[PATCH 2/5] imx8mm-cl-iot-gate: Retrieve the DDR type from EEPROM
Paul Liu
paul.liu at linaro.org
Mon Mar 21 21:11:44 CET 2022
Hi Tim,
It seems to me the correct logic is.
If EEPROM provides information, we use that information directly.
Pick a dram setting and test the ram if it works.
If it is not working, then that means EEPROM has wrong data or someone
clean it wrongly.
So we loop the table, try to find the correct setting, and update the
EEPROM.
Yours,
Paul
On Tue, 22 Mar 2022 at 01:31, Tim Harvey <tharvey at gateworks.com> wrote:
> On Sat, Mar 19, 2022 at 5:23 AM Fabio Estevam <festevam at gmail.com> wrote:
> >
> > From: Fabio Estevam <festevam at denx.de>
> >
> > Currently, the DDR type is retrieved by iteracting inside an array
> > of possible DDR types.
> >
> > This may take saveral attempts, which slows the overall U-Boot process
> > and does not provide a good user experience:
> >
> > U-Boot SPL 2021.07 (Feb 28 2022 - 06:39:32 +0000)
> > DDRINFO: Cfg attempt: [ 1/6 ]
> > DDRINFO(M): mr5-8 [ 0xff000010 ]
> > DDRINFO(T): mr5-8 [ 0x5000010 ]
> > resetting ...
> >
> > U-Boot SPL 2021.07 (Feb 28 2022 - 06:39:32 +0000)
> > DDRINFO: Cfg attempt: [ 2/6 ]
> > DDRINFO(M): mr5-8 [ 0xff000010 ]
> > DDRINFO(T): mr5-8 [ 0x1061010 ]
> > resetting ...
> >
> > U-Boot SPL 2021.07 (Feb 28 2022 - 06:39:32 +0000)
> > DDRINFO: Cfg attempt: [ 3/6 ]
> > DDRINFO(M): mr5-8 [ 0xff000010 ]
> > DDRINFO(T): mr5-8 [ 0xff000010 ]
> > Normal Boot
> > WDT: Not starting
> > Trying to boot from MMC2
> > NOTICE: BL31: v2.5(release):v2.5
> > NOTICE: BL31: Built : 07:12:44, Jan 24 2022
> >
> > Improve the boot time by retrieving the correct DDR information from
> > the EEPROM:
> >
> > U-Boot SPL 2022.04-rc4-00045-g6d02bc40d58c (Mar 19 2022 - 08:22:29 -0300)
> > DDRINFO(D): Kingston 4096G
> > DDRINFO(M): mr5-8 [ 0xff000010 ]
> > DDRINFO(E): mr5-8 [ 0xff000010 ]
> > Normal Boot
> > WDT: Started watchdog at 30280000 with servicing (60s timeout)
> > Trying to boot from MMC2
> > NOTICE: BL31: v2.5(release):v2.5
> > NOTICE: BL31: Built : 22:28:11, Mar 15 2022
> >
> > Based on the original code from Compulab's U-Boot.
> >
> > Tested on a imx8mm-cl-iot-gate board populated with 4GB of RAM.
> >
> > Signed-off-by: Fabio Estevam <festevam at denx.de>
> > ---
> > board/compulab/imx8mm-cl-iot-gate/ddr/ddr.c | 24 ++++++++++++++++++---
> > board/compulab/imx8mm-cl-iot-gate/ddr/ddr.h | 5 +++++
> > 2 files changed, 26 insertions(+), 3 deletions(-)
> >
> > diff --git a/board/compulab/imx8mm-cl-iot-gate/ddr/ddr.c
> b/board/compulab/imx8mm-cl-iot-gate/ddr/ddr.c
> > index 42dd0dbf18fa..5b93491923e9 100644
> > --- a/board/compulab/imx8mm-cl-iot-gate/ddr/ddr.c
> > +++ b/board/compulab/imx8mm-cl-iot-gate/ddr/ddr.c
> > @@ -22,6 +22,8 @@
> > #include <asm/mach-imx/gpio.h>
> > #include "ddr.h"
> >
> > +#include <linux/delay.h>
> > +
> > static unsigned int lpddr4_mr_read(unsigned int mr_rank, unsigned int
> mr_addr)
> > {
> > unsigned int tmp;
> > @@ -137,10 +139,11 @@ void spl_dram_init_compulab(void)
> > (struct lpddr4_tcm_desc *)SPL_TCM_DATA;
> >
> > if (lpddr4_tcm_desc->sign != DEFAULT) {
> > - /* if not in tcm scan mode */
> > + /* get ddr type from the eeprom if not in tcm scan mode
> */
> > + ddr_info = cl_eeprom_get_ddrinfo();
> > for (i = 0; i < ARRAY_SIZE(lpddr4_array); i++) {
> > if (lpddr4_array[i].id == ddr_info &&
> > - lpddr4_array[i].subind == 0xff) {
> > + lpddr4_array[i].subind ==
> cl_eeprom_get_subind()) {
> > ddr_found = 1;
> > break;
> > }
> > @@ -198,10 +201,25 @@ void spl_dram_init_compulab(void)
> >
> > SPL_TCM_FINI;
> >
> > + if (ddr_found == 0) {
> > + /* Update eeprom */
> > + cl_eeprom_set_ddrinfo(ddr_info_mrr);
> > + mdelay(10);
> > + ddr_info = cl_eeprom_get_ddrinfo();
> > + mdelay(10);
> > + cl_eeprom_set_subind(lpddr4_array[i].subind);
> > + /* make sure that the ddr_info has reached the eeprom */
> > + printf("DDRINFO(E): mr5-8 [ 0x%x ], read back\n",
> ddr_info);
> > + if (ddr_info_mrr != ddr_info || cl_eeprom_get_subind()
> != lpddr4_array[i].subind) {
> > + printf("DDRINFO(EEPROM): make sure that the
> eeprom is accessible\n");
> > + printf("DDRINFO(EEPROM): i2c dev 1; i2c md 0x51
> 0x40 0x50\n");
> > + }
> > + }
> > +
> > /* Pass the dram size to th U-Boot through the tcm memory */
> > { /* To figure out what to store into the TCM buffer */
> > /* For debug purpouse only. To override the real memsize */
> > - unsigned int ddr_tcm_size = 0;
> > + unsigned int ddr_tcm_size = cl_eeprom_get_osize();
> >
> > if (ddr_tcm_size == 0 || ddr_tcm_size == -1)
> > ddr_tcm_size = lpddr4_array[i].size;
> > diff --git a/board/compulab/imx8mm-cl-iot-gate/ddr/ddr.h
> b/board/compulab/imx8mm-cl-iot-gate/ddr/ddr.h
> > index 59c18911592e..f7d4fdc1016a 100644
> > --- a/board/compulab/imx8mm-cl-iot-gate/ddr/ddr.h
> > +++ b/board/compulab/imx8mm-cl-iot-gate/ddr/ddr.h
> > @@ -23,4 +23,9 @@ struct lpddr4_tcm_desc {
> > unsigned int count;
> > };
> >
> > +u32 cl_eeprom_get_ddrinfo(void);
> > +u32 cl_eeprom_set_ddrinfo(u32 ddrinfo);
> > +u32 cl_eeprom_get_subind(void);
> > +u32 cl_eeprom_set_subind(u32 subind);
> > +u32 cl_eeprom_get_osize(void);
> > #endif
> > --
> > 2.25.1
> >
>
> Fabio,
>
> This seems like a strange approach if you have an EEPROM that tells
> you which memory you have. If you know which memory why don't you just
> use the correct struct dram_timing_info directly from the lpddr4_array
> instead of looping through the array?
>
> For imx8mm_venice boards the EEPROM on the board provides me with DRAM
> details. Currently I only need DRAM size to be able to pick from
> several dram_timing_info options [1].
>
> Best Regards,
>
> Tim
> [1]
> https://elixir.bootlin.com/u-boot/latest/source/board/gateworks/venice/spl.c#L39
>
More information about the U-Boot
mailing list