicecfg;
- uint32_t vidclkdiv;
- uint32_t mirclkdiv;
- uint32_t i2sclkdiv;
- uint32_t keytchclkdiv;
- uint32_t chipid;
- uint32_t reserved4;
- uint32_t syscfg;
- uint32_t reserved5[8];
- uint32_t sysswlock;
-};
-#else
-#define SYSCON_SCRATCH0 (SYSCON_BASE + 0x0040)
-#endif
-
-#define SYSCON_OFF_CLKSET1 0x0020
-#define SYSCON_OFF_SYSCFG 0x009c
-
-#define SYSCON_PWRCNT_UART_BAUD (1 << 29)
-#define SYSCON_PWRCNT_USH_EN (1 << 28)
-
-#define SYSCON_CLKSET_PLL_X2IPD_SHIFT 0
-#define SYSCON_CLKSET_PLL_X2FBD2_SHIFT 5
-#define SYSCON_CLKSET_PLL_X1FBD1_SHIFT 11
-#define SYSCON_CLKSET_PLL_PS_SHIFT 16
-#define SYSCON_CLKSET1_PCLK_DIV_SHIFT 18
-#define SYSCON_CLKSET1_HCLK_DIV_SHIFT 20
-#define SYSCON_CLKSET1_NBYP1 (1 << 23)
-#define SYSCON_CLKSET1_FCLK_DIV_SHIFT 25
-
-#define SYSCON_CLKSET2_PLL2_EN (1 << 18)
-#define SYSCON_CLKSET2_NBYP2 (1 << 19)
-#define SYSCON_CLKSET2_USB_DIV_SHIFT 28
-
-#define SYSCON_CHIPID_REV_MASK 0xF0000000
-#define SYSCON_DEVICECFG_SWRST (1 << 31)
-
-#define SYSCON_SYSCFG_LASDO 0x00000020
-
-/*
- * 0x80930000 - 0x8093FFFF: Watchdog Timer
- */
-#define WATCHDOG_OFFSET 0x940000
-#define WATCHDOG_BASE (EP93XX_APB_BASE | WATCHDOG_OFFSET)
-
-/*
- * 0x80950000 - 0x9000FFFF: Reserved
- */
-
-/*
- * During low_level init we store memory layout in memory at specific location
- */
-#define UBOOT_MEMORYCNF_BANK_SIZE 0x2000
-#define UBOOT_MEMORYCNF_BANK_MASK 0x2004
-#define UBOOT_MEMORYCNF_BANK_COUNT 0x2008
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 69570bebb447..16733d2d1f8b 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -22,7 +22,6 @@ obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o
obj-$(CONFIG_E1000) += e1000.o
obj-$(CONFIG_E1000_SPI) += e1000_spi.o
obj-$(CONFIG_EEPRO100) += eepro100.o
-obj-$(CONFIG_EP93XX) += ep93xx_eth.o
obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_ETH_DESIGNWARE) += designware.o
obj-$(CONFIG_ETH_DESIGNWARE_MESON8B) += dwmac_meson8b.o
diff --git a/drivers/net/ep93xx_eth.c b/drivers/net/ep93xx_eth.c
deleted file mode 100644
index 9f8df7de0609..000000000000
--- a/drivers/net/ep93xx_eth.c
+++ /dev/null
@@ -1,654 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Cirrus Logic EP93xx ethernet MAC / MII driver.
- *
- * Copyright (C) 2010, 2009
- * Matthias Kaehlcke <matthias at kaehlcke.net>
- *
- * Copyright (C) 2004, 2005
- * Cory T. Tusar, Videon Central, Inc., <ctusar at videon-central.com>
- *
- * Based on the original eth.[ch] Cirrus Logic EP93xx Rev D. Ethernet Driver,
- * which is
- *
- * (C) Copyright 2002 2003
- * Adam Bezanson, Network Audio Technologies, Inc.
- * <bezanson at netaudiotech.com>
- */
-
-#include <command.h>
-#include <common.h>
-#include <log.h>
-#include <net.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
-#include <malloc.h>
-#include <miiphy.h>
-#include <linux/bug.h>
-#include <linux/types.h>
-#include "ep93xx_eth.h"
-
-#define GET_PRIV(eth_dev) ((struct ep93xx_priv *)(eth_dev)->priv)
-#define GET_REGS(eth_dev) (GET_PRIV(eth_dev)->regs)
-
-/* ep93xx_miiphy ops forward declarations */
-static int ep93xx_miiphy_read(struct mii_dev *bus, int addr, int devad,
- int reg);
-static int ep93xx_miiphy_write(struct mii_dev *bus, int addr, int devad,
- int reg, u16 value);
-
-#if defined(EP93XX_MAC_DEBUG)
-/**
- * Dump ep93xx_mac values to the terminal.
- */
-static void dump_dev(struct eth_device *dev)
-{
- struct ep93xx_priv *priv = GET_PRIV(dev);
- int i;
-
- printf("\ndump_dev()\n");
- printf(" rx_dq.base %p\n", priv->rx_dq.base);
- printf(" rx_dq.current %p\n", priv->rx_dq.current);
- printf(" rx_dq.end %p\n", priv->rx_dq.end);
- printf(" rx_sq.base %p\n", priv->rx_sq.base);
- printf(" rx_sq.current %p\n", priv->rx_sq.current);
- printf(" rx_sq.end %p\n", priv->rx_sq.end);
-
- for (i = 0; i < NUMRXDESC; i++)
- printf(" rx_buffer[%2.d] %p\n", i, net_rx_packets[i]);
-
- printf(" tx_dq.base %p\n", priv->tx_dq.base);
- printf(" tx_dq.current %p\n", priv->tx_dq.current);
- printf(" tx_dq.end %p\n", priv->tx_dq.end);
- printf(" tx_sq.base %p\n", priv->tx_sq.base);
- printf(" tx_sq.current %p\n", priv->tx_sq.current);
- printf(" tx_sq.end %p\n", priv->tx_sq.end);
-}
-
-/**
- * Dump all RX status queue entries to the terminal.
- */
-static void dump_rx_status_queue(struct eth_device *dev)
-{
- struct ep93xx_priv *priv = GET_PRIV(dev);
- int i;
-
- printf("\ndump_rx_status_queue()\n");
- printf(" descriptor address word1 word2\n");
- for (i = 0; i < NUMRXDESC; i++) {
- printf(" [ %p ] %08X %08X\n",
- priv->rx_sq.base + i,
- (priv->rx_sq.base + i)->word1,
- (priv->rx_sq.base + i)->word2);
- }
-}
-
-/**
- * Dump all RX descriptor queue entries to the terminal.
- */
-static void dump_rx_descriptor_queue(struct eth_device *dev)
-{
- struct ep93xx_priv *priv = GET_PRIV(dev);
- int i;
-
- printf("\ndump_rx_descriptor_queue()\n");
- printf(" descriptor address word1 word2\n");
- for (i = 0; i < NUMRXDESC; i++) {
- printf(" [ %p ] %08X %08X\n",
- priv->rx_dq.base + i,
- (priv->rx_dq.base + i)->word1,
- (priv->rx_dq.base + i)->word2);
- }
-}
-
-/**
- * Dump all TX descriptor queue entries to the terminal.
- */
-static void dump_tx_descriptor_queue(struct eth_device *dev)
-{
- struct ep93xx_priv *priv = GET_PRIV(dev);
- int i;
-
- printf("\ndump_tx_descriptor_queue()\n");
- printf(" descriptor address word1 word2\n");
- for (i = 0; i < NUMTXDESC; i++) {
- printf(" [ %p ] %08X %08X\n",
- priv->tx_dq.base + i,
- (priv->tx_dq.base + i)->word1,
- (priv->tx_dq.base + i)->word2);
- }
-}
-
-/**
- * Dump all TX status queue entries to the terminal.
- */
-static void dump_tx_status_queue(struct eth_device *dev)
-{
- struct ep93xx_priv *priv = GET_PRIV(dev);
- int i;
-
- printf("\ndump_tx_status_queue()\n");
- printf(" descriptor address word1\n");
- for (i = 0; i < NUMTXDESC; i++) {
- printf(" [ %p ] %08X\n",
- priv->rx_sq.base + i,
- (priv->rx_sq.base + i)->word1);
- }
-}
-#else
-#define dump_dev(x)
-#define dump_rx_descriptor_queue(x)
-#define dump_rx_status_queue(x)
-#define dump_tx_descriptor_queue(x)
-#define dump_tx_status_queue(x)
-#endif /* defined(EP93XX_MAC_DEBUG) */
-
-/**
- * Reset the EP93xx MAC by twiddling the soft reset bit and spinning until
- * it's cleared.
- */
-static void ep93xx_mac_reset(struct eth_device *dev)
-{
- struct mac_regs *mac = GET_REGS(dev);
- uint32_t value;
-
- debug("+ep93xx_mac_reset");
-
- value = readl(&mac->selfctl);
- value |= SELFCTL_RESET;
- writel(value, &mac->selfctl);
-
- while (readl(&mac->selfctl) & SELFCTL_RESET)
- ; /* noop */
-
- debug("-ep93xx_mac_reset");
-}
-
-/* Eth device open */
-static int ep93xx_eth_open(struct eth_device *dev, struct bd_info *bd)
-{
- struct ep93xx_priv *priv = GET_PRIV(dev);
- struct mac_regs *mac = GET_REGS(dev);
- uchar *mac_addr = dev->enetaddr;
- int i;
-
- debug("+ep93xx_eth_open");
-
- /* Reset the MAC */
- ep93xx_mac_reset(dev);
-
- /* Reset the descriptor queues' current and end address values */
- priv->tx_dq.current = priv->tx_dq.base;
- priv->tx_dq.end = (priv->tx_dq.base + NUMTXDESC);
-
- priv->tx_sq.current = priv->tx_sq.base;
- priv->tx_sq.end = (priv->tx_sq.base + NUMTXDESC);
-
- priv->rx_dq.current = priv->rx_dq.base;
- priv->rx_dq.end = (priv->rx_dq.base + NUMRXDESC);
-
- priv->rx_sq.current = priv->rx_sq.base;
- priv->rx_sq.end = (priv->rx_sq.base + NUMRXDESC);
-
- /*
- * Set the transmit descriptor and status queues' base address,
- * current address, and length registers. Set the maximum frame
- * length and threshold. Enable the transmit descriptor processor.
- */
- writel((uint32_t)priv->tx_dq.base, &mac->txdq.badd);
- writel((uint32_t)priv->tx_dq.base, &mac->txdq.curadd);
- writel(sizeof(struct tx_descriptor) * NUMTXDESC, &mac->txdq.blen);
-
- writel((uint32_t)priv->tx_sq.base, &mac->txstsq.badd);
- writel((uint32_t)priv->tx_sq.base, &mac->txstsq.curadd);
- writel(sizeof(struct tx_status) * NUMTXDESC, &mac->txstsq.blen);
-
- writel(0x00040000, &mac->txdthrshld);
- writel(0x00040000, &mac->txststhrshld);
-
- writel((TXSTARTMAX << 0) | (PKTSIZE_ALIGN << 16), &mac->maxfrmlen);
- writel(BMCTL_TXEN, &mac->bmctl);
-
- /*
- * Set the receive descriptor and status queues' base address,
- * current address, and length registers. Enable the receive
- * descriptor processor.
- */
- writel((uint32_t)priv->rx_dq.base, &mac->rxdq.badd);
- writel((uint32_t)priv->rx_dq.base, &mac->rxdq.curadd);
- writel(sizeof(struct rx_descriptor) * NUMRXDESC, &mac->rxdq.blen);
-
- writel((uint32_t)priv->rx_sq.base, &mac->rxstsq.badd);
- writel((uint32_t)priv->rx_sq.base, &mac->rxstsq.curadd);
- writel(sizeof(struct rx_status) * NUMRXDESC, &mac->rxstsq.blen);
-
- writel(0x00040000, &mac->rxdthrshld);
-
- writel(BMCTL_RXEN, &mac->bmctl);
-
- writel(0x00040000, &mac->rxststhrshld);
-
- /* Wait until the receive descriptor processor is active */
- while (!(readl(&mac->bmsts) & BMSTS_RXACT))
- ; /* noop */
-
- /*
- * Initialize the RX descriptor queue. Clear the TX descriptor queue.
- * Clear the RX and TX status queues. Enqueue the RX descriptor and
- * status entries to the MAC.
- */
- for (i = 0; i < NUMRXDESC; i++) {
- /* set buffer address */
- (priv->rx_dq.base + i)->word1 = (uint32_t)net_rx_packets[i];
-
- /* set buffer length, clear buffer index and NSOF */
- (priv->rx_dq.base + i)->word2 = PKTSIZE_ALIGN;
- }
-
- memset(priv->tx_dq.base, 0,
- (sizeof(struct tx_descriptor) * NUMTXDESC));
- memset(priv->rx_sq.base, 0,
- (sizeof(struct rx_status) * NUMRXDESC));
- memset(priv->tx_sq.base, 0,
- (sizeof(struct tx_status) * NUMTXDESC));
-
- writel(NUMRXDESC, &mac->rxdqenq);
- writel(NUMRXDESC, &mac->rxstsqenq);
-
- /* Set the primary MAC address */
- writel(AFP_IAPRIMARY, &mac->afp);
- writel(mac_addr[0] | (mac_addr[1] << 8) |
- (mac_addr[2] << 16) | (mac_addr[3] << 24),
- &mac->indad);
- writel(mac_addr[4] | (mac_addr[5] << 8), &mac->indad_upper);
-
- /* Turn on RX and TX */
- writel(RXCTL_IA0 | RXCTL_BA | RXCTL_SRXON |
- RXCTL_RCRCA | RXCTL_MA, &mac->rxctl);
- writel(TXCTL_STXON, &mac->txctl);
-
- /* Dump data structures if we're debugging */
- dump_dev(dev);
- dump_rx_descriptor_queue(dev);
- dump_rx_status_queue(dev);
- dump_tx_descriptor_queue(dev);
- dump_tx_status_queue(dev);
-
- debug("-ep93xx_eth_open");
-
- return 1;
-}
-
-/**
- * Halt EP93xx MAC transmit and receive by clearing the TxCTL and RxCTL
- * registers.
- */
-static void ep93xx_eth_close(struct eth_device *dev)
-{
- struct mac_regs *mac = GET_REGS(dev);
-
- debug("+ep93xx_eth_close");
-
- writel(0x00000000, &mac->rxctl);
- writel(0x00000000, &mac->txctl);
-
- debug("-ep93xx_eth_close");
-}
-
-/**
- * Copy a frame of data from the MAC into the protocol layer for further
- * processing.
- */
-static int ep93xx_eth_rcv_packet(struct eth_device *dev)
-{
- struct mac_regs *mac = GET_REGS(dev);
- struct ep93xx_priv *priv = GET_PRIV(dev);
- int len = -1;
-
- debug("+ep93xx_eth_rcv_packet");
-
- if (RX_STATUS_RFP(priv->rx_sq.current)) {
- if (RX_STATUS_RWE(priv->rx_sq.current)) {
- /*
- * We have a good frame. Extract the frame's length
- * from the current rx_status_queue entry, and copy
- * the frame's data into net_rx_packets[] of the
- * protocol stack. We track the total number of
- * bytes in the frame (nbytes_frame) which will be
- * used when we pass the data off to the protocol
- * layer via net_process_received_packet().
- */
- len = RX_STATUS_FRAME_LEN(priv->rx_sq.current);
-
- net_process_received_packet(
- (uchar *)priv->rx_dq.current->word1, len);
-
- debug("reporting %d bytes...\n", len);
- } else {
- /* Do we have an erroneous packet? */
- pr_err("packet rx error, status %08X %08X",
- priv->rx_sq.current->word1,
- priv->rx_sq.current->word2);
- dump_rx_descriptor_queue(dev);
- dump_rx_status_queue(dev);
- }
-
- /*
- * Clear the associated status queue entry, and
- * increment our current pointers to the next RX
- * descriptor and status queue entries (making sure
- * we wrap properly).
- */
- memset((void *)priv->rx_sq.current, 0,
- sizeof(struct rx_status));
-
- priv->rx_sq.current++;
- if (priv->rx_sq.current >= priv->rx_sq.end)
- priv->rx_sq.current = priv->rx_sq.base;
-
- priv->rx_dq.current++;
- if (priv->rx_dq.current >= priv->rx_dq.end)
- priv->rx_dq.current = priv->rx_dq.base;
-
- /*
- * Finally, return the RX descriptor and status entries
- * back to the MAC engine, and loop again, checking for
- * more descriptors to process.
- */
- writel(1, &mac->rxdqenq);
- writel(1, &mac->rxstsqenq);
- } else {
- len = 0;
- }
-
- debug("-ep93xx_eth_rcv_packet %d", len);
- return len;
-}
-
-/**
- * Send a block of data via ethernet.
- */
-static int ep93xx_eth_send_packet(struct eth_device *dev,
- void * const packet, int const length)
-{
- struct mac_regs *mac = GET_REGS(dev);
- struct ep93xx_priv *priv = GET_PRIV(dev);
- int ret = -1;
-
- debug("+ep93xx_eth_send_packet");
-
- /* Parameter check */
- BUG_ON(packet == NULL);
-
- /*
- * Initialize the TX descriptor queue with the new packet's info.
- * Clear the associated status queue entry. Enqueue the packet
- * to the MAC for transmission.
- */
-
- /* set buffer address */
- priv->tx_dq.current->word1 = (uint32_t)packet;
-
- /* set buffer length and EOF bit */
- priv->tx_dq.current->word2 = length | TX_DESC_EOF;
-
- /* clear tx status */
- priv->tx_sq.current->word1 = 0;
-
- /* enqueue the TX descriptor */
- writel(1, &mac->txdqenq);
-
- /* wait for the frame to become processed */
- while (!TX_STATUS_TXFP(priv->tx_sq.current))
- ; /* noop */
-
- if (!TX_STATUS_TXWE(priv->tx_sq.current)) {
- pr_err("packet tx error, status %08X",
- priv->tx_sq.current->word1);
- dump_tx_descriptor_queue(dev);
- dump_tx_status_queue(dev);
-
- /* TODO: Add better error handling? */
- goto eth_send_out;
- }
-
- ret = 0;
- /* Fall through */
-
-eth_send_out:
- debug("-ep93xx_eth_send_packet %d", ret);
- return ret;
-}
-
-#if defined(CONFIG_MII)
-int ep93xx_miiphy_initialize(struct bd_info * const bd)
-{
- int retval;
- struct mii_dev *mdiodev = mdio_alloc();
- if (!mdiodev)
- return -ENOMEM;
- strlcpy(mdiodev->name, "ep93xx_eth0", MDIO_NAME_LEN);
- mdiodev->read = ep93xx_miiphy_read;
- mdiodev->write = ep93xx_miiphy_write;
-
- retval = mdio_register(mdiodev);
- if (retval < 0)
- return retval;
- return 0;
-}
-#endif
-
-/**
- * Initialize the EP93xx MAC. The MAC hardware is reset. Buffers are
- * allocated, if necessary, for the TX and RX descriptor and status queues,
- * as well as for received packets. The EP93XX MAC hardware is initialized.
- * Transmit and receive operations are enabled.
- */
-int ep93xx_eth_initialize(u8 dev_num, int base_addr)
-{
- int ret = -1;
- struct eth_device *dev;
- struct ep93xx_priv *priv;
-
- debug("+ep93xx_eth_initialize");
-
- priv = malloc(sizeof(*priv));
- if (!priv) {
- pr_err("malloc() failed");
- goto eth_init_failed_0;
- }
- memset(priv, 0, sizeof(*priv));
-
- priv->regs = (struct mac_regs *)base_addr;
-
- priv->tx_dq.base = calloc(NUMTXDESC,
- sizeof(struct tx_descriptor));
- if (priv->tx_dq.base == NULL) {
- pr_err("calloc() failed");
- goto eth_init_failed_1;
- }
-
- priv->tx_sq.base = calloc(NUMTXDESC,
- sizeof(struct tx_status));
- if (priv->tx_sq.base == NULL) {
- pr_err("calloc() failed");
- goto eth_init_failed_2;
- }
-
- priv->rx_dq.base = calloc(NUMRXDESC,
- sizeof(struct rx_descriptor));
- if (priv->rx_dq.base == NULL) {
- pr_err("calloc() failed");
- goto eth_init_failed_3;
- }
-
- priv->rx_sq.base = calloc(NUMRXDESC,
- sizeof(struct rx_status));
- if (priv->rx_sq.base == NULL) {
- pr_err("calloc() failed");
- goto eth_init_failed_4;
- }
-
- dev = malloc(sizeof *dev);
- if (dev == NULL) {
- pr_err("malloc() failed");
- goto eth_init_failed_5;
- }
- memset(dev, 0, sizeof *dev);
-
- dev->iobase = base_addr;
- dev->priv = priv;
- dev->init = ep93xx_eth_open;
- dev->halt = ep93xx_eth_close;
- dev->send = ep93xx_eth_send_packet;
- dev->recv = ep93xx_eth_rcv_packet;
-
- sprintf(dev->name, "ep93xx_eth-%hu", dev_num);
-
- eth_register(dev);
-
- /* Done! */
- ret = 1;
- goto eth_init_done;
-
-eth_init_failed_5:
- free(priv->rx_sq.base);
- /* Fall through */
-
-eth_init_failed_4:
- free(priv->rx_dq.base);
- /* Fall through */
-
-eth_init_failed_3:
- free(priv->tx_sq.base);
- /* Fall through */
-
-eth_init_failed_2:
- free(priv->tx_dq.base);
- /* Fall through */
-
-eth_init_failed_1:
- free(priv);
- /* Fall through */
-
-eth_init_failed_0:
- /* Fall through */
-
-eth_init_done:
- debug("-ep93xx_eth_initialize %d", ret);
- return ret;
-}
-
-#if defined(CONFIG_MII)
-
-/**
- * Maximum MII address we support
- */
-#define MII_ADDRESS_MAX 31
-
-/**
- * Maximum MII register address we support
- */
-#define MII_REGISTER_MAX 31
-
-/**
- * Read a 16-bit value from an MII register.
- */
-static int ep93xx_miiphy_read(struct mii_dev *bus, int addr, int devad,
- int reg)
-{
- unsigned short value = 0;
- struct mac_regs *mac = (struct mac_regs *)MAC_BASE;
- int ret = -1;
- uint32_t self_ctl;
-
- debug("+ep93xx_miiphy_read");
-
- /* Parameter checks */
- BUG_ON(bus->name == NULL);
- BUG_ON(addr > MII_ADDRESS_MAX);
- BUG_ON(reg > MII_REGISTER_MAX);
-
- /*
- * Save the current SelfCTL register value. Set MAC to suppress
- * preamble bits. Wait for any previous MII command to complete
- * before issuing the new command.
- */
- self_ctl = readl(&mac->selfctl);
-#if defined(CONFIG_MII_SUPPRESS_PREAMBLE)
- writel(self_ctl & ~(1 << 8), &mac->selfctl);
-#endif /* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */
-
- while (readl(&mac->miists) & MIISTS_BUSY)
- ; /* noop */
-
- /*
- * Issue the MII 'read' command. Wait for the command to complete.
- * Read the MII data value.
- */
- writel(MIICMD_OPCODE_READ | ((uint32_t)addr << 5) | (uint32_t)reg,
- &mac->miicmd);
- while (readl(&mac->miists) & MIISTS_BUSY)
- ; /* noop */
-
- value = (unsigned short)readl(&mac->miidata);
-
- /* Restore the saved SelfCTL value and return. */
- writel(self_ctl, &mac->selfctl);
-
- ret = 0;
- /* Fall through */
-
- debug("-ep93xx_miiphy_read");
- if (ret < 0)
- return ret;
- return value;
-}
-
-/**
- * Write a 16-bit value to an MII register.
- */
-static int ep93xx_miiphy_write(struct mii_dev *bus, int addr, int devad,
- int reg, u16 value)
-{
- struct mac_regs *mac = (struct mac_regs *)MAC_BASE;
- int ret = -1;
- uint32_t self_ctl;
-
- debug("+ep93xx_miiphy_write");
-
- /* Parameter checks */
- BUG_ON(bus->name == NULL);
- BUG_ON(addr > MII_ADDRESS_MAX);
- BUG_ON(reg > MII_REGISTER_MAX);
-
- /*
- * Save the current SelfCTL register value. Set MAC to suppress
- * preamble bits. Wait for any previous MII command to complete
- * before issuing the new command.
- */
- self_ctl = readl(&mac->selfctl);
-#if defined(CONFIG_MII_SUPPRESS_PREAMBLE)
- writel(self_ctl & ~(1 << 8), &mac->selfctl);
-#endif /* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */
-
- while (readl(&mac->miists) & MIISTS_BUSY)
- ; /* noop */
-
- /* Issue the MII 'write' command. Wait for the command to complete. */
- writel((uint32_t)value, &mac->miidata);
- writel(MIICMD_OPCODE_WRITE | ((uint32_t)addr << 5) | (uint32_t)reg,
- &mac->miicmd);
- while (readl(&mac->miists) & MIISTS_BUSY)
- ; /* noop */
-
- /* Restore the saved SelfCTL value and return. */
- writel(self_ctl, &mac->selfctl);
-
- ret = 0;
- /* Fall through */
-
- debug("-ep93xx_miiphy_write");
- return ret;
-}
-#endif /* defined(CONFIG_MII) */
diff --git a/drivers/net/ep93xx_eth.h b/drivers/net/ep93xx_eth.h
deleted file mode 100644
index 074fe25f347c..000000000000
--- a/drivers/net/ep93xx_eth.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2009 Matthias Kaehlcke <matthias at kaehlcke.net>
- *
- * Copyright (C) 2004, 2005
- * Cory T. Tusar, Videon Central, Inc., <ctusar at videon-central.com>
- */
-
-#ifndef _EP93XX_ETH_H
-#define _EP93XX_ETH_H
-
-#include <net.h>
-
-/**
- * #define this to dump device status and queue info during initialization and
- * following errors.
- */
-#undef EP93XX_MAC_DEBUG
-
-/**
- * Number of descriptor and status entries in our RX queues.
- * It must be power of 2 !
- */
-#define NUMRXDESC PKTBUFSRX
-
-/**
- * Number of descriptor and status entries in our TX queues.
- */
-#define NUMTXDESC 1
-
-/**
- * 944 = (1024 - 64) - 16, Fifo size - Minframesize - 16 (Chip FACT)
- */
-#define TXSTARTMAX 944
-
-/**
- * Receive descriptor queue entry
- */
-struct rx_descriptor {
- uint32_t word1;
- uint32_t word2;
-};
-
-/**
- * Receive status queue entry
- */
-struct rx_status {
- uint32_t word1;
- uint32_t word2;
-};
-
-#define RX_STATUS_RWE(rx_status) ((rx_status->word1 >> 30) & 0x01)
-#define RX_STATUS_RFP(rx_status) ((rx_status->word1 >> 31) & 0x01)
-#define RX_STATUS_FRAME_LEN(rx_status) (rx_status->word2 & 0xFFFF)
-
-/**
- * Transmit descriptor queue entry
- */
-struct tx_descriptor {
- uint32_t word1;
- uint32_t word2;
-};
-
-#define TX_DESC_EOF (1 << 31)
-
-/**
- * Transmit status queue entry
- */
-struct tx_status {
- uint32_t word1;
-};
-
-#define TX_STATUS_TXWE(tx_status) (((tx_status)->word1 >> 30) & 0x01)
-#define TX_STATUS_TXFP(tx_status) (((tx_status)->word1 >> 31) & 0x01)
-
-/**
- * Transmit descriptor queue
- */
-struct tx_descriptor_queue {
- struct tx_descriptor *base;
- struct tx_descriptor *current;
- struct tx_descriptor *end;
-};
-
-/**
- * Transmit status queue
- */
-struct tx_status_queue {
- struct tx_status *base;
- volatile struct tx_status *current;
- struct tx_status *end;
-};
-
-/**
- * Receive descriptor queue
- */
-struct rx_descriptor_queue {
- struct rx_descriptor *base;
- struct rx_descriptor *current;
- struct rx_descriptor *end;
-};
-
-/**
- * Receive status queue
- */
-struct rx_status_queue {
- struct rx_status *base;
- volatile struct rx_status *current;
- struct rx_status *end;
-};
-
-/**
- * EP93xx MAC private data structure
- */
-struct ep93xx_priv {
- struct rx_descriptor_queue rx_dq;
- struct rx_status_queue rx_sq;
- void *rx_buffer[NUMRXDESC];
-
- struct tx_descriptor_queue tx_dq;
- struct tx_status_queue tx_sq;
-
- struct mac_regs *regs;
-};
-
-#endif
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index eb6fe9f6b30f..a4472da9f182 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_USB_ATMEL) += ohci-at91.o
obj-$(CONFIG_USB_OHCI_DA8XX) += ohci-da8xx.o
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
obj-$(CONFIG_USB_SL811HS) += sl811-hcd.o
-obj-$(CONFIG_USB_OHCI_EP93XX) += ohci-ep93xx.o
obj-$(CONFIG_USB_OHCI_LPC32XX) += ohci-lpc32xx.o
obj-$(CONFIG_USB_OHCI_PCI) += ohci-pci.o
obj-$(CONFIG_USB_OHCI_GENERIC) += ohci-generic.o
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
deleted file mode 100644
index 9654fa2996f8..000000000000
--- a/drivers/usb/host/ohci-ep93xx.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2013
- * Sergey Kostanbaev < sergey.kostanbaev <at> fairwaves.ru >
- */
-
-#include <config.h>
-#include <common.h>
-
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-#include <asm/io.h>
-#include <asm/arch/ep93xx.h>
-
-int usb_cpu_init(void)
-{
- struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
- unsigned long pwr = readl(&syscon->pwrcnt);
- writel(pwr | SYSCON_PWRCNT_USH_EN, &syscon->pwrcnt);
-
- return 0;
-}
-
-int usb_cpu_stop(void)
-{
- struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
- unsigned long pwr = readl(&syscon->pwrcnt);
- writel(pwr & ~SYSCON_PWRCNT_USH_EN, &syscon->pwrcnt);
-
- return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
- return usb_cpu_stop();
-}
-
-#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
--
2.25.1
More information about the U-Boot
mailing list