[PATCH 0/7] Add Gateworks System Controller driver

[Tim Harvey]

On Mon, Mar 7, 2022 at 4:24 PM Tim Harvey <tharvey at gateworks.com> wrote:
>
> This series Adds a driver for the Gateworks System Controller (GSC)
> present on boards from Gateworks Corporation.
>
> Patches 1-4 are gw_ventana cleanups to prepare for using the DM_I2C
> based driver.
> Patch 5 is for the driver itself
> Patch 6 moves gw_ventana over to using the GSC driver
> Patch 7 moves venice over to using the GSC driver
>
> Tim
>
> Tim Harvey (7):
>   board: gateworks: gw_ventana: convert to DM_I2C
>   board: gateworks: gw_ventana: move SPL uart config out of common
>   board: gateworks: gw_ventana: move GPIO config out of common
>   board: gateworks: gw_ventana: move ft_early_fixups out of common
>   drivers: misc: add Gateworks System Controller driver
>   board: gateworks: gw_ventana: use comomn GSC driver
>   board: gateworks: venice: use common GSC driver
>
>  MAINTAINERS                                   |   6 +
>  arch/arm/dts/imx8mm-venice-u-boot.dtsi        |   4 +
>  arch/arm/dts/imx8mm-venice.dts                |   7 +
>  arch/arm/dts/imx8mn-venice-u-boot.dtsi        |   4 +
>  arch/arm/dts/imx8mn-venice.dts                |   7 +
>  arch/arm/mach-imx/imx8m/Kconfig               |   4 +
>  arch/arm/mach-imx/mx6/Kconfig                 |   2 +
>  board/gateworks/gw_ventana/Kconfig            |   8 -
>  board/gateworks/gw_ventana/Makefile           |   2 +-
>  board/gateworks/gw_ventana/common.c           | 527 +------------
>  board/gateworks/gw_ventana/common.h           |  14 +-
>  board/gateworks/gw_ventana/eeprom.c           | 224 +++++-
>  .../gw_ventana/{ventana_eeprom.h => eeprom.h} |  16 +-
>  board/gateworks/gw_ventana/gsc.c              | 425 -----------
>  board/gateworks/gw_ventana/gsc.h              |  71 --
>  board/gateworks/gw_ventana/gw_ventana.c       | 290 ++++++--
>  board/gateworks/gw_ventana/gw_ventana_spl.c   | 311 +++++++-
>  board/gateworks/venice/Makefile               |   2 +-
>  board/gateworks/venice/eeprom.c               | 353 +++++++++
>  board/gateworks/venice/{gsc.h => eeprom.h}    |  26 +-
>  board/gateworks/venice/gsc.c                  | 700 ------------------
>  board/gateworks/venice/spl.c                  |  53 +-
>  board/gateworks/venice/venice.c               |  27 +-
>  configs/gwventana_emmc_defconfig              |   4 +-
>  configs/gwventana_gw5904_defconfig            |   4 +-
>  configs/gwventana_nand_defconfig              |   4 +-
>  configs/imx8mm_venice_defconfig               |   1 +
>  configs/imx8mn_venice_defconfig               |   3 +-
>  drivers/misc/Kconfig                          |   8 +
>  drivers/misc/Makefile                         |   1 +
>  drivers/misc/gsc.c                            | 633 ++++++++++++++++
>  include/configs/gw_ventana.h                  |   3 -
>  include/gsc.h                                 |  21 +
>  scripts/config_whitelist.txt                  |   1 -
>  34 files changed, 1866 insertions(+), 1900 deletions(-)
>  rename board/gateworks/gw_ventana/{ventana_eeprom.h => eeprom.h} (82%)
>  delete mode 100644 board/gateworks/gw_ventana/gsc.c
>  delete mode 100644 board/gateworks/gw_ventana/gsc.h
>  create mode 100644 board/gateworks/venice/eeprom.c
>  rename board/gateworks/venice/{gsc.h => eeprom.h} (55%)
>  delete mode 100644 board/gateworks/venice/gsc.c
>  create mode 100644 drivers/misc/gsc.c
>  create mode 100644 include/gsc.h
>
> --
> 2.17.1
>

Added uboot-imx at nxp.com and Peng to list.

Would anyone have time to review this series [1]? I would like to get
any issues resolved by the time the next merge window opens up.

Best Regards,

Tim
[1] https://patchwork.ozlabs.org/project/uboot/list/?series=289400