[PATCH 06/10] net: Remove lan91c96 driver
Tom Rini
trini at konsulko.com
Thu Mar 31 19:46:49 CEST 2022
This driver is not enabled by any board and not converted to DM_ETH.
Remove.
Signed-off-by: Tom Rini <trini at konsulko.com>
---
drivers/net/Makefile | 1 -
drivers/net/lan91c96.c | 799 -----------------------------------------
drivers/net/lan91c96.h | 616 -------------------------------
3 files changed, 1416 deletions(-)
delete mode 100644 drivers/net/lan91c96.c
delete mode 100644 drivers/net/lan91c96.h
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 4c4fe9b0b396..be3264e04133 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -47,7 +47,6 @@ obj-$(CONFIG_GMAC_ROCKCHIP) += gmac_rockchip.o
obj-$(CONFIG_HIGMACV300_ETH) += higmacv300.o
obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
obj-$(CONFIG_KSZ9477) += ksz9477.o
-obj-$(CONFIG_LAN91C96) += lan91c96.o
obj-$(CONFIG_LPC32XX_ETH) += lpc32xx_eth.o
obj-$(CONFIG_MACB) += macb.o
obj-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
deleted file mode 100644
index c2f611144db6..000000000000
--- a/drivers/net/lan91c96.c
+++ /dev/null
@@ -1,799 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*------------------------------------------------------------------------
- * lan91c96.c
- * This is a driver for SMSC's LAN91C96 single-chip Ethernet device, based
- * on the SMC91111 driver from U-Boot.
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Rolf Offermanns <rof at sysgo.de>
- *
- * Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
- * Developed by Simple Network Magic Corporation (SNMC)
- * Copyright (C) 1996 by Erik Stahlman (ES)
- *
- * Information contained in this file was obtained from the LAN91C96
- * manual from SMC. To get a copy, if you really want one, you can find
- * information under www.smsc.com.
- *
- * "Features" of the SMC chip:
- * 6144 byte packet memory. ( for the 91C96 )
- * EEPROM for configuration
- * AUI/TP selection ( mine has 10Base2/10BaseT select )
- *
- * Arguments:
- * io = for the base address
- * irq = for the IRQ
- *
- * author:
- * Erik Stahlman ( erik at vt.edu )
- * Daris A Nevil ( dnevil at snmc.com )
- *
- *
- * Hardware multicast code from Peter Cammaert ( pc at denkart.be )
- *
- * Sources:
- * o SMSC LAN91C96 databook (www.smsc.com)
- * o smc91111.c (u-boot driver)
- * o smc9194.c (linux kernel driver)
- * o lan91c96.c (Intel Diagnostic Manager driver)
- *
- * History:
- * 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version)
- * for lan91c96
- *---------------------------------------------------------------------------
- */
-
-#include <common.h>
-#include <command.h>
-#include <env.h>
-#include <malloc.h>
-#include <linux/delay.h>
-#include "lan91c96.h"
-#include <net.h>
-#include <linux/compiler.h>
-
-/*------------------------------------------------------------------------
- *
- * Configuration options, for the experienced user to change.
- *
- -------------------------------------------------------------------------*/
-
-/* Use power-down feature of the chip */
-#define POWER_DOWN 0
-
-/*
- * Wait time for memory to be free. This probably shouldn't be
- * tuned that much, as waiting for this means nothing else happens
- * in the system
-*/
-#define MEMORY_WAIT_TIME 16
-
-#define SMC_DEBUG 0
-
-#if (SMC_DEBUG > 2 )
-#define PRINTK3(args...) printf(args)
-#else
-#define PRINTK3(args...)
-#endif
-
-#if SMC_DEBUG > 1
-#define PRINTK2(args...) printf(args)
-#else
-#define PRINTK2(args...)
-#endif
-
-#ifdef SMC_DEBUG
-#define PRINTK(args...) printf(args)
-#else
-#define PRINTK(args...)
-#endif
-
-
-/*------------------------------------------------------------------------
- *
- * The internal workings of the driver. If you are changing anything
- * here with the SMC stuff, you should have the datasheet and know
- * what you are doing.
- *
- *------------------------------------------------------------------------
- */
-#define DRIVER_NAME "LAN91C96"
-#define SMC_ALLOC_MAX_TRY 5
-#define SMC_TX_TIMEOUT 30
-
-#define ETH_ZLEN 60
-
-#ifdef CONFIG_LAN91C96_USE_32_BIT
-#define USE_32_BIT 1
-#else
-#undef USE_32_BIT
-#endif
-
-/* See if a MAC address is defined in the current environment. If so use it. If not
- . print a warning and set the environment and other globals with the default.
- . If an EEPROM is present it really should be consulted.
-*/
-static int smc_get_ethaddr(struct bd_info *bd, struct eth_device *dev);
-static int get_rom_mac(struct eth_device *dev, unsigned char *v_rom_mac);
-
-/* ------------------------------------------------------------
- * Internal routines
- * ------------------------------------------------------------
- */
-
-static unsigned char smc_mac_addr[] = { 0xc0, 0x00, 0x00, 0x1b, 0x62, 0x9c };
-
-/*
- * This function must be called before smc_open() if you want to override
- * the default mac address.
- */
-
-static void smc_set_mac_addr(const unsigned char *addr)
-{
- int i;
-
- for (i = 0; i < sizeof (smc_mac_addr); i++) {
- smc_mac_addr[i] = addr[i];
- }
-}
-
-/***********************************************
- * Show available memory *
- ***********************************************/
-void dump_memory_info(struct eth_device *dev)
-{
- __maybe_unused word mem_info;
- word old_bank;
-
- old_bank = SMC_inw(dev, LAN91C96_BANK_SELECT) & 0xF;
-
- SMC_SELECT_BANK(dev, 0);
- mem_info = SMC_inw(dev, LAN91C96_MIR);
- PRINTK2 ("Memory: %4d available\n", (mem_info >> 8) * 2048);
-
- SMC_SELECT_BANK(dev, old_bank);
-}
-
-/*
- * A rather simple routine to print out a packet for debugging purposes.
- */
-#if SMC_DEBUG > 2
-static void print_packet (byte *, int);
-#endif
-
-static int poll4int (struct eth_device *dev, byte mask, int timeout)
-{
- int tmo = get_timer (0) + timeout * CONFIG_SYS_HZ;
- int is_timeout = 0;
- word old_bank = SMC_inw(dev, LAN91C96_BANK_SELECT);
-
- PRINTK2 ("Polling...\n");
- SMC_SELECT_BANK(dev, 2);
- while ((SMC_inw(dev, LAN91C96_INT_STATS) & mask) == 0) {
- if (get_timer (0) >= tmo) {
- is_timeout = 1;
- break;
- }
- }
-
- /* restore old bank selection */
- SMC_SELECT_BANK(dev, old_bank);
-
- if (is_timeout)
- return 1;
- else
- return 0;
-}
-
-/*
- * Function: smc_reset
- * Purpose:
- * This sets the SMC91111 chip to its normal state, hopefully from whatever
- * mess that any other DOS driver has put it in.
- *
- * Maybe I should reset more registers to defaults in here? SOFTRST should
- * do that for me.
- *
- * Method:
- * 1. send a SOFT RESET
- * 2. wait for it to finish
- * 3. enable autorelease mode
- * 4. reset the memory management unit
- * 5. clear all interrupts
- *
-*/
-static void smc_reset(struct eth_device *dev)
-{
- PRINTK2("%s:smc_reset\n", dev->name);
-
- /* This resets the registers mostly to defaults, but doesn't
- affect EEPROM. That seems unnecessary */
- SMC_SELECT_BANK(dev, 0);
- SMC_outw(dev, LAN91C96_RCR_SOFT_RST, LAN91C96_RCR);
-
- udelay(10);
-
- /* Disable transmit and receive functionality */
- SMC_outw(dev, 0, LAN91C96_RCR);
- SMC_outw(dev, 0, LAN91C96_TCR);
-
- /* set the control register */
- SMC_SELECT_BANK(dev, 1);
- SMC_outw(dev, SMC_inw(dev, LAN91C96_CONTROL) | LAN91C96_CTR_BIT_8,
- LAN91C96_CONTROL);
-
- /* Disable all interrupts */
- SMC_outb(dev, 0, LAN91C96_INT_MASK);
-}
-
-/*
- * Function: smc_enable
- * Purpose: let the chip talk to the outside work
- * Method:
- * 1. Initialize the Memory Configuration Register
- * 2. Enable the transmitter
- * 3. Enable the receiver
-*/
-static void smc_enable(struct eth_device *dev)
-{
- PRINTK2("%s:smc_enable\n", dev->name);
- SMC_SELECT_BANK(dev, 0);
-
- /* Initialize the Memory Configuration Register. See page
- 49 of the LAN91C96 data sheet for details. */
- SMC_outw(dev, LAN91C96_MCR_TRANSMIT_PAGES, LAN91C96_MCR);
-
- /* Initialize the Transmit Control Register */
- SMC_outw(dev, LAN91C96_TCR_TXENA, LAN91C96_TCR);
- /* Initialize the Receive Control Register
- * FIXME:
- * The promiscuous bit set because I could not receive ARP reply
- * packets from the server when I send a ARP request. It only works
- * when I set the promiscuous bit
- */
- SMC_outw(dev, LAN91C96_RCR_RXEN | LAN91C96_RCR_PRMS, LAN91C96_RCR);
-}
-
-/*
- * Function: smc_shutdown
- * Purpose: closes down the SMC91xxx chip.
- * Method:
- * 1. zero the interrupt mask
- * 2. clear the enable receive flag
- * 3. clear the enable xmit flags
- *
- * TODO:
- * (1) maybe utilize power down mode.
- * Why not yet? Because while the chip will go into power down mode,
- * the manual says that it will wake up in response to any I/O requests
- * in the register space. Empirical results do not show this working.
- */
-static void smc_shutdown(struct eth_device *dev)
-{
- PRINTK2("%s:smc_shutdown\n", dev->name);
-
- /* no more interrupts for me */
- SMC_SELECT_BANK(dev, 2);
- SMC_outb(dev, 0, LAN91C96_INT_MASK);
-
- /* and tell the card to stay away from that nasty outside world */
- SMC_SELECT_BANK(dev, 0);
- SMC_outb(dev, 0, LAN91C96_RCR);
- SMC_outb(dev, 0, LAN91C96_TCR);
-}
-
-
-/*
- * Function: smc_hardware_send_packet(struct net_device * )
- * Purpose:
- * This sends the actual packet to the SMC9xxx chip.
- *
- * Algorithm:
- * First, see if a saved_skb is available.
- * ( this should NOT be called if there is no 'saved_skb'
- * Now, find the packet number that the chip allocated
- * Point the data pointers at it in memory
- * Set the length word in the chip's memory
- * Dump the packet to chip memory
- * Check if a last byte is needed ( odd length packet )
- * if so, set the control flag right
- * Tell the card to send it
- * Enable the transmit interrupt, so I know if it failed
- * Free the kernel data if I actually sent it.
- */
-static int smc_send_packet(struct eth_device *dev, void *packet,
- int packet_length)
-{
- byte packet_no;
- byte *buf;
- int length;
- int numPages;
- int try = 0;
- int time_out;
- byte status;
-
-
- PRINTK3("%s:smc_hardware_send_packet\n", dev->name);
-
- length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN;
-
- /* allocate memory
- ** The MMU wants the number of pages to be the number of 256 bytes
- ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
- **
- ** The 91C111 ignores the size bits, but the code is left intact
- ** for backwards and future compatibility.
- **
- ** Pkt size for allocating is data length +6 (for additional status
- ** words, length and ctl!)
- **
- ** If odd size then last byte is included in this header.
- */
- numPages = ((length & 0xfffe) + 6);
- numPages >>= 8; /* Divide by 256 */
-
- if (numPages > 7) {
- printf("%s: Far too big packet error. \n", dev->name);
- return 0;
- }
-
- /* now, try to allocate the memory */
-
- SMC_SELECT_BANK(dev, 2);
- SMC_outw(dev, LAN91C96_MMUCR_ALLOC_TX | numPages, LAN91C96_MMU);
-
- again:
- try++;
- time_out = MEMORY_WAIT_TIME;
- do {
- status = SMC_inb(dev, LAN91C96_INT_STATS);
- if (status & LAN91C96_IST_ALLOC_INT) {
-
- SMC_outb(dev, LAN91C96_IST_ALLOC_INT,
- LAN91C96_INT_STATS);
- break;
- }
- } while (--time_out);
-
- if (!time_out) {
- PRINTK2 ("%s: memory allocation, try %d failed ...\n",
- dev->name, try);
- if (try < SMC_ALLOC_MAX_TRY)
- goto again;
- else
- return 0;
- }
-
- PRINTK2 ("%s: memory allocation, try %d succeeded ...\n",
- dev->name, try);
-
- /* I can send the packet now.. */
- buf = (byte *) packet;
-
- /* If I get here, I _know_ there is a packet slot waiting for me */
- packet_no = SMC_inb(dev, LAN91C96_ARR);
- if (packet_no & LAN91C96_ARR_FAILED) {
- /* or isn't there? BAD CHIP! */
- printf("%s: Memory allocation failed. \n", dev->name);
- return 0;
- }
-
- /* we have a packet address, so tell the card to use it */
- SMC_outb(dev, packet_no, LAN91C96_PNR);
-
- /* point to the beginning of the packet */
- SMC_outw(dev, LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER);
-
- PRINTK3("%s: Trying to xmit packet of length %x\n",
- dev->name, length);
-
-#if SMC_DEBUG > 2
- printf ("Transmitting Packet\n");
- print_packet (buf, length);
-#endif
-
- /* send the packet length ( +6 for status, length and ctl byte )
- and the status word ( set to zeros ) */
-#ifdef USE_32_BIT
- SMC_outl(dev, (length + 6) << 16, LAN91C96_DATA_HIGH);
-#else
- SMC_outw(dev, 0, LAN91C96_DATA_HIGH);
- /* send the packet length ( +6 for status words, length, and ctl */
- SMC_outw(dev, (length + 6), LAN91C96_DATA_HIGH);
-#endif /* USE_32_BIT */
-
- /* send the actual data
- * I _think_ it's faster to send the longs first, and then
- * mop up by sending the last word. It depends heavily
- * on alignment, at least on the 486. Maybe it would be
- * a good idea to check which is optimal? But that could take
- * almost as much time as is saved?
- */
-#ifdef USE_32_BIT
- SMC_outsl(dev, LAN91C96_DATA_HIGH, buf, length >> 2);
- if (length & 0x2)
- SMC_outw(dev, *((word *) (buf + (length & 0xFFFFFFFC))),
- LAN91C96_DATA_HIGH);
-#else
- SMC_outsw(dev, LAN91C96_DATA_HIGH, buf, (length) >> 1);
-#endif /* USE_32_BIT */
-
- /* Send the last byte, if there is one. */
- if ((length & 1) == 0) {
- SMC_outw(dev, 0, LAN91C96_DATA_HIGH);
- } else {
- SMC_outw(dev, buf[length - 1] | 0x2000, LAN91C96_DATA_HIGH);
- }
-
- /* and let the chipset deal with it */
- SMC_outw(dev, LAN91C96_MMUCR_ENQUEUE, LAN91C96_MMU);
-
- /* poll for TX INT */
- if (poll4int (dev, LAN91C96_MSK_TX_INT, SMC_TX_TIMEOUT)) {
- /* sending failed */
- PRINTK2("%s: TX timeout, sending failed...\n", dev->name);
-
- /* release packet */
- SMC_outw(dev, LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU);
-
- /* wait for MMU getting ready (low) */
- while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
- udelay(10);
-
- PRINTK2("MMU ready\n");
-
-
- return 0;
- } else {
- /* ack. int */
- SMC_outw(dev, LAN91C96_IST_TX_INT, LAN91C96_INT_STATS);
-
- PRINTK2("%s: Sent packet of length %d \n", dev->name, length);
-
- /* release packet */
- SMC_outw(dev, LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU);
-
- /* wait for MMU getting ready (low) */
- while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
- udelay(10);
-
- PRINTK2 ("MMU ready\n");
- }
-
- return length;
-}
-
-
-/*
- * Open and Initialize the board
- *
- * Set up everything, reset the card, etc ..
- *
- */
-static int smc_open(struct bd_info *bd, struct eth_device *dev)
-{
- int i, err; /* used to set hw ethernet address */
-
- PRINTK2("%s:smc_open\n", dev->name);
-
- /* reset the hardware */
-
- smc_reset(dev);
- smc_enable(dev);
-
- SMC_SELECT_BANK(dev, 1);
- /* set smc_mac_addr, and sync it with u-boot globals */
- err = smc_get_ethaddr(bd, dev);
- if (err < 0)
- return -1;
-#ifdef USE_32_BIT
- for (i = 0; i < 6; i += 2) {
- word address;
-
- address = smc_mac_addr[i + 1] << 8;
- address |= smc_mac_addr[i];
- SMC_outw(dev, address, LAN91C96_IA0 + i);
- }
-#else
- for (i = 0; i < 6; i++)
- SMC_outb(dev, smc_mac_addr[i], LAN91C96_IA0 + i);
-#endif
- return 0;
-}
-
-/*-------------------------------------------------------------
- *
- * smc_rcv - receive a packet from the card
- *
- * There is ( at least ) a packet waiting to be read from
- * chip-memory.
- *
- * o Read the status
- * o If an error, record it
- * o otherwise, read in the packet
- *-------------------------------------------------------------
- */
-static int smc_rcv(struct eth_device *dev)
-{
- int packet_number;
- word status;
- word packet_length;
- int is_error = 0;
-
-#ifdef USE_32_BIT
- dword stat_len;
-#endif
-
-
- SMC_SELECT_BANK(dev, 2);
- packet_number = SMC_inw(dev, LAN91C96_FIFO);
-
- if (packet_number & LAN91C96_FIFO_RXEMPTY) {
- return 0;
- }
-
- PRINTK3("%s:smc_rcv\n", dev->name);
- /* start reading from the start of the packet */
- SMC_outw(dev, LAN91C96_PTR_READ | LAN91C96_PTR_RCV |
- LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER);
-
- /* First two words are status and packet_length */
-#ifdef USE_32_BIT
- stat_len = SMC_inl(dev, LAN91C96_DATA_HIGH);
- status = stat_len & 0xffff;
- packet_length = stat_len >> 16;
-#else
- status = SMC_inw(dev, LAN91C96_DATA_HIGH);
- packet_length = SMC_inw(dev, LAN91C96_DATA_HIGH);
-#endif
-
- packet_length &= 0x07ff; /* mask off top bits */
-
- PRINTK2 ("RCV: STATUS %4x LENGTH %4x\n", status, packet_length);
-
- if (!(status & FRAME_FILTER)) {
- /* Adjust for having already read the first two words */
- packet_length -= 4; /*4; */
-
-
- /* set odd length for bug in LAN91C111, */
- /* which never sets RS_ODDFRAME */
- /* TODO ? */
-
-
-#ifdef USE_32_BIT
- PRINTK3 (" Reading %d dwords (and %d bytes) \n",
- packet_length >> 2, packet_length & 3);
- /* QUESTION: Like in the TX routine, do I want
- to send the DWORDs or the bytes first, or some
- mixture. A mixture might improve already slow PIO
- performance */
- SMC_insl(dev, LAN91C96_DATA_HIGH, net_rx_packets[0],
- packet_length >> 2);
- /* read the left over bytes */
- if (packet_length & 3) {
- int i;
-
- byte *tail = (byte *)(net_rx_packets[0] +
- (packet_length & ~3));
- dword leftover = SMC_inl(dev, LAN91C96_DATA_HIGH);
-
- for (i = 0; i < (packet_length & 3); i++)
- *tail++ = (byte) (leftover >> (8 * i)) & 0xff;
- }
-#else
- PRINTK3(" Reading %d words and %d byte(s)\n",
- (packet_length >> 1), packet_length & 1);
- SMC_insw(dev, LAN91C96_DATA_HIGH, net_rx_packets[0],
- packet_length >> 1);
-
-#endif /* USE_32_BIT */
-
-#if SMC_DEBUG > 2
- printf ("Receiving Packet\n");
- print_packet((byte *)net_rx_packets[0], packet_length);
-#endif
- } else {
- /* error ... */
- /* TODO ? */
- is_error = 1;
- }
-
- while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
- udelay(1); /* Wait until not busy */
-
- /* error or good, tell the card to get rid of this packet */
- SMC_outw(dev, LAN91C96_MMUCR_RELEASE_RX, LAN91C96_MMU);
-
- while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
- udelay(1); /* Wait until not busy */
-
- if (!is_error) {
- /* Pass the packet up to the protocol layers. */
- net_process_received_packet(net_rx_packets[0], packet_length);
- return packet_length;
- } else {
- return 0;
- }
-
-}
-
-/*----------------------------------------------------
- * smc_close
- *
- * this makes the board clean up everything that it can
- * and not talk to the outside world. Caused by
- * an 'ifconfig ethX down'
- *
- -----------------------------------------------------*/
-static int smc_close(struct eth_device *dev)
-{
- PRINTK2("%s:smc_close\n", dev->name);
-
- /* clear everything */
- smc_shutdown(dev);
-
- return 0;
-}
-
-#if SMC_DEBUG > 2
-static void print_packet(byte *buf, int length)
-{
-#if 0
- int i;
- int remainder;
- int lines;
-
- printf ("Packet of length %d \n", length);
-
- lines = length / 16;
- remainder = length % 16;
-
- for (i = 0; i < lines; i++) {
- int cur;
-
- for (cur = 0; cur < 8; cur++) {
- byte a, b;
-
- a = *(buf++);
- b = *(buf++);
- printf ("%02x%02x ", a, b);
- }
- printf ("\n");
- }
- for (i = 0; i < remainder / 2; i++) {
- byte a, b;
-
- a = *(buf++);
- b = *(buf++);
- printf ("%02x%02x ", a, b);
- }
- printf ("\n");
-#endif /* 0 */
-}
-#endif /* SMC_DEBUG > 2 */
-
-static int lan91c96_init(struct eth_device *dev, struct bd_info *bd)
-{
- return smc_open(bd, dev);
-}
-
-static void lan91c96_halt(struct eth_device *dev)
-{
- smc_close(dev);
-}
-
-static int lan91c96_recv(struct eth_device *dev)
-{
- return smc_rcv(dev);
-}
-
-static int lan91c96_send(struct eth_device *dev, void *packet,
- int length)
-{
- return smc_send_packet(dev, packet, length);
-}
-
-/* smc_get_ethaddr
- *
- * This checks both the environment and the ROM for an ethernet address. If
- * found, the environment takes precedence.
- */
-
-static int smc_get_ethaddr(struct bd_info *bd, struct eth_device *dev)
-{
- uchar v_mac[6];
-
- if (!eth_env_get_enetaddr("ethaddr", v_mac)) {
- /* get ROM mac value if any */
- if (!get_rom_mac(dev, v_mac)) {
- printf("\n*** ERROR: ethaddr is NOT set !!\n");
- return -1;
- }
- eth_env_set_enetaddr("ethaddr", v_mac);
- }
-
- smc_set_mac_addr(v_mac); /* use old function to update smc default */
- PRINTK("Using MAC Address %pM\n", v_mac);
- return 0;
-}
-
-/*
- * get_rom_mac()
- * Note, this has omly been tested for the OMAP730 P2.
- */
-
-static int get_rom_mac(struct eth_device *dev, unsigned char *v_rom_mac)
-{
- int i;
- SMC_SELECT_BANK(dev, 1);
- for (i=0; i<6; i++)
- {
- v_rom_mac[i] = SMC_inb(dev, LAN91C96_IA0 + i);
- }
- return (1);
-}
-
-/* Structure to detect the device IDs */
-struct id_type {
- u8 id;
- char *name;
-};
-static struct id_type supported_chips[] = {
- {0, ""}, /* Dummy entry to prevent id check failure */
- {9, "LAN91C110"},
- {8, "LAN91C100FD"},
- {7, "LAN91C100"},
- {5, "LAN91C95"},
- {4, "LAN91C94/96"},
- {3, "LAN91C90/92"},
-};
-/* lan91c96_detect_chip
- * See:
- * http://www.embeddedsys.com/subpages/resources/images/documents/LAN91C96_datasheet.pdf
- * page 71 - that is the closest we get to detect this device
- */
-static int lan91c96_detect_chip(struct eth_device *dev)
-{
- u8 chip_id;
- int r;
- SMC_SELECT_BANK(dev, 3);
- chip_id = (SMC_inw(dev, 0xA) & LAN91C96_REV_CHIPID) >> 4;
- SMC_SELECT_BANK(dev, 0);
- for (r = 0; r < ARRAY_SIZE(supported_chips); r++)
- if (chip_id == supported_chips[r].id)
- return r;
- return 0;
-}
-
-int lan91c96_initialize(u8 dev_num, int base_addr)
-{
- struct eth_device *dev;
- int r = 0;
-
- dev = malloc(sizeof(*dev));
- if (!dev) {
- return 0;
- }
- memset(dev, 0, sizeof(*dev));
-
- dev->iobase = base_addr;
-
- /* Try to detect chip. Will fail if not present. */
- r = lan91c96_detect_chip(dev);
- if (!r) {
- free(dev);
- return 0;
- }
- get_rom_mac(dev, dev->enetaddr);
-
- dev->init = lan91c96_init;
- dev->halt = lan91c96_halt;
- dev->send = lan91c96_send;
- dev->recv = lan91c96_recv;
- sprintf(dev->name, "%s-%hu", supported_chips[r].name, dev_num);
-
- eth_register(dev);
- return 0;
-}
diff --git a/drivers/net/lan91c96.h b/drivers/net/lan91c96.h
deleted file mode 100644
index c76348084a33..000000000000
--- a/drivers/net/lan91c96.h
+++ /dev/null
@@ -1,616 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*------------------------------------------------------------------------
- * lan91c96.h
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Rolf Offermanns <rof at sysgo.de>
- * Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
- * Developed by Simple Network Magic Corporation (SNMC)
- * Copyright (C) 1996 by Erik Stahlman (ES)
- *
- * This file contains register information and access macros for
- * the LAN91C96 single chip ethernet controller. It is a modified
- * version of the smc9111.h file.
- *
- * Information contained in this file was obtained from the LAN91C96
- * manual from SMC. To get a copy, if you really want one, you can find
- * information under www.smsc.com.
- *
- * Authors
- * Erik Stahlman ( erik at vt.edu )
- * Daris A Nevil ( dnevil at snmc.com )
- *
- * History
- * 04/30/03 Mathijs Haarman Modified smc91111.h (u-boot version)
- * for lan91c96
- *-------------------------------------------------------------------------
- */
-#ifndef _LAN91C96_H_
-#define _LAN91C96_H_
-
-#include <asm/types.h>
-#include <asm/io.h>
-#include <config.h>
-
-/* I want some simple types */
-
-typedef unsigned char byte;
-typedef unsigned short word;
-typedef unsigned long int dword;
-
-/*
- * DEBUGGING LEVELS
- *
- * 0 for normal operation
- * 1 for slightly more details
- * >2 for various levels of increasingly useless information
- * 2 for interrupt tracking, status flags
- * 3 for packet info
- * 4 for complete packet dumps
- */
-/*#define SMC_DEBUG 0 */
-
-/* Because of bank switching, the LAN91xxx uses only 16 I/O ports */
-
-#define SMC_IO_EXTENT 16
-
-#ifdef CONFIG_CPU_PXA25X
-
-#define SMC_IO_SHIFT 0
-
-#define SMCREG(edev, r) ((edev)->iobase+((r)<<SMC_IO_SHIFT))
-
-#define SMC_inl(edev, r) (*((volatile dword *)SMCREG(edev, r)))
-#define SMC_inw(edev, r) (*((volatile word *)SMCREG(edev, r)))
-#define SMC_inb(edev, p) ({ \
- unsigned int __p = p; \
- unsigned int __v = SMC_inw(edev, __p & ~1); \
- if (__p & 1) __v >>= 8; \
- else __v &= 0xff; \
- __v; })
-
-#define SMC_outl(edev, d, r) (*((volatile dword *)SMCREG(edev, r)) = d)
-#define SMC_outw(edev, d, r) (*((volatile word *)SMCREG(edev, r)) = d)
-#define SMC_outb(edev, d, r) ({ word __d = (byte)(d); \
- word __w = SMC_inw(edev, (r)&~1); \
- __w &= ((r)&1) ? 0x00FF : 0xFF00; \
- __w |= ((r)&1) ? __d<<8 : __d; \
- SMC_outw(edev, __w, (r)&~1); \
- })
-
-#define SMC_outsl(edev, r, b, l) ({ int __i; \
- dword *__b2; \
- __b2 = (dword *) b; \
- for (__i = 0; __i < l; __i++) { \
- SMC_outl(edev, *(__b2 + __i),\
- r); \
- } \
- })
-
-#define SMC_outsw(edev, r, b, l) ({ int __i; \
- word *__b2; \
- __b2 = (word *) b; \
- for (__i = 0; __i < l; __i++) { \
- SMC_outw(edev, *(__b2 + __i),\
- r); \
- } \
- })
-
-#define SMC_insl(edev, r, b, l) ({ int __i ; \
- dword *__b2; \
- __b2 = (dword *) b; \
- for (__i = 0; __i < l; __i++) { \
- *(__b2 + __i) = SMC_inl(edev,\
- r); \
- SMC_inl(edev, 0); \
- }; \
- })
-
-#define SMC_insw(edev, r, b, l) ({ int __i ; \
- word *__b2; \
- __b2 = (word *) b; \
- for (__i = 0; __i < l; __i++) { \
- *(__b2 + __i) = SMC_inw(edev,\
- r); \
- SMC_inw(edev, 0); \
- }; \
- })
-
-#define SMC_insb(edev, r, b, l) ({ int __i ; \
- byte *__b2; \
- __b2 = (byte *) b; \
- for (__i = 0; __i < l; __i++) { \
- *(__b2 + __i) = SMC_inb(edev,\
- r); \
- SMC_inb(edev, 0); \
- }; \
- })
-
-#else /* if not CONFIG_CPU_PXA25X */
-
-/*
- * We have only 16 Bit PCMCIA access on Socket 0
- */
-
-#define SMC_inw(edev, r) (*((volatile word *)((edev)->iobase+(r))))
-#define SMC_inb(edev, r) (((r)&1) ? SMC_inw(edev, (r)&~1)>>8 :\
- SMC_inw(edev, r)&0xFF)
-
-#define SMC_outw(edev, d, r) (*((volatile word *)((edev)->iobase+(r))) = d)
-#define SMC_outb(edev, d, r) ({ word __d = (byte)(d); \
- word __w = SMC_inw(edev, (r)&~1); \
- __w &= ((r)&1) ? 0x00FF : 0xFF00; \
- __w |= ((r)&1) ? __d<<8 : __d; \
- SMC_outw(edev, __w, (r)&~1); \
- })
-#define SMC_outsw(edev, r, b, l) ({ int __i; \
- word *__b2; \
- __b2 = (word *) b; \
- for (__i = 0; __i < l; __i++) { \
- SMC_outw(edev, *(__b2 + __i),\
- r); \
- } \
- })
-
-#define SMC_insw(edev, r, b, l) ({ int __i ; \
- word *__b2; \
- __b2 = (word *) b; \
- for (__i = 0; __i < l; __i++) { \
- *(__b2 + __i) = SMC_inw(edev,\
- r); \
- SMC_inw(edev, 0); \
- }; \
- })
-
-#endif
-
-/*
- ****************************************************************************
- * Bank Select Field
- ****************************************************************************
- */
-#define LAN91C96_BANK_SELECT 14 /* Bank Select Register */
-#define LAN91C96_BANKSELECT (0x3UC << 0)
-#define BANK0 0x00
-#define BANK1 0x01
-#define BANK2 0x02
-#define BANK3 0x03
-#define BANK4 0x04
-
-/*
- ****************************************************************************
- * EEPROM Addresses.
- ****************************************************************************
- */
-#define EEPROM_MAC_OFFSET_1 0x6020
-#define EEPROM_MAC_OFFSET_2 0x6021
-#define EEPROM_MAC_OFFSET_3 0x6022
-
-/*
- ****************************************************************************
- * Bank 0 Register Map in I/O Space
- ****************************************************************************
- */
-#define LAN91C96_TCR 0 /* Transmit Control Register */
-#define LAN91C96_EPH_STATUS 2 /* EPH Status Register */
-#define LAN91C96_RCR 4 /* Receive Control Register */
-#define LAN91C96_COUNTER 6 /* Counter Register */
-#define LAN91C96_MIR 8 /* Memory Information Register */
-#define LAN91C96_MCR 10 /* Memory Configuration Register */
-
-/*
- ****************************************************************************
- * Transmit Control Register - Bank 0 - Offset 0
- ****************************************************************************
- */
-#define LAN91C96_TCR_TXENA (0x1U << 0)
-#define LAN91C96_TCR_LOOP (0x1U << 1)
-#define LAN91C96_TCR_FORCOL (0x1U << 2)
-#define LAN91C96_TCR_TXP_EN (0x1U << 3)
-#define LAN91C96_TCR_PAD_EN (0x1U << 7)
-#define LAN91C96_TCR_NOCRC (0x1U << 8)
-#define LAN91C96_TCR_MON_CSN (0x1U << 10)
-#define LAN91C96_TCR_FDUPLX (0x1U << 11)
-#define LAN91C96_TCR_STP_SQET (0x1U << 12)
-#define LAN91C96_TCR_EPH_LOOP (0x1U << 13)
-#define LAN91C96_TCR_ETEN_TYPE (0x1U << 14)
-#define LAN91C96_TCR_FDSE (0x1U << 15)
-
-/*
- ****************************************************************************
- * EPH Status Register - Bank 0 - Offset 2
- ****************************************************************************
- */
-#define LAN91C96_EPHSR_TX_SUC (0x1U << 0)
-#define LAN91C96_EPHSR_SNGL_COL (0x1U << 1)
-#define LAN91C96_EPHSR_MUL_COL (0x1U << 2)
-#define LAN91C96_EPHSR_LTX_MULT (0x1U << 3)
-#define LAN91C96_EPHSR_16COL (0x1U << 4)
-#define LAN91C96_EPHSR_SQET (0x1U << 5)
-#define LAN91C96_EPHSR_LTX_BRD (0x1U << 6)
-#define LAN91C96_EPHSR_TX_DEFR (0x1U << 7)
-#define LAN91C96_EPHSR_WAKEUP (0x1U << 8)
-#define LAN91C96_EPHSR_LATCOL (0x1U << 9)
-#define LAN91C96_EPHSR_LOST_CARR (0x1U << 10)
-#define LAN91C96_EPHSR_EXC_DEF (0x1U << 11)
-#define LAN91C96_EPHSR_CTR_ROL (0x1U << 12)
-
-#define LAN91C96_EPHSR_LINK_OK (0x1U << 14)
-#define LAN91C96_EPHSR_TX_UNRN (0x1U << 15)
-
-#define LAN91C96_EPHSR_ERRORS (LAN91C96_EPHSR_SNGL_COL | \
- LAN91C96_EPHSR_MUL_COL | \
- LAN91C96_EPHSR_16COL | \
- LAN91C96_EPHSR_SQET | \
- LAN91C96_EPHSR_TX_DEFR | \
- LAN91C96_EPHSR_LATCOL | \
- LAN91C96_EPHSR_LOST_CARR | \
- LAN91C96_EPHSR_EXC_DEF | \
- LAN91C96_EPHSR_LINK_OK | \
- LAN91C96_EPHSR_TX_UNRN)
-
-/*
- ****************************************************************************
- * Receive Control Register - Bank 0 - Offset 4
- ****************************************************************************
- */
-#define LAN91C96_RCR_RX_ABORT (0x1U << 0)
-#define LAN91C96_RCR_PRMS (0x1U << 1)
-#define LAN91C96_RCR_ALMUL (0x1U << 2)
-#define LAN91C96_RCR_RXEN (0x1U << 8)
-#define LAN91C96_RCR_STRIP_CRC (0x1U << 9)
-#define LAN91C96_RCR_FILT_CAR (0x1U << 14)
-#define LAN91C96_RCR_SOFT_RST (0x1U << 15)
-
-/*
- ****************************************************************************
- * Counter Register - Bank 0 - Offset 6
- ****************************************************************************
- */
-#define LAN91C96_ECR_SNGL_COL (0xFU << 0)
-#define LAN91C96_ECR_MULT_COL (0xFU << 5)
-#define LAN91C96_ECR_DEF_TX (0xFU << 8)
-#define LAN91C96_ECR_EXC_DEF_TX (0xFU << 12)
-
-/*
- ****************************************************************************
- * Memory Information Register - Bank 0 - OFfset 8
- ****************************************************************************
- */
-#define LAN91C96_MIR_SIZE (0x18 << 0) /* 6144 bytes */
-
-/*
- ****************************************************************************
- * Memory Configuration Register - Bank 0 - Offset 10
- ****************************************************************************
- */
-#define LAN91C96_MCR_MEM_RES (0xFFU << 0)
-#define LAN91C96_MCR_MEM_MULT (0x3U << 9)
-#define LAN91C96_MCR_HIGH_ID (0x3U << 12)
-
-#define LAN91C96_MCR_TRANSMIT_PAGES 0x6
-
-/*
- ****************************************************************************
- * Bank 1 Register Map in I/O Space
- ****************************************************************************
- */
-#define LAN91C96_CONFIG 0 /* Configuration Register */
-#define LAN91C96_BASE 2 /* Base Address Register */
-#define LAN91C96_IA0 4 /* Individual Address Register - 0 */
-#define LAN91C96_IA1 5 /* Individual Address Register - 1 */
-#define LAN91C96_IA2 6 /* Individual Address Register - 2 */
-#define LAN91C96_IA3 7 /* Individual Address Register - 3 */
-#define LAN91C96_IA4 8 /* Individual Address Register - 4 */
-#define LAN91C96_IA5 9 /* Individual Address Register - 5 */
-#define LAN91C96_GEN_PURPOSE 10 /* General Address Registers */
-#define LAN91C96_CONTROL 12 /* Control Register */
-
-/*
- ****************************************************************************
- * Configuration Register - Bank 1 - Offset 0
- ****************************************************************************
- */
-#define LAN91C96_CR_INT_SEL0 (0x1U << 1)
-#define LAN91C96_CR_INT_SEL1 (0x1U << 2)
-#define LAN91C96_CR_RES (0x3U << 3)
-#define LAN91C96_CR_DIS_LINK (0x1U << 6)
-#define LAN91C96_CR_16BIT (0x1U << 7)
-#define LAN91C96_CR_AUI_SELECT (0x1U << 8)
-#define LAN91C96_CR_SET_SQLCH (0x1U << 9)
-#define LAN91C96_CR_FULL_STEP (0x1U << 10)
-#define LAN91C96_CR_NO_WAIT (0x1U << 12)
-
-/*
- ****************************************************************************
- * Base Address Register - Bank 1 - Offset 2
- ****************************************************************************
- */
-#define LAN91C96_BAR_RA_BITS (0x27U << 0)
-#define LAN91C96_BAR_ROM_SIZE (0x1U << 6)
-#define LAN91C96_BAR_A_BITS (0xFFU << 8)
-
-/*
- ****************************************************************************
- * Control Register - Bank 1 - Offset 12
- ****************************************************************************
- */
-#define LAN91C96_CTR_STORE (0x1U << 0)
-#define LAN91C96_CTR_RELOAD (0x1U << 1)
-#define LAN91C96_CTR_EEPROM (0x1U << 2)
-#define LAN91C96_CTR_TE_ENABLE (0x1U << 5)
-#define LAN91C96_CTR_CR_ENABLE (0x1U << 6)
-#define LAN91C96_CTR_LE_ENABLE (0x1U << 7)
-#define LAN91C96_CTR_BIT_8 (0x1U << 8)
-#define LAN91C96_CTR_AUTO_RELEASE (0x1U << 11)
-#define LAN91C96_CTR_WAKEUP_EN (0x1U << 12)
-#define LAN91C96_CTR_PWRDN (0x1U << 13)
-#define LAN91C96_CTR_RCV_BAD (0x1U << 14)
-
-/*
- ****************************************************************************
- * Bank 2 Register Map in I/O Space
- ****************************************************************************
- */
-#define LAN91C96_MMU 0 /* MMU Command Register */
-#define LAN91C96_AUTO_TX_START 1 /* Auto Tx Start Register */
-#define LAN91C96_PNR 2 /* Packet Number Register */
-#define LAN91C96_ARR 3 /* Allocation Result Register */
-#define LAN91C96_FIFO 4 /* FIFO Ports Register */
-#define LAN91C96_POINTER 6 /* Pointer Register */
-#define LAN91C96_DATA_HIGH 8 /* Data High Register */
-#define LAN91C96_DATA_LOW 10 /* Data Low Register */
-#define LAN91C96_INT_STATS 12 /* Interrupt Status Register - RO */
-#define LAN91C96_INT_ACK 12 /* Interrupt Acknowledge Register -WO */
-#define LAN91C96_INT_MASK 13 /* Interrupt Mask Register */
-
-/*
- ****************************************************************************
- * MMU Command Register - Bank 2 - Offset 0
- ****************************************************************************
- */
-#define LAN91C96_MMUCR_NO_BUSY (0x1U << 0)
-#define LAN91C96_MMUCR_N1 (0x1U << 1)
-#define LAN91C96_MMUCR_N2 (0x1U << 2)
-#define LAN91C96_MMUCR_COMMAND (0xFU << 4)
-#define LAN91C96_MMUCR_ALLOC_TX (0x2U << 4) /* WXYZ = 0010 */
-#define LAN91C96_MMUCR_RESET_MMU (0x4U << 4) /* WXYZ = 0100 */
-#define LAN91C96_MMUCR_REMOVE_RX (0x6U << 4) /* WXYZ = 0110 */
-#define LAN91C96_MMUCR_REMOVE_TX (0x7U << 4) /* WXYZ = 0111 */
-#define LAN91C96_MMUCR_RELEASE_RX (0x8U << 4) /* WXYZ = 1000 */
-#define LAN91C96_MMUCR_RELEASE_TX (0xAU << 4) /* WXYZ = 1010 */
-#define LAN91C96_MMUCR_ENQUEUE (0xCU << 4) /* WXYZ = 1100 */
-#define LAN91C96_MMUCR_RESET_TX (0xEU << 4) /* WXYZ = 1110 */
-
-/*
- ****************************************************************************
- * Auto Tx Start Register - Bank 2 - Offset 1
- ****************************************************************************
- */
-#define LAN91C96_AUTOTX (0xFFU << 0)
-
-/*
- ****************************************************************************
- * Packet Number Register - Bank 2 - Offset 2
- ****************************************************************************
- */
-#define LAN91C96_PNR_TX (0x1FU << 0)
-
-/*
- ****************************************************************************
- * Allocation Result Register - Bank 2 - Offset 3
- ****************************************************************************
- */
-#define LAN91C96_ARR_ALLOC_PN (0x7FU << 0)
-#define LAN91C96_ARR_FAILED (0x1U << 7)
-
-/*
- ****************************************************************************
- * FIFO Ports Register - Bank 2 - Offset 4
- ****************************************************************************
- */
-#define LAN91C96_FIFO_TX_DONE_PN (0x1FU << 0)
-#define LAN91C96_FIFO_TEMPTY (0x1U << 7)
-#define LAN91C96_FIFO_RX_DONE_PN (0x1FU << 8)
-#define LAN91C96_FIFO_RXEMPTY (0x1U << 15)
-
-/*
- ****************************************************************************
- * Pointer Register - Bank 2 - Offset 6
- ****************************************************************************
- */
-#define LAN91C96_PTR_LOW (0xFFU << 0)
-#define LAN91C96_PTR_HIGH (0x7U << 8)
-#define LAN91C96_PTR_AUTO_TX (0x1U << 11)
-#define LAN91C96_PTR_ETEN (0x1U << 12)
-#define LAN91C96_PTR_READ (0x1U << 13)
-#define LAN91C96_PTR_AUTO_INCR (0x1U << 14)
-#define LAN91C96_PTR_RCV (0x1U << 15)
-
-#define LAN91C96_PTR_RX_FRAME (LAN91C96_PTR_RCV | \
- LAN91C96_PTR_AUTO_INCR | \
- LAN91C96_PTR_READ)
-
-/*
- ****************************************************************************
- * Data Register - Bank 2 - Offset 8
- ****************************************************************************
- */
-#define LAN91C96_CONTROL_CRC (0x1U << 4) /* CRC bit */
-#define LAN91C96_CONTROL_ODD (0x1U << 5) /* ODD bit */
-
-/*
- ****************************************************************************
- * Interrupt Status Register - Bank 2 - Offset 12
- ****************************************************************************
- */
-#define LAN91C96_IST_RCV_INT (0x1U << 0)
-#define LAN91C96_IST_TX_INT (0x1U << 1)
-#define LAN91C96_IST_TX_EMPTY_INT (0x1U << 2)
-#define LAN91C96_IST_ALLOC_INT (0x1U << 3)
-#define LAN91C96_IST_RX_OVRN_INT (0x1U << 4)
-#define LAN91C96_IST_EPH_INT (0x1U << 5)
-#define LAN91C96_IST_ERCV_INT (0x1U << 6)
-#define LAN91C96_IST_RX_IDLE_INT (0x1U << 7)
-
-/*
- ****************************************************************************
- * Interrupt Acknowledge Register - Bank 2 - Offset 12
- ****************************************************************************
- */
-#define LAN91C96_ACK_TX_INT (0x1U << 1)
-#define LAN91C96_ACK_TX_EMPTY_INT (0x1U << 2)
-#define LAN91C96_ACK_RX_OVRN_INT (0x1U << 4)
-#define LAN91C96_ACK_ERCV_INT (0x1U << 6)
-
-/*
- ****************************************************************************
- * Interrupt Mask Register - Bank 2 - Offset 13
- ****************************************************************************
- */
-#define LAN91C96_MSK_RCV_INT (0x1U << 0)
-#define LAN91C96_MSK_TX_INT (0x1U << 1)
-#define LAN91C96_MSK_TX_EMPTY_INT (0x1U << 2)
-#define LAN91C96_MSK_ALLOC_INT (0x1U << 3)
-#define LAN91C96_MSK_RX_OVRN_INT (0x1U << 4)
-#define LAN91C96_MSK_EPH_INT (0x1U << 5)
-#define LAN91C96_MSK_ERCV_INT (0x1U << 6)
-#define LAN91C96_MSK_TX_IDLE_INT (0x1U << 7)
-
-/*
- ****************************************************************************
- * Bank 3 Register Map in I/O Space
- **************************************************************************
- */
-#define LAN91C96_MGMT_MDO (0x1U << 0)
-#define LAN91C96_MGMT_MDI (0x1U << 1)
-#define LAN91C96_MGMT_MCLK (0x1U << 2)
-#define LAN91C96_MGMT_MDOE (0x1U << 3)
-#define LAN91C96_MGMT_LOW_ID (0x3U << 4)
-#define LAN91C96_MGMT_IOS0 (0x1U << 8)
-#define LAN91C96_MGMT_IOS1 (0x1U << 9)
-#define LAN91C96_MGMT_IOS2 (0x1U << 10)
-#define LAN91C96_MGMT_nXNDEC (0x1U << 11)
-#define LAN91C96_MGMT_HIGH_ID (0x3U << 12)
-
-/*
- ****************************************************************************
- * Revision Register - Bank 3 - Offset 10
- ****************************************************************************
- */
-#define LAN91C96_REV_REVID (0xFU << 0)
-#define LAN91C96_REV_CHIPID (0xFU << 4)
-
-/*
- ****************************************************************************
- * Early RCV Register - Bank 3 - Offset 12
- ****************************************************************************
- */
-#define LAN91C96_ERCV_THRESHOLD (0x1FU << 0)
-#define LAN91C96_ERCV_RCV_DISCRD (0x1U << 7)
-
-/*
- ****************************************************************************
- * PCMCIA Configuration Registers
- ****************************************************************************
- */
-#define LAN91C96_ECOR 0x8000 /* Ethernet Configuration Register */
-#define LAN91C96_ECSR 0x8002 /* Ethernet Configuration and Status */
-
-/*
- ****************************************************************************
- * PCMCIA Ethernet Configuration Option Register (ECOR)
- ****************************************************************************
- */
-#define LAN91C96_ECOR_ENABLE (0x1U << 0)
-#define LAN91C96_ECOR_WR_ATTRIB (0x1U << 2)
-#define LAN91C96_ECOR_LEVEL_REQ (0x1U << 6)
-#define LAN91C96_ECOR_SRESET (0x1U << 7)
-
-/*
- ****************************************************************************
- * PCMCIA Ethernet Configuration and Status Register (ECSR)
- ****************************************************************************
- */
-#define LAN91C96_ECSR_INTR (0x1U << 1)
-#define LAN91C96_ECSR_PWRDWN (0x1U << 2)
-#define LAN91C96_ECSR_IOIS8 (0x1U << 5)
-
-/*
- ****************************************************************************
- * Receive Frame Status Word - See page 38 of the LAN91C96 specification.
- ****************************************************************************
- */
-#define LAN91C96_TOO_SHORT (0x1U << 10)
-#define LAN91C96_TOO_LONG (0x1U << 11)
-#define LAN91C96_ODD_FRM (0x1U << 12)
-#define LAN91C96_BAD_CRC (0x1U << 13)
-#define LAN91C96_BROD_CAST (0x1U << 14)
-#define LAN91C96_ALGN_ERR (0x1U << 15)
-
-#define FRAME_FILTER (LAN91C96_TOO_SHORT | LAN91C96_TOO_LONG | LAN91C96_BAD_CRC | LAN91C96_ALGN_ERR)
-
-/*
- ****************************************************************************
- * Default MAC Address
- ****************************************************************************
- */
-#define MAC_DEF_HI 0x0800
-#define MAC_DEF_MED 0x3333
-#define MAC_DEF_LO 0x0100
-
-/*
- ****************************************************************************
- * Default I/O Signature - 0x33
- ****************************************************************************
- */
-#define LAN91C96_LOW_SIGNATURE (0x33U << 0)
-#define LAN91C96_HIGH_SIGNATURE (0x33U << 8)
-#define LAN91C96_SIGNATURE (LAN91C96_HIGH_SIGNATURE | LAN91C96_LOW_SIGNATURE)
-
-#define LAN91C96_MAX_PAGES 6 /* Maximum number of 256 pages. */
-#define ETHERNET_MAX_LENGTH 1514
-
-
-/*-------------------------------------------------------------------------
- * I define some macros to make it easier to do somewhat common
- * or slightly complicated, repeated tasks.
- *-------------------------------------------------------------------------
- */
-
-/* select a register bank, 0 to 3 */
-
-#define SMC_SELECT_BANK(edev, x) { SMC_outw(edev, x, LAN91C96_BANK_SELECT); }
-
-/* this enables an interrupt in the interrupt mask register */
-#define SMC_ENABLE_INT(edev, x) {\
- unsigned char mask;\
- SMC_SELECT_BANK(edev, 2);\
- mask = SMC_inb(edev, LAN91C96_INT_MASK);\
- mask |= (x);\
- SMC_outb(edev, mask, LAN91C96_INT_MASK); \
-}
-
-/* this disables an interrupt from the interrupt mask register */
-
-#define SMC_DISABLE_INT(edev, x) {\
- unsigned char mask;\
- SMC_SELECT_BANK(edev, 2);\
- mask = SMC_inb(edev, LAN91C96_INT_MASK);\
- mask &= ~(x);\
- SMC_outb(edev, mask, LAN91C96_INT_MASK); \
-}
-
-/*----------------------------------------------------------------------
- * Define the interrupts that I want to receive from the card
- *
- * I want:
- * LAN91C96_IST_EPH_INT, for nasty errors
- * LAN91C96_IST_RCV_INT, for happy received packets
- * LAN91C96_IST_RX_OVRN_INT, because I have to kick the receiver
- *-------------------------------------------------------------------------
- */
-#define SMC_INTERRUPT_MASK (LAN91C96_IST_EPH_INT | LAN91C96_IST_RX_OVRN_INT | LAN91C96_IST_RCV_INT)
-
-#endif /* _LAN91C96_H_ */
--
2.25.1
More information about the U-Boot
mailing list