[PATCH 4/6] net: fec: add support for DM_MDIO
Vladimir Oltean
vladimir.oltean at nxp.com
Thu Mar 31 19:01:31 CEST 2022
On Tue, Mar 29, 2022 at 03:52:38PM -0700, Tim Harvey wrote:
> Add support for DM_MDIO by registering a UCLASS_MDIO driver and
> attempting to use it. This is necessary if wanting to use a DSA
> driver for example hanging off of the FEC MAC.
>
> Care is taken to fallback to non DM_MDIO as several boards define
> DM_MDIO without having the proper device-tree configuration necessary
> such as an mdio subnode, a phy-mode prop, and either a valid phy-handle
> prop or fixed-phy subnode.
>
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> ---
> drivers/net/fec_mxc.c | 113 ++++++++++++++++++++++++++++++++++++++----
> drivers/net/fec_mxc.h | 1 +
> 2 files changed, 104 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
> index e8ebef09032a..374ef9d67d5e 100644
> --- a/drivers/net/fec_mxc.c
> +++ b/drivers/net/fec_mxc.c
> @@ -30,6 +30,8 @@
> #include <asm/arch/imx-regs.h>
> #include <asm/mach-imx/sys_proto.h>
> #include <asm-generic/gpio.h>
> +#include <dm/device_compat.h>
> +#include <dm/lists.h>
>
> #include "fec_mxc.h"
> #include <eth_phy.h>
> @@ -1025,6 +1027,80 @@ struct mii_dev *fec_get_miibus(ulong base_addr, int dev_id)
> return bus;
> }
>
> +#ifdef CONFIG_DM_MDIO
> +struct dm_fec_mdio_priv {
> + struct ethernet_regs *regs;
> +};
> +
> +static int dm_fec_mdio_read(struct udevice *dev, int addr, int devad, int reg)
> +{
> + struct dm_fec_mdio_priv *priv = dev_get_priv(dev);
> +
> + return fec_mdio_read(priv->regs, addr, reg);
> +}
> +
> +static int dm_fec_mdio_write(struct udevice *dev, int addr, int devad, int reg, u16 data)
> +{
> + struct dm_fec_mdio_priv *priv = dev_get_priv(dev);
> +
> + return fec_mdio_write(priv->regs, addr, reg, data);
> +}
> +
> +static const struct mdio_ops dm_fec_mdio_ops = {
> + .read = dm_fec_mdio_read,
> + .write = dm_fec_mdio_write,
> +};
> +
> +static int dm_fec_mdio_probe(struct udevice *dev)
> +{
> + struct dm_fec_mdio_priv *priv = dev_get_priv(dev);
> +
> + priv->regs = (struct ethernet_regs *)ofnode_get_addr(dev_ofnode(dev->parent));
> +
> + return 0;
> +}
> +
> +U_BOOT_DRIVER(fec_mdio) = {
> + .name = "fec_mdio",
> + .id = UCLASS_MDIO,
> + .probe = dm_fec_mdio_probe,
> + .ops = &dm_fec_mdio_ops,
> + .priv_auto = sizeof(struct dm_fec_mdio_priv),
> +};
> +
> +static int dm_fec_bind_mdio(struct udevice *dev)
> +{
> + struct udevice *mdiodev;
> + const char *name;
> + ofnode mdio;
> + int ret;
> +
> + /* for a UCLASS_MDIO driver we need to bind and probe manually
> + * for an internal MDIO bus that has no dt compatible of its own
> + */
> + ofnode_for_each_subnode(mdio, dev_ofnode(dev)) {
> + name = ofnode_get_name(mdio);
> +
> + if (strcmp(name, "mdio"))
> + continue;
> +
> + ret = device_bind_driver_to_node(dev, "fec_mdio",
> + name, mdio, &mdiodev);
> + if (ret)
> + return ret;
> +
> + /* need to probe it as there is no compatible to do so */
> + ret = uclass_get_device_by_ofnode(UCLASS_MDIO, mdio, &mdiodev);
> + if (!ret)
> + return 0;
> +
> + break;
> + }
> +
> + return ret;
> +}
> +#endif
> +
On which branch does this apply? The context above fecmxc_read_rom_hwaddr()
is different in the branches I've checked:
https://source.denx.de/u-boot/u-boot/-/blob/master/drivers/net/fec_mxc.c#L1276
https://source.denx.de/u-boot/custodians/u-boot-net/-/blob/next/drivers/net/fec_mxc.c#L1276
> static int fecmxc_read_rom_hwaddr(struct udevice *dev)
> {
> struct fec_priv *priv = dev_get_priv(dev);
> @@ -1088,7 +1164,7 @@ static int device_get_phy_addr(struct fec_priv *priv, struct udevice *dev)
>
> static int fec_phy_init(struct fec_priv *priv, struct udevice *dev)
> {
> - struct phy_device *phydev;
> + struct phy_device *phydev = NULL;
> int addr;
>
> addr = device_get_phy_addr(priv, dev);
> @@ -1096,7 +1172,12 @@ static int fec_phy_init(struct fec_priv *priv, struct udevice *dev)
> addr = CONFIG_FEC_MXC_PHYADDR;
> #endif
>
> - phydev = phy_connect(priv->bus, addr, dev, priv->interface);
> +#ifdef CONFIG_DM_MDIO
> + if (priv->dm_mdio)
> + phydev = dm_eth_phy_connect(dev);
> +#endif
> + if (!phydev)
> + phydev = phy_connect(priv->bus, addr, dev, priv->interface);
> if (!phydev)
> return -ENODEV;
>
> @@ -1227,11 +1308,19 @@ static int fecmxc_probe(struct udevice *dev)
>
> priv->dev_id = dev_seq(dev);
>
> +#ifdef CONFIG_DM_MDIO
> + ret = dm_fec_bind_mdio(dev);
> + if (!ret) {
> + ret = fec_phy_init(priv, dev);
> + if (!ret)
> + priv->dm_mdio = true;
> + }
> +#endif
> #ifdef CONFIG_DM_ETH_PHY
> bus = eth_phy_get_mdio_bus(dev);
> #endif
>
> - if (!bus) {
> + if (!bus && !priv->dm_mdio) {
> dm_mii_bus = false;
> #ifdef CONFIG_FEC_MXC_MDIO_BASE
> bus = fec_get_miibus((ulong)CONFIG_FEC_MXC_MDIO_BASE,
> @@ -1240,7 +1329,7 @@ static int fecmxc_probe(struct udevice *dev)
> bus = fec_get_miibus((ulong)priv->eth, dev_seq(dev));
> #endif
> }
> - if (!bus) {
> + if (!bus && !priv->dm_mdio) {
> ret = -ENOMEM;
> goto err_mii;
> }
> @@ -1271,14 +1360,16 @@ static int fecmxc_probe(struct udevice *dev)
> break;
> }
>
> - ret = fec_phy_init(priv, dev);
> - if (ret)
> - goto err_phy;
> + if (!priv->dm_mdio) {
> + ret = fec_phy_init(priv, dev);
> + if (ret)
> + goto err_phy;
> + }
>
> return 0;
>
> err_phy:
> - if (!dm_mii_bus) {
> + if (!dm_mii_bus && !priv->dm_mdio) {
> mdio_unregister(bus);
> free(bus);
> }
> @@ -1294,8 +1385,10 @@ static int fecmxc_remove(struct udevice *dev)
>
> free(priv->phydev);
> fec_free_descs(priv);
> - mdio_unregister(priv->bus);
> - mdio_free(priv->bus);
> + if (priv->bus) {
> + mdio_unregister(priv->bus);
> + mdio_free(priv->bus);
> + }
>
> #ifdef CONFIG_DM_REGULATOR
> if (priv->phy_supply)
> diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h
> index 48faa33d66ec..c297880ccc54 100644
> --- a/drivers/net/fec_mxc.h
> +++ b/drivers/net/fec_mxc.h
> @@ -248,6 +248,7 @@ struct fec_priv {
> uint8_t *tdb_ptr;
> int dev_id;
> struct mii_dev *bus;
> + bool dm_mdio;
> #ifdef CONFIG_PHYLIB
> struct phy_device *phydev;
> ofnode phy_of_node;
> --
> 2.17.1
>
More information about the U-Boot
mailing list