u-boot v2022.01 and Arria-10 socdk not booting

[Fabio Estevam]

Adding the arria10-socdk board maintainers on Cc

On Wed, Mar 16, 2022 at 9:25 AM Marcel Gielen [Celestia-STS]
<M.Gielen at celestia-sts.com> wrote:
>
> I am working on an Enclustra mercury board and had some issues with booting, which stopped after (successful) FPGA configuration. (Console: FPGA: Enter user mode is the last line printed)
>
> Since we also have an Arria10 socdk available, I decided to try that one.   For the sockdk I have a working sdcard, which also includes a FitImage  containing a peripheral and core rbf. I tried the card (boots)
> replaced the bootloader with a vanilla built socfpga_arria10_defconfig and booting seems to stop at a similar point.  Last console message: "early release succeeded" and then it stops.
>
>
> Am I overlooking something, or are there issues with mainline u-boot and arria10 ?
>
>
> Any suggestions where to look ?
>
>
>
>
>
>