[PATCH v11 03/14] crypto/fsl: i.MX8M: Enable Job ring driver model.
Gaurav Jain
gaurav.jain at nxp.com
Thu Mar 24 07:20:27 CET 2022
i.MX8MM/MN/MP/MQ - added support for JR driver model.
sec is initialized based on job ring information processed
from device tree.
Signed-off-by: Gaurav Jain <gaurav.jain at nxp.com>
Reviewed-by: Ye Li <ye.li at nxp.com>
---
arch/arm/Kconfig | 2 +-
arch/arm/mach-imx/imx8m/Kconfig | 13 +++++++++++++
arch/arm/mach-imx/imx8m/soc.c | 11 ++++++++++-
board/freescale/imx8mm_evk/spl.c | 10 +++++++++-
board/freescale/imx8mn_evk/spl.c | 9 +++++++--
board/freescale/imx8mp_evk/spl.c | 14 ++++++++++++--
board/freescale/imx8mq_evk/spl.c | 8 ++++++--
7 files changed, 58 insertions(+), 9 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4567c183fb..f207e709d4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -817,7 +817,7 @@ config ARCH_IMX8M
select ARM64
select GPIO_EXTRA_HEADER
select MACH_IMX
- select SYS_FSL_HAS_SEC if IMX_HAB
+ select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
select SYS_I2C_MXC
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index fae7049995..f564e0dd6f 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -39,6 +39,9 @@ config TARGET_IMX8MQ_EVK
select BINMAN
select IMX8MQ
select IMX8M_LPDDR4
+ select FSL_CAAM
+ select ARCH_MISC_INIT
+ select SPL_CRYPTO if SPL
config TARGET_IMX8MQ_PHANBELL
bool "imx8mq_phanbell"
@@ -52,6 +55,9 @@ config TARGET_IMX8MM_EVK
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
+ select FSL_CAAM
+ select ARCH_MISC_INIT
+ select SPL_CRYPTO if SPL
config TARGET_IMX8MM_ICORE_MX8MM
bool "Engicam i.Core MX8M Mini SOM"
@@ -91,6 +97,8 @@ config TARGET_IMX8MN_EVK
select IMX8MN
select SUPPORT_SPL
select IMX8M_LPDDR4
+ select FSL_CAAM
+ select SPL_CRYPTO if SPL
config TARGET_IMX8MN_DDR4_EVK
bool "imx8mn DDR4 EVK board"
@@ -98,6 +106,8 @@ config TARGET_IMX8MN_DDR4_EVK
select IMX8MN
select SUPPORT_SPL
select IMX8M_DDR4
+ select FSL_CAAM
+ select SPL_CRYPTO if SPL
config TARGET_IMX8MN_VENICE
bool "Support Gateworks Venice iMX8M Nano module"
@@ -112,6 +122,9 @@ config TARGET_IMX8MP_EVK
select IMX8MP
select SUPPORT_SPL
select IMX8M_LPDDR4
+ select FSL_CAAM
+ select ARCH_MISC_INIT
+ select SPL_CRYPTO if SPL
config TARGET_PICO_IMX8MQ
bool "Support Technexion Pico iMX8MQ"
diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index 1a5a391443..17efe37447 100644
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2017-2019 NXP
+ * Copyright 2017-2019, 2021 NXP
*
* Peng Fan <peng.fan at nxp.com>
*/
@@ -20,6 +20,7 @@
#include <asm/ptrace.h>
#include <asm/armv8/mmu.h>
#include <dm/uclass.h>
+#include <dm/device.h>
#include <efi_loader.h>
#include <env.h>
#include <env_internal.h>
@@ -1210,6 +1211,14 @@ static void acquire_buildinfo(void)
int arch_misc_init(void)
{
+ if (IS_ENABLED(CONFIG_FSL_CAAM)) {
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
+ if (ret)
+ printf("Failed to initialize %s: %d\n", dev->name, ret);
+ }
acquire_buildinfo();
return 0;
diff --git a/board/freescale/imx8mm_evk/spl.c b/board/freescale/imx8mm_evk/spl.c
index 4ef7f6f180..cf4882cd10 100644
--- a/board/freescale/imx8mm_evk/spl.c
+++ b/board/freescale/imx8mm_evk/spl.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2019 NXP
+ * Copyright 2019, 2021 NXP
*/
#include <common.h>
@@ -51,6 +51,14 @@ static void spl_dram_init(void)
void spl_board_init(void)
{
+ if (IS_ENABLED(CONFIG_FSL_CAAM)) {
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
+ if (ret)
+ printf("Failed to initialize %s: %d\n", dev->name, ret);
+ }
puts("Normal Boot\n");
}
diff --git a/board/freescale/imx8mn_evk/spl.c b/board/freescale/imx8mn_evk/spl.c
index 03f2a56e80..dfa81a0d65 100644
--- a/board/freescale/imx8mn_evk/spl.c
+++ b/board/freescale/imx8mn_evk/spl.c
@@ -1,7 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * Copyright 2018-2019 NXP
+ * Copyright 2018-2019, 2021 NXP
*
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
@@ -49,6 +49,11 @@ void spl_board_init(void)
struct udevice *dev;
int ret;
+ if (IS_ENABLED(CONFIG_FSL_CAAM)) {
+ ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
+ if (ret)
+ printf("Failed to initialize %s: %d\n", dev->name, ret);
+ }
puts("Normal Boot\n");
ret = uclass_get_device_by_name(UCLASS_CLK,
diff --git a/board/freescale/imx8mp_evk/spl.c b/board/freescale/imx8mp_evk/spl.c
index eca42c756e..503a752ae9 100644
--- a/board/freescale/imx8mp_evk/spl.c
+++ b/board/freescale/imx8mp_evk/spl.c
@@ -1,7 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * Copyright 2018-2019 NXP
+ * Copyright 2018-2019, 2021 NXP
*
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
@@ -20,6 +20,8 @@
#include <asm/arch/ddr.h>
#include <power/pmic.h>
#include <power/pca9450.h>
+#include <dm/uclass.h>
+#include <dm/device.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -35,6 +37,14 @@ void spl_dram_init(void)
void spl_board_init(void)
{
+ if (IS_ENABLED(CONFIG_FSL_CAAM)) {
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
+ if (ret)
+ printf("Failed to initialize %s: %d\n", dev->name, ret);
+ }
/*
* Set GIC clock to 500Mhz for OD VDD_SOC. Kernel driver does
* not allow to change it. Should set the clock after PMIC
diff --git a/board/freescale/imx8mq_evk/spl.c b/board/freescale/imx8mq_evk/spl.c
index 67d069b2b0..b28056bb48 100644
--- a/board/freescale/imx8mq_evk/spl.c
+++ b/board/freescale/imx8mq_evk/spl.c
@@ -1,8 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2018 NXP
+ * Copyright 2018, 2021 NXP
*
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
@@ -22,6 +21,7 @@
#include <asm/mach-imx/gpio.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <fsl_esdhc_imx.h>
+#include <fsl_sec.h>
#include <mmc.h>
#include <linux/delay.h>
#include <power/pmic.h>
@@ -199,6 +199,10 @@ int power_init_board(void)
void spl_board_init(void)
{
+ if (IS_ENABLED(CONFIG_FSL_CAAM)) {
+ if (sec_init())
+ printf("\nsec_init failed!\n");
+ }
puts("Normal Boot\n");
}
--
2.17.1
More information about the U-Boot
mailing list