[PATCH] ARM: mvebu: x530: clearfog: Add ODT configuration

[Stefan Roese]

On 3/1/22 01:53, Chris Packham wrote:
> Commit 369e532691e0 ("ddr: marvell: a38x: allow board specific ODT
> configuration") added the odt_config member to struct
> mv_ddr_topology_map ahead of the clk_enable and ck_delay members. This
> means that any boards that configured either of clk_enable or ck_delay
> needed to have their board topology updated. This affects the x530 and
> clearfog boards. Other A38x boards don't touch any of the trailing
> members of mv_ddr_topology_map so don't need updating.
> 
> Fixes: 369e532691e0 ("ddr: marvell: a38x: allow board specific ODT configuration")
> Signed-off-by: Chris Packham <judge.packham at gmail.com>

Applied to u-boot-marvell/master

Thanks,
Stefan

> ---
> 
>   board/alliedtelesis/x530/x530.c    | 1 +
>   board/solidrun/clearfog/clearfog.c | 1 +
>   2 files changed, 2 insertions(+)
> 
> diff --git a/board/alliedtelesis/x530/x530.c b/board/alliedtelesis/x530/x530.c
> index 8b31045a0743..c0ec2afa3011 100644
> --- a/board/alliedtelesis/x530/x530.c
> +++ b/board/alliedtelesis/x530/x530.c
> @@ -73,6 +73,7 @@ static struct mv_ddr_topology_map board_topology_map = {
>   	{0},				/* timing parameters */
>   	{ {0} },			/* electrical configuration */
>   	{0},				/* electrical parameters */
> +	0,				/* ODT configuration */
>   	0,				/* Clock enable mask */
>   	160				/* Clock delay */
>   };
> diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c
> index c920cf8d6b50..03adb591d826 100644
> --- a/board/solidrun/clearfog/clearfog.c
> +++ b/board/solidrun/clearfog/clearfog.c
> @@ -147,6 +147,7 @@ static struct mv_ddr_topology_map board_topology_map = {
>   	{0},				/* timing parameters */
>   	{ {0} },			/* electrical configuration */
>   	{0,},				/* electrical parameters */
> +	0,				/* ODT configuration */
>   	0x3,				/* clock enable mask */
>   };
>   

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de