[PATCH 6/7] Remove CONFIG_BOARDNAME and CONFIG_BOARD_NAME
Tom Rini
trini at konsulko.com
Tue Mar 22 02:33:32 CET 2022
Both of these variables are used in a few hard-coded ways to set some
string values or print something to the user. In almost all cases, it's
just as useful to hard-code the value used. The exception here is
printing something closer to correct board name for p1_p2_rdb machines.
This can be done using something from the device tree, but for now
hard-code a non-CONFIG based value instead.
Signed-off-by: Tom Rini <trini at konsulko.com>
---
board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 11 ++++++++++-
board/ge/bx50v3/bx50v3.c | 2 +-
include/configs/T102xRDB.h | 17 +++++++++--------
include/configs/el6x_common.h | 6 +-----
include/configs/ge_bx50v3.h | 2 --
include/configs/opos6uldev.h | 9 ++++-----
include/configs/p1_p2_rdb_pc.h | 3 ---
7 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index 19ece1229631..b6f0d2042677 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -160,6 +160,14 @@ int board_early_init_f(void)
return 0;
}
+#if defined(CONFIG_TARGET_P1020RDB_PC)
+#define BOARD_NAME "P1020RDB-PC"
+#elif defined(CONFIG_TARGET_P1020RDB_PD)
+#define BOARD_NAME "P1020RDB-PD"
+#elif defined(CONFIG_TARGET_P2020RDB)
+#define BOARD_NAME "P2020RDB-PC"
+#endif
+
int checkboard(void)
{
struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
@@ -167,7 +175,8 @@ int checkboard(void)
u8 in, out, io_config, val;
int bus_num = CONFIG_SYS_SPD_BUS_NUM;
- printf("Board: %s CPLD: V%d.%d PCBA: V%d.0\n", CONFIG_BOARDNAME,
+ /* FIXME: This should just use the model from the device tree or similar */
+ printf("Board: %s CPLD: V%d.%d PCBA: V%d.0\n", BOARD_NAME,
in_8(&cpld_data->cpld_rev_major) & 0x0F,
in_8(&cpld_data->cpld_rev_minor) & 0x0F,
in_8(&cpld_data->pcba_rev) & 0x0F);
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index ed700f4e1da5..4e9d841fe291 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -547,7 +547,7 @@ int last_stage_init(void)
int checkboard(void)
{
- printf("BOARD: %s\n", CONFIG_BOARD_NAME);
+ printf("BOARD: General Electric Bx50v3\n");
return 0;
}
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index dfb9e9120aea..a244daf0ae72 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -531,20 +531,21 @@
#define __USB_PHY_TYPE utmi
#ifdef CONFIG_ARCH_T1024
-#define CONFIG_BOARDNAME t1024rdb
-#define BANK_INTLV cs0_cs1
+#define ARCH_EXTRA_ENV_SETTINGS \
+ "bank_intlv=cs0_cs1\0" \
+ "ramdiskfile=t1024rdb/ramdisk.uboot\0" \
+ "fdtfile=t1024rdb/t1024rdb.dtb\0"
#else
-#define CONFIG_BOARDNAME t1023rdb
-#define BANK_INTLV null
+#define ARCH_EXTRA_ENV_SETTINGS \
+ "bank_intlv=null\0" \
+ "ramdiskfile=t1023rdb/ramdisk.uboot\0" \
+ "fdtfile=t1023rdb/t1023rdb.dtb\0"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
+ ARCH_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
- "bank_intlv=" __stringify(BANK_INTLV) "\0" \
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
- "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \
- "fdtfile=" __stringify(CONFIG_BOARDNAME) "/" \
- __stringify(CONFIG_BOARDNAME) ".dtb\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
"bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
diff --git a/include/configs/el6x_common.h b/include/configs/el6x_common.h
index 4764d22520ac..bcd7b84cf382 100644
--- a/include/configs/el6x_common.h
+++ b/include/configs/el6x_common.h
@@ -10,8 +10,6 @@
#include <linux/stringify.h>
-#define CONFIG_BOARD_NAME EL6Q
-
#include "mx6_common.h"
#ifdef CONFIG_SPL
@@ -30,10 +28,8 @@
#define CONFIG_MXC_UART_BASE UART2_BASE
-#define CONFIG_BOARD_NAME EL6Q
-
#define CONFIG_EXTRA_ENV_SETTINGS \
- "board="__stringify(CONFIG_BOARD_NAME)"\0" \
+ "board=EL6Q\0" \
"cma_size="__stringify(EL6Q_CMA_SIZE)"\0" \
"chp_size="__stringify(EL6Q_COHERENT_POOL_SIZE)"\0" \
"console=" CONSOLE_DEV "\0" \
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index 402c5bfacbe3..8d467e420f1c 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -14,8 +14,6 @@
#include <asm/arch/imx-regs.h>
#include <asm/mach-imx/gpio.h>
-#define CONFIG_BOARD_NAME "General Electric Bx50v3"
-
#include "mx6_common.h"
#include <linux/sizes.h>
diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h
index 54b1a78affb6..bb2408c1e218 100644
--- a/include/configs/opos6uldev.h
+++ b/include/configs/opos6uldev.h
@@ -45,18 +45,17 @@
/* Environment is stored in the eMMC boot partition */
#define CONFIG_ENV_VERSION 100
-#define CONFIG_BOARD_NAME opos6ul
#define ACFG_CONSOLE_DEV ttymxc0
#define CONFIG_SYS_AUTOLOAD "no"
-#define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
+#define CONFIG_ROOTPATH "/tftpboot/opos6ul-root"
#define CONFIG_EXTRA_ENV_SETTINGS \
"env_version=" __stringify(CONFIG_ENV_VERSION) "\0" \
"consoledev=" __stringify(ACFG_CONSOLE_DEV) "\0" \
- "board_name=" __stringify(CONFIG_BOARD_NAME) "\0" \
+ "board_name=opos6ul\0" \
"fdt_addr=0x88000000\0" \
"fdt_high=0xffffffff\0" \
- "fdt_name=" __stringify(CONFIG_BOARD_NAME) "dev\0" \
+ "fdt_name=opos6uldev\0" \
"initrd_high=0xffffffff\0" \
"ip_dyn=yes\0" \
"stdin=serial\0" \
@@ -66,7 +65,7 @@
"mmcpart=2\0" \
"mmcroot=/dev/mmcblk0p2 ro\0" \
"mmcrootfstype=ext4 rootwait\0" \
- "kernelimg=" __stringify(CONFIG_BOARD_NAME) "-linux.bin\0" \
+ "kernelimg=opos6ul-linux.bin\0" \
"splashpos=0,0\0" \
"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"videomode=video=ctfb:x:800,y:480,depth:18,pclk:33033,le:96,ri:96,up:20,lo:21,hs:64,vs:4,sync:0,vmode:0\0" \
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 64a5269076af..a6523753d5ca 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -13,7 +13,6 @@
#include <linux/stringify.h>
#if defined(CONFIG_TARGET_P1020RDB_PC)
-#define CONFIG_BOARDNAME "P1020RDB-PC"
#define CONFIG_VSC7385_ENET
#define CONFIG_SLIC
#define __SW_BOOT_MASK 0x03
@@ -39,7 +38,6 @@
* 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off
*/
#if defined(CONFIG_TARGET_P1020RDB_PD)
-#define CONFIG_BOARDNAME "P1020RDB-PD"
#define CONFIG_VSC7385_ENET
#define CONFIG_SLIC
#define __SW_BOOT_MASK 0x03
@@ -55,7 +53,6 @@
#endif
#if defined(CONFIG_TARGET_P2020RDB)
-#define CONFIG_BOARDNAME "P2020RDB-PC"
#define CONFIG_VSC7385_ENET
#define __SW_BOOT_MASK 0x03
#define __SW_BOOT_NOR 0xc8
--
2.25.1
More information about the U-Boot
mailing list