[PATCH 0/6] Add MV88E61xx DSA driver and use on gwventana

[Tim Harvey]

This series adds a DSA driver for the MV88E61xx based on
drivers/net/phy/mv88e61xx and uses in on the gwventana_gw5904_defconfig.

The hope is that the other three boards that use the MV88E61xx driver
can move to this as well eventually so that we can remove the non-dm
driver and the 4 Kconfig options it requires.

The MV88E61xx has an MDIO interface this DM_MDIO must be used so support
for a UCLASS_MDIO driver is added to the fec_mxc ethernet driver in a
way that allows a fallback to the previous non DM_MDIO case as there are
many boards out there using this driver that define DM_MDIO but do not
have the required dt props for a DM_MDIO driver which would cause a
regression.

Additionally a patch to ensure MDIO children are scanned on post-bind is
needed.

I'm making use of the dm_mdio_read/dm_mdio_write wrapper from Merak that
is pending so it is in this series as well.

Best Regards,

Tim

Tim Harvey (6):
  net: mdio-uclass: scan for dm mdio children on post-bind
  net: dsa: move cpu port probe to dsa_post_probe
  net: mdio-uclass: add wrappers for read/write/reset operations
  net: fec: add support for DM_MDIO
  net: add MV88E61xx DSA driver
  board: gw_ventana: enable MV88E61XX DSA support

 arch/arm/dts/imx6qdl-gw5904.dtsi        |  35 +
 board/gateworks/gw_ventana/gw_ventana.c |  50 +-
 configs/gwventana_gw5904_defconfig      |   7 +-
 drivers/net/Kconfig                     |   7 +
 drivers/net/Makefile                    |   1 +
 drivers/net/fec_mxc.c                   | 113 ++-
 drivers/net/fec_mxc.h                   |   1 +
 drivers/net/mv88e61xx.c                 | 982 ++++++++++++++++++++++++
 include/miiphy.h                        |  31 +
 net/dsa-uclass.c                        |  14 +-
 net/mdio-uclass.c                       |  35 +
 11 files changed, 1227 insertions(+), 49 deletions(-)
 create mode 100644 drivers/net/mv88e61xx.c

-- 
2.17.1