[PATCH 3/5] imx8mm-cl-iot-gate: Retrieve the MAC address from EEPROM

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

Currently the eth0 MAC address is randomly assigned.

Retrieve the MAC address from EEPROM.

Signed-off-by: Fabio Estevam <<festevam at denx.de>
---
 arch/arm/dts/imx8mm-cl-iot-gate.dts           | 12 ++++-
 .../imx8mm-cl-iot-gate/imx8mm-cl-iot-gate.c   | 51 +++++++++++++++++++
 configs/imx8mm-cl-iot-gate_defconfig          |  2 +
 3 files changed, 64 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/imx8mm-cl-iot-gate.dts b/arch/arm/dts/imx8mm-cl-iot-gate.dts
index 62e8d0394933..425701204a0c 100644
--- a/arch/arm/dts/imx8mm-cl-iot-gate.dts
+++ b/arch/arm/dts/imx8mm-cl-iot-gate.dts
@@ -17,6 +17,11 @@
 		stdout-path = &uart3;
 	};
 
+	aliases {
+		eeprom0 = &i2c_eeprom0;
+		eeprom1 = &i2c_eeprom1;
+	};
+
 	reg_vusb_5v: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		regulator-name = "VUSB_5V";
@@ -79,7 +84,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	eeprom at 54 {
+	i2c_eeprom0: eeprom at 54 {
 		  compatible = "atmel,24c08";
 		  reg = <0x54>;
 		  pagesize = <16>;
@@ -92,6 +97,11 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
+	i2c_eeprom1: eeprom at 50 {
+		  compatible = "atmel,24c08";
+		  reg = <0x50>;
+		  pagesize = <16>;
+	};
 	rtc at 69 {
 		compatible = "abracon,ab1805";
 		reg = <0x69>;
diff --git a/board/compulab/imx8mm-cl-iot-gate/imx8mm-cl-iot-gate.c b/board/compulab/imx8mm-cl-iot-gate/imx8mm-cl-iot-gate.c
index 7e2d88f449ce..779b64b140ad 100644
--- a/board/compulab/imx8mm-cl-iot-gate/imx8mm-cl-iot-gate.c
+++ b/board/compulab/imx8mm-cl-iot-gate/imx8mm-cl-iot-gate.c
@@ -12,6 +12,8 @@
 #include <init.h>
 #include <miiphy.h>
 #include <netdev.h>
+#include <i2c_eeprom.h>
+#include <i2c.h>
 
 #include <asm/arch/clock.h>
 #include <asm/arch/imx8mm_pins.h>
@@ -418,12 +420,61 @@ int extension_board_scan(struct list_head *extension_list)
         return ret;
 }
 
+static int setup_mac_address(void)
+{
+	unsigned char enetaddr[6];
+	struct udevice *dev;
+	int ret, off;
+
+	ret = eth_env_get_enetaddr("ethaddr", enetaddr);
+	if (ret)
+		return 0;
+
+	off = fdt_path_offset(gd->fdt_blob, "eeprom1");
+	if (off < 0) {
+		printf("No eeprom0 path offset found in DT\n");
+		return off;
+	}
+
+	ret = uclass_get_device_by_of_offset(UCLASS_I2C_EEPROM, off, &dev);
+	if (ret) {
+		printf("%s: Could not find EEPROM\n", __func__);
+		return ret;
+	}
+
+	ret = i2c_set_chip_offset_len(dev, 1);
+	if (ret)
+		return ret;
+
+	ret = i2c_eeprom_read(dev, 4, enetaddr, sizeof(enetaddr));
+	if (ret) {
+		printf("%s: Could not read EEPROM\n", __func__);
+		return ret;
+	}
+
+	ret = is_valid_ethaddr(enetaddr);
+	if (!ret)
+		return -EINVAL;
+
+	ret = eth_env_set_enetaddr("ethaddr", enetaddr);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 int board_late_init(void)
 {
+	int ret;
+
 	if (IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) {
 		env_set("board_name", "IOT-GATE-IMX8");
 		env_set("board_rev", "SBC-IOTMX8");
 	}
 
+	ret = setup_mac_address();
+	if (ret < 0)
+		printf("Cannot set MAC address from EEPROM\n");
+
 	return 0;
 }
diff --git a/configs/imx8mm-cl-iot-gate_defconfig b/configs/imx8mm-cl-iot-gate_defconfig
index b72f219c786c..ee171f704ed9 100644
--- a/configs/imx8mm-cl-iot-gate_defconfig
+++ b/configs/imx8mm-cl-iot-gate_defconfig
@@ -84,6 +84,8 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=2
 CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_DM_KEYBOARD=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
 CONFIG_SUPPORT_EMMC_RPMB=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_USDHC=y
-- 
2.25.1