[PATCH 1/2] mmc: fix error message for unaligned erase request

[Jaehoon Chung]

On 2/16/22 00:23, Patrick Delaunay wrote:
> Fix the end address in the message for unaligned erase request in
> mmc_berase() when start + blkcnt is aligned to erase_grp_size.
> 
> for example:
>   - start = 0x2000 - 26
>   - count = 26
>   - erase_grp_size = 0x400
> 
>   Caution! Your devices Erase group is 0x400
>   The erase range would be change to 0x2000~0x27ff
> 
> But no issue when the end address is not aligned, for example
>   - start = 0x2000 - 2 * 26
>   - count = 26
>   - erase_grp_size = 0x400
> 
>   Caution! Your devices Erase group is 0x400
>   The erase range would be change to 0x2000~0x23ff
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>

Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>

Best Regards,
Jaehoon Chung

> ---
> 
>  drivers/mmc/mmc_write.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/mmc_write.c b/drivers/mmc/mmc_write.c
> index d23b7d9729..eab94c7b60 100644
> --- a/drivers/mmc/mmc_write.c
> +++ b/drivers/mmc/mmc_write.c
> @@ -102,7 +102,7 @@ ulong mmc_berase(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt)
>  		       "The erase range would be change to "
>  		       "0x" LBAF "~0x" LBAF "\n\n",
>  		       mmc->erase_grp_size, start & ~(mmc->erase_grp_size - 1),
> -		       ((start + blkcnt + mmc->erase_grp_size)
> +		       ((start + blkcnt + mmc->erase_grp_size - 1)
>  		       & ~(mmc->erase_grp_size - 1)) - 1);
>  
>  	while (blk < blkcnt) {