[PATCH] board: gateworks venice: add support for GPY111 phy

[Tim Harvey]

The TI DP83867 phy has been replaced with the MaxLinear GPY111 phy due
to part availability.

Add support for it by adding LED config and dt-prop based internal delay
config tx-delay/rx-delay per PHY ID.

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 board/gateworks/venice/venice.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/board/gateworks/venice/venice.c b/board/gateworks/venice/venice.c
index 5334500ef6a7..425c69056da5 100644
--- a/board/gateworks/venice/venice.c
+++ b/board/gateworks/venice/venice.c
@@ -63,6 +63,7 @@ static int setup_fec(void)
 int board_phy_config(struct phy_device *phydev)
 {
 	unsigned short val;
+	ofnode node;
 
 	switch (phydev->phy_id) {
 	case 0x2000a231: /* TI DP83867 GbE PHY */
@@ -73,6 +74,21 @@ int board_phy_config(struct phy_device *phydev)
 		val |= 0xb << 8; /* LED2(Green;Link/Act): blink for TX/RX act */
 		phy_write(phydev, MDIO_DEVAD_NONE, 24, val);
 		break;
+	case 0xd565a401: /* MaxLinear GPY111 */
+		puts("GPY111 ");
+		node = phy_get_ofnode(phydev);
+		if (ofnode_valid(node)) {
+			u32 rx_delay, tx_delay;
+
+			rx_delay = ofnode_read_u32_default(node, "rx-internal-delay-ps", 2000);
+			tx_delay = ofnode_read_u32_default(node, "tx-internal-delay-ps", 2000);
+			val = phy_read(phydev, MDIO_DEVAD_NONE, 0x17);
+			val &= ~((0x7 << 12) | (0x7 << 8));
+			val |= (rx_delay / 500) << 12;
+			val |= (tx_delay / 500) << 8;
+			phy_write(phydev, MDIO_DEVAD_NONE, 0x17, val);
+		}
+		break;
 	}
 
 	if (phydev->drv->config)
-- 
2.17.1